Commit graph

1,309,163 commits

Author SHA1 Message Date
Matthieu Baerts (NGI0)
5b49c41ac8 mptcp: avoid printing warning once on client side
After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:

  MPTCP: bogus mpc option on established client sk

That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.

Fixes: e4a0fa47e8 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:41:55 -08:00
Geliang Tang
7092dbee23 selftests: mptcp: rm subflow with v4/v4mapped addr
Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609d ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:41:55 -08:00
Geliang Tang
535d620ea5 mptcp: map v4 address to v6 when destroying subflow
Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:

    userspace_pm_add_addr $ns1 10.0.2.1 10
    userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED

That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.

This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:41:55 -08:00
Eric Dumazet
c3718936ec ipv6: anycast: complete RCU handling of struct ifacaddr6
struct ifacaddr6 are already freed after RCU grace period.

Add __rcu qualifier to aca_next pointer, and idev->ac_list

Add relevant rcu_assign_pointer() and dereference accessors.

ipv6_chk_acast_dev() no longer needs to acquire idev->lock.

/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.

Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:40:34 -08:00
Varshini Rajendran
5c237967e6 dt-bindings: net: cdns,macb: add sam9x7 ethernet interface
Add documentation for sam9x7 ethernet interface.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240223172228.671553-1-varshini.rajendran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:39:56 -08:00
Eric Dumazet
0d60d8df6f dpll: rely on rcu for netdev_dpll_pin()
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.

Add rcu protection to "struct dpll_pin"

Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.

Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.

v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)

Fixes: 5f18426928 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:39:34 -08:00
Breno Leitao
3a25e21230 net/vsockmon: Do not set zeroed statistics
Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:39:10 -08:00
Breno Leitao
bcd53aff4d net/vsockmon: Leverage core stats allocator
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the vsockmon driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:39:09 -08:00
Oleksij Rempel
0e67899abf lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.

Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.

Fixes: e69647a19c ("lan78xx: Set ASD in MAC_CR when EEE is enabled.")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26 18:38:01 -08:00
Bart Van Assche
af180c0880 scsi: scsi_debug: Maintain write statistics per group number
Track per GROUP NUMBER how many write commands have been processed. Make
this information available in sysfs. Reset these statistics if any data
is written into the sysfs attribute.

Note: SCSI devices should only interpret the information in the GROUP
NUMBER field as a stream identifier if the ST_ENBLE bit has been set to
one. This patch follows a simpler approach: count the number of writes
per GROUP NUMBER whether or not the group number represents a stream
identifier.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-20-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:27 -05:00
Bart Van Assche
ad620becda scsi: scsi_debug: Implement GET STREAM STATUS
Implement the GET STREAM STATUS SCSI command. Report that the first
five stream indexes correspond to permanent streams.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:27 -05:00
Bart Van Assche
f8ab271017 scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
Implement an IO Advice Hints Grouping mode page with three permanent
streams. A permanent stream is a stream for which the device server does
not allow closing or otherwise modifying the configuration of that
stream. The stream identifier enable (ST_ENBLE) bit specifies whether
the stream identifier may be used in the GROUP NUMBER field of SCSI
WRITE commands.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:27 -05:00
Bart Van Assche
b952eb270d scsi: scsi_debug: Allocate the MODE SENSE response from the heap
Make the MODE SENSE response buffer larger and allocate it from the heap.
This patch prepares for adding support for the IO Advice Hints Grouping
mode page.

Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
f19c3e4fe2 scsi: scsi_debug: Rework subpage code error handling
Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
b2f860903f scsi: scsi_debug: Rework page code error handling
Instead of tracking whether or not the page code is valid in a boolean
variable, jump to error handling code if an unsupported page code is
encountered.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
b1e5c0b34d scsi: scsi_debug: Support the block limits extension VPD page
>From SBC-5 r05:

"Reduced stream control:
a) reduces the maximum number of streams that the device server supports;
   and
b) increases the number of write commands that are able to specify a stream
   to be written in any write command that contains the GROUP NUMBER field
   in its CDB.

If the RSCS bit (see 6.6.5) is set to one, then the device server shall:
a) support per group stream identifier usage as described in 4.32.2;
b) support the IO Advice Hints Grouping mode page (see 6.5.7); and
c) set the MAXIMUM NUMBER OF STREAMS field (see 6.6.5) to a value that is
   less than 64.

