The memory bandwidth software controller uses 2^20 units rather than
10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M"
Linux define for 0x00100000.
Update the documentation to use MiB when describing this feature.
It's too late to fix the mount option "mba_MBps" as that is now an
established user interface.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240322182016.196544-1-tony.luck@intel.com
1) Prevent endless timer requeuing which is caused by two CPUs racing out
of idle. This happens when the last CPU goes idle and therefore has to
ensure to expire the pending global timers and some other CPU come out
of idle at the same time and the other CPU wins the race and expires
the global queue. This causes the last CPU to chase ghost timers
forever and reprogramming it's clockevent device endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
2) The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent which
in turn causes the timer to be not programmed and not being expired on
time.
Restore the idle tracking for the global timer base so that the self
IPI condition for NOHZ full is working correctly again.
-----BEGIN PGP SIGNATURE-----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=lY5O
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two regression fixes for the timer and timer migration code:
- Prevent endless timer requeuing which is caused by two CPUs racing
out of idle. This happens when the last CPU goes idle and therefore
has to ensure to expire the pending global timers and some other
CPU come out of idle at the same time and the other CPU wins the
race and expires the global queue. This causes the last CPU to
chase ghost timers forever and reprogramming it's clockevent device
endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
- The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent
which in turn causes the timer to be not programmed and not being
expired on time.
Restore the idle tracking for the global timer base so that the
self IPI condition for NOHZ full is working correctly again"
* tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix removed self-IPI on global timer's enqueue in nohz_full
timers/migration: Fix endless timer requeue after idle interrupts
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide. This
restricted obviously the possible range of the prescaler adjustments.
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized.
- A set of device tree updates to support new system on chips in various
drivers.
- Kernel-doc and other cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=M9Gu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the trigger
type is changed
- Clear the interrupt status register when setting up edge type trigger
modes.
- Ensure that the trigger type and routing information is set before the
interrupt is enabled.
-----BEGIN PGP SIGNATURE-----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=zIKG
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of fixes for the Renesas RZG21 interrupt chip driver to
prevent spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the
trigger type is changed
- Clear the interrupt status register when setting up edge type
trigger modes
- Ensure that the trigger type and routing information is set before
the interrupt is enabled"
* tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time
irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type
irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
THe trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number is
re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change does
not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number after
the tracepoint.
-----BEGIN PGP SIGNATURE-----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=iW0L
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Thomas Gleixner:
"A single fix for the generic entry code:
The trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number
is re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change
does not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number
after the tracepoint"
* tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Respect changes to system call number by trace_sys_enter()
- Handle errors in mark_rodata_ro() and mark_initmem_nx().
- Make struct crash_mem available without CONFIG_CRASH_DUMP.
Thanks to: Christophe Leroy, Hari Bathini.
-----BEGIN PGP SIGNATURE-----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=edty
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
-----BEGIN PGP SIGNATURE-----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=f4r2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
-----BEGIN PGP SIGNATURE-----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=1LW2
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Restrict it to the early detection call.
Fixes: 81287ad65d ("x86/apic: Sanitize APIC address setup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
If there is no local APIC enumerated and registered then the topology
bitmaps are empty. Therefore, topology_init_possible_cpus() will die with
a division by zero exception.
Prevent this by registering a fake APIC id to populate the topology
bitmap. This also allows to use all topology query interfaces
unconditionally. It does not affect the actual APIC code because either
the local APIC address was not registered or no local APIC could be
detected.
Fixes: f1f758a805 ("x86/topology: Add a mechanism to track topology via APIC IDs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
The local APICs have not yet been enumerated so the logical ID evaluation
from the topology bitmaps does not work and would return an error code.
Skip the evaluation during the early boot CPUID evaluation and only apply
it on the final run.
Fixes: 380414be78 ("x86/cpu/topology: Use topology logical mapping mechanism")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.186943142@linutronix.de
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
The verifier allows using the addr_space_cast instruction in a program
that doesn't have an associated arena. This was caught in the form an
invalid memory access in do_misc_fixups() when while converting
addr_space_cast to a normal 32-bit mov, env->prog->aux->arena was
dereferenced to check for BPF_F_NO_USER_CONV flag.
