If IORESOURCE_MEM is not provided in Device Tree due to
any error, resource_list_first_type() will return NULL and
pci_parse_request_of_pci_ranges() will just emit a warning.
This will cause a NULL pointer dereference. Fix this bug by adding NULL
return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0f71c60ffd ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/linux-pci/20240505061517.11527-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
After 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Relocate ks_pcie_set_dbi_mode() and ks_pcie_clear_dbi_mode() to avoid
forward declaration in a subsequent patch. No functional change intended.
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-2-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The of_gpio.h legacy API is going to be removed. In preparation for that,
convert the driver to the agnostic API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is no need to hardcode the clock info in the driver as driver can
rely on the devicetree to supply the clocks required for the functioning
of the peripheral.
Thus, remove the static clock info and obtain the platform supplied
clocks. All the clocks supplied are obtained and enabled using the
devm_clk_bulk_get_all_enable() API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240220084046.23786-3-shradha.t@samsung.com
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The function pointer declaration for the cpu_addr_fixup() callback uses
"cpu_addr" as parameter name.
Likewise, the argument that is supplied to the function pointer when the
function is actually called is "cpu_addr".
Rename the dra7xx_pcie_cpu_addr_fixup() function parameter name to match
reality.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240430071054.248008-3-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add missing cache information to the Allwinner A64 SoC dtsi, to allow
the userspace, which includes lscpu(1) that uses the virtual files provided
by the kernel under the /sys/devices/system/cpu directory, to display the
proper A64 cache information.
While there, use a more self-descriptive label for the L2 cache node, which
also makes it more consistent with other SoC dtsi files.
The cache parameters for the A64 dtsi were obtained and partially derived
by hand from the cache size and layout specifications found in the following
datasheets and technical reference manuals:
- Allwinner A64 datasheet, version 1.1
- ARM Cortex-A53 revision r0p3 TRM, version E
For future reference, here's a brief summary of the documentation:
- All caches employ the 64-byte cache line length
- Each Cortex-A53 core has 32 KB of L1 2-way, set-associative instruction
cache and 32 KB of L1 4-way, set-associative data cache
- The entire SoC has 512 KB of unified L2 16-way, set-associative cache
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/6a772756c2c677dbdaaab4a2c71a358d8e4b27e9.1714304058.git.dsimic@manjaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add missing cache information to the Allwinner H6 SoC dtsi, to allow
the userspace, which includes lscpu(1) that uses the virtual files provided
by the kernel under the /sys/devices/system/cpu directory, to display the
proper H6 cache information.
Adding the cache information to the H6 SoC dtsi also makes the following
warning message in the kernel log go away:
cacheinfo: Unable to detect cache hierarchy for CPU 0
The cache parameters for the H6 dtsi were obtained and partially derived
by hand from the cache size and layout specifications found in the following
datasheets and technical reference manuals:
- Allwinner H6 V200 datasheet, version 1.1
- ARM Cortex-A53 revision r0p3 TRM, version E
For future reference, here's a brief summary of the documentation:
- All caches employ the 64-byte cache line length
- Each Cortex-A53 core has 32 KB of L1 2-way, set-associative instruction
cache and 32 KB of L1 4-way, set-associative data cache
- The entire SoC has 512 KB of unified L2 16-way, set-associative cache
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/49abb93000078c692c48c0a65ff677893909361a.1714304071.git.dsimic@manjaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add a DT node for the Allwinner H616 LRADC describing the base address,
interrupt, reset and clock gates.
Signed-off-by: James McGregor <jamcgregor@protonmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240426092924.15489-3-jamcgregor@protonmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The function pointer declaration for the cpu_addr_fixup() callback uses
"cpu_addr" as parameter name.
Likewise, the argument that is supplied to the function pointer when the
function is actually called is "cpu_addr".
Rename the artpec6_pcie_cpu_addr_fixup() parameter name to match
reality.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240430071054.248008-4-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
The Allwinner H616 SoC has an LRADC which is compatible with the
versions in existing SoCs.
Add a compatible string for H616, with the R329 fallback. This is the
same as the D1, so put them into an enum.
Signed-off-by: James McGregor <jamcgregor@protonmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240426092924.15489-2-jamcgregor@protonmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
If IORESOURCE_BUS is not provided in Device Tree it will be fabricated in
of_pci_parse_bus_range(), so NULL pointer dereference should not happen
here.
