The pointer to fw_packet structure is passed to ring buffer of tracepoints
framework as the value of u64 type. '0x%016llx' is used for the print
format of value, while the flag and width are useless in the case.
This commit removes them.
Link: https://lore.kernel.org/r/20240506082154.396077-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In 'lvts_should_update_thresh()' and 'lvts_ctrl_start()' functions,
the parameter passed to 'lvts_for_each_valid_sensor()' macro is always
'lvts_ctrl->lvts_data->lvts_ctrl'. In other words, the array index 0
is systematically passed as 'struct lvts_ctrl_data' type item, even
when another item should be consumed instead.
Hence, the 'valid_sensor_mask' value which is selected can be wrong
because unrelated to the 'struct lvts_ctrl_data' type item that should
be used. Hence, some thermal zone can be registered for a sensor 'i'
that does not actually exist. Because of the invalid address used
as 'lvts_sensor[i].msr', this situation ends up with a crash in
'lvts_get_temp()' function, where this 'msr' pointer is passed to
'readl_poll_timeout()' function. The following message is output:
"Unable to handle kernel NULL pointer dereference at virtual
address <msr>", with <msr> = 0.
This patch fixes the issue.
Fixes: 11e6f4c314 ("thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-2-f605c50ca117@baylibre.com
In struct lvts_ctrl_data, num_lvts_sensor and cal_offset[] are not used.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-1-f605c50ca117@baylibre.com
Commit 8e01797331 ("iommu/amd: Enable Guest Translation before
registering devices") moved IOMMU Guest Translation (GT) enablement to
early init path. It does feature check based on Global EFR value (got from
ACPI IVRS table). Later it adjusts EFR value based on IOMMU feature
register (late_iommu_features_init()).
It seems in some systems BIOS doesn't set gloabl EFR value properly.
This is causing mismatch. Hence move IOMMU GT enablement after
late_iommu_features_init() so that it does check based on IOMMU EFR
value.
Fixes: 8e01797331 ("iommu/amd: Enable Guest Translation before registering devices")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/linux-iommu/333e6eb6-361c-4afb-8107-2573324bf689@gmail.com/
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Link: https://lore.kernel.org/r/20240506082039.7575-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A kernel command called igfx_off was introduced in commit <ba39592764>
("Intel IOMMU: Intel IOMMU driver"). This command allows the user to
disable the IOMMU dedicated to SOC-integrated graphic devices.
Commit <9452618e74> ("iommu/intel: disable DMAR for g4x integrated gfx")
used this mechanism to disable the graphic-dedicated IOMMU for some
problematic devices. Later, more problematic graphic devices were added
to the list by commit <1f76249cc3> ("iommu/vt-d: Declare Broadwell igfx
dmar support snafu").
On the other hand, commit <19943b0e30> ("intel-iommu: Unify hardware
and software passthrough support") uses the identity domain for graphic
devices if CONFIG_DMAR_BROKEN_GFX_WA is selected.
+ if (iommu_pass_through)
+ iommu_identity_mapping = 1;
+#ifdef CONFIG_DMAR_BROKEN_GFX_WA
+ else
+ iommu_identity_mapping = 2;
+#endif
...
static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
{
+ if (iommu_identity_mapping == 2)
+ return IS_GFX_DEVICE(pdev);
...
In the following driver evolution, CONFIG_DMAR_BROKEN_GFX_WA and
quirk_iommu_igfx() are mixed together, causing confusion in the driver's
device_def_domain_type callback. On one hand, dmar_map_gfx is used to turn
off the graphic-dedicated IOMMU as a workaround for some buggy hardware;
on the other hand, for those graphic devices, IDENTITY mapping is required
for the IOMMU core.
Commit <4b8d18c0c9> "iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA" has
removed the CONFIG_DMAR_BROKEN_GFX_WA option, so the IDENTITY_DOMAIN
requirement for graphic devices is no longer needed. Therefore, this
requirement can be removed from device_def_domain_type() and igfx_off can
be made independent.
