Use ethtool_sprintf/puts() helper functions which handle the common
pattern of printing a string into the ethtool strings interface and
incrementing the string pointer by ETH_GSTRING_LEN.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool.py depends on yml files in a specific location of the linux kernel
tree. Using relative lookup for those files means that ethtool.py would
need to be run under tools/net/ynl/. Lookup needed yml files without
depending on the current working directory that ethtool.py is invoked from.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building with W=1 shows a warning for an unused variable when CONFIG_PCI
is diabled:
drivers/ata/sata_mv.c:790:35: error: unused variable 'mv_pci_tbl' [-Werror,-Wunused-const-variable]
static const struct pci_device_id mv_pci_tbl[] = {
Move the table into the same block that containsn the pci_driver
definition.
Fixes: 7bb3c5290c ("sata_mv: Remove PCI dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This commit implements VCT in 88E308X/88E609X Family.
It require two workarounds with some magic configuration.
Regular use require only one register configuration. But Open Circuit
require second workaround.
It cause implementation two phases for fault length measuring.
Fast Ethernet PHY have implemented very simple version of VCT. It's
complitley different than vct5 or vct7.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240402201123.2961909-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs can recognize during a cable test if the impedance in the cable
is okay. They can detect reflections caused by impedance discontinuity
between a regular 100 Ohm cable and an abnormal part with a higher or
lower impedance.
This commit introduces a new result code:
ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
which represents the results of a cable test indicating issues with
impedance integrity.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240402201123.2961909-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements only basic support.
It covers PHY used in multiple IC:
PHY: 88E3082, 88E3083
Switch: 88E6096, 88E6097
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240402201123.2961909-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.
Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389] <IRQ>
[ 5325.315794] ? skb_panic+0x4f/0x60
[ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490] ? skb_panic+0x4f/0x60
[ 5325.321161] skb_put+0x4e/0x50
[ 5325.322670] mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578] __napi_poll+0x33/0x1e0
[ 5325.326328] net_rx_action+0x12e/0x280
As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.
Cc: stable@vger.kernel.org
Fixes: 2fbbd712ba ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In "struct muram_info", the 'size' field is unused.
In "struct memac_cfg", the 'fixed_link' field is unused.
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/425222d4f6c584e8316ccb7b2ef415a85c96e455.1712084103.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Remove old GC leftovers.
This is a follow-up series for commit 4090fa373f ("af_unix: Replace
garbage collection algorithm.") which introduced the new GC for AF_UNIX.
Now we no longer need two ugly tricks for the old GC, let's remove them.
====================
Link: https://lore.kernel.org/r/20240401173125.92184-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the previous GC implementation, the shape of the inflight socket
graph was not expected to change while GC was in progress.
MSG_PEEK was tricky because it could install inflight fd silently
and transform the graph.
Let's say we peeked a fd, which was a listening socket, and accept()ed
some embryo sockets from it. The garbage collection algorithm would
have been confused because the set of sockets visited in scan_inflight()
would change within the same GC invocation.
That's why we placed spin_lock(&unix_gc_lock) and spin_unlock() in
unix_peek_fds() with a fat comment.
In the new GC implementation, we no longer garbage-collect the socket
if it exists in another queue, that is, if it has a bridge to another
SCC. Also, accept() will require the lock if it has edges.
Thus, we need not do the complicated lock dance.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240401173125.92184-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we passed fds, we used to bump each file's refcount twice
in scm_fp_copy() and scm_fp_dup() before linking the socket to
gc_inflight_list.
This is because we incremented the inflight count of the socket
and linked it to the list in advance before passing skb to the
destination socket.
Otherwise, the inflight socket could have been garbage-collected
in a small race window between linking the socket to the list and
queuing skb:
CPU 1 : sendmsg(X) w/ A's fd CPU 2 : close(A)
----- -----
/* Here A's refcount is 1, and inflight count is 0 */
bump A's refcount to 2 in scm_fp_copy()
bump A's inflight count to 1
link A to gc_inflight_list
decrement A's refcount to 1
/* A's refcount == inflight count, thus A could be GC candidate */
start GC
mark A as candidate
purge A's receive queue
queue skb w/ A's fd to X
/* A is queued, but all data has been lost */
After commit 4090fa373f ("af_unix: Replace garbage collection
algorithm."), we increment the inflight count and link the socket
to the global list only when queuing the skb.
