Currently, the x1e80100 uses pure V6 register offsets for DP part of the
combo PHY. This hasn't been an issue because external DP is not yet
enabled on any of the boards yet. But in order to enabled it, all these
new V6 N4 register offsets are needed. So add them.
Fixes: 762c3565f3 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'miphy_initval' is unused since the original
commit 2c14e9be0c ("phy: miphy28lp: Provide support for the MiPHY28lp
Generic PHY").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240527205844.165279-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'regval' is unused since the original
commit f8aa660841 ("phy: starfive: Add mipi dphy rx support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240527205937.165325-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SC8180X platform has two UNIPHY blocks, add support for these in the
QMP driver.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-usb-mp-v1-2-60a904392438@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Back in 2021 we already discussed removing deny_write_access() for
executables. Back then I was hesistant because I thought that this might
cause issues in userspace. But even back then I had started taking some
notes on what could potentially depend on this and I didn't come up with
a lot so I've changed my mind and I would like to try this.
Here are some of the notes that I took:
(1) The deny_write_access() mechanism is causing really pointless issues
such as [1]. If a thread in a thread-group opens a file writable,
then writes some stuff, then closing the file descriptor and then
calling execve() they can fail the execve() with ETXTBUSY because
another thread in the thread-group could have concurrently called
fork(). Multi-threaded libraries such as go suffer from this.
(2) There are userspace attacks that rely on overwriting the binary of a
running process. These attacks are _mitigated_ but _not at all
prevented_ from ocurring by the deny_write_access() mechanism.
I'll go over some details. The clearest example of such attacks was
the attack against runC in CVE-2019-5736 (cf. [3]).
An attack could compromise the runC host binary from inside a
_privileged_ runC container. The malicious binary could then be used
to take over the host.
(It is crucial to note that this attack is _not_ possible with
unprivileged containers. IOW, the setup here is already insecure.)
The attack can be made when attaching to a running container or when
starting a container running a specially crafted image. For example,
when runC attaches to a container the attacker can trick it into
executing itself.
This could be done by replacing the target binary inside the
container with a custom binary pointing back at the runC binary
itself. As an example, if the target binary was /bin/bash, this
could be replaced with an executable script specifying the
interpreter path #!/proc/self/exe.
As such when /bin/bash is executed inside the container, instead the
target of /proc/self/exe will be executed. That magic link will
point to the runc binary on the host. The attacker can then proceed
to write to the target of /proc/self/exe to try and overwrite the
runC binary on the host.
However, this will not succeed because of deny_write_access(). Now,
one might think that this would prevent the attack but it doesn't.
To overcome this, the attacker has multiple ways:
* Open a file descriptor to /proc/self/exe using the O_PATH flag and
then proceed to reopen the binary as O_WRONLY through
/proc/self/fd/<nr> and try to write to it in a busy loop from a
separate process. Ultimately it will succeed when the runC binary
exits. After this the runC binary is compromised and can be used
to attack other containers or the host itself.
* Use a malicious shared library annotating a function in there with
the constructor attribute making the malicious function run as an
initializor. The malicious library will then open /proc/self/exe
for creating a new entry under /proc/self/fd/<nr>. It'll then call
exec to a) force runC to exit and b) hand the file descriptor off
to a program that then reopens /proc/self/fd/<nr> for writing
(which is now possible because runC has exited) and overwriting
that binary.
To sum up: the deny_write_access() mechanism doesn't prevent such
attacks in insecure setups. It just makes them minimally harder.
That's all.
The only way back then to prevent this is to create a temporary copy
of the calling binary itself when it starts or attaches to
containers. So what I did back then for LXC (and Aleksa for runC)
was to create an anonymous, in-memory file using the memfd_create()
system call and to copy itself into the temporary in-memory file,
which is then sealed to prevent further modifications. This sealed,
in-memory file copy is then executed instead of the original on-disk
binary.
Any compromising write operations from a privileged container to the
host binary will then write to the temporary in-memory binary and
not to the host binary on-disk, preserving the integrity of the host
binary. Also as the temporary, in-memory binary is sealed, writes to
this will also fail.
The point is that deny_write_access() is uselss to prevent these
attacks.
(3) Denying write access to an inode because it's currently used in an
exec path could easily be done on an LSM level. It might need an
additional hook but that should be about it.
(4) The MAP_DENYWRITE flag for mmap() has been deprecated a long time
ago so while we do protect the main executable the bigger portion of
the things you'd think need protecting such as the shared libraries
aren't. IOW, we let anyone happily overwrite shared libraries.