Fixes: 4b8d18c0c9 ("iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240428032020.214616-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Major changes are listed as below
rtl8xxxu:
- remove rtl8xxxu_ prefix from filename
- cleanup includes of header files
rtlwifi:
- adjust code to share with coming support of rtl8192du
rtw89:
- complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
- use BIOS ACPI settings to set TX power and channels
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuyEnvMdOsBl1WjpdjlvZYmhshd8FAmY2Jk8ACgkQjlvZYmhs
hd/I9Q//aatzdSDkVtVC9YUFLAb+UYXc0s8t7Kq4eYEu/ZgFRgWHcB1Ka8OBE/9p
mkCiLPBujzqI5nLq+9HoJ0ptzI9F93QnPrsLr670NpY5Nt7IRO5ph90/HN/e2VPm
+FlF+EZ5UuHolw+KaA3Kym3a6Ui7vnmIZympRkk9vKrq4GAXmcVI4zVNAFgRfHo1
tWBdGONlMJGjjIQ2UJ8CiTRMkM7Ph3VgK/aCJyHwtAJvVxSJFN9b1cDzW64DES5V
cPQgVtRg3o/l05KJ+xrggXQWSkiYrtbBMX6URTkOaX6cfVDd6D8qsLLB/CabXGjo
12LqxAxMQuQ44kxXyFSln5SgNwMA0X301Qbzms5KCfKDd9SMZ0MKmOrAlEI35Og5
T03DUg2btD6VSFZJcnNCmBZtSdlm7fhRlxmJTo/N++6lS8CmA0NettkwcOPpfi1l
KdaU735KUG3lgelW9gj4RWUI06cVZ2y4UPAh3fvMq7FuwGDyJvFftrgwn/bN2jPH
9Zmivq1Q2/7xwZ/hhzAwLNUAUv6191XZXAwMxBGT/qpNNrgwMiLnVEjMa1/pgixH
Z5cMlg5c14wpaepB70PCvy2CImOBcGAs8kfvX8cER5L29+lmg5vpdz+DGTCKK8t3
2tdMTA9xtDc+J1EIqgydSXvMfDwdyX9wBr+3sqOVdzfFqeSEx9I=
=z69x
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-05-04-v2' of https://github.com/pkshih/rtw
rtw-next patches for v6.10
Major changes are listed as below
rtl8xxxu:
- remove rtl8xxxu_ prefix from filename
- cleanup includes of header files
rtlwifi:
- adjust code to share with coming support of rtl8192du
rtw89:
- complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
- use BIOS ACPI settings to set TX power and channels
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PSR2_SU_STATUS register macro.
v2: Expand from _PSR2_SU_STATUS to PSR2_SU_STATUS (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502103925.1829104-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There is an issue with ACPI overlay table removal specifically related
to I2C multiplexers.
Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an
existing I2C bus. When this table is loaded we see the creation of a
device for the overall PCA9548 chip and 8 further devices - one
i2c_adapter each for the mux channels. These are all bound to their
ACPI equivalents via an eventual invocation of acpi_bind_one().
When we unload the SSDT overlay we run into the problem. The ACPI
devices are deleted as normal via acpi_device_del_work_fn() and the
acpi_device_del_list.
However, the following warning and stack trace is output as the
deletion does not go smoothly:
------------[ cut here ]------------
kernfs: can not remove 'physical_node', no directory
WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1
Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0
Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000
RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780
RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff
R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50
R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8
FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0
Call Trace:
<TASK>
? kernfs_remove_by_name_ns+0xb9/0xc0
? __warn+0x7c/0x130
? kernfs_remove_by_name_ns+0xb9/0xc0
? report_bug+0x171/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? kernfs_remove_by_name_ns+0xb9/0xc0
? kernfs_remove_by_name_ns+0xb9/0xc0
acpi_unbind_one+0x108/0x180
device_del+0x18b/0x490
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_del_adapter.part.0+0x1bf/0x250
i2c_mux_del_adapters+0xa1/0xe0
i2c_device_remove+0x1e/0x80
device_release_driver_internal+0x19a/0x200
bus_remove_device+0xbf/0x100
device_del+0x157/0x490
? __pfx_device_match_fwnode+0x10/0x10
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_acpi_notify+0x10f/0x140
notifier_call_chain+0x58/0xd0
blocking_notifier_call_chain+0x3a/0x60
acpi_device_del_work_fn+0x85/0x1d0
process_one_work+0x134/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
...
repeated 7 more times, 1 for each channel of the mux
...
The issue is that the binding of the ACPI devices to their peer I2C
adapters is not correctly cleaned up. Digging deeper into the issue we
see that the deletion order is such that the ACPI devices matching the
mux channel i2c adapters are deleted first during the SSDT overlay
removal. For each of the channels we see a call to i2c_acpi_notify()
with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not
actually i2c_clients, nothing is done for them.
Later on, after each of the mux channels has been dealt with, we come
to delete the i2c_client representing the PCA9548 device. This is the
call stack we see above, whereby the kernel cleans up the i2c_client
including destruction of the mux and its channel adapters. At this
point we do attempt to unbind from the ACPI peers but those peers no
longer exist and so we hit the kernfs errors.
