This patch fixes memory leaks on error escapes in function fake_get_pages
Fixes: c3bfba9a22 ("drm/i915: Check for integer truncation on scatterlist creation")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414224109.1051922-1-andi.shyti@linux.intel.com
Add a constant IO_NOTIF_UBUF_FLAGS for struct ubuf_info flags that
notifications use. That should minimise merge conflicts for planned
changes touching both io_uring and net at the same time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A few more changes. Some were dependent on fixes that are now upstream
and in char-misc-next.
st,lsm6dsx:
- Add an ACPI ID (SMO8B30) and mount matrix (ROTM) seen in the wild.
ti,palmas
- Take probe fully devm managed.
- Add threshold event support (after some rework)
- Stop changing the event config on suspend and resume.
-----BEGIN PGP SIGNATURE-----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=uoX5
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO features and cleanups for the 6.4 cycle.
A few more changes. Some were dependent on fixes that are now upstream
and in char-misc-next.
st,lsm6dsx:
- Add an ACPI ID (SMO8B30) and mount matrix (ROTM) seen in the wild.
ti,palmas
- Take probe fully devm managed.
- Add threshold event support (after some rework)
- Stop changing the event config on suspend and resume.
* tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: palmas: don't alter event config on suspend/resume
iio: adc: palmas: add support for iio threshold events
iio: adc: palmas: always reset events on unload
iio: adc: palmas: move eventX_enable into palmas_adc_event
iio: adc: palmas: use iio_event_direction for threshold polarity
iio: adc: palmas: replace "wakeup" with "event"
iio: adc: palmas: remove adc_wakeupX_data
iio: adc: palmas: Take probe fully device managed.
iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
One small fix to SCSI Enclosure Services to fix a regression caused by
another recent fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZDqyfiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZAiAQCtjwkq
7ZGxoyEI6LCHLx60UXhlwFRyDZ2gooSkjTt34gEA5timHhFNnF4/dgQbRn7EfYRs
lUlUK+4t6zJ23VtjYhg=
=Ze4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One small fix to SCSI Enclosure Services to fix a regression caused by
another recent fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ses: Handle enclosure with just a primary component gracefully
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmQ6HP4QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpiuxD/wMRoH/NfgJy1QsnXaelZihWeKx7ywsFiwd
0EXmNClOae0Lwvn6wmIYYsBCIeK7Np0WAhAQzpfxPBPr8twnV0ZIpSMIBUjFyt01
u0LEeYA/Sjy7WRKAd2SFHiEREM45Vxvp3suaw1gGNhanfL5FfnwmGO+GTY9tIAzz
P5QEhA7kOho/rfx/4L0gze1K2hGFkd1C8ezJq5KRZd2EMUT45UIhHNoOwQaM7DHQ
GWRoVCFREMdA+xyOZ+4xTWXrd3R3ptE02b5vIwCw+y4hNxQHUaLWlu427zlL4ozb
QR7i6y1wtVDiTfBiuBY36qX6Ne84aAsNWqaRvwmcCl0VfGsQOpHtjs4eQWYVLeUB
3+7tUgGtXaBWMB9hCoOsnuQq2m7vuV56ECgufvpKUaoz9KUuAaWo3MgB157ORME3
+Va9R7HhjNtUpP1tPS5w6ljTRWngVcp8rdwWt+2mrlsmFQlqjppl5fOBTPqIA6+k
WVj+0S9pJXHAEveFeJ3SqyjQfDuPw1o9mxinczNle/gKaFqjX2tQfmQgNATgiIDD
kNSW3Bccw7LWKTScklzMtyowMLoonrfveqqH3QKmVm5K+zFEULWfZqFNlVoqGrYi
qF4pCEIPF/FxrpEvQP1Bp04ZH4qJpGrjuhhJke4kjB9DGRDv6T6m8EzKWkWuFlDH
i18gYxJG/w==
=pzRD
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a small tweak to when task_work needs redirection, marked for
stable as well"
* tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux:
io_uring: complete request via task work in case of DEFER_TASKRUN
The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The inputs to the ISI go through Pixel Link
interfaces, and their number and nature is SoC-dependent. They cover
both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add blank lines as reported by checkpatch.pl as below
CHECK: Please use a blank line after function/struct/union/enum declarations
Signed-off-by: Srihari S <sriharisat@gmail.com>
Link: https://lore.kernel.org/r/1680966983-11609-1-git-send-email-sriharisat@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for hardware RTL8192SE is done in function _rtl92e_pci_probe()
directly and also two lines later in function rtl92e_check_adapter().