But that's hard to verify, so check for NULL anyway.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-pci/20240503125705.46055-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB
iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB
iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB
iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB
Solve the double counting by moving old_size check later in
calculate_memsize() so that children_add_size is already accounted for.
After the patch, the bridge window retains its size as expected:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
Fixes: a4ac9fea01 ("PCI : Calculate right add_size")
Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
PCI bridge window logic needs to find out in advance to the actual
allocation if there is an empty space big enough to fit the window.
Export find_resource_space() for the purpose. Also move the struct
resource_constraint into generic header to be able to use the new
interface.
Link: https://lore.kernel.org/r/20240507102523.57320-7-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
allocate_resource() accepts ->alignf() callback to perform custom alignment
beyond constraint->align. If alignf is NULL, simple_align_resource() is
used which only returns avail->start (no change).
Using avail->start directly is natural and can be done with a conditional
in __find_resource_space() instead which avoids unnecessarily using
callback. It makes the code inside __find_resource_space() more obvious and
removes the need for the caller to provide constraint->alignf
unnecessarily.
This is preparation for exporting find_resource_space().
Link: https://lore.kernel.org/r/20240507102523.57320-6-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To make it simpler to declare resource constraint alignf callbacks, add
typedef for it and document it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240507102523.57320-5-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Document find_resource_space() and the struct resource_constraint as they
are going to be exposed outside of resource.c.
Link: https://lore.kernel.org/r/20240507102523.57320-4-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Rename find_resource() to find_resource_space() to better describe what the
function does. This is a preparation for exposing it beyond resource.c,
which is needed by PCI core. Also rename the __ variant to match the names.
Link: https://lore.kernel.org/r/20240507102523.57320-3-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To maintain uniformity across EPF drivers, move DMA initialization to EPC
init callback. This will also allow us to deinit DMA during PERST# assert
in the further commits.
For EPC drivers without PERST#, DMA deinit will only happen during driver
unbind.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-6-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Move the pci_epc_clear_bar() and pci_epf_free_space() code to respective
helper functions. This allows reusing the helpers in future commits.
This also requires moving the pci_epf_test_unbind() definition below
pci_epf_test_bind() to avoid forward declaration of the above helpers.
No functional change.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-5-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
BME which stands for 'Bus Master Enable' is not defined in the PCIe base
spec even though it is commonly referred in many places (vendor docs). To
align with the spec, rename it to its expansion 'Bus Master Enable'.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash removal of irrelevant 'Link is enabled']
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
core_init() callback is used to notify the EPC initialization event to the
EPF drivers. The 'core' prefix was used indicate that the controller IP
core has completed initialization. But it serves no purpose as the EPF
driver will only care about the EPC initialization as a whole and there is
no real benefit to distinguish the IP core part.
Rename the core_init() callback in 'struct pci_epc_event_ops' to epc_init()
to make it more clear.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-2-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Instead of using a local variable to cache the 'msix_capable' flag, use it
directly to simplify the code.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-2-eacd54831444@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.
Also with commit a01e7214be ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:
drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)
Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.
[kwilczynski: commit log]
Fixes: 5e50ee27d4 ("PCI: pci-epf-test: Add support to defer core initialization")
Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
In "struct pci_epf_group", the 'type_group' field is unused.
This was added, but already unused, by commit 70b3740f2c ("PCI: endpoint:
Automatically create a function specific attributes group").
Thus, remove it.
Found with cppcheck, unusedStructMember.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Broadcom BCM5760X NIC may be a multi-function device.
While it does not advertise an ACS capability, peer-to-peer transactions
are not possible between the individual functions. So it is ok to treat
them as fully isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broadcom.com
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Use the apcs-kpss-global compatible for the APCS global mailbox block
found on this SoC.