Device servers that set the RSCS bit to one may support other features
(e.g., permanent streams (see 4.32.4)).

4.32.4 Permanent streams

A permanent stream is a stream for which the device server does not allow
closing or otherwise modifying the configuration of that stream. The PERM
bit (see 5.9.2.3) indicates whether a stream is a permanent stream. If a
STREAM CONTROL command (see 5.32) specifies the closing of a permanent
stream, the device server terminates that command with CHECK CONDITION
status instead of closing the specified stream. A permanent stream is always
an open stream. Device severs should assign the lowest numbered stream
identifiers to permanent streams."

Report that reduced stream control is supported.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
a5fe98eb8f scsi: scsi_debug: Reduce code duplication
All VPD pages have the page code in byte one. Reduce code duplication by
storing the VPD page code once.

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
4f53138fff scsi: sd: Translate data lifetime information
Recently T10 standardized SBC constrained streams. This mechanism allows to
pass data lifetime information to SCSI devices in the group number field.
Add support for translating write hint information into a permanent stream
number in the sd driver. Use WRITE(10) instead of WRITE(6) if data lifetime
information is present because the WRITE(6) command does not have a GROUP
NUMBER field.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
4977c0f452 scsi: scsi_proto: Add structures and constants related to I/O groups and streams
Prepare for adding code that will query the I/O advice hints group
descriptors and for adding code that will retrieve the stream status.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Bart Van Assche
96b171d6db scsi: core: Query the Block Limits Extension VPD page
Parse the Reduced Stream Control Supported (RSCS) bit from the block limits
extension VPD page. The RSCS bit is defined in SBC-5 r05
(https://www.t10.org/cgi-bin/ac.pl?t=f&f=sbc5r05.pdf).

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:37:26 -05:00
Ricardo B. Marliere
517bcc2b4d scsi: core: Constify the struct device_type usage
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
scsi_host_type, scsi_target_type and scsi_dev_type variables to be constant
structures as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-scsi-v1-1-c5edf2afe178@marliere.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:22:26 -05:00
Justin Stitt
3e24118ec1 scsi: libfc: replace deprecated strncpy() with memcpy()
strncpy() is deprecated [1] and as such we should use different apis to
copy string data.

We can see that ct is NUL-initialized with fc_ct_hdr_fill:
|       ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len,
...

In fc_ct_hdr_fill():
|       memset(ct, 0, ct_plen);

We also calculate the length of the source string:
|       len = strnlen(fc_host_symbolic_name(lport->host), 255);

...then this argument is used in strncpy(), which is bad because the
pattern of (dest, src, strlen(src)) usually leaves the destination
buffer without NUL-termination. However, it looks as though we do not
require NUL-termination since fr_name is part of a seq_buf-like
structure wherein its length is monitored:
|       struct fc_ns_rspn {
|       	struct fc_ns_fid fr_fid;	/* port ID object */
|       	__u8		fr_name_len;
|       	char		fr_name[];
|       } __attribute__((__packed__));

So, this is really just a byte copy into a length-bounded buffer. Let's use
memcpy().

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240221-strncpy-drivers-scsi-libfc-fc_encode-h-v2-1-019a0889c5ca@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:21:23 -05:00
Justin Stitt
e100c01efa scsi: lpfc: Replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.

We expect ae->value_string to be NUL-terminated because there's a comment
that says as much; these attr strings are also used with other string APIs,
further cementing the fact.

Now, the question of whether or not to NUL-pad the destination buffer:
lpfc_fdmi_rprt_defer() initializes vports (all zero-initialized), then we
call lpfc_fdmi_cmd() with each vport and a mask. Then, inside of
lpfc_fdmi_cmd() we check each bit in the mask to invoke the proper
callback. Importantly, the zero-initialized vport is passed in as the
"attr" parameter. Seeing this:
|	struct lpfc_fdmi_attr_string *ae = attr;
... we can tell that ae->value_string is entirely zero-initialized. Due
to this, NUL-padding is _not_ required as it would be redundant.

Considering the above, a suitable replacement is strscpy() [2].