The race no longer exists, so let's not clone the fd nor bump
the count in unix_attach_fds().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240401173125.92184-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to this patch, what we can see by enabling trace_tcp_send is
only happening under two circumstances:
1) active rst mode
2) non-active rst mode and based on the full socket
That means the inconsistency occurs if we use tcpdump and trace
simultaneously to see how rst happens.
It's necessary that we should take into other cases into considerations,
say:
1) time-wait socket
2) no socket
...
By parsing the incoming skb and reversing its 4-tuple can
we know the exact 'flow' which might not exist.
Samples after applied this patch:
1. tcp_send_reset: skbaddr=XXX skaddr=XXX src=ip:port dest=ip:port
state=TCP_ESTABLISHED
2. tcp_send_reset: skbaddr=000...000 skaddr=XXX src=ip:port dest=ip:port
state=UNKNOWN
Note:
1) UNKNOWN means we cannot extract the right information from skb.
2) skbaddr/skaddr could be 0
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240401073605.37335-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introducing entry_saddr and entry_daddr parameters in this macro
for later use can help us record the reverse 4-tuple by analyzing
the 4-tuple of the incoming skb when receiving.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240401073605.37335-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 2 issues with the blamed commit.
1. When the phy is initialized, it would enable the disabled of UDPv4
checksums. The UDPv6 checksum is already enabled by default. So when
1-step is configured then it would clear these flags.
2. After the 1-step is configured, then if 2-step is configured then the
1-step would be still configured because it is not clearing the flag.
So the sync frames will still have origin timestamps set.
Fix this by reading first the value of the register and then
just change bit 12 as this one determines if the timestamp needs to
be inserted in the frame, without changing any other bits.
Fixes: ece1950283 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should ensure that same priority is not mapped to multiple
rx queues. From DesignWare Cores Ethernet Quality-of-Service
Databook, section 17.1.29 MAC_RxQ_Ctrl2:
"[...]The software must ensure that the content of this field is
mutually exclusive to the PSRQ fields for other queues, that is,
the same priority is not mapped to multiple Rx queues[...]"
Previously rx_queue_priority() function was:
- clearing all priorities from a queue
- adding new priorities to that queue
After this patch it will:
- first assign new priorities to a queue
- then remove those priorities from all other queues
- keep other priorities previously assigned to that queue
Fixes: a8f5102af2 ("net: stmmac: TX and RX queue priority configuration")
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Piotr Wejman <piotrwejman90@gmail.com>
Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting mac_managed_pm during interface up is too late.
In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.
This can be observed by the following log:
fec 5b040000.ethernet eth0: MDIO read timeout
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110
The data written will however remain in the MII_DATA register.
When the link later is set to administrative up it will trigger a call to
fec_restart() which will restore the MII_SPEED register. This triggers the
quirk explained in f166f890c8 ("net: ethernet: fec: Replace interrupt
driven MDIO with polled IO") causing an extra MII_EVENT.
This extra event desynchronizes all the MDIO register reads, causing them
to complete too early. Leading all reads to read as 0 because
fec_enet_mdio_wait() returns too early.
When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.
Fixes: 557d5dc83f ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For systems that use CPU isolation (via nohz_full), creating or destroying
a socket with SO_TIMESTAMP, SO_TIMESTAMPNS or SO_TIMESTAMPING with flag
SOF_TIMESTAMPING_RX_SOFTWARE will cause a static key to be enabled/disabled.
This in turn causes undesired IPIs to isolated CPUs.
So enable the static key unconditionally, if CPU isolation is enabled,
thus avoiding the IPIs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ZgrUiLLtbEUf9SFn@tpad
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RISC-V Vector specification states in "Appendix D: Calling
Convention for Vector State" [1] that "Executing a system call causes
all caller-saved vector registers (v0-v31, vl, vtype) and vstart to
become unspecified.". In the RISC-V kernel this is called "discarding
the vstate".
Returning from a signal handler via the rt_sigreturn() syscall, vector
discard is also performed. However, this is not an issue since the
vector state should be restored from the sigcontext, and therefore not
care about the vector discard.
