This defines the current OpenRISC relocation types using the current
R_OR1K_* naming conventions.
The old R_OR32_* definitions are left for backwards compatibility.
Note, the R_OR32_VTENTRY and R_OR32_VTINHERIT macros were defined with
the wrong values the have always been 7 and 8 respectively, not 8 and 7.
They are not used for module loading and I have updated them to use the
correct values.
Signed-off-by: Stafford Horne <shorne@gmail.com>
After commit 14c5678720 ("power: reset: syscon-poweroff: Use
devm_register_sys_off_handler(POWER_OFF)") setting up of pm_power_off
was removed from the driver, this causes OpenRISC platforms using
syscon-poweroff to no longer shutdown.
The kernel now supports chained power-off handlers. Use
do_kernel_power_off() that invokes chained power-off handlers. All
architectures have moved away from using pm_power_off except OpenRISC.
This patch migrates openrisc to use do_kernel_power_off() instead of the
legacy pm_power_off().
Fixes: 14c5678720 ("power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v7
* Use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-10-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v7:
* use drm_panic_gem_get_scanout_buffer() helper
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-9-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v5:
* Also check that the plane is visible and primary. (Thomas Zimmermann)
v7:
* use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-8-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v8:
* Replace get_scanout_buffer() with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-7-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was initialy done for imx6, but should work on most drivers
using drm_fb_dma_helper.
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* go back to get_scanout_buffer()
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
* Remove the #ifdef CONFIG_DRM_PANIC, and build it unconditionnaly, as
it's a small function. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-6-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a debugfs file, so you can test drm_panic without freezing
your machine. This is unsafe, and should be enabled only for
developer or tester.
To display the drm_panic screen on the device 0:
echo 1 > /sys/kernel/debug/dri/0/drm_panic_plane_0
v9:
* Create a debugfs file for each plane in the device's debugfs
directory. This allows to test for each plane of each GPU
independently.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-5-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the following formats:
DRM_FORMAT_RGB565
DRM_FORMAT_RGBA5551
DRM_FORMAT_XRGB1555
DRM_FORMAT_ARGB1555
DRM_FORMAT_RGB888
DRM_FORMAT_XRGB8888
DRM_FORMAT_ARGB8888
DRM_FORMAT_XBGR8888
DRM_FORMAT_XRGB2101010
DRM_FORMAT_ARGB2101010
v10:
* move and simplify the functions from the drm format helper to drm_panic
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-4-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This module displays a user friendly message when a kernel panic
occurs. It currently doesn't contain any debug information,
but that can be added later.
v2
* Use get_scanout_buffer() instead of the drm client API.
(Thomas Zimmermann)
* Add the panic reason to the panic message (Nerdopolis)
* Add an exclamation mark (Nerdopolis)
v3
* Rework the drawing functions, to write the pixels line by line and
to use the drm conversion helper to support other formats.
(Thomas Zimmermann)
v4
* Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
* Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
* Add foreground/background color config option
* Fix the bottom lines not painted if the framebuffer height
is not a multiple of the font height.
* Automatically register the device to drm_panic, if the function
get_scanout_buffer exists. (Thomas Zimmermann)
v5
* Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
* Also add drm_fb_fill() to fill area with background color.
* Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
* Add a flush() callback for drivers that needs to synchronize the buffer.
* Add a void *private field, so drivers can pass private data to
draw_pixel_xy() and flush().
v6
* Fix sparse warning for panic_msg and logo.
v7
* Add select DRM_KMS_HELPER for the color conversion functions.
v8
* Register directly each plane to the panic notifier (Sima)
* Add raw_spinlock to properly handle concurrency (Sima)
* Register plane instead of device, to avoid looping through plane
list, and simplify code.
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
* Removed the draw_pixel_xy() API, will see later if it can be added back.
v9
* Revert to using get_scanout_buffer() (Sima)
* Move get_scanout_buffer() and panic_flush() to the plane helper
functions (Thomas Zimmermann)
* Register all planes with get_scanout_buffer() to the panic notifier
* Use drm_panic_lock() to protect against race (Sima)
v10
* Move blit and fill functions back in drm_panic (Thomas Zimmermann).
* Simplify the text drawing functions.
* Use kmsg_dumper instead of panic_notifier (Sima).
v12
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
* Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
blkdev_dio_unaligned() is called from __blkdev_direct_IO(),
__blkdev_direct_IO_simple(), and __blkdev_direct_IO_async(), and all these
are only called from blkdev_direct_IO().
Move the blkdev_dio_unaligned() call to the common callsite,
blkdev_direct_IO().
Pass those functions the bdev pointer from blkdev_direct_IO(), as it is
non-trivial to look up.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240415122020.1541594-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rough sketch for the locking of drm panic printing code. The upshot of
this approach is that we can pretty much entirely rely on the atomic
commit flow, with the pair of raw_spin_lock/unlock providing any
barriers we need, without having to create really big critical
sections in code.
This also avoids the need that drivers must explicitly update the
panic handler state, which they might forget to do, or not do
consistently, and then we blow up in the worst possible times.
