Instead of that huge _PICK() let's use PICK_EVEN_2RANGES()
for the SEL_FETCH_PLANE registers. A bit more tedious to have
to define 8 raw register offsets for everything, but perhaps
a bit easier to understand since we use a standard mechanism
now instead of hand rolling the arithmetic.
Also bloat-o-meter says:
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-326 (-326)
Function old new delta
icl_plane_update_arm 510 446 -64
icl_plane_disable_sel_fetch_arm.isra 158 54 -104
icl_plane_update_noarm 1898 1740 -158
Total: Before=2574502, After=2574176, chg -0.01%
v2: s/mtl+/tgl+/ comments to reflect actual reality
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516135622.3498-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Remove this class after all users have been gone.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
'pclk' is only used locally in the probe. Remove it from the
'synquacer_i2c' structure.
Also remove a useless debug message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
amdgpu_connector_edid() copies the EDID from edid_blob_ptr as a side
effect if amdgpu_connector->edid isn't initialized. However, everywhere
that the returned EDID is used, the EDID should have been set
beforehands.
Only the drm EDID code should look at the EDID property, anyway, so stop
using it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1463862965d76e9458551598fd4d287a08d3d264.1715353572.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
radeon_connector_edid() copies the EDID from edid_blob_ptr as a side
effect if radeon_connector->edid isn't initialized. However, everywhere
that the returned EDID is used, the EDID should have been set
beforehands.
Only the drm EDID code should look at the EDID property, anyway, so stop
using it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b2bdec9161ddcbf79c8516aeea508a9903bd0074.1715353572.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer the parsed results for is_hdmi and has_audio in display info over
calling drm_detect_hdmi_monitor() and drm_detect_monitor_audio(),
respectively.
Conveniently, this also removes the need to use edid_blob_ptr.
v2: Reverse a backwards if condition (Ilia)
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa45875200705205ae101c409fc2bba03b631a5e.1715353572.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On stm32mp157 enabling the controller before asserting CS makes the
hardware trigger spurious interrupts in a tight loop and the transfers
fail. Revert the commit that swapped the order of enable and CS. This
reintroduces the problem that swapping was supposed to fix, which
however is less grave.
Reported-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/all/39033ed7-3e57-4339-80b4-fc8919e26aa7@pengutronix.de/
Fixes: 52b62e7a5d ("spi: stm32: enable controller before asserting CS")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240523103326.792907-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The resent update to remove the orig_nents checks revealed
that not all DMA sync backends can cope with the unallocated
SG list, while supplying orig_nents == 0 (the commit 861370f49c
("iommu/dma: force bouncing if the size is not cacheline-aligned"),
for example, makes that happen for the IOMMU case). It means
we have to check if the buffers are DMA mapped before trying
to sync them. Re-introduce that check in a form of calling
->can_dma() in the same way as it's done in the DMA mapping loop
for the SPI transfers.
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/r/8ae675b5-fcf9-4c9b-b06a-4462f70e1322@linaro.org
Closes: https://lore.kernel.org/all/d3679496-2e4e-4a7c-97ed-f193bd53af1d@notapiano
Fixes: 8cc3bad9d9 ("spi: Remove unneded check for orig_nents")
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240522171018.3362521-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to set the DMA mapped flag of the message if it has
no mapped transfers. Moreover, it may give the code a chance to take
the wrong paths, i.e. to exercise DMA related APIs on unmapped data.
Make __spi_map_msg() to bail earlier on the above mentioned cases.
Fixes: 99adef310f ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZPJ10ACgkQJNaLcl1U
h9AN7wf/bR1oUfxqVRkkeWDJrKevWsXNN5LlWXar8D/yBzGp9ZzlliGKdm58O+7j
G0iPkMGT0tD5oSxEXVWoYSRLwq8c+jvW5nNiNXPAITeSzXnW4LwSnfUNs52dAmAN
MnNqzhSJbsXYH8JH5/JEco5seKC5/ijOOqIxcAhwrrdYnpjPkFXtlU4TQvSZeY7w
i7BeEO1NmvYrgxT1oT+Nm8PFYANsyf9hCgANuZQv5p9iHvjsPzIC2LuW0exy7oiC
k6X8uWiy+ETK3a9p288QZfO9AFrYm9KX3L18ha/C21ljw7DMv5xbgWm5xWnJQGsV
n59T+C5kM0V5luSjXZxQ2/hE1Ueu1Q==
=lhUd
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
Fix a use-after-free on dentry's d_fsdata fid list when a thread
looks up a fid through dentry while another thread unlinks it:
UAF thread:
refcount_t: addition on 0; use-after-free.
p9_fid_get linux/./include/net/9p/client.h:262
v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129
v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181
v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314
v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400
vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248
Freed by:
p9_fid_destroy (inlined)
p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456
p9_fid_put linux/./include/net/9p/client.h:278
v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55
v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518
vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335
The problem is that d_fsdata was not accessed under d_lock, because
d_release() normally is only called once the dentry is otherwise no
longer accessible but since we also call it explicitly in v9fs_remove
that lock is required:
move the hlist out of the dentry under lock then unref its fids once
they are no longer accessible.