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240226-strncpy-drivers-scsi-lpfc-lpfc_ct-c-v2-1-2df2e46569b9@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:18:52 -05:00
Arnd Bergmann
37126399da scsi: bfa: Fix function pointer type mismatch for state machines
The bfa driver is full of state machines and a generic abstraction layer
for them. This relies on casting function pointers, but that is no longer
allowed when CONFIG_CFI_CLANG is enabled and causes a huge number of
warnings like:

drivers/scsi/bfa/bfad.c:169:3: error: cast from 'void (*)(struct bfad_s *, enum bfad_sm_event)' to 'bfa_sm_t' (aka 'void (*)(void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
                bfa_sm_set_state(bfad, bfad_sm_created);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Rework the mechanism to no longer require the function pointer casts, by
having separate types for each individual state machine. This in turn
requires moving the enum definitions for each state machine into the header
files in order to define the typedef.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240222124433.2046570-2-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:16:48 -05:00
Arnd Bergmann
b69600231f scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
Some callback functions used here take a boolean argument, others take a
status argument. This breaks KCFI type checking, so clang now warns about
the function pointer cast:

drivers/scsi/bfa/bfad_bsg.c:2138:29: error: cast from 'void (*)(void *, enum bfa_status)' to 'bfa_cb_cbfn_t' (aka 'void (*)(void *, enum bfa_boolean)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Assuming the code is actually correct here and the callers always match the
argument types of the callee, rework this to replace the explicit cast with
a union of the two pointer types. This does not change the behavior of the
code, so if something is actually broken here, a larger rework may be
necessary.

Fixes: 37ea0558b8 ("[SCSI] bfa: Added support to collect and reset fcport stats")
Fixes: 3ec4f2c8bf ("[SCSI] bfa: Added support to configure QOS and collect stats.")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240222124433.2046570-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:16:48 -05:00
Simone Weiß
c121b588a5 scsi: bfa: Remove additional unnecessary struct declarations
Commit c3b0d08776 ("scsi: bfa: Remove unnecessary struct declarations")
removed duplicate struct declarations for struct bfa_fcs_s and struct
bfa_fcs_fabric_s.

However, there are further duplications:

 - struct bfad_vf_s is declared in line 165 remove the duplication in line
   834.

 - struct bfad_rport_s is declared in line 394 remove the duplication in
   line 836.

Remove them.

Signed-off-by: Simone Weiß <simone.p.weiss@posteo.com>
Link: https://lore.kernel.org/r/20240217191409.6260-1-simone.p.weiss@posteo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 21:16:33 -05:00
Thomas Huth
221d654494 KVM: selftests: x86: sync_regs_test: Get regs structure before modifying it
The regs structure just accidentally contains the right values
from the previous test in the spot where we want to change rbx.
It's cleaner if we properly initialize the structure here before
using it.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-3-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-26 18:08:36 -08:00
Thomas Huth
e100862856 KVM: selftests: x86: sync_regs_test: Use vcpu_run() where appropriate
In the spots where we are expecting a successful run, we should
use vcpu_run() instead of _vcpu_run() to make sure that the run
did not fail.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-26 18:08:35 -08:00
Ranjan Kumar
ee0017c3ed scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 20:42:50 -05:00
Boqun Feng
3add00be5f Merge branches 'rcu-doc.2024.02.14a', 'rcu-nocb.2024.02.14a', 'rcu-exp.2024.02.14a', 'rcu-tasks.2024.02.26a' and 'rcu-misc.2024.02.14a' into rcu.2024.02.26a 2024-02-26 17:37:25 -08:00
Arnd Bergmann
5cc2da0b60 scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
Doubling the number of PHYs also doubled the stack usage of this function,
exceeding the 32-bit limit of 1024 bytes:

drivers/scsi/mpi3mr/mpi3mr_transport.c: In function 'mpi3mr_refresh_sas_ports':
drivers/scsi/mpi3mr/mpi3mr_transport.c:1818:1: error: the frame size of 1636 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Since the sas_io_unit_pg0 structure is already allocated dynamically, use
the same method here. The size of the allocation can be smaller based on
the actual number of phys now, so use this as an upper bound.