The "live state" is the actual vector register in the running context,
and the "vstate" is the vector state of the task. A dirty live state,
means that the vstate and live state are not in synch.
When vectorized user_from_copy() was introduced, an bug sneaked in at
the restoration code, related to the discard of the live state.
An example when this go wrong:
1. A userland application is executing vector code
2. The application receives a signal, and the signal handler is
entered.
3. The application returns from the signal handler, using the
rt_sigreturn() syscall.
4. The live vector state is discarded upon entering the
rt_sigreturn(), and the live state is marked as "dirty", indicating
that the live state need to be synchronized with the current
vstate.
5. rt_sigreturn() restores the vstate, except the Vector registers,
from the sigcontext
6. rt_sigreturn() restores the Vector registers, from the sigcontext,
and now the vectorized user_from_copy() is used. The dirty live
state from the discard is saved to the vstate, making the vstate
corrupt.
7. rt_sigreturn() returns to the application, which crashes due to
corrupted vstate.
Note that the vectorized user_from_copy() is invoked depending on the
value of CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD. Default is 768, which
means that vlen has to be larger than 128b for this bug to trigger.
The fix is simply to mark the live state as non-dirty/clean prior
performing the vstate restore.
Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-8abdb41-2024-03-26/unpriv-isa-asciidoc.pdf # [1]
Reported-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: Vineet Gupta <vgupta@kernel.org>
Fixes: c2a658d419 ("riscv: lib: vectorize copy_to_user/copy_from_user")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Vineet Gupta <vineetg@rivosinc.com>
Link: https://lore.kernel.org/r/20240403072638.567446-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The function using this is hidden in an #ifdef, so the variable
needs the same one for a clean W=1 build:
drivers/i2c/busses/i2c-pxa.c:327:26: error: 'icr_bits' defined but not used [-Werror=unused-const-variable=]
Fixes: d6a7b5f84b ("[ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The kstack_offset variable was really only ever using the low bits for
kernel stack offset entropy. Add a ror32() to increase bit diffusion.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Link: https://lore.kernel.org/r/20240309202445.work.165-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This is one of the drivers with an unused variable that is marked 'const'.
Adding a __used annotation here avoids the warning and lets us enable
the option by default:
lib/test_ubsan.c:137:28: error: unused variable 'skip_ubsan_array' [-Werror,-Wunused-const-variable]
Fixes: 4a26f49b7b ("ubsan: expand tests and reporting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-3-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The .head.text section carries the startup code that runs with the MMU
off or with a translation of memory that deviates from the ordinary one.
So avoid instrumentation with the stackleak plugin, which already avoids
.init.text and .noinstr.text entirely.
Fixes: 48204aba80 ("x86/sme: Move early SME kernel encryption handling into .head.text")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403221630.2692c998-oliver.sang@intel.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240328064256.2358634-2-ardb+git@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Since mbox_cmd.size_out is overwritten with the actual output size in
the function below, it needs to be initialized every time.
cxl_internal_send_cmd -> __cxl_pci_mbox_send_cmd
Problem scenario:
1) The size_out variable is initially set to the size of the mailbox.
2) Read an event.
- size_out is set to 160 bytes(header 32B + one event 128B).
- Two event are created while reading.
3) Read the new *two* events.
- size_out is still set to 160 bytes.
- Although the value of out_len is 288 bytes, only 160 bytes are
copied from the mailbox register to the local variable.
- record_count is set to 2.
- Accessing records[1] will result in reading incorrect data.
Fixes: 6ebe28f9ec ("cxl/mem: Read, trace, and clear events on driver load")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kwangjin Ko <kwangjin.ko@sk.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In some older distros the build is failing due to
-Werror=maybe-uninitialized, in this case we know that this isn't the
case because 'arch' gets initialized by evsel__get_arch(), so make sure
it is initialized to NULL before returning from evsel__get_arch(), as
suggested by Ian Rogers.