(5) We removed all remaining uses of VM_DENYWRITE in [2]. That means:
(5.1) We removed the legacy uselib() protection for preventing
overwriting of shared libraries. Nobody cared in 3 years.
(5.2) We allow write access to the elf interpreter after exec
completed treating it on a par with shared libraries.
Yes, someone in userspace could potentially be relying on this. It's not
completely out of the realm of possibility but let's find out if that's
actually the case and not guess.
Link: https://github.com/golang/go/issues/22315 [1]
Link: 49624efa65 ("Merge tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux") [2]
Link: https://unit42.paloaltonetworks.com/breaking-docker-via-runc-explaining-cve-2019-5736 [3]
Link: https://lwn.net/Articles/866493
Link: https://github.com/golang/go/issues/22220
Link: 5bf8c0cf09/src/cmd/go/internal/work/buildid.go (L724)
Link: 5bf8c0cf09/src/cmd/go/internal/work/exec.go (L1493)
Link: 5bf8c0cf09/src/cmd/go/internal/script/cmds.go (L457)
Link: 5bf8c0cf09/src/cmd/go/internal/test/test.go (L1557)
Link: 5bf8c0cf09/src/os/exec/lp_linux_test.go (L61)
Link: https://github.com/buildkite/agent/pull/2736
Link: https://github.com/rust-lang/rust/issues/114554
Link: https://bugs.openjdk.org/browse/JDK-8068370
Link: https://github.com/dotnet/runtime/issues/58964
Link: https://lore.kernel.org/r/20240531-vfs-i_writecount-v1-1-a17bea7ee36b@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add suspend and resume support.
The already_configured flag is cleared during the suspend stage to force
the PHY initialization during the resume stage.
Co-developed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-8-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a missing double quote in the unsafe_copy_dirent_name() macro
comment.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240602004729.229634-2-thorsten.blum@toblux.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit c512c69187 ("uaccess: implement a proper
unsafe_copy_to_user() and switch filldir over to it") the header file is
no longer needed.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240602101534.348159-2-thorsten.blum@toblux.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Even if a PHY is already configured, the PHY operations are needed during
resume stage, as the PHY is in reset state.
The noop_ops PHY operations is removed to always have PHY operations.
The already_configured flag is checked at the begening of init, configure
and poweron operations to keep the already_configured behaviour.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-7-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Resets are needed during suspend and resume stages.
So they shall be registered during the probe even the phy is already
initialized.
The function cdns_torrent_reset is renamed cdns_torrent_of_get_reset() to
make it clear.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-5-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extract calls to clk_get from cdns_torrent_clk into a separate function.
It needs to call cdns_torrent_clk at resume without looking up the clock.
Co-developed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-4-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add resume support.
It has been tested on J7200 SR1.0 and SR2.0.
Co-developed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-3-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The wiz_clock_init() function mixes probe and hardware configuration.
Rename the wiz_clock_init() to wiz_clock_probe() and move the hardware
configuration part in a new function named wiz_clock_init().
This hardware configuration sequence must be called during the resume
stage of the driver.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240412-j7200-phy-s2r-v1-2-f15815833974@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added a module description to sysctl Kunit self test module to fix the
'make W=1' warning (" WARNING: modpost: missing MODULE_DESCRIPTION() in
kernel/sysctl-test.o")
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
In a future commit the proc_handlers themselves will change to
"const struct ctl_table". As a preparation for that adapt the internal
helper.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Currently, hw_link_id is sent in WMI service ready event but it
is not parsed anywhere.
But, in future, for multi-link operation, this parameter would be
needed by many WMI commands such as WMI beacon template
(WMI_BCN_TMPL_CMDID), WMI vdev start for Multi-link virtual AP
interfaces (WMI_VDEV_START_REQUEST_CMDID), WMI peer assoc command
(WMI_PEER_ASSOC_CMDID) for Multi-link peer and so on.
Hence, add changes to parse and store the hw_link_id received in
WMI service ready event in ath12k_pdev structure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529054955.4105240-1-quic_hprem@quicinc.com
The sysctl core is preparing to only expose instances of
struct ctl_table as "const".
This will also affect the ctl_table argument of sysctl handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Move boundary checking for proc_dou8ved_minmax into module loading, thereby
reporting errors in advance. And add a kunit test case ensuring the
boundary check is done correctly.
The boundary check in proc_dou8vec_minmax done to the extra elements in
the ctl_table struct is currently performed at runtime. This allows buggy
kernel modules to be loaded normally without any errors only to fail
when used.
