When building malta_defconfig with CONFIG_RELOCATABLE=y, there are two
warnings due to missing prototypes for functions only used when that
configuration is enabled:
arch/mips/kernel/relocate.c:42:12: warning: no previous prototype for 'plat_post_relocation' [-Wmissing-prototypes]
42 | int __weak plat_post_relocation(long offset)
| ^~~~~~~~~~~~~~~~~~~~
arch/mips/kernel/relocate.c:324:14: warning: no previous prototype for 'relocate_kernel' [-Wmissing-prototypes]
324 | void *__init relocate_kernel(void)
| ^~~~~~~~~~~~~~~
While relocate_kernel() is only called from assembly, it makes sense to
keep the prototypes together in C to fix the warnings. Add them to
silence the warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic.
Signed-off-by: Songyang Li <leesongyang@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are some assembly macros with very generic naming
being defined asm.h. They are clashing with other macros
from C code.
Guard them with __ASSEMBLY__ to prevent futher clashes.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-mips/8d78894-dd89-9f4d-52bb-1b873c50be9c@linux-m68k.org/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
early_tlb_init() and rb532_gpio_init() were local to file but not declared
static, leading to error:
arch/mips/rb532/prom.c:49:13: error: no previous prototype for ‘prom_setup_cmdline’ [-Werror=missing-prototypes]
49 | void __init prom_setup_cmdline(void)
| ^~~~~~~~~~~~~~~~~~
arch/mips/rb532/gpio.c:200:12: error: no previous prototype for ‘rb532_gpio_init’ [-Werror=missing-prototypes]
200 | int __init rb532_gpio_init(void)
| ^~~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
early_tlb_init() was local to file but not declared static,
leading to error:
arch/mips/bcm47xx/prom.c:126:6: error: no previous prototype for ‘early_tlb_init’ [-Werror=missing-prototypes]
126 | void early_tlb_init(void)
| ^~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
bcm47xx_prom_highmem_init() is a global function declared in
arch/mips/bcm47xx/bcm47xx_private.h, but this header is not
included before the definition, causing a error:
arch/mips/bcm47xx/prom.c:134:13: error: no previous prototype for ‘bcm47xx_prom_highmem_init’ [-Werror=missing-prototypes]
134 | void __init bcm47xx_prom_highmem_init(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bd ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Parallel dio write takes a negative refcount of fi->iocachectr and so does
open of file in passthrough mode.
The refcount of passthrough mode is associated with attach/detach of a
fuse_backing object to fuse inode.
For parallel dio write, the backing file is irrelevant, so the call to
fuse_inode_uncached_io_start() passes a NULL fuse_backing object.
Passing a NULL fuse_backing will result in false -EBUSY error if the file
is already open in passthrough mode.
Allow taking negative fi->iocachectr refcount with NULL fuse_backing,
because it does not conflict with an already attached fuse_backing object.
Fixes: 4a90451bbc ("fuse: implement open in passthrough mode")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This includes following USB4/Thunderbolt fixes for v6.9-rc5:
- Avoid creating DisplayPort tunnels for the adapters on the same router
- Correct wake configurations after device router unplug
- Fix immediate wake when "wakeup_count" is used to enter system sleep.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=8qyc
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.9-rc5
This includes following USB4/Thunderbolt fixes for v6.9-rc5:
- Avoid creating DisplayPort tunnels for the adapters on the same router
- Correct wake configurations after device router unplug
- Fix immediate wake when "wakeup_count" is used to enter system sleep.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
thunderbolt: Do not create DisplayPort tunnels on adapters of the same router
After my fix yesterday, I ran into another problem of the same kind:
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_readb':
analogix_dp_core.c:(.text+0x194): undefined reference to `drm_dp_dpcd_read'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_writeb':
analogix_dp_core.c:(.text+0x214): undefined reference to `drm_dp_dpcd_write'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_stop_crc':
analogix_dp_core.c:(.text+0x4b0): undefined reference to `drm_dp_stop_crc'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_start_crc':
analogix_dp_core.c:(.text+0xbe8): undefined reference to `drm_dp_start_crc'
Add the same dependency again to ROCKCHIP_ANALOGIX_DP after checking that
nothing else selects the analogix driver. Also add a dependency to
DRM_ANALOGIX_DP to make it easier to identifier future problems of
this type when they get introduced.
Fixes: 0323287de8 ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on")
Fixes: d1ef8fc18b ("drm: fix DRM_DISPLAY_DP_HELPER dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405143531.925589-1-arnd@kernel.org
In vc4_hdmi_audio_init() of_get_address() may return
NULL which is later dereferenced. Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409075622.11783-1-amishin@t-argos.ru
When extending support for a driver-specific KMS property to additional
drivers, we should apply all the requirements for new properties and
make sure the semantics are the same and documented.
v2: devs of the driver which introduced property shall help and ack
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410122008.38207-1-sebastian.wick@redhat.com
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Shirisha Ganta <shirisha@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com
JUMP_LABEL_FEATURE_CHECK_DEBUG used static_key_intialized to determine
whether {cpu,mmu}_has_feature() is used before static keys were
initialized. However, {cpu,mmu}_has_feature() should not be used before
setup_feature_keys() is called but static_key_initialized is set well
before this by the call to jump_label_init() in early_init_devtree().
This creates a window in which JUMP_LABEL_FEATURE_CHECK_DEBUG will not
detect misuse and report errors. Add a flag specifically to indicate
when {cpu,mmu}_has_feature() is safe to use.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408052358.5030-1-nicholas@linux.ibm.com
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154859.126931-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Neither core nor the driver modifes 'struct regulator_ops', so it can be
const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414164703.239851-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor
Signed-off-by: "end.to.start" <end.to.start@mail.ru>
Link: https://lore.kernel.org/r/20240412075533.10214-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More cleanups from Brent, notably the removal of the redundant
cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and
changes to sof_rt5682 to allow for 96+ sampling rates.