E.g.:
32 17.12 opensuse:15.5 : FAIL gcc version 7.5.0 (SUSE Linux)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2269:15: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
struct arch *arch;
^~~~
cc1: all warnings being treated as errors
43 7.30 ubuntu:18.04-x-powerpc64el : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2351:36: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (map__dso(ms->map)->kernel && arch__is(arch, "x86") &&
^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fUqtjxAsmdGrnkjhUTLHs-JvV10TtxyocpYDJK_+LYTiQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, when libtraceevent is not linked,
perf does not support tracepoint:
# ./perf record -e sched:sched_switch -a sleep 10
event syntax error: 'sched:sched_switch'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
For cross-compilation scenario, library may not be installed in the default
system path. Based on the above requirements, add LIBTRACEEVENT_DIR build
option to support specifying path of libtraceevent.
Example:
1. Cross compile libtraceevent
# cd /opt/libtraceevent
# CROSS_COMPILE=aarch64-linux-gnu- make
2. Cross compile perf
# cd tool/perf
# make VF=1 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- NO_LIBELF=1 LDFLAGS=--static LIBTRACEEVENT_DIR=/opt/libtraceevent
<SNIP>
Auto-detecting system features:
<SNIP>
... LIBTRACEEVENT_DIR: /opt/libtraceevent
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240314063000.2139877-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.
Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Distinguish PS4/PS5 type controllers using .driver_data in
MODULE_DEVICE_TABLE rather than by VID/PID.
This allows adding compatible controllers with different VID/PID.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers never switch to the full 0x11 report.
They keep sending the short 0x01 report, so let's parse that instead.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers can't report calibration data for the
gyro/accelerometer.
We can still use the gamepad as-is, so let's do that.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers can't report firmware/hardware version.
Unlike for the DualSense, the driver does not use these values for
anything in the DualShock 4 case, but merely exposes them via sysfs.
They will simply be 0x0.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There was no way to disable blinking once enabled.
Disable it on brightness = 0, as per the Linux LED spec.
The driver reports back the values it sends to the controller, but they
need to be scaled back to milliseconds. Setting the LED blinking via
sysfs works as expected now.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Both the vdso rework and the CONFIG_PAGE_SHIFT changes were merged during
the v6.9 merge window, so it is now possible to use CONFIG_PAGE_SHIFT
instead of including asm/page.h in the vdso.
This avoids the workaround for arm64 - commit 8b3843ae36 ("vdso/datapage:
Quick fix - use asm/page-def.h for ARM64") and addresses a build warning
for powerpc64:
In file included from <built-in>:4:
In file included from /home/arnd/arm-soc/arm-soc/lib/vdso/gettimeofday.c:5:
In file included from ../include/vdso/datapage.h:25:
arch/powerpc/include/asm/page.h:230:9: error: result of comparison of constant 13835058055282163712 with expression of type 'unsigned long' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
230 | return __pa(kaddr) >> PAGE_SHIFT;
| ^~~~~~~~~~~
arch/powerpc/include/asm/page.h:217:37: note: expanded from macro '__pa'
217 | VIRTUAL_WARN_ON((unsigned long)(x) < PAGE_OFFSET); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
arch/powerpc/include/asm/page.h:202:73: note: expanded from macro 'VIRTUAL_WARN_ON'
202 | #define VIRTUAL_WARN_ON(x) WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && (x))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
arch/powerpc/include/asm/bug.h:88:25: note: expanded from macro 'WARN_ON'
88 | int __ret_warn_on = !!(x); \
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240320180228.136371-1-arnd@kernel.org
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches factors out some repeated code to clean up
firmware control read/write functions, and removes some redundant
control notification code.
base-commit: f193957b0f
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current implementation, CIFS close sends a close to the
server and does not check for the success of the server close.
This patch adds functionality to check for server close return
status and retries in case of an EBUSY or EAGAIN error.
This can help avoid handle leaks
Cc: stable@vger.kernel.org
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The test case test_cgcore_lesser_ns_open only tasks effect when cgroup2
is mounted with "nsdelegate" mount option. If it misses this option, or
is remounted without "nsdelegate", the test case will fail. For example,
running bpf/test_cgroup_storage first, and then run cgroup/test_core will
fail on test_cgcore_lesser_ns_open. Skip it if "nsdelegate" is not
detected in cgroup2 mount options.
Fixes: bf35a7879f ("selftests: cgroup: Test open-time cgroup namespace usage for migration checks")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tejun Heo <tj@kernel.org>