Fixes: cb5b608946 ("scsi: mpi3mr: Increase maximum number of PHYs to 64 from 32")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240123130754.2011469-1-arnd@kernel.org
Tested-by: John Garry <john.g.garry@oracle.com> #build only
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-26 20:33:49 -05:00
Pawan Gupta
8009479ee9 x86/bugs: Use fixed addressing for VERW operand
The macro used for MDS mitigation executes VERW with relative
addressing for the operand. This was necessary in earlier versions of
the series. Now it is unnecessary and creates a problem for backports
on older kernels that don't support relocations in alternatives.
Relocation support was added by commit 270a69c448 ("x86/alternative:
Support relocations in alternatives").  Also asm for fixed addressing
is much cleaner than relative RIP addressing.

Simplify the asm by using fixed addressing for VERW operand.

[ dhansen: tweak changelog ]

Closes: https://lore.kernel.org/lkml/20558f89-299b-472e-9a96-171403a83bd6@suse.com/
Fixes: baf8361e54 ("x86/bugs: Add asm helpers for executing VERW")
Reported-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240226-verw-arg-fix-v1-1-7b37ee6fd57d%40linux.intel.com
2024-02-26 17:06:17 -08:00
Jarkko Nikula
197ecadad8 i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
I got an idea the i2c-designware should not need duplicated state
machines for the interrupt and polling modes. The IP is practically the
same and state transitions happens in response to the events that can be
observed from the DW_IC_RAW_INTR_STAT register. Either by interrupts or
by polling.

Another reasons are the interrupt mode is the most tested, has handling
for special cases as well as transmit abort handling and those are
missing from two polling mode quirks.

Patch implements a generic polling mode by using existing code for
interrupt mode. This is done by moving event handling from the
i2c_dw_isr() into a new i2c_dw_process_transfer() that will be called
both from the i2c_dw_isr() and a polling loop.

Polling loop is implemented in a new i2c_dw_wait_transfer() that is
shared between both modes. In interrupt mode it waits for the completion
object as before. In polling mode both completion object and
DW_IC_RAW_INTR_STAT are polled to determine completed transfer and state
transitions.

Loop tries to save power by sleeping "stetson guessed" range between
3 and 25 µS which falls between 10 cycles of High-speed mode 3.4 Mb/s
and Fast mode 400 kHz. With it the CPU usage was reduced under heavy
Fast mode I2C transfer without much increase in total transfer time but
otherwise no more effort has been put to optimize this.

I decided to convert the txgbe_i2c_dw_xfer_quirk() straight to generic
polling mode code in this patch. It doesn't have HW dependent quirks
like the amd_i2c_dw_xfer_quirk() does have and without users this patch
is needless.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:35 +01:00
Jarkko Nikula
c94612a72a i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It
must be at least 1 since code is able to read received data from the
DW_IC_DATA_CMD register.

For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk()
doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but
is needed when converting code into generic polling mode implementation.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:34 +01:00
Jarkko Nikula
bd002efaa1 i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
Code is more logically arranged when i2c_dw_read_clear_intrbits() and
i2c_dw_isr() are located before i2c_dw_xfer().

Real reason for this is to prepare for more shared code between
interrupt and polling mode code.

While at it, remove one extra space and refer to the
i2c_dw_init_master() in two comment sections.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:34 +01:00
Jarkko Nikula
04c71da4a9 i2c: designware: Use accessors to DW_IC_INTR_MASK register
Convert access to DW_IC_INTR_MASK register using the existing
__i2c_dw_write_intr_mask() and a __i2c_dw_read_intr_mask() introduced
here. Motivation to this is to prepare for generic polling mode code
where polling mode will use a SW mask instead of DW_IC_INTR_MASK.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:33 +01:00
Jarkko Nikula
64b6426a6e i2c: designware: Do not enable interrupts shortly in polling mode
I was testing the polling mode txgbe_i2c_dw_xfer_quirk() on a HW where
the i2c-designware has interrupt connected and shared with other device.
I noticed there is a bogus interrupt for each transfer.

Reason for this that both polling mode functions call the
i2c_dw_xfer_init() which enable interrupts then followed by immediate
disable by the same polling mode functions. This is enough to trigger
TX_EMPTY interrupt.