The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But,
given that the life cycle of the adapters is linked to the i2c_client,
instead of deleting the i2c_adapters during the i2c_acpi_notify(), we
just trigger unbinding of the ACPI device from the adapter device, and
allow the clean up of the adapter to continue in the way it always has.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 525e6fabea ("i2c / ACPI: add support for ACPI reconfigure notifications")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmY0qykQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1ylZD/9Y+qotJz/GkLvFomo9sYmGbzuQowJRnYr7
Twti8xeu8GUP1zye9QM4hLeBjKzdYUxCDAVHTwtDLQuzirgPQ93+DvmxJ1H8f4yT
isZQhGAbhDnNb14ML/QDOGZueaZsK8Y08fuDCdLW8pWPrg6CsB4UhvoKRD5TgExq
th8Slyo/aCaf8dVN3xgA1xu4A6yhosG/kCJIA1c2T5iyXJB6UZNBJGcB376vwRms
yw/jqjQ/FOdWeuA/wDqXOZOlGuaoETJpFzS/+5tCKjE25IF2/PCR9lQeqSI1tglz
pHIJ69eny+sEAlFcAgzhyr1wvRGnPthW1BqGcNpe1cJl07CnQj5K/SKyHBpp1nGu
JV/RHCUrqWyzIyk0WNBx65eYpxr+9UldJ9PIU8N1vtPj59UUr4gP6hrYRiPAbvfT
i/ObSYvczkRW4/DykPI3L8k87Wo/Lk7IJoR8siCQ5aPqpIo+9G/f5Hq+1CUSfAt8
i5kNX3qNAMYVrsVfOAe9cWPNlpoO6caOqoE8zJgsRVbKR+1OlH3KOXPL6xf3CfJR
oNYv4mxHzjdvI44cpPk5qp6QXi0GP3XfvcaYoguX32vrmn+/vjKyDTq7udDZXHDz
ZWj/CrfnCOB9itM4wF848zwnH1kHF7/UP2/0M7WU0Wt35w5ZKK7bIGIEMZ2aSiMH
ygycIEWs5Q==
=wjQ1
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.10
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN.
So in case it was configured as GPIO_OUT before the configured output
level also get lost. As long as GPIO sysfs was used this wasn't
actually a problem because the pins and their possible output level
were kept by sysfs.
Since more and more Raspberry Pi users start using libgpiod they are
confused about this behavior. So make the pin freeing behavior of
GPIO_OUT configurable via module parameter. In case
pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is
kept.
This patch based on the downstream work of Phil Elwell.
Link: https://github.com/raspberrypi/linux/pull/6117
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20240503062745.11298-1-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The core function expects hardware drivers to call
fw_core_handle_bus_reset() when changing bus topology. The 1394 OHCI
driver calls it when handling selfID event as a result of any bus-reset.
This commit adds a tracepoints event for it.
Link: https://lore.kernel.org/r/20240501073238.72769-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This reverts commit 6732491243045f5a7e1995b4be5f3c964b579ebd.
The former commit adds some alternative tracepoints events to replace the
reverted kernel log messages.
Link: https://lore.kernel.org/r/20240501073238.72769-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At a commit 673249124304 ("firewire: core: option to log bus reset
initiation"), some kernel log messages were added to trace initiation of
bus reset. The kernel log messages are really helpful, while nowadays it
is not preferable just for debugging purpose. For the purpose, Linux
kernel tracepoints is more preferable.
This commit adds some alternative tracepoints events.
Link: https://lore.kernel.org/r/20240501073238.72769-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The OHCI_PARAM_DEBUG_BUSRESETS bit of debug module parameter was added at
a commit a007bb857e ("firewire: fw-ohci: conditionally log busReset
interrupts").
At the former commit, the bit becomes less meaningful, just to skip
logging.
This commit obsoletes it.
Link: https://lore.kernel.org/r/20240501073238.72769-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the former commits, the spurious interrupt events are suppressed as
possible, by unset bus-reset event from the set of handled irq. The change
was written with the less-intrusive style, thus it firstly works at the
second time to handle the event. But it is slightly inconvenient.
This commit adds the event for the initial set of irq to handle. As a
result, the event can be handled even if it is the first time. The change
has a benefit that the OHCI_PARAM_DEBUG_BUSRESETS bit in debug module
parameter is always effective.
Tested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20240501073238.72769-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At the former commit, a pair of tracepoints events is added to trace
asynchronous outbound phy packet. This commit adds a tracepoints event
to trace inbound phy packet. It includes transaction status as well as
the content of phy packet.
This is an example for Remote Reply Packet as a response to Remote Access
Packet sent by lsfirewirephy command in linux-firewire-utils:
async_phy_inbound: \
packet=0xffff955fc02b4e10 generation=1 status=1 timestamp=0x0619 \
first_quadlet=0x001c8208 second_quadlet=0xffe37df7
Link: https://lore.kernel.org/r/20240430001404.734657-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In IEEE 1394 bus, the type of asynchronous packet without any offset to
node address space is called as phy packet. The destination of packet is
IEEE 1394 phy itself. This type of packet is used for several purposes,
mainly for selfID at the state of bus reset, to force selection of root
node, and to adjust gap count.