Remove top level check to increase readability.
This pci_read does not follow a pci_write to ensure data is written to
the device.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4126cca73739c75b1a0379af2ef8b0c63a705639.1680902603.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The greybus loopback test tool does not belong burried down in a
driver-specific directory. If it is needed, it should be somewhere
else, like in the testing directory. But as the loopback driver is
probably never going to be merged out of the staging directory, let's
just delete the test alltogether for now. If it's needed in the future,
it can be brought back with a revert.
Also, having an Android.mk file in the kernel source tree breaks some
Android build systems when trying to build from a read-only source tree,
the report of which prompted this being a good reason to remove it as
well.
Cc: Johan Hovold <johan@kernel.org>
Cc: Jack Schofield <schofija@oregonstate.edu>
Cc: Vaibhav Nagare <vnagare@redhat.com>
Cc: greybus-dev@lists.linaro.org
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/2023040613-huntsman-goldsmith-4a41@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _DSM used to get sensor variables like CsiPort returns the wrong
csi-port for the front OV2680 sensor on the Lenovo Ideapad Miix 310
add a gmin_vars DMI quirk / override setting the right CsiPort.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
On some devices the _DSM sensor-info table contains wrong info,
move the DMI quirk handling up to above the _DSM table check
to allow DMI quirks to override wrong info in the _DSM table.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the struct atomisp_sub_device.
This was used for 2 things:
1. In dev_dbg() messages
2. To set the name of the v4l2_subdev for each struct atomisp_sub_device
Now that only 1 subdev is used neither is useful anymore. Remove the _%d
postfix from the v4l2_subdev name and remove the logging of the asd index
from the dev_dbg() messages.
In case of the atomisp_s_input() check to see if an input/sensor has
already been assigned to another subdev the entire check no longer
makes sense, so instead of changing the dev_err() message there just
drop the entire check.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With support for depth mode gone there really is no need to support
streaming from 2 sensors at once. As discussed and acked on the list
(see Link tag) it is desirable to drop support for this since it
involves quite a lot of special handling / hacks in the code.
This initial commit limits itself to a minimum set of changes to switch
to 1 struct atomisp_sub_device / 1 stream. Further commits will actually
remove / cleanup much of the special handling.
Likewise this initial commit also deliberately skips the opportunity to
turn some multi-line statements into single-line statements, so as to
keep the diff small / easier to review.
Link: https://lore.kernel.org/linux-media/5309d845-063b-6dd9-529d-0f82654290f2@redhat.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_set_fmt() first calls:
v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
pad, set_fmt, ...);
with v4l2_subdev_format.which set to V4L2_SUBDEV_FORMAT_ACTIVE and then
reduces width + height by padding_w / padding_h followed by calling
atomisp_try_fmt() which then sets res_overflow if the requested resolution
is larger then the sensor's max resolution, but that will never happen
since we are requesting for the result of a set_fmt call minus padding,
so res_overflow will always be false.
And when called with a res_overflow parameter, combined with there
being no overflow then atomisp_try_fmt() does not change the passed
in width/height.
Except when using JPEG or CUSTOM_M10MO_RAW as pixelformat, then
atomisp_try_fmt() does change the width/height but in that case
atomisp_set_fmt actually restores the old widht/height which it
has saved before the atomisp_try_fmt() call. So this too is a no-op.
TL;DR: The atomisp_try_fmt() call in atomisp_set_fmt() is a no-op,
remove it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
defines.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
snr_mbus_fmt is a local variable pointing to a substruct of another local
variable which really just makes the code harder to read / follow,
so drop it.
And likewise also drop the stream_info local variable.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The custom V4L2_CID_FMT_AUTO control, which defaults to true
controls whether the atomisp driver will automatically configure
the sensor and ISP settings