This is a buggy example module:
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sysctl.h>
static struct ctl_table_header *_table_header = NULL;
static unsigned char _data = 0;
struct ctl_table table[] = {
{
.procname = "foo",
.data = &_data,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE_THOUSAND,
},
};
static int init_demo(void) {
_table_header = register_sysctl("kernel", table);
if (!_table_header)
return -ENOMEM;
return 0;
}
module_init(init_demo);
MODULE_LICENSE("GPL");
And this is the result:
# insmod test.ko
# cat /proc/sys/kernel/foo
cat: /proc/sys/kernel/foo: Invalid argument
Suggested-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.
Commit 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.
Fixes: 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Currently for ath12k PCI devices, firmware could be running in one of
several execution environments, e.g., PBL, SBL and mission mode etc. Among
which PBL is the only stage where PCIe link negotiation could happen. So
normally firmware runs in PBL in order to be enumerated during system reboot.
However it might not work in kernel crash scenario: ath12k target is not
found after warm reboot from kernel crash. This is because when kernel crashes,
ath12k host does nothing to firmware. And during warm reboot, WLAN power
is sustained. So firmware is likely to keep running in mission mode throughout
the bootup process. As a result PCIe link is not established and thus target
not enumerated.
So add a handler in panic notification list for ath12k. When kernel crashes,
this handler gets called and tries to reset target to PBL state. Then PCIe
link negotiation could happen and target gets enumerated.
This change applies to all PCI devices including WCN7850 and QCN9274.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529021533.10861-1-quic_bqiang@quicinc.com
The in_token->pages[] array is not NULL terminated. This results in
the following KASAN splat:
KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]
Fixes: bafa6b4d95 ("SUNRPC: Fix gss_free_in_token_pages()")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The TQMx86 GPIO controller only supports falling and rising edge
triggers, but not both. Fix this by implementing a software both-edge
mode that toggles the edge type after every interrupt.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
irq_set_type() should not implicitly unmask the IRQ.
All accesses to the interrupt configuration register are moved to a new
helper tqmx86_gpio_irq_config(). We also introduce the new rule that
accessing irq_type must happen while locked, which will become
significant for fixing EDGE_BOTH handling.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The TQMx86 GPIO controller uses the same register address for input and
output data. Reading the register will always return current inputs
rather than the previously set outputs (regardless of the current
direction setting). Therefore, using a RMW pattern does not make sense
when setting output values. Instead, the previously set output register
value needs to be stored as a shadow register.
As there is no reliable way to get the current output values from the
hardware, also initialize all channels to 0, to ensure that stored and
actual output values match. This should usually not have any effect in
practise, as the TQMx86 UEFI sets all outputs to 0 during boot.
Also prepare for extension of the driver to more than 8 GPIOs by using
DECLARE_BITMAP.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/d0555933becd45fa92a85675d26e4d59343ddc01.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ACE3 IP used in PantherLake exposes new bitfields in the ACTMCTL
register to better control clocks/delays. These bitfields were
reserved/zero in the ACE2.x IP, to simplify the integration the new
bifields are added unconditionally. The behavior will only be impacted
when the firmware exposes DSD properties to set non-zero values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603070240.5165-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The notion of stream is by construction based on a multi-bus
capability, to allow for aggregation of Peripheral devices or
functions located on different segments. We currently count how many
master_rt contexts are used by a stream, but we don't have the dual
refcount of how many streams are allocated on a given bus. This
refcount will be useful to check if BTP/BRA streams can be allocated.
Note that the stream_refcount is modified in sdw_master_rt_alloc() and
sdw_master_rt_free() which are both called with the bus_lock mutex
held, so there's no need for refcount_ primitives for additional
protection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603065841.4860-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We have an existing debugfs files to read standard registers
(DP0/SCP/DPn).
This patch provides a more generic interface to ANY set of read/write
contiguous registers in a peripheral device. In follow-up patches,
this interface will be extended to use BRA transfers.
The sequence is to use the following files added under the existing
debugsfs directory for each peripheral device:
command (write 0, read 1)
num_bytes
start_address
firmware_file (only for writes)
read_buffer (only for reads)
Example for a read command - this checks the 6 bytes used for
enumeration.