This commit adds tracepoints events for the type of asynchronous outbound
packet. Like asynchronous outbound transaction packets, a pair of events
are added to trace initiation and completion of transmission.
In the case that the phy packet is sent by kernel API, the match between
the initiation and completion is not so easy, since the data of
'struct fw_packet' is allocated statically. In the case that it is sent by
userspace applications via cdev, the match is easy, since the data is
allocated per each.
This example is for Remote Access Packet by lsfirewirephy command in
linux-firewire-utils:
async_phy_outbound_initiate: \
packet=0xffff89fb34e42e78 generation=1 first_quadlet=0x00148200 \
second_quadlet=0xffeb7dff
async_phy_outbound_complete: \
packet=0xffff89fb34e42e78 generation=1 status=1 timestamp=0x0619
Link: https://lore.kernel.org/r/20240430001404.734657-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In a view of core transaction service, the asynchronous outbound response
consists of two stages; initiation and completion.
This commit adds a pair of events for the asynchronous outbound response.
The following example is for asynchronous write quadlet request as IEC
61883-1 FCP response to node 0xffc1.
async_response_outbound_initiate: \
transaction=0xffff89fa08cf16c0 generation=4 scode=2 dst_id=0xffc1 \
tlabel=25 tcode=2 src_id=0xffc0 rcode=0 \
header={0xffc16420,0xffc00000,0x0,0x0} data={}
async_response_outbound_complete: \
transaction=0xffff89fa08cf16c0 generation=4 scode=2 status=1 \
timestamp=0x0000
Link: https://lore.kernel.org/r/20240429043218.609398-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds an event for asynchronous inbound request.
The following example is for asynchronous block write request as IEC
61883-1 FCP request from node 0xffc1.
async_request_inbound: \
transaction=0xffff89fa08cf16c0 generation=4 scode=2 status=2 \
timestamp=0x00b3 dst_id=0xffc0 tlabel=19 tcode=1 src_id=0xffc1 \
offset=0xfffff0000d00 header={0xffc04d10,0xffc1ffff,0xf0000d00,0x80000} \
data={0x19ff08,0xffff0090}
Link: https://lore.kernel.org/r/20240429043218.609398-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the transaction of IEEE 1394, the node to receive the asynchronous
request transfers any response packet to the requester except for the
unified transaction.
This commit adds an event for the inbound packet. Note that the code to
decode the packet header is moved, against the note about the sanity
check.
The following example is for asynchronous lock response with
compare_and_swap code.
async_response_inbound: \
transaction=0xffff955fc6a07a10 generation=5 scode=2 status=1 \
timestamp=0x0089 dst_id=0xffc1 tlabel=54 tcode=11 src_id=0xffc0 \
rcode=0 header={0xffc1d9b0,0xffc00000,0x0,0x40002} data={0x50800080}
Link: https://lore.kernel.org/r/20240429043218.609398-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In a view of core transaction service, the asynchronous outbound request
consists of two stages; initiation and completion. This commit adds a pair
of event for them.
The following example is for asynchronous lock request with compare_swap
code to offset 0x'ffff'f000'0904 in node 0xffc0.
async_request_outbound_initiate: \
transaction=0xffff955fc6a07a10 generation=5 scode=2 dst_id=0xffc0 \
tlabel=54 tcode=9 src_id=0xffc1 offset=0xfffff0000904 \
header={0xffc0d990,0xffc1ffff,0xf0000904,0x80002}
data={0x80,0x940181}
async_request_outbound_complete: \
transaction=0xffff955fc6a07a10 generation=5 scode=2 status=2 \
timestamp=0xd887
Link: https://lore.kernel.org/r/20240429043218.609398-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The Linux Kernel Tracepoints framework is enough useful to trace
packet data inbound to and outbound from core.
This commit adds firewire subsystem to use the framework.
Link: https://lore.kernel.org/r/20240429043218.609398-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The packet for Asynchronous Streaming Packet includes the same header
fields as the isochronous packet has. It is helpful to have some helper
functions to serialize/deserialize them.
This commit adds such helper functions with their test.
Link: https://lore.kernel.org/r/20240428071347.409202-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the helper function for logging in 1394 ohci driver includes the
hard-coded variables for transaction code. They can be replaced with
the enumerations in UAPI header.
Link: https://lore.kernel.org/r/20240428071347.409202-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In both core and 1394 OHCI driver, some hard-coded values and macros are
used to serialize/deserialize the header of asynchronous packets. It is
inconvenient to reuse them.
This commit adds some helper inline functions with their tests for the
purpose.
Link: https://lore.kernel.org/r/20240428071347.409202-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