This also resolves a dt-binding checker warning:
arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dtb: syscon@f9011000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['allwinner,sun8i-a83t-system-controller', 'allwinner,sun8i-h3-system-controller', 'allwinner,sun8i-v3s-system-controller', 'allwinner,sun50i-a64-system-controller', 'amd,pensando-elba-syscon', 'brcm,cru-clkset', 'freecom,fsg-cs2-system-controller', 'fsl,imx93-aonmix-ns-syscfg', 'fsl,imx93-wakeupmix-syscfg', 'hisilicon,dsa-subctrl', 'hisilicon,hi6220-sramctrl', 'hisilicon,pcie-sas-subctrl', 'hisilicon,peri-subctrl', 'hpe,gxp-sysreg', 'intel,lgm-syscon', 'loongson,ls1b-syscon', 'loongson,ls1c-syscon', 'marvell,armada-3700-usb2-host-misc', 'mediatek,mt8135-pctl-a-syscfg', 'mediatek,mt8135-pctl-b-syscfg', 'mediatek,mt8365-syscfg', 'microchip,lan966x-cpu-syscon', 'microchip,sparx5-cpu-syscon', 'mstar,msc313-pmsleep', 'nuvoton,ma35d1-sys', 'nuvoton,wpcm450-shm', 'rockchip,px30-qos', 'rockchip,rk3036-qos', 'rockchip,rk3066-qos', 'rockchip,rk3128-qos', 'rockchip,rk3228-qos', 'rockchip,rk3288-qos', 'rockchip,rk3368-qos', 'rockchip,rk3399-qos', 'rockchip,rk356
8-qos', 'rockchip,rk3588-qos', 'rockchip,rv1126-qos', 'starfive,jh7100-sysmain', 'ti,am62-usb-phy-ctrl', 'ti,am654-dss-oldi-io-ctrl', 'ti,am654-serdes-ctrl', 'ti,j784s4-pcie-ctrl']
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240408-msm8974-apcs-v1-2-90cb7368836e@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Code supporting Intel PCONFIG targets was an early piece of enabling
for MKTME (Multi-Key Total Memory Encryption).
Since MKTME feature enablement did not follow into the kernel, remove
the unused PCONFIG code.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/4ddff30d466785b4adb1400f0518783012835141.1715054189.git.alison.schofield%40intel.com
TME (Total Memory Encryption) and MKTME (Multi-Key Total Memory
Encryption) BIOS detection were introduced together here [1] and
are loosely coupled in the Intel CPU init code.
TME is a hardware only feature and its BIOS status is all that needs
to be shared with the kernel user: enabled or disabled. The TME
algorithm the BIOS is using and whether or not the kernel recognizes
that algorithm is useless to the kernel user.
MKTME is a hardware feature that requires kernel support. MKTME
detection code was added in advance of broader kernel support for
MKTME that never followed. So, rather than continuing to spew
needless and confusing messages about BIOS MKTME status, remove
most of the MKTME pieces from detect_tme_early().
Keep one useful message: alert the user when BIOS enabled MKTME
reduces the available physical address bits. Recovery of the MKTME
consumed bits requires a reboot with MKTME disabled in BIOS.
There is no functional change for the user, only a change in boot
messages. Below is one example when both TME and MKTME are enabled
in BIOS with AES_XTS_256 which is unknown to the detect tme code.
Before:
[] x86/tme: enabled by BIOS
[] x86/tme: Unknown policy is active: 0x2
[] x86/mktme: No known encryption algorithm is supported: 0x4
[] x86/mktme: enabled by BIOS
[] x86/mktme: 127 KeyIDs available
After:
[] x86/tme: enabled by BIOS
[] x86/mktme: BIOS enable: x86_phys_bits reduced by 8
[1]
commit cb06d8e3d0 ("x86/tme: Detect if TME and MKTME is activated by BIOS")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/86dfdf6ced8c9b790f9376bf6c7e22b5608f47c2.1715054189.git.alison.schofield%40intel.com
Follow the updated bindings and use a QCS404-specific compatible for the
HFPLL on this SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-3-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Motorola Moto G4 Play is an msm8916 based smartphone.
Supported features:
- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound;
- Accelerometer.
msm8916 Moto devices share significant portion of the design so the
common parts are separated into a common dtsi.
Signed-off-by: Ruby Iris Juric <ruby@srxl.me>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Split up to common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-2-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Compatibility fix - we no longer have a separate table for which order
gc walks btrees in, and special case the stripes btree directly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/bcachefs/mean_and_variance_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_check_version_downgrade() was setting c->sb.version, which
bch2_sb_set_downgrade() expects to be at the previous version; and it
shouldn't even have been set directly because c->sb.version is updated
by write_super().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
delete_dead_snapshots now runs before the main fsck.c passes which check
for keys for invalid snapshots; thus, it needs those checks as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Consolidate per-key work into delete_dead_snapshots_process_key(), so we
now walk all keys once, not twice.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now track whether a transaction is locked, and verify that we don't
have nodes locked when the transaction isn't locked; reorder relocks to
not pop the new assert.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This function is used for finding the hash seed (which is the same in
all versions of an inode in different snapshots): ff an inode has been
deleted in a child snapshot we need to iterate until we find a live
version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
