The .PHONY targets "all" and "clean" are both already defined in the
file that is included in the very next line:
../lib.mk.
Remove this duplicate code.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:
1. For the disable ctrl path, we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
are called serially.
So the reserved tags may still be enough while reg_xx() use reserved tags.
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Lots of small fixes.
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes
-----BEGIN PGP SIGNATURE-----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=EI0R
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes:
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes"
* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: seq: ump: Fix swapped song position pointer data
ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
ALSA: seq: Fix yet another spot for system message conversion
ALSA: ump: Set default protocol when not given explicitly
ALSA: ump: Don't accept an invalid UMP protocol number
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
ALSA: pcm: fix typo in comment
ALSA: ump: Don't clear bank selection after sending a program change
ALSA: seq: Fix incorrect UMP type for system messages
ALSA/hda: intel-dsp-config: reduce log verbosity
ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
ASoC: SOF: add missing MODULE_DESCRIPTION()
ASoC: SOF: reorder MODULE_ definitions
ASoC: SOF: AMD: group all module related information
...
Highlights:
- A use-after-free bugfix
- 2 Kconfig fixes for randconfig builds
- Allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for 2 new laptop/tablet models
The following is an automated git shortlog grouped by driver:
ISST:
- fix use-after-free in tpmi_sst_dev_remove()
thinkpad_acpi:
- Select INPUT_SPARSEKMAP in Kconfig
touchscreen_dmi:
- Add info for the EZpad 6s Pro
- Add info for GlobalSpace SolT IVW 11.6" tablet
- Add support for setting touchscreen properties from cmdline
x86-android-tablets:
- Add "select LEDS_CLASS"
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZYxTIUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x+sQf/WpB06lMgOnGtRa+3YdG9jC/U/MVG
QXWZH30TexlfNeuJfpgD6lBTRayX92Tpko9S6dxdNVaeyHZ5jfqN9t5JpRuWzoek
8YI5Jj/62J6GEGG6wuSsW12blCoCM6rDb7tQly1kLNpZU01xaPFIShFn9cL15XpO
YZh+QuuqIiO+8FSmKZqfHW9RMf3S4pxc/epTZU8lKei0s1PXdQXRs3vad0HGsIsL
hFLyc/JjdDQ/9O7jhvl9r7zurg0xmlPc2khRkdG7gnrG1YC2AYK2asPonx8UjrRr
ATS2mJghuPyPIqE9wytX5vxZS9C5OZcw2ZW9L6vKTrL4qQKkDHJkhKUgIg==
=nCoi
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- a use-after-free bugfix
- Kconfig fixes for randconfig builds
- allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for two new laptop/tablet models
* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
* A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
* HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot issues
on XIP systems with huge pages.
* An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
* A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
-----BEGIN PGP SIGNATURE-----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=KSav
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this confuses
util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred
-----BEGIN PGP SIGNATURE-----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=HDxx
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c3 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Kernel VM do not have an Xe file. Include a check for Xe file in the VM
before trying to get pid from VM's Xe file when taking a devcoredump.
Fixes: b10d0c5e9d ("drm/xe: Add process name to devcoredump")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530203341.1795181-1-matthew.brost@intel.com
According to kdoc idr is deprecated and xarrays should be used nowadays.
This patch is moving the recover idr implementation to xarray
datastructure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
According to kernel doc idr is deprecated and xarrays should be used
nowadays. This patch is moving the lkb idr implementation to xarrays.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch drops the own written rsb pre allocation mechanism as this is
already done by using kmem caches, we don't need another layer on top of
that to running some pre allocation scheme.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes ls_local_handle from struct dlm_ls as it stores the
ls pointer of the top level structure itesef and this isn't necessary.
There is a lookup functionality to lookup the lockspace in
dlm_find_lockspace_local() but the given input parameter is the pointer
already. This might be more safe to lookup a lockspace but given a wrong
lockspace pointer is a bug in the code and we save the additional lookup
here. The dlm_ls structure can be still hidden by using dlm_lockspace_t
handle pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an parameter which is currently not used by
dlm_midcomms_addr().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a kref_init() that isn't necessary because the rsb is
created for toss list. Under toss list the rsb should not have any
reference counting logic. If in theory the rsb gets to into keep list
then a kref_init() for res_ref will be initiated.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes some leftover related code from dlm_scand that was
dropped in commit b1f2381c1a ("dlm: drop dlm_scand kthread and use
timers").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
When running fstest generic/423 with sfu mount option, it
was being skipped due to inability to create sockets:
generic/423 [not run] cifs does not support mknod/mkfifo
which can also be easily reproduced with their af_unix tool:
./src/af_unix /mnt1/socket-two bind: Operation not permitted
Fix sfu mount option to allow creating and reporting sockets.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is a general driver for LM3509 backlight chip of TI.
LM3509 is High Efficiency Boost for White LEDs and/or OLED Displays with
Dual Current Sinks. This driver supports OLED/White LED select, brightness
control and sub/main control.
The datasheet can be found at http://www.ti.com/product/lm3509.