Fix this by introducing a __i2c_dw_write_intr_mask() helper that unmasks
interrupts conditionally and use it in i2c_dw_xfer_init().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:32 +01:00
Jarkko Nikula
535677e44d i2c: designware: Uniform initialization flow for polling mode
Currently initialization flow in i2c_dw_probe_master() skips a few steps
and has code duplication for polling mode implementation.

Simplify this by adding a new ACCESS_POLLING flag that is set for those
two platforms that currently use polling mode and use it to skip
interrupt handler setup.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:51:32 +01:00
Varshini Rajendran
a856c9e610 dt-bindings: i2c: at91: Add sam9x7 compatible string
Add compatible string for sam9x7.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:34:51 +01:00
Peng Fan
2a8d18cd63 dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
Add i.MX95 LPI2C compatible entry, same as i.MX93 compatible
with i.MX7ULP.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-27 01:33:25 +01:00
Hsiao Chien Sung
5306b3fe57 drm/mediatek: Filter modes according to hardware capability
We found a stability issue on MT8188 when connecting an external monitor
in 2560x1440@144Hz mode. Checked with the designer, there is a function
called "prefetch" which is working during VBP (triggered by VSYNC).
If the duration of VBP is too short, the throughput requirement could
increase more than 3 times and lead to stability issues.

The mode settings that VDOSYS supports are mainly affected by clock
rate and throughput, display driver should filter these settings
according to the SoC's limitation to avoid unstable conditions.

Since currently the mode filter is only available on MT8195 and MT8188
and they share the same compatible name, the reference number (8250)
is hard coded instead of in the driver data.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240220093711.20546-2-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-02-27 00:02:55 +00:00
Like Xu
812d432373 KVM: x86/pmu: Explicitly check NMI from guest to reducee false positives
Explicitly check that the source of external interrupt is indeed an NMI
in kvm_arch_pmi_in_guest(), which reduces perf-kvm false positive samples
(host samples labelled as guest samples) generated by perf/core NMI mode
if an NMI arrives after VM-Exit, but before kvm_after_interrupt():

 # test: perf-record + cpu-cycles:HP (which collects host-only precise samples)
 # Symbol                                   Overhead       sys       usr  guest sys  guest usr
 # .......................................  ........  ........  ........  .........  .........
 #
 # Before:
   [g] entry_SYSCALL_64                       24.63%     0.00%     0.00%     24.63%      0.00%
   [g] syscall_return_via_sysret              23.23%     0.00%     0.00%     23.23%      0.00%
   [g] files_lookup_fd_raw                     6.35%     0.00%     0.00%      6.35%      0.00%
 # After:
   [k] perf_adjust_freq_unthr_context         57.23%    57.23%     0.00%      0.00%      0.00%
   [k] __vmx_vcpu_run                          4.09%     4.09%     0.00%      0.00%      0.00%
   [k] vmx_update_host_rsp                     3.17%     3.17%     0.00%      0.00%      0.00%

In the above case, perf records the samples labelled '[g]', the RIPs behind
the weird samples are actually being queried by perf_instruction_pointer()
after determining whether it's in GUEST state or not, and here's the issue:

If VM-Exit is caused by a non-NMI interrupt (such as hrtimer_interrupt) and
at least one PMU counter is enabled on host, the kvm_arch_pmi_in_guest()
will remain true (KVM_HANDLING_IRQ is set) until kvm_before_interrupt().

During this window, if a PMI occurs on host (since the KVM instructions on
host are being executed), the control flow, with the help of the host NMI
context, will be transferred to perf/core to generate performance samples,
thus perf_instruction_pointer() and perf_guest_get_ip() is called.

Since kvm_arch_pmi_in_guest() only checks if there is an interrupt, it may
cause perf/core to mistakenly assume that the source RIP of the host NMI
belongs to the guest world and use perf_guest_get_ip() to get the RIP of
a vCPU that has already exited by a non-NMI interrupt.

Error samples are recorded and presented to the end-user via perf-report.
Such false positive samples could be eliminated by explicitly determining
if the exit reason is KVM_HANDLING_NMI.