It is somewhat racy against a concurrent atomic update, and we might
write into a buffer which the hardware will never display. But there's
fundamentally no way to avoid that - if we do the panic state update
explicitly after writing to the hardware, we might instead write to an
old buffer that the user will barely ever see.
Note that an rcu protected deference of plane->state would give us the
the same guarantees, but it has the downside that we then need to
protect the plane state freeing functions with call_rcu too. Which
would very widely impact a lot of code and therefore doesn't seem
worth the complexity compared to a raw spinlock with very tiny
critical sections. Plus rcu cannot be used to protect access to
peek/poke registers anyway, so we'd still need it for those cases.
Peek/poke registers for vram access (or a gart pte reserved just for
panic code) are also the reason I've gone with a per-device and not
per-plane spinlock, since usually these things are global for the
entire display. Going with per-plane locks would mean drivers for such
hardware would need additional locks, which we don't want, since it
deviates from the per-console takeoverlocks design.
Longer term it might be useful if the panic notifiers grow a bit more
structure than just the absolute bare
EXPORT_SYMBOL(panic_notifier_list) - somewhat aside, why is that not
EXPORT_SYMBOL_GPL ... If panic notifiers would be more like console
drivers with proper register/unregister interfaces we could perhaps
reuse the very fancy console lock with all it's check and takeover
semantics that John Ogness is developing to fix the console_lock mess.
But for the initial cut of a drm panic printing support I don't think
we need that, because the critical sections are extremely small and
only happen once per display refresh. So generally just 60 tiny locked
sections per second, which is nothing compared to a serial console
running a 115kbaud doing really slow mmio writes for each byte. So for
now the raw spintrylock in drm panic notifier callback should be good
enough.
Another benefit of making panic notifiers more like full blown
consoles (that are used in panics only) would be that we get the two
stage design, where first all the safe outputs are used. And then the
dangerous takeover tricks are deployed (where for display drivers we
also might try to intercept any in-flight display buffer flips, which
if we race and misprogram fifos and watermarks can hang the memory
controller on some hw).
For context the actual implementation on the drm side is by Jocelyn
and this patch is meant to be combined with the overall approach in
v7 (v8 is a bit less flexible, which I think is the wrong direction):
https://lore.kernel.org/dri-devel/20240104160301.185915-1-jfalempe@redhat.com/
Note that the locking is very much not correct there, hence this
separate rfc.
Starting from v10, I (Jocelyn) have included this patch in the drm_panic
series, and done the corresponding changes.
v2:
- fix authorship, this was all my typing
- some typo oopsies
- link to the drm panic work by Jocelyn for context
v10:
- Use spinlock_irqsave/restore (John Ogness)
v11:
- Use macro instead of inline functions for drm_panic_lock/unlock (John Ogness)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-2-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A previous consolidation cleanup missed handling the case where the ring
is dying, and __io_cqring_overflow_flush() doesn't flush entries if the
CQ ring is already full. This is fine for the normal CQE overflow
flushing, but if the ring is going away, we need to flush everything,
even if it means simply freeing the overflown entries.
Fixes: 6c948ec44b29 ("io_uring: consolidate overflow flushing")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the __io_timeout_prep function, the io_timeout list is initialized
twice, removing the meaningless second initialization.
Signed-off-by: Ruyi Zhang <ruyi.zhang@samsung.com>
Link: https://lore.kernel.org/r/20240411055953.2029218-1-ruyi.zhang@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're exporting some io_uring bits to networking, e.g. for implementing
a net callback for io_uring cmds, but we don't want to expose more than
needed. Add a separate header for networking.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240409210554.1878789-1-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller doesn't handle the return value of io_put_kbuf_comp(), so
change its return type into void.
Also follow Jens's suggestion to rename it as io_put_kbuf_drop().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240407132759.4056167-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_put_rsrc_locked() is a weird shim function around
io_req_put_rsrc(). All calls to io_req_put_rsrc() require holding
->uring_lock, so we can just use it directly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a195bc78ac3d2c6fbaea72976e982fe51e50ecdd.1712331455.git.asml.silence@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_complete_post() was a sole user of ->locked_free_list, but
since we just gutted the function, the cache is not used anymore and
can be removed.
->locked_free_list served as an asynhronous counterpart of the main
request (i.e. struct io_kiocb) cache for all unlocked cases like io-wq.
Now they're all forced to be completed into the main cache directly,
off of the normal completion path or via io_free_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7bffccd213e370abd4de480e739d8b08ab6c1326.1712331455.git.asml.silence@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_complete_post() is now io-wq only and shouldn't be used outside
of it, i.e. it relies that io-wq holds a ref for the request as
explained in a comment below. Let's add a warning to enforce the
assumption and make sure nobody would try to do anything weird.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1013b60c35d431d0698cafbc53c06f5917348c20.1712331455.git.asml.silence@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 8f6c829491fe ("io_uring: remove struct io_tw_state::locked"),
io_req_complete_post() is only called from io-wq submit work, where the
request reference is guaranteed to be grabbed and won't drop to zero
in io_req_complete_post().