Signed-off-by: Patrick Gansterer <paroga@paroga.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240526105136.721529-3-paroga@paroga.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add Device Tree bindings for Texas Instruments LM3509 - a
High Efficiency Boost for White LED's and/or OLED Displays
Signed-off-by: Patrick Gansterer <paroga@paroga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240526105136.721529-2-paroga@paroga.com
Signed-off-by: Lee Jones <lee@kernel.org>
Mark a few more folio functions as taking a const folio pointer, which
allows us to remove a few places in slab which cast away the const.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Scan the root node properties (#{size,address}-cells) earlier, so that
the dt_root_addr_cells and dt_root_size_cells variables are initialized
and can be used.
Link: https://lore.kernel.org/all/20180830190523.31474-2-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Describe the new 'plr' (Performance Limit Reasons) directory contents under
the main TPMI debugfs folder.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-7-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for reading fine grained power limit reasons via the PLR
mailbox.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-6-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add new auxiliary driver that exposes the SoC performance limit reasons
via debugfs interface.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-5-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Each TPMI power domain includes a group of CPUs. Several power
management settings in this case applicable to a group of CPUs.
There can be several power domains in a CPU package. So, provide
interfaces for:
- Get power domain id for a Linux CPU
- Get mask of Linux CPUs in a power domain
Hardware Punit uses different CPU numbering, which is not based on
APIC (Advanced Programmable Interrupt Controller) CPU numbering.
The Linux CPU numbering is based on APIC CPU numbering. Some PM features
like Intel Speed Select, the CPU core mask provided by the hardware is
based on the Punit CPU numbering. To use the core mask, this mask
needs to be converted to a Linux CPUs mask. So, provide interfaces for:
- Convert to a Linux CPU number from a Punit CPU number
- Convert to a Punit CPU number from a Linux CPU number
On each CPU online, MSR 0x54 is used to read the mapping and stores in
a per cpu array. Create a hash for faster searching of a Linux CPU number
from a Punit CPU number.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[tero.kristo: minor updates]
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240528073457.497816-1-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add new API to get the debugfs root directory for TPMI. This allows any
TPMI devices to add their own debugfs items under the same directory
structure.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-3-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TPMI ID 0x0C (Perf Limit Reasons) to the list of supported TPMI IDs.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-2-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the TPMI interface is present, use this interface instead of legacy.
On some systems legacy IO device is also present. Using both interfaces
together is confusing and may set the hardware in inconsistent state.
When TPMI interface is present, don't load legacy drivers.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240531083554.1313110-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some SkyLake server variants don't support any SST functionality. No use
of providing any SST related interfaces on them.
All supported SkyLake servers provide mailbox interface via MSR. So check
for the presence of MSR 0xB0 and 0xB1. If not present don't load common
module.
Move defines for MSR_OS_MAILBOX_INTERFACE and MSR_OS_MAILBOX_DATA to
common header file to avoid duplicating them.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240531083554.1313110-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
SST common module is loaded when model specific or TPMI SST driver
registers for services. There are model specific features used in SST
common modules which are checked with a CPU model list. So, this module
is model specific.
There are some use cases where loading the common module independently
only on the supported CPU models helps. The first use case is for
preventing SST TPMI module loading if the model specific features are
not implemented. The second use case for presenting information to
user space when SST is used in OOB (Out of Band) mode.
1.
With TPMI, SST interface is architectural. This means that no need to add
new PCI device IDs for new CPU models. This means that there can be lag
in adding CPU models for the model specific features in the common
module. For example, before adding CPU model to GRANITERAPIDS_D to
hpm_cpu_ids[], SST is still functional for some features and but will
get/set wrong data for features like SST-CP. This is because IOCTL
ISST_IF_GET_PHY_ID, will not give correct mapping for newer CPU models.
So adding explicit model check during load time will prevent such cases.
For unsupported CPU models, common driver will fail to load and hence
dependent modules will not be loaded.
2.
When the SST TPMI features are controlled by some OOB agent (not from OS
interface), even if the CPU model is supported, there will be no user
space interface available for tools as SST TPMI modules will not
be loaded. User space interface is registered when TPMI modules call
isst_if_cdev_register(). Even in this case user space orchestrator
software needs to get power domain information to schedule workload and
get/set turbo ratio limits. This information is exposed by the common
module using IOCTLs ISST_IF_GET_PHY_ID and ISST_IF_MSR_COMMAND
respectively. Since the user space MSR access can be locked, direct MSR
access from the user space is not an option using /dev/cpu/*/msr.
Converge all the existing model checks to one common place and
use driver data to differentiate. On successful model check
call isst_misc_reg().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240531083554.1313110-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Tim Teichmann <teichmanntim@outlook.de>
Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
With all the Intel specific drm files under include/drm/intel, update
the i915, xe, and the shared display entries. Do not discriminate based
on file name pattern, just add the entire directory for all three
entries.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0fdf28307bb3e457d8c67966c09c44cf7ff5783.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f53384118e33123d3c87b94cc8835360237698b.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e19543f2ae978678c2ff814454f07c96ccd02175.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a19cebc0f03588b9627dcaaebe69a9fef28c27f0.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c1626978d2552ef5732dcf9427c903046afb9c1.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also fix comment in intel_pci_config.h (Ilpo)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e344a72e9be596ac2b8b55a26fd674a96f03cdc.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d645970a65cfd13e01fd8195b35bf9483ae9c2f.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461662d528c3f327c81b764b7c883cd4519d8729.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae224504d99cc6428da6dced9dcde2b7953624ef.1717075103.git.jani.nikula@intel.com
