The T0SZ field of TCR_EL1 occupies bits 0-5 of the register and encode
the virtual address space translated by TTBR0_EL1. When updating the
field, for example because we are switching to/from the idmap page-table,
__cpu_set_tcr_t0sz() erroneously treats its 't0sz' argument as unshifted,
resulting in harmless but confusing double shifts by 0 in the code.
Co-developed-by: Leem ChaeHoon <infinite.run@gmail.com>
Signed-off-by: Leem ChaeHoon <infinite.run@gmail.com>
Signed-off-by: Seongsu Park <sgsu.park@samsung.com>
Link: https://lore.kernel.org/r/20240523122146.144483-1-sgsu.park@samsung.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit f240d3aaf5 ("f2fs: do more sanity check on inode") missed
to remove redundant sanity check on flexible_inline_xattr flag, fix
it.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add documentation for the WMI bus sysfs interface so userspace
applications can use it to access additional data about WMI devices.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240624173116.31314-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for forcing the WMI driver core to bind
a certain WMI driver to a WMI device. This will be
necessary to support generic WMI drivers without an
ID table
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240624173116.31314-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amba_register_dummy_clk() is called only once from acpi_amba_init()
and acpi_amba_init() itself is called once during the initialisation.
amba_dummy_clk can't be initialised before this in any other code
path and hence the check for already registered amba_dummy_clk is
not necessary. Drop the same.
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20240624023101.369633-1-youwan@nfschina.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword()
that return PCIBIOS_* codes but functions also return -ENODEV which are
not compatible error codes. As neither of the functions are related to
PCI read/write functions, they should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 4618441536 ("arch: x86: New MailBox support driver for Intel SOC's")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com
xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 3f2a230caf ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240527125538.13620-3-ilpo.jarvinen@linux.intel.com
intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 5b395e2be6 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240527125538.13620-2-ilpo.jarvinen@linux.intel.com
The distributor and PMR/RPR can present different views of the interrupt
priority space dependent upon the values of GICD_CTLR.DS and
SCR_EL3.FIQ. Currently we treat the distributor's view of the priority
space as canonical, and when the two differ we change the way we handle
values in the PMR/RPR, using the `gic_nonsecure_priorities` static key
to decide what to do.
This approach works, but it's sub-optimal. When using pseudo-NMI we
manipulate the distributor rarely, and we manipulate the PMR/RPR
registers very frequently in code spread out throughout the kernel (e.g.
local_irq_{save,restore}()). It would be nicer if we could use fixed
values for the PMR/RPR, and dynamically choose the values programmed
into the distributor.
This patch changes the GICv3 driver and arm64 code accordingly. PMR
values are chosen at compile time, and the GICv3 driver determines the
appropriate values to program into the distributor at boot time. This
removes the need for the `gic_nonsecure_priorities` static key and
results in smaller and better generated code for saving/restoring the
irqflags.
Before this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d503201f nop
| 10: d2800c00 mov x0, #0x60 // #96
| 14: d5184600 msr icc_pmr_el1, x0
| 18: d65f03c0 ret
| 1c: d2801400 mov x0, #0xa0 // #160
| 20: 17fffffd b 14 <outlined_local_irq_disable+0x14>
After this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d2801800 mov x0, #0xc0 // #192
| 10: d5184600 msr icc_pmr_el1, x0
| 14: d65f03c0 ret
... with 3 fewer instructions per call.
For defconfig + CONFIG_PSEUDO_NMI=y, this results in a minor saving of
~4K of text, and will make it easier to make further improvements to the
way we manipulate irqflags and DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time, dependent on the configuration of GICD_CTRL.DS
and SCR_EL3.FIQ. This will need to be chosen before we configure the
distributor with default prioirities for all the interrupts, which
happens before we currently detect these in gic_cpu_sys_reg_init().
Add a new gic_prio_init() function to detect these earlier and log them
to the console so that any problems can be debugged more easily. This
also allows the uniformity checks in gic_cpu_sys_reg_init() to be
simplified, as we can compare directly with the boot CPU values which
were recorded earlier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time.
In preparation for using dynamic priorities, place the priorities in
variables and update the code to pass these as parameters. Users of
GICD_INT_DEF_PRI_X4 are modified to replicate the priority byte using
REPEAT_BYTE_U32().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The gic_configure_irq(), gic_dist_config(), and gic_cpu_config()
functions each take an optional "sync_access" callback, but in almost
all cases this is not used. The only user is the GICv3 driver's
gic_cpu_init() function, which uses gic_redist_wait_for_rwp() as the
"sync_access" callback for gic_cpu_config().
It would be simpler and clearer to remove the callback and have the
GICv3 driver call gic_redist_wait_for_rwp() explicitly after
gic_cpu_config().
Remove the "sync_access" callback, and call gic_redist_wait_for_rwp()
explicitly in the GICv3 driver.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In some cases it's necessary to replicate a byte across a u32 value, for
which REPEAT_BYTE() would be helpful. Currently this requires explicit
masking of the result to avoid sparse warnings, as e.g.