Note that when VM-exit is indeed triggered by PMI and before HANDLING_NMI
is cleared, it's also still possible that another PMI is generated on host.
Also for perf/core timer mode, the false positives are still possible since
those non-NMI sources of interrupts are not always being used by perf/core.

For events that are host-only, perf/core can and should eliminate false
positives by checking event->attr.exclude_guest, i.e. events that are
configured to exclude KVM guests should never fire in the guest.

Events that are configured to count host and guest are trickier, perhaps
impossible to handle with 100% accuracy?  And regardless of what accuracy
is provided by perf/core, improving KVM's accuracy is cheap and easy, with
no real downsides.

Fixes: dd60d21706 ("KVM: x86: Fix perf timer mode IP reporting")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231206032054.55070-1-likexu@tencent.com
[sean: massage changelog, squash !!in_nmi() fixup from Like]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-26 15:57:22 -08:00
Kees Cook
44c76825d6 x86: Increase brk randomness entropy for 64-bit systems
In commit c1d171a002 ("x86: randomize brk"), arch_randomize_brk() was
defined to use a 32MB range (13 bits of entropy), but was never increased
when moving to 64-bit. The default arch_randomize_brk() uses 32MB for
32-bit tasks, and 1GB (18 bits of entropy) for 64-bit tasks.

Update x86_64 to match the entropy used by arm64 and other 64-bit
architectures.

Reported-by: y0un9n132@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jiri Kosina <jkosina@suse.com>
Closes: https://lore.kernel.org/linux-hardening/CA+2EKTVLvc8hDZc+2Yhwmus=dzOUG5E4gV7ayCbu0MPJTZzWkw@mail.gmail.com/
Link: https://lore.kernel.org/r/20240217062545.1631668-1-keescook@chromium.org
2024-02-27 00:23:55 +01:00
Daniel Micay
3c6539b4c1 x86/vdso: Move vDSO to mmap region
The vDSO (and its initial randomization) was introduced in commit 2aae950b21
("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu"), but
had very low entropy. The entropy was improved in commit 394f56fe48
("x86_64, vdso: Fix the vdso address randomization algorithm"), but there
is still improvement to be made.

In principle there should not be executable code at a low entropy offset
from the stack, since the stack and executable code having separate
randomization is part of what makes ASLR stronger.

Remove the only executable code near the stack region and give the vDSO
the same randomized base as other mmap mappings including the linker
and other shared objects. This results in higher entropy being provided
and there's little to no advantage in separating this from the existing
executable code there. This is already how other architectures like
arm64 handle the vDSO.

As an side, while it's sensible for userspace to reserve the initial mmap
base as a region for executable code with a random gap for other mmap
allocations, along with providing randomization within that region, there
isn't much the kernel can do to help due to how dynamic linkers load the
shared objects.

This was extracted from the PaX RANDMMAP feature.

[kees: updated commit log with historical details and other tweaks]

Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://github.com/KSPP/linux/issues/280
Link: https://lore.kernel.org/r/20240210091827.work.233-kees@kernel.org
2024-02-27 00:23:55 +01:00
Breno Leitao
d54e56f31a x86/nmi: Fix the inverse "in NMI handler" check
Commit 344da544f1 ("x86/nmi: Print reasons why backtrace NMIs are
ignored") creates a super nice framework to diagnose NMIs.

Every time nmi_exc() is called, it increments a per_cpu counter
(nsp->idt_nmi_seq). At its exit, it also increments the same counter.  By
reading this counter it can be seen how many times that function was called
(dividing by 2), and, if the function is still being executed, by checking
the idt_nmi_seq's least significant bit.

On the check side (nmi_backtrace_stall_check()), that variable is queried
to check if the NMI is still being executed, but, there is a mistake in the
bitwise operation. That code wants to check if the least significant bit of
the idt_nmi_seq is set or not, but does the opposite, and checks for all
the other bits, which will always be true after the first exc_nmi()
executed successfully.

This appends the misleading string to the dump "(CPU currently in NMI
handler function)"

Fix it by checking the least significant bit, and if it is set, append the
string.