For the rest of this kernel cycle, we are still working on SoundWire
updates for MeteorLake (usual missing ACPI signature required for
topology selection and jack detection information). We'll provide
those patches as soon as they are reviewed/validated.
Create a simple data struct to hold compatible data so that we don't
have to do the casts to void pointer to hold data.
Fixes the following warning:
drivers/gpu/drm/lima/lima_drv.c:387:13: error: cast to smaller integer
type 'enum lima_gpu_id' from 'const void *'
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-3-nunes.erico@gmail.com
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-2-nunes.erico@gmail.com
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-4-nunes.erico@gmail.com
In commit 53cb55b202 ("drm/lima: handle spurious timeouts due to high
irq latency") a check was added to detect an unexpectedly high interrupt
latency timeout.
With further investigation it was noted that on Mali-450 the pp bcast
irq may also be a trigger of race conditions against the timeout
handler, so add it to this check too.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-3-nunes.erico@gmail.com
This is needed because we want to reset those devices in device-agnostic
code such as lima_sched.
In particular, masking irqs will be useful before a hard reset to
prevent race conditions.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-2-nunes.erico@gmail.com
This adds a small (64 bit) per-device bitmap that tracks ranges that
have btree nodes, for accelerating btree node scan if it is ever needed.
- New helpers, bch2_dev_btree_bitmap_marked() and
bch2_dev_bitmap_mark(), for checking and updating the bitmap
- Interior btree update path updates the bitmaps when required
- The check_allocations pass has a new fsck_err check,
btree_bitmap_not_marked
- New on disk format version, mi_btree_mitmap, which indicates the new
bitmap is present
- Upgrade table lists the required recovery pass and expected fsck error
- Btree node scan uses the bitmap to skip ranges if we're on the new
version
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We shouldn't be doing the unlock/relock dance when we're not using a
path - this fixes an assertion pop when called from btree node scan.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Introduce arch_try_cmpxchg64_local() for 64-bit and 32-bit targets
to improve code using cmpxchg64_local(). On 64-bit targets, the
generated assembly improves from:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 48 85 c0 test %rax,%rax
3e32: 0f 85 9f 00 00 00 jne 3ed7 <...>
to:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 0f 85 9f 00 00 00 jne 3ed4 <...>
where a TEST instruction after CMPXCHG is saved. The improvements
for 32-bit targets are even more noticeable, because double-word
compare after CMPXCHG8B gets eliminated.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240414161257.49145-1-ubizjak@gmail.com
They can be unused with certain Kconfig variations:
kernel/events/core.c:9622:13: warning: ‘perf_event_free_bpf_handler’ defined but not used [-Wunused-function]
kernel/events/core.c:9586:12: warning: ‘perf_event_set_bpf_handler’ defined but not used [-Wunused-function]
Since they are both single-use, mark them inline.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Kyle Huey <khuey@kylehuey.com>
The test uses PERF_RECORD_SWITCH records to fill the ring buffer and
trigger the watermark wakeup, which in turn should trigger an IO
signal.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240413141618.4160-4-khuey@kylehuey.com
When running as Xen PV guest in some cases W^X violation WARN()s have
been observed. Those WARN()s are produced by verify_rwx(), which looks
into the PTE to verify that writable kernel pages have the NX bit set
in order to avoid code modifications of the kernel by rogue code.
As the NX bits of all levels of translation entries are or-ed and the
RW bits of all levels are and-ed, looking just into the PTE isn't enough
for the decision that a writable page is executable, too.
When running as a Xen PV guest, the direct map PMDs and kernel high
map PMDs share the same set of PTEs. Xen kernel initialization will set
the NX bit in the direct map PMD entries, and not the shared PTEs.
Fixes: 652c5bf380 ("x86/mm: Refuse W^X violations")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-5-jgross@suse.com
Modify _lookup_address_cpa() to no longer use lookup_address(), but
only lookup_address_in_pgd().
This is done in preparation of using lookup_address_in_pgd_attr().
No functional change intended.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-4-jgross@suse.com
Fix show_fault_oops() to not only look at the leaf PTE for detecting
NX violations, but to use the effective NX value returned by
lookup_address_in_pgd_attr() instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-3-jgross@suse.com
Add lookup_address_in_pgd_attr() doing the same as the already
existing lookup_address_in_pgd(), but returning the effective settings
of the NX and RW bits of all walked page table levels, too.
This will be needed in order to match hardware behavior when looking
for effective access rights, especially for detecting writable code
pages.
In order to avoid code duplication, let lookup_address_in_pgd() call
lookup_address_in_pgd_attr() with dummy parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-2-jgross@suse.com
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7108c1871c6cb08d403c4fa6534bc7e6de4cb23d.1705245316.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZhu2kwAKCRBZ7Krx/gZQ
62gzAP9eeADy6rQkzgWJ8d8sKzGfmd0nup9WlCOxZSR0XojTXwEAnue47dn7PlMx
wQY0joZ0V5FO8PNTEbWc2P/dSQrANgc=
=MshW
-----END PGP SIGNATURE-----
Merge tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
All supported kernels are assumed to use struct new_utsname.
This is validated in test_uname().
uname(2) can for example be used in ksft_min_kernel_version() from the
kernels selftest framework.
Link: https://lore.kernel.org/lkml/20240412123536.GA32444@redhat.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>