(u32)REPEAT_BYTE(0xa0))
... will result in a warning:
cast truncates bits from constant value (a0a0a0a0a0a0a0a0 becomes a0a0a0a0)
Add a new REPEAT_BYTE_U32() which does the necessary masking internally,
so that we don't need to duplicate this for every usage.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
x86_of_pci_irq_enable() returns PCIBIOS_* code received from
pci_read_config_byte() directly and also -EINVAL which are not
compatible error types. x86_of_pci_irq_enable() is used as
(*pcibios_enable_irq) function which should not return PCIBIOS_* codes.
Convert the PCIBIOS_* return code from pci_read_config_byte() into
normal errno using pcibios_err_to_errno().
Fixes: 96e0a0797e ("x86: dtb: Add support for PCI devices backed by dtb nodes")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-1-ilpo.jarvinen@linux.intel.com
Fault status codes at page table level 0, 1, 2 and 3 for access, permission
and translation faults are architecturally organized in a way, that masking
out ESR_ELx_FSC_TYPE, fetches Level 0 status code for the respective fault.
Helpers like esr_fsc_is_[translation|permission|access_flag]_fault() mask
out ESR_ELx_FSC_TYPE before comparing against corresponding Level 0 status
code as the kernel does not yet care about the page table level, where in
the fault really occurred previously.
This scheme is starting to crumble after FEAT_LPA2 when level -1 got added.
Fault status code for translation fault at level -1 is 0x2B which does not
follow ESR_ELx_FSC_TYPE, requiring esr_fsc_is_translation_fault() changes.
This changes above helpers to compare against individual fault status code
values for each page table level and stop using ESR_ELx_FSC_TYPE, which is
losing its value as a common mask.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240618034703.3622510-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CTLs on older qualcomm SOCs like msm8953 and msm8996 has not got interrupts,
so better to skip CTL irq callback register/unregister
make dpu_ctl_cfg be able to define without intr_start.
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/596854/
Link: https://lore.kernel.org/r/20240509-ctl_irq-v1-1-9433f2da9dc7@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Allow board's device tree to specify the vsync source (aka TE source).
If the property is omitted, the display controller driver will use the
default setting.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: fixed clearing of return value if there is no TE property]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598740/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-6-67a0116b5366@linaro.org
The struct msm_display_info has is_te_using_watchdog_timer field which
is neither set anywhere nor is flexible enough to specify different
sources. Replace it with the field specifying the vsync source using
enum dpu_vsync_source.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598738/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-5-67a0116b5366@linaro.org
Command mode panels provide TE signal back to the DSI host to signal
that the frame display has completed and update of the image will not
cause tearing. Usually it is connected to the first GPIO with the
mdp_vsync function, which is the default. In such case the property can
be skipped.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598732/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-1-67a0116b5366@linaro.org
With WoWLAN enabled and after sleeping for a rather long time,
we are seeing that with some APs, it is not able to wake up
the STA though the correct wake up pattern has been configured.
This is because the host doesn't send keepalive command to
firmware, thus firmware will not send any packet to the AP and
after a specific time the AP kicks out the STA.
So enable keepalive before going to suspend and disable it after
resume back.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-9-quic_bqiang@quicinc.com
Host sets GTK related info to firmware before WoW is enabled, and
gets rekey replay_count and then disables GTK rekey when WoW quits.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-8-quic_bqiang@quicinc.com
Support ARP and NS offload in WoW state.
Tested this way: put machine A with QCA6390 to WoW state,
ping/ping6 machine A from another machine B, check sniffer to see
any ARP response and Neighbor Advertisement from machine A.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-7-quic_bqiang@quicinc.com
Host needs to set hardware data filter before entering WoW to
let firmware drop needless broadcast/multicast frames to avoid
frequent wakeup. Host clears hardware data filter when leaving WoW.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-6-quic_bqiang@quicinc.com
Implement net-detect feature by setting flag
WIPHY_WOWLAN_NET_DETECT if firmware supports this
feature. Driver sets the related PNO configuration
to firmware before entering WoW and firmware then
scans periodically and wakes up host if a specific
SSID is found.
Note that firmware crashes if we enable it for both
P2P vdev and station vdev simultaneously because
firmware can only support one vdev at a time. Since
there is rare scenario for a P2P vdev to do net-detect,
skip it for P2P vdevs.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-5-quic_bqiang@quicinc.com
Implement basic WoW functionalities such as magic-packet, disconnect
and pattern. The logic is very similar to ath11k.
When WoW is configured, ath12k_core_suspend and ath12k_core_resume
are skipped (by checking ar->state) as we are not allowed to power
cycle firmware.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-4-quic_bqiang@quicinc.com
Implement WoW enable and WoW wakeup commands which are needed
for suspend/resume.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-3-quic_bqiang@quicinc.com
Currently there is no dedicated log level for WoW, so create it for future use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-2-quic_bqiang@quicinc.com
The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.
Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.
The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake.
Fixes: 3f6d078d4a ("fix compat truncate/ftruncate")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When upgrading to libbpf 1.3 we noticed a big performance hit while
loading programs using CORE on non base-BTF symbols. This was tracked
down to the new BTF sanity check logic. The issue is the base BTF
definitions are checked first for the base BTF and then again for every
module BTF.
Loading 5 dummy programs (using libbpf-rs) that are using CORE on a
non-base BTF symbol on my system:
- Before this fix: 3s.
- With this fix: 0.1s.
Fix this by only checking the types starting at the BTF start id. This
should ensure the base BTF is still checked as expected but only once
(btf->start_id == 1 when creating the base BTF), and then only
additional types are checked for each module BTF.
Fixes: 3903802bb9 ("libbpf: Add basic BTF sanity validation")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240624090908.171231-1-atenart@kernel.org
The VOP on RK3328 needs to run at a higher rate in order to produce a
proper 3840x2160 signal.
Change to use 300MHz for VIO clk and 400MHz for VOP clk, same rates used
by vendor 4.4 kernel.
Fixes: 52e02d377a ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240615170417.3134517-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3588j uses a different set of OPPs for its GPU, both in terms of
allowed frequencies and in terms of voltages.
Move the GPU OPPs table into per-variant .dtsi files to accommodate
for this difference.
The table for RK3588j is adapted from Rockchip downstream sources [1],
while RK3588 one is moved verbatim into the per-variant .dtsi file.
The values provided for RK3588 in the downstream sources match those
in the original commit.
[1] 604cec4004/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
Fixes: 6fca4edb93 ("arm64: dts: rockchip: Add rk3588 GPU node")
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240617-rk-dts-additions-v5-8-c1f5f3267f1e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3588j is the 'industrial' variant of RK3588, and it uses a different
set of OPPs both in terms of allowed frequencies and in terms of
applicable voltages at each frequency setpoint.
Add the OPPs that apply to RK3588j (and apparently RK3588m too) to
enable dynamic CPU frequency scaling.
OPP values are derived from Rockchip downstream sources [1] by taking
only those OPPs which have the highest frequency for a given voltage
level and dropping the rest (if they are included, the kernel complains
at boot time about them being inefficient)
[1] 604cec4004/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240617-rk-dts-additions-v5-7-c1f5f3267f1e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
By default the CPUs on RK3588 start up in a conservative performance
mode. Add frequency and voltage mappings to the device tree to enable
dynamic scaling via cpufreq.
OPP values are adapted from Radxa's downstream kernel for Rock 5B [1],
stripping them down to the minimum frequency and voltage combinations
as expected by the generic upstream cpufreq-dt driver, and also dropping
those OPPs that don't differ in voltage but only in frequency (keeping
the top frequency OPP in each case).
Note that this patch ignores voltage scaling for the CPU memory
interface which the downstream kernel does through a custom cpufreq
driver, and which is why the downstream version has two sets of voltage
values for each OPP (the second one being meant for the memory
interface supply regulator). This is done instead via regulator
coupling between CPU and memory interface supplies on affected boards.
This has been tested on Rock 5B with u-boot 2023.11 compiled from
Collabora's integration tree [2] with binary bl31 and appears to be
stable both under active cooling and passive cooling (with throttling)
[1] https://github.com/radxa/kernel/blob/stable-5.10-rock5/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
[2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/u-boot
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240617-rk-dts-additions-v5-6-c1f5f3267f1e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3588 chips allow for their CPU cores to be powered by a different
supply vs. their corresponding memory interfaces, and two of the
boards currently upstream do that (EVB1 and QuartzPro64).
The voltage of the memory interface though has to match that of the
CPU cores that use it, which downstream kernels achieve by the means
of a custom cpufreq driver which adjusts both at the same time.
It seems that regulator coupling is a more appropriate generic
interface for it, so this patch introduces coupling to affected
device trees to ensure that memory interface voltage is also updated
whenever cpufreq switches between CPU OPPs.
Note that other boards, such as Radxa Rock 5B, define both the CPU
and memory interface regulators as aliases to the same DT node, so
this doesn't apply there.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240617-rk-dts-additions-v5-5-c1f5f3267f1e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
align with other Radxa products.
- mmc0 is eMMC
- mmc1 is microSD
for ZERO 3E, there is no eMMC, but aliases should start at 0, so mmc0
is microSD as exception.
Fixes: 1a5c8d307c ("arm64: dts: rockchip: Add Radxa ZERO 3W/3E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Changes in v3:
- fix syntax error in rk3566-radxa-zero-3e.dts
Changes in v2:
- microSD is mmc0 instead of mmc1 for ZERO 3E
Link: https://lore.kernel.org/r/20240620224435.2752-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PinePhone Pro has a cluster of 3 single RGB GPIO LEDs.
Add the GPIO entries for the 3 red/green/blue LEDs and an
entry for the multi-color group to allow them to be used
as a combined RGB LED.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20240623165326.1273944-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