Fixes: 344da544f1 ("x86/nmi: Print reasons why backtrace NMIs are ignored")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207165237.1048837-1-leitao@debian.org
2024-02-26 23:41:30 +01:00
Anna-Maria Behnsen
8b3843ae36 vdso/datapage: Quick fix - use asm/page-def.h for ARM64
The vdso rework for the generic union vdso_data_store broke compat VDSO on
arm64:

In file included from arch/arm64/include/asm/lse.h:5,
		 from arch/arm64/include/asm/cmpxchg.h:14,
		 from arch/arm64/include/asm/atomic.h:16,
		 from include/linux/atomic.h:7,
		 from include/asm-generic/bitops/atomic.h:5,
		 from arch/arm64/include/asm/bitops.h:25,
		 from include/linux/bitops.h:68,
		 from arch/arm64/include/asm/memory.h:209,
		 from arch/arm64/include/asm/page.h:46,
		 from include/vdso/datapage.h:22,
		 from lib/vdso/gettimeofday.c:5,
		 from <command-line>:
arch/arm64/include/asm/atomic_ll_sc.h:298:9: error: unknown type name 'u128'
  298 |         u128 full;
      |         ^~~~
arch/arm64/include/asm/atomic_ll_sc.h:305:24: error: unknown type name 'u128'
  305 | static __always_inline u128
	 \
      |

The reason is the include of asm/page.h which in turn includes headers
which are outside the scope of compat VDSO. The only reason for the
asm/page.h include is the required definition of PAGE_SIZE. But as arm64
defines PAGE_SIZE in asm/page-def.h without extra header includes, this
could be used instead.

Caution: this is a quick fix only! The final fix is an upcoming cleanup of
Arnd which consolidates PAGE_SIZE definition. After the cleanup, the
include of asm/page.h to access PAGE_SIZE is no longer required.

Fixes: a0d2fcd62a ("vdso/ARM: Make union vdso_data_store available for all architectures")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226175023.56679-1-anna-maria@linutronix.de
Link: https://lore.kernel.org/lkml/CA+G9fYtrXXm_KO9fNPz3XaRxHV7UD_yQp-TEuPQrNRHU+_0W_Q@mail.gmail.com/
2024-02-26 23:13:41 +01:00
Heming Zhao
ecbd8ebb51 md/md-bitmap: fix incorrect usage for sb_index
Commit d7038f9518 ("md-bitmap: don't use ->index for pages backing the
bitmap file") removed page->index from bitmap code, but left wrong code
logic for clustered-md. current code never set slot offset for cluster
nodes, will sometimes cause crash in clustered env.

Call trace (partly):
 md_bitmap_file_set_bit+0x110/0x1d8 [md_mod]
 md_bitmap_startwrite+0x13c/0x240 [md_mod]
 raid1_make_request+0x6b0/0x1c08 [raid1]
 md_handle_request+0x1dc/0x368 [md_mod]
 md_submit_bio+0x80/0xf8 [md_mod]
 __submit_bio+0x178/0x300
 submit_bio_noacct_nocheck+0x11c/0x338
 submit_bio_noacct+0x134/0x614
 submit_bio+0x28/0xdc
 submit_bh_wbc+0x130/0x1cc
 submit_bh+0x1c/0x28

Fixes: d7038f9518 ("md-bitmap: don't use ->index for pages backing the bitmap file")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240223121128.28985-1-heming.zhao@suse.com
2024-02-26 13:34:44 -08:00
Matthew Brost
e275d61c5f drm/xe/guc: Handle timing out of signaled jobs gracefully
Timing out of signaled jobs can happen during regular operations (e.g.
an exec queue closed immediately after last fence signaled). The TDR can
pass the worker which free jobs. Rather than running through the TDR if
signaled job is found, simply free it without any debug messages.

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1271
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223204659.40750-1-matthew.brost@intel.com
2024-02-26 13:07:18 -08:00
Jason Gunthorpe
bb04d13353 iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
Since MOCK_HUGE_PAGE_SIZE was introduced it allows the core code to invoke
mock with large page sizes. This confuses the validation logic that checks
that map/unmap are paired.

This is because the page size computed for map is based on the physical
address and in many cases will always be the base page size, however the
entire range generated by iommufd will be passed to map.