Reject programs that include the addr_space_cast instruction but don't
have an associated arena.
root@rv-tester:~# ./reproducer
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000030
Oops [#1]
[<ffffffff8017eeaa>] do_misc_fixups+0x43c/0x1168
[<ffffffff801936d6>] bpf_check+0xda8/0x22b6
[<ffffffff80174b32>] bpf_prog_load+0x486/0x8dc
[<ffffffff80176566>] __sys_bpf+0xbd8/0x214e
[<ffffffff80177d14>] __riscv_sys_bpf+0x22/0x2a
[<ffffffff80d2493a>] do_trap_ecall_u+0x102/0x17c
[<ffffffff80d3048c>] ret_from_exception+0x0/0x64
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLz09O1+2gGVJuCxd_24a-7UueXzV-Ff+Fr+h5EKFDiYCQ@mail.gmail.com/
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240322153518.11555-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently converts addr_space_cast from as(1) to as(0) that
is: BPF_ALU64 | BPF_MOV | BPF_X with off=1 and imm=1
to
BPF_ALU | BPF_MOV | BPF_X with imm=1 (32-bit mov)
Because of this imm=1, the JITs that have bpf_jit_needs_zext() == true,
interpret the converted instruction as BPF_ZEXT_REG(DST) which is a
special form of mov32, used for doing explicit zero extension on dst.
These JITs will just zero extend the dst reg and will not move the src to
dst before the zext.
Fix do_misc_fixups() to set imm=0 when converting addr_space_cast to a
normal mov32.
The JITs that have bpf_jit_needs_zext() == true rely on the verifier to
emit zext instructions. Mark dst_reg as subreg when doing cast from
as(1) to as(0) so the verifier emits a zext instruction after the mov.
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240321153939.113996-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cited commit started returning an error when user space requests to dump
the interface's IPv6 addresses and IPv6 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
inet6 fe80::1852:2ff:fe5a:c26e/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1e:9b:94:00:ac:e8 brd ff:ff:ff:ff:ff:ff
inet6 fe80::1c9b:94ff:fe00:ace8/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
inet6 fe80::4035:fcff:fe53:66cf/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
Fixes: 9cc4cc329d ("ipv6: use xa_array iterator to implement inet6_dump_addr()")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/7e261328-42eb-411d-b1b4-ad884eeaae4d@linux.dev/
Tested-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240321173042.2151756-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "*hw_stats_used" value needs to be set on the success paths to prevent
an uninitialized variable bug in the caller, nla_put_nh_group_stats().
Fixes: 5072ae00ae ("net: nexthop: Expose nexthop group HW stats to user space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f08ac289-d57f-4a1a-830f-cf9a0563cb9c@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we set members of simple nested structures in requests
we need to set "presence" bits for all the nesting layers
below. This has nothing to do with the presence type of
the last layer.
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out logic for converting numa node to hv_proximity_domain_info
into a helper function.
Change hv_proximity_domain_info to a struct to improve readability.
While at it, rename hv_add_logical_processor_* structs to the correct
hv_input_/hv_output_ prefix, and remove the flags field which is not
present in the ABI.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com>
The current message for telling the user that their compiler does not
support the counted_by attribute in the FAM_BOUNDS test does not make
much sense either grammatically or semantically. Fix it to make it
correct in both aspects.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240321-lkdtm-improve-lack-of-counted_by-msg-v1-1-0fbf7481a29c@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The new sec_def specifies sk_skb program type with
BPF_SK_SKB_VERDICT attachment type. This way, libbpf
will set expected_attach_type properly for the program.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240319175412.2941149-1-yonghong.song@linux.dev
With both XEHPSDV and PVC removed (as platforms, most of their code
remain used by others), there's no need to handle !RCS_MASK() as
other platforms don't ever have fused-off render. Remove those code
paths and the special WA flag when initializing GuC.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for PVC were never added and platform always marked with
force_probe. Drop what's not used and rename some places as needed.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With no platform using graphics/media IP_VER(12, 50), replace the
checks throughout the code with IP_VER(12, 55) so the code makes sense
by itself with no additional explanation of previous baggage.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
All the platforms that inherit the media/graphics version
from XE_HPM_FEATURES / XE_HP_FEATURES just override it to another
version. Just set the version directly in the respective struct
and remove the versions from the _FEATURES macros. Since that was the
only use for XE_HPM_FEATURES, remove it completely.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that DG2 is the only user of this forcewake table, remove the macro
and use FORCEWAKE_RENDER explicitly for range 0xd800 - 0xd87f.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block). More recently the SCSI based UFS
(Universal Flash Storage) drivers have wanted to take advantage of
this as well, for the same reasons as f2fs, necessitating plumbing the
write hints through the block layer and then adding it to the SCSI
core. The vfs write_hints pull you've already taken plumbs this as
far as block and this pull request completes the SCSI core enabling
based on a recently agreed reuse of the old write command group
number. The additions to the scsi_debug driver are for emulating this
property so we can run tests on it in the absence of an actual UFS
device.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZf3owyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdaeAQCdEb5j
d7sJiKTpSpgH0znAJ7UTvwUh6UJu/dj47D4qngEA43IULG8+L4GXDHL9mwCfeHC5
PU7UewCEqnRBSBTdiEw=
=9Xr2
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
Reducing the size of ucode_prefix to 25 in the gfx_v11_0_init_microcode
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c: In function ‘gfx_v11_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:54: warning: ‘_pfp.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:54: warning: ‘_me.bin’ directive output may be truncated writing 7 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 40
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:70: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:25: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:54: warning: ‘_mec.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC [M] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_clockpowergating.o
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reducing the size of ucode_prefix to 25 in the smu_v11_0_init_microcode
function. we ensure that fw_name can accommodate the maximum possible
string size
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c: In function ‘smu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:54: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 36
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace separate parameters with struct ta_ras_query_address_input.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The size of fw_name is increased to ensure that it can accommodate
the maximum possible size of the string being written into it.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c: In function ‘gfx_v9_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
| ^~
......