Kill the dead code, meantime add req_ref_put() to put the reference.
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1d8297e2046553153e763a52574f0e0f4d512f86.1712331455.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few of those:
io_uring/fdinfo.c:170:16: warning: declaration shadows a local variable [-Wshadow]
170 | struct file *f = io_file_from_index(&ctx->file_table, i);
| ^
io_uring/fdinfo.c:53:67: note: previous declaration is here
53 | __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f)
| ^
io_uring/cancel.c:187:25: warning: declaration shadows a local variable [-Wshadow]
187 | struct io_uring_task *tctx = node->task->io_uring;
| ^
io_uring/cancel.c:166:31: note: previous declaration is here
166 | struct io_uring_task *tctx,
| ^
io_uring/register.c:371:25: warning: declaration shadows a local variable [-Wshadow]
371 | struct io_uring_task *tctx = node->task->io_uring;
| ^
io_uring/register.c:312:24: note: previous declaration is here
312 | struct io_uring_task *tctx = NULL;
| ^
and a simple cleanup gets rid of them. For the fdinfo case, make a
distinction between the file being passed in (for the ring), and the
registered files we iterate. For the other two cases, just get rid of
shadowed variable, there's no reason to have a new one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the related code from io_uring.c into memmap.c. No functional
changes in this patch, just cleaning it up a bit now that the full
transition is done.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_page() and have it Just Work.
This requires a bit of effort on the mmap lookup side, as the ctx
uring_lock isn't held, which otherwise protects buffer_lists from being
torn down, and it's not safe to grab from mmap context that would
introduce an ABBA deadlock between the mmap lock and the ctx uring_lock.
Instead, lookup the buffer_list under RCU, as the the list is RCU freed
already. Use the existing reference count to determine whether it's
possible to safely grab a reference to it (eg if it's not zero already),
and drop that reference when done with the mapping. If the mmap
reference is the last one, the buffer_list and the associated memory can
go away, since the vma insertion has references to the inserted pages at
that point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids needing to care about HIGHMEM, and it makes the buffer
indexing easier as both ring provided buffer methods are now virtually
mapped in a contigious fashion.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move it into io_uring.c where it belongs, and use it in there as well
rather than have two implementations of this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the last holdout which does odd page checking, convert it to
vmap just like what is done for the non-mmap path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_pages() and have it Just Work.
If possible, allocate a single compound page that covers the range that
is needed. If that works, then we can just use page_address() on that
page. If we fail to get a compound page, allocate single pages and use
vmap() to map them into the kernel virtual address space.
This just covers the rings/sqes, the other remaining user of the mmap
remap_pfn_range() user will be converted separately. Once that is done,
we can kill the old alloc/free code.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An identical one exists for vm_insert_page(), add one for
vm_insert_pages() to avoid needing to check for CONFIG_MMU in code using
it.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While valid C, anonymous enums confuse Cython (Python to C translator),
as reported by Ritesh (YoSTEALTH) [1] . Since people rely on it when
building against liburing and we want to keep this header in sync with
the library version, let's name the existing enums in the uapi header.
[1] https://github.com/cython/cython/issues/3240
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240328210935.25640-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_task_work_pending() uses wq_list_empty() on ctx->work_llist, but it's
not an io_wq_work_list, it's a struct llist_head. They both have
->first as head-of-list, and it turns out the checks are identical. But
be proper and use the right helper.
Fixes: dac6a0eae7 ("io_uring: ensure iopoll runs local task work as well")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The object list is a bit of a mess, with core and opcode files mixed in.
Re-arrange it so that we have the core bits first, and then opcode
specific files after that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The allocator will generally return memory in order, but
__io_alloc_req_refill() then adds them to a stack and we'll extract them
in the opposite order. This obviously isn't a huge deal, but:
1) it makes debugging easier when they are in order
2) keeping them in-order is the right thing to do
3) reduces the code for adding them to the stack
Just add them in reverse to the stack.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This should be plenty, rather than the default of 128, and matches what
we have on the rsrc and futex side as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently lists are being used to manage this, but best practice is
usually to have these in an array instead as that it cheaper to manage.
Outside of that detail, games are also played with KASAN as the list
is inside the cached entry itself.
Finally, all users of this need a struct io_cache_entry embedded in
their struct, which is union'ized with something else in there that
isn't used across the free -> realloc cycle.
Get rid of all of that, and simply have it be an array. This will not
change the memory used, as we're just trading an 8-byte member entry
for the per-elem array size.
This reduces the overhead of the recycled allocations, and it reduces
the amount of code code needed to support recycling to about half of
what it currently is.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now unused, drop the code related to it. This includes the
io_issue_defs->manual alloc field.
While in there, and since ->async_size is now being used a bit more
frequently and in the issue path, move it to io_issue_defs[].
Signed-off-by: Jens Axboe <axboe@kernel.dk>