Fixes: 154372e67d ("fs/9p: fix create-unlink-getattr idiom")
Cc: stable@vger.kernel.org
Reported-by: Meysam Firouzi
Reported-by: Amirmohammad Eftekhar
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20240521122947.1080227-1-asmadeus@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Jacob Keller says:
====================
intel: Interpret .set_channels() input differently
The ice and idpf drivers can trigger a crash with AF_XDP due to incorrect
interpretation of the asymmetric Tx and Rx parameters in their
.set_channels() implementations:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. the driver interprets `rx 15 tx 15` as 15 combined channels and deletes
the queue that AF_XDP is attached to.
This is fundamentally a problem with interpreting a request for asymmetric
queues as symmetric combined queues.
Fix the ice and idpf drivers to stop interpreting such requests as a
request for combined queues. Due to current driver design for both ice and
idpf, it is not possible to support requests of the same count of Tx and Rx
queues with independent interrupts, (i.e. ethtool -L <IFNAME> rx 15 tx 15)
so such requests are now rejected.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://lore.kernel.org/r/20240521-iwl-net-2024-05-14-set-channels-fixes-v2-0-7aa39e2e99f1@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 87324e747f ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the late XenStore init protocol is only triggered properly
for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the
case that XenStore interface is allocated but not ready (the connection
status is not XENSTORE_CONNECTED), Linux should also wait until the
XenStore is set up properly.
Introduce a macro to describe the XenStore interface is ready, use
it in xenbus_probe_initcall() to select the code path of doing the
late XenStore init protocol or not. Since now we have more than one
condition for XenStore late init, rework the check in xenbus_probe()
for the free_irq().
Take the opportunity to enhance the check of the allocated XenStore
interface can be properly mapped, and return error early if the
memremap() fails.
Fixes: 5b3353949e ("xen: add support for initializing xenstore later as HVM domain")
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20240517011516.1451087-1-xin.wang2@amd.com
Signed-off-by: Juergen Gross <jgross@suse.com>
When nci_rx_work() receives a zero-length payload packet, it should not
discard the packet and exit the loop. Instead, it should continue
processing subsequent packets.
Fixes: d24b03535e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently, we had some servers upgraded to the latest kernel and noticed
the indicator from the user side showed worse results than before. It is
caused by the limitation of tp->rcv_wnd.
In 2018 commit a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin
to around 64KB") limited the initial value of tp->rcv_wnd to 65535, most
CDN teams would not benefit from this change because they cannot have a
large window to receive a big packet, which will be slowed down especially
in long RTT. Small rcv_wnd means slow transfer speed, to some extent. It's
the side effect for the latency/time-sensitive users.
To avoid future confusion, current change doesn't affect the initial
receive window on the wire in a SYN or SYN+ACK packet which are set within
65535 bytes according to RFC 7323 also due to the limit in
__tcp_transmit_skb():
th->window = htons(min(tp->rcv_wnd, 65535U));
In one word, __tcp_transmit_skb() already ensures that constraint is
respected, no matter how large tp->rcv_wnd is. The change doesn't violate
RFC.
Let me provide one example if with or without the patch:
Before:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=65536 ---> server
Note: for the last ACK, the calculation is 512 << 7.
After:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=175232 ---> server
Note: I use the following command to make it work:
ip route change default via [ip] dev eth0 metric 100 initrwnd 120
For the last ACK, the calculation is 1369 << 7.
When we apply such a patch, having a large rcv_wnd if the user tweak this
knob can help transfer data more rapidly and save some rtts.
Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240521134220.12510-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Fixes: 128d5874c0 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tls_init(), a write memory barrier is missing, and store-store
reordering may cause NULL dereference in tls_{setsockopt,getsockopt}.
CPU0 CPU1
----- -----
// In tls_init()
// In tls_ctx_create()
ctx = kzalloc()
ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1)
// In update_sk_prot()
WRITE_ONCE(sk->sk_prot, tls_prots) -(2)
// In sock_common_setsockopt()
READ_ONCE(sk->sk_prot)->setsockopt()
// In tls_{setsockopt,getsockopt}()
ctx->sk_proto->setsockopt() -(3)
In the above scenario, when (1) and (2) are reordered, (3) can observe
the NULL value of ctx->sk_proto, causing NULL dereference.
To fix it, we rely on rcu_assign_pointer() which implies the release
barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is
initialized, we can ensure that ctx->sk_proto are visible when
changing sk->sk_prot.