Randomly iommufd can see small groups of physically contiguous pages,
(say 8k unaligned and grouped together), but that group crosses a huge
page boundary. The map side will observe this as a contiguous run and mark
it accordingly, but there is a chance the unmap side will end up
terminating interior huge pages in the middle of that group and trigger a
validation failure. Meaning the validation only works if the core code
passes the iova/length directly from iommufd to mock.

syzkaller randomly hits this with failures like:

  WARNING: CPU: 0 PID: 11568 at drivers/iommu/iommufd/selftest.c:461 mock_domain_unmap_pages+0x1c0/0x250
  Modules linked in:
  CPU: 0 PID: 11568 Comm: syz-executor.0 Not tainted 6.8.0-rc3+ #4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  RIP: 0010:mock_domain_unmap_pages+0x1c0/0x250
  Code: 2b e8 94 37 0f ff 48 d1 eb 31 ff 48 b8 00 00 00 00 00 00 20 00 48 21 c3 48 89 de e8 aa 32 0f ff 48 85 db 75 07 e8 70 37 0f ff <0f> 0b e8 69 37 0f ff 31 f6 31 ff e8 90 32 0f ff e8 5b 37 0f ff 4c
  RSP: 0018:ffff88800e707490 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff822dfae6
  RDX: ffff88800cf86400 RSI: ffffffff822dfaf0 RDI: 0000000000000007
  RBP: ffff88800e7074d8 R08: 0000000000000000 R09: ffffed1001167c90
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000001500000
  R13: 0000000000083000 R14: 0000000000000001 R15: 0000000000000800
  FS:  0000555556048480(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000001b2dc23000 CR3: 0000000008cbb000 CR4: 0000000000350eb0
  Call Trace:
   <TASK>
   __iommu_unmap+0x281/0x520
   iommu_unmap+0xc9/0x180
   iopt_area_unmap_domain_range+0x1b1/0x290
   iopt_area_unpin_domain+0x590/0x800
   __iopt_area_unfill_domain+0x22e/0x650
   iopt_area_unfill_domain+0x47/0x60
   iopt_unfill_domain+0x187/0x590
   iopt_table_remove_domain+0x267/0x2d0
   iommufd_hwpt_paging_destroy+0x1f1/0x370
   iommufd_object_remove+0x2a3/0x490
   iommufd_device_detach+0x23a/0x2c0
   iommufd_selftest_destroy+0x7a/0xf0
   iommufd_fops_release+0x1d3/0x340
   __fput+0x272/0xb50
   __fput_sync+0x4b/0x60
   __x64_sys_close+0x8b/0x110
   do_syscall_64+0x71/0x140
   entry_SYSCALL_64_after_hwframe+0x46/0x4e

Do the simple thing and just disable the validation when the huge page
tests are being run.

Fixes: 7db521e23f ("iommufd/selftest: Hugepage mock domain support")
Link: https://lore.kernel.org/r/0-v1-1e17e60a5c8a+103fb-iommufd_mock_hugepg_jgg@nvidia.com
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-02-26 16:59:12 -04:00
Nicolin Chen
cf7c278982 iommufd: Fix protection fault in iommufd_test_syz_conv_iova
Syzkaller reported the following bug:

  general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN
  KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
  Call Trace:
   lock_acquire
   lock_acquire+0x1ce/0x4f0
   down_read+0x93/0x4a0
   iommufd_test_syz_conv_iova+0x56/0x1f0
   iommufd_test_access_rw.isra.0+0x2ec/0x390
   iommufd_test+0x1058/0x1e30
   iommufd_fops_ioctl+0x381/0x510
   vfs_ioctl
   __do_sys_ioctl
   __se_sys_ioctl
   __x64_sys_ioctl+0x170/0x1e0
   do_syscall_x64
   do_syscall_64+0x71/0x140

This is because the new iommufd_access_change_ioas() sets access->ioas to
NULL during its process, so the lock might be gone in a concurrent racing
context.

Fix this by doing the same access->ioas sanity as iommufd_access_rw() and
iommufd_access_pin_pages() functions do.

Cc: stable@vger.kernel.org
Fixes: 9227da7816 ("iommufd: Add iommufd_access_change_ioas(_id) helpers")
Link: https://lore.kernel.org/r/3f1932acaf1dd494d404c04364d73ce8f57f3e5e.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-02-26 16:58:11 -04:00