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 1 > command
echo 6 > num_bytes
echo 0x50 > start_address
echo 1 > go
cat read_buffer
address 0x50 val 0x30
address 0x51 val 0x02
address 0x52 val 0x5d
address 0x53 val 0x07
address 0x54 val 0x11
address 0x55 val 0x01
Example with a 2-byte firmware file written in DP0 address 0x22
od -x /lib/firmware/test_firmware
0000000 0a37
0000002
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 0 > command
echo 2 > num_bytes
echo 0x22 > start_address
echo "test_firmware" > firmware_file
echo 1 > go
cd /sys/kernel/debug/soundwire/master-0-0/sdw\:0\:025d\:0711\:01/
echo 1 > command
echo 2 > num_bytes
echo 0x22 > start_address
echo 1 > go
cat read_buffer
address 0x22 val 0x37
address 0x23 val 0x0a
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603065841.4860-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PAPR hypervisor has introduced three new counters in the VPA area of
LPAR CPUs for KVM L2 guest (see [1] for terminology) observability - two
for context switches from host to guest and vice versa, and one counter
for getting the total time spent inside the KVM guest. Add a tracepoint
that enables reading the counters for use by ftrace/perf. Note that this
tracepoint is only available for nestedv2 API (i.e, KVM on PowerVM).
[1] Terminology:
a. L1 refers to the VM (LPAR) booted on top of PAPR hypervisor
b. L2 refers to the KVM guest booted on top of L1.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520175742.196329-1-gautam@linux.ibm.com
Vladimir Oltean says:
====================
Probing cleanup for the Felix DSA driver
This is a follow-up to Russell King's request for code consolidation
among felix_vsc9959, seville_vsc9953 and ocelot_ext, stated here:
https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Details are in individual patches. Testing was done on NXP LS1028A
(felix_vsc9959).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the common felix_register_switch() from the umbrella driver
is the only entity that accesses these data structures, we can remove
them from the list of the exported symbols.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init code, which could be
made common [1].
[1]: https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Here, we take the following common steps:
- "felix" and "ds" structure allocation
- "felix", "ocelot" and "ds" basic structure initialization
- dsa_register_switch() call
and we make a common function out of them.
For every driver except felix_vsc9959, this is also the entire probing
procedure. For felix_vsc9959, we also need to do some PCI-specific
stuff, which can easily be reordered to be done before, and unwound on
failure.
We also have to convert the bus-specific platform_set_drvdata() and
pci_set_drvdata() calls into dev_set_drvdata(). But this should have no
impact on the behavior.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King points out that seville_vsc9953 populates
felix->info->num_tx_queues = 8, but this doesn't make it all the way
into ds->num_tx_queues (which is how the user interface netdev queues
get allocated) [1].
[1]: https://lore.kernel.org/all/20240415160150.yejcazpjqvn7vhxu@skbuf/
When num_tx_queues=0 for seville, this is implicitly converted to 1 by
dsa_user_create(), and this is good enough for basic operation for a
switch port. The tc qdisc offload layer works with netdev TX queues,
so for QoS offload we need to pretend we have multiple TX queues. The
VSC9953, like ocelot_ext, doesn't export QoS offload, so it doesn't
really matter. But we can definitely set num_tx_queues=8 for all
switches.
The felix->info->num_tx_queues construct itself seems unnecessary.
It was introduced by commit de143c0e27 ("net: dsa: felix: Configure
Time-Aware Scheduler via taprio offload") at a time when vsc9959
(LS1028A) was the only switch supported by the driver.
8 traffic classes, and 1 queue per traffic class, is a common
architectural feature of all switches in the family. So they could
all just set OCELOT_NUM_TC and be fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current placement of devm_request_threaded_irq() is inconvenient.
It is between the allocation of the "felix" structure and
dsa_register_switch(), both of which we'd like to refactor into a
function that's common for all switches. But the IRQ is specific to
felix_vsc9959.
A closer inspection of the felix_irq_handler() code suggests that
it does things that depend on the data structures having been fully
initialized. For example, ocelot_get_txtstamp() takes
&port->tx_skbs.lock, which has only been initialized in
ocelot_init_port() which has not run yet.
It is not one of those IRQF_SHARED IRQs, so CONFIG_DEBUG_SHIRQ_FIXME
shouldn't apply here, and thus, it doesn't really matter, because in
practice, the IRQ will not be triggered so early. Nonetheless, it is a
good practice for the driver to be prepared for it to fire as soon as it
is requested.
Create a new felix->info method for running custom code for vsc9959 from
within felix_setup(), and move the request_irq() call there. The
ocelot_ext should have an IRQ as well, so this should be a step in the
right direction for that model (VSC7512) as well.
Some minor changes are made while moving the code. Casts from void *
aren't necessary, so drop them, and rename felix_irq_handler() to the
more specific vsc9959_irq_handler().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
[1] https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Prepare the ground in the felix_vsc9959 driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 6fffbc7ae1 ("PCI: Honor firmware's device disabled
status"), PCI device drivers with OF bindings no longer need this check.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
[1] https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Prepare the ground in the seville_vsc9953 driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King suggested that felix_vsc9959, seville_vsc9953 and
ocelot_ext have a large portion of duplicated init and teardown code,
which could be made common [1]. The teardown code could even be
simplified away if we made use of devres, something which is used here
and there in the felix driver, just not very consistently.
[1] https://lore.kernel.org/all/Zh1GvcOTXqb7CpQt@shell.armlinux.org.uk/
Prepare the ground in the ocelot_ext driver, by allocating the data
structures using devres and deleting the kfree() calls. This also
deletes the "Failed to allocate ..." message, since memory allocation
errors are extremely loud anyway, and it's hard to miss them.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004935.2400191-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZc9egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoLsH/0xo1TNZwNRE9Qux
gFbJDDhxMtvWnJCSqUuhpypd7SoVVEVKiXW942gWTl97PlCEH0ov3p+0UbxnmG13
kKJT1C/gct95L03OAfGquIjBSWh4/55o6Vz1zYTGvTFpWZo7G3ZvCDY8o9kN5/L3
mnpC+GfzZ9ckg+2TfwlbGBQUtILHV3IipCbfDFPSrT8mS0IT67uvBlND3nI++woj
J1znGqg1PQ6yFnFCfj4RYCiyv/jEAT0ZTyokO4rH+iQVufc3y02mokhMuqmSoE6T
5bbHToLZIaa/QjRamN/+ltwyrhv8WlX4rJOkMibJY6w8gpukt/k6gL2Pguk4y2pf
0FPbbC0=
=0AGs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZdsDsACgkQJNaLcl1U
h9B5bgf+K3H6WnMn+2TsKE7TBRW8D8J1FJdYDcJ5CoM/tw10YqgNHIvrZXvikLQG
Di3jM3SIFTWn2R350PBx+z+05o3vjVKWpH1bi/EPCCfKl80vyOaMFDZYL7jRxBBl
x3dzqsn//U13U2mdVQ0d1plxtCBqzy8v1nDq+9KNog1gjfTLFQ2Aa+++oZkoDqo4
TJgqBAAzmynDawEhZ7WKdAb6Wb/AEyvWGgfudE+N2Qs3NZt2tbnD2KH23e8SF3ZN
J3CiL6JPSuI2fAW8+zlZdmQRf/pEZFXxebnKc7fyDglqmzU4Pw4IIt/xIfuFMDBA
eEPZ+gaeBV2jjPsqXb1gxD3hqCMYeQ==
=qq1C
-----END PGP SIGNATURE-----
spi: Merge up fixes
We need these to get the i.MX8 boards working in CI again.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZc9egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoLsH/0xo1TNZwNRE9Qux
gFbJDDhxMtvWnJCSqUuhpypd7SoVVEVKiXW942gWTl97PlCEH0ov3p+0UbxnmG13
kKJT1C/gct95L03OAfGquIjBSWh4/55o6Vz1zYTGvTFpWZo7G3ZvCDY8o9kN5/L3
mnpC+GfzZ9ckg+2TfwlbGBQUtILHV3IipCbfDFPSrT8mS0IT67uvBlND3nI++woj
J1znGqg1PQ6yFnFCfj4RYCiyv/jEAT0ZTyokO4rH+iQVufc3y02mokhMuqmSoE6T
5bbHToLZIaa/QjRamN/+ltwyrhv8WlX4rJOkMibJY6w8gpukt/k6gL2Pguk4y2pf
0FPbbC0=
=0AGs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZdsCUACgkQJNaLcl1U
h9AUKwf/RYzbaI4T3Ucd47/yhV2J3Ln/Q1dve+Eh/SdVILr0lz0opZyjERp/7F+f
QTSBrSnr3WDj+haeG7kdf89Z6dE+CaNkvvi+g+dKwAPlv+dwRT2Z38/I8336O0So
+oo/EdysCAgMXjC8lV29pju8X9VbIPRSuTakbYpBBQD2jmdKVA4MtUnQRR/odkZ7
GVK+VydDJU1+gkmtuRBO0EA8yM7yorb1P0M3gwPLvsRO3SFLVul8UDGm/zuEJm5M
ArfXUGcPkUKUFpjbOl9mdDhkhPtYFwB3GiItIEASDAcCgibdHZY3F8+dJhesiIio
vdZVQ54G6T/h4i2V5jmNaxtVv0n1xw==
=ChA8
-----END PGP SIGNATURE-----
regmap: Merge up fixes
We need these to get the i.MX8 boards working in CI again.