Fixes: d5bee7374b ("net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCE")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZU4OJG56g2V9z_H7@dragonet/T/
Link: https://lore.kernel.org/r/Zkx4vjSFp0mfpjQ2@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In MLO, the deflink BSSID is clearly invalid. Since we fill
the addresses as MLD addresses and translate later, use the
AP address here instead.
This fixes an issue that happens with HW restart, where the
DelBA frame is transmitted, but not processed correctly due
to the wrong BSSID (or even just discarded entirely). As a
result, the BA sessions are kept alive; however, as other
state is reset during HW restart, this then fails (reorder,
etc.) and data doesn't go through until new BA sessions are
established.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510112601.f4e1effdea29.I98e81f22166b68d4b6211191bcaaf8531b324a77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The negotiated TTLM data must be reset on disconnect, otherwise
it may end up getting reused on another connection. Fix that.
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211858.04142e8fe01c.Ia144457e086ebd8ddcfa31bdf5ff210b4b351c22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This work shouldn't run after we're disconnecting. Cancel it earlier
(and then don't cancel it in stop later.)
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211034.ac754794279f.Ib9fbb1dab50c6b67f6de9be09a6c452ce89bbd50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels'
of 'struct cfg80211_sched_scan_request', 'channels' of 'struct
cfg80211_wowlan_nd_match', and 'matches' of 'struct
cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly
tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized
to pass EHT MU-MIMO configurations from user space to driver
in AP mode.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are now three places setting up chanreq.ap which always
depends on the mode (EHT being used or not) and override flag.
Refactor that code into a common function with a comment, to
make that clearer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.5cd6a209e58a.I3be318959d9e2df5dccd2d0938c3d2fcc6688030@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During channel switch, track the AP configuration in the
chanreq, so that wider bandwidth OFDMA is taken into
account correctly, since multiple channel contexts may
be needed due to sharing not being possible due to
wider bandwidth OFDMA.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.b2c5a72dac1b.I69f65cb2e75d4a49a174b1aede68bf8ff0a3cab3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Collect the CSA data in ieee80211_link_data_managed and
ieee80211_link_data into a csa sub-struct to clean up a
bit and make adding new things more obvious.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we see a channel switch announcement on one link for
another, handle that case and start the CSA. The driver
can react to this in whatever way it needs. The stack
will have the ability to track it via the RNR/MLE in the
reporting link's beacon if it sees it for inactive links
and adjust everything accordingly.
Note that currently the timings for the CSA aren't set,
the values are only used by the Intel drivers, and they
don't need this for newer devices that support MLO, so
I've left it out for now.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.4d34b6a31be7.Ie8453979f5805873a8411c99346bcc3810cd6476@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like it's not currently possible to start radar
detection while already operating, it shouldn't be
possible to start operating while radar detection is
running. Fix that.
Also, improve the check whether operating (carrier
might not be up if e.g. attempting to join IBSS).
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At some point we thought perhaps this could be per link, but
really that didn't happen, and it's confusing. Radar detection
still uses the deflink to allocate the channel, but the work
need not be there. Move it back.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211311.43bd82c6da04.Ib39bec3aa198d137385f081e7e1910dcbde3aa1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
Fixes: 278d240478 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for enable/disable 11be for china and South Korea by
reading DSM function 12 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.037613d03c87.I4e5ee63c0dbdd4bd6c48daee7b0c88462b702423@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a
link selection is scheduled with a delay of 30 seconds.
If during that 30 seconds EMLSR was blocked and unblocked
(IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from
the MLO scan and select link accordingly, and not return immediately to
EMLSR.
Fixes: 2f33561ea8 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.caab27a8dd8f.I63f67e213d5e05416f71513a8d914917d59aa44f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to calculate again whether data should
be included or be handled externally, just check if any
space for it was already reserved.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a3d3b4796460.I85bd3029baee24ebf0be04db7d6bf01834090869@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to allocate buf1 if we're not going to
write anything to it, and the condition for writing is
(correctly) "hdr_len > 0 && !iwl_trace_data()". Also
allocate the event space only under the same condition.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a11e6490d053.Ie090beea70d2f271bb22c9b0e287dbd342fb2a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we crash the firmware, we need to know why we decided to do so.
Almost all the callsites of iwl_force_nmi() print something in the logs
that explain why the driver decided to crash the firmware.
Debugfs doesn't print anything and it is then hard to understand why the
firmware has crashed.
Add a simple print in the debugfs hook to ease the debug.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512075822.e2558de222dc.Idd81777c47264e6f557b086625895c1dc2f667f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When AUTO_EML is set to false, this change ignores the exit criteria,
for testing purposes. Currently, if AUTO_EML is disabled, the
driver will not select a link or enter EMLSR, but will still exit if one
of the criteria is not fulfilled.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512072733.10a0b5da6ec2.I46fd578a3ef6cdbf14fdc4dfa97b4be008fe68e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