1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:17: note: ‘snprintf’ output between 23 and 52 bytes into a destination of size 30
1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:25: note: ‘snprintf’ output between 21 and 50 bytes into a destination of size 30
1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
| ^~
......
1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:25: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 30
1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The total size of the fw_name buffer is 8 (for "amdgpu/") + 30 (for
ucode_prefix) + 5 (for "_pfp") + 5 (for "_wks") + 5 (for ".bin") = 53
characters.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c: In function ‘gfx_v10_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:62: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:54: warning: ‘_mec2’ directive output may be truncated writing 5 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:9: note: ‘snprintf’ output between 17 and 50 bytes into a destination of size 40
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The snprintf function is used to write a formatted string into fw_name.
The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced
by the string in ucode_prefix and the second %s is replaced by either
"_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE.
The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the
length of ucode_prefix and the length of the string "_2" or "1". The
size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29
characters (since one character is needed for the null terminator).
Therefore, the maximum possible length of the string written into
fw_name is 16 + 29 + 2 = 47 characters.
The size of fw_name is 40, so if the length of the string written into
fw_name is more than 39 characters (since one character is needed for
the null terminator), it will be truncated by the snprintf function, and
thus warnings will be seen.
By increasing the size of fw_name to 50, we ensure that fw_name is
large enough to hold the maximum possible length of the string, so the
snprintf function will not truncate the output.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40
1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1483 | ucode_prefix,
| ~~~~~~~~~~~~~
1484 | pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=]
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
1478 | ucode_prefix,
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1478 | ucode_prefix,
| ~~~~~~~~~~~~~
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~
1478 | ucode_prefix,
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40
1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1478 | ucode_prefix,
| ~~~~~~~~~~~~~
1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1490 | ucode_prefix);
| ~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reducing the size of ucode_prefix to 25 in the amdgpu_vcn_early_init
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c: In function ‘amdgpu_vcn_early_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:73: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 2 and 31 [-Wformat-truncation=]
105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
| ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:25: note: ‘snprintf’ output between 14 and 43 bytes into a destination of size 40
105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And set the socket id.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Destroy the high priority workqueue that handles interrupts
during KFD node cleanup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TLB flush after unmap accidentially was removed on
gfx9.4.2. It is to add it back.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refractor devcoredump code into new files since its
functionality is expanded further and better to slit
and devcoredump to have its own file.
v2: Fix the build failure caught by arm compiler
of implicit function declaration with #ifdef
v3: squash in fix for implicit declaration error
Cc: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix few problems for DCN35
- Fix a bug which dereferences freed memory
- Enable new interface design for alternate scrambling
- Enhance IPS handshake
- Increase Z8 watermark times
- Fix DML2 problem
- Revert patch which cause regression
- Fix problems for dmub idle power optimization
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For DML2 to decouple it from other DML versions.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During minimal transition commit, the base state could be freed if it is current state.
This is because after committing minimal transition state, the current state will be
swapped to the minimal transition state and the old current state will be released.
the release could cause the old current state's memory to be freed. However dc
will derefernce this memory when release minimal transition state. Therefore, we
need to retain the old current state until we release minimal transition state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix mode2 reset failure.
Should power on VPE when hw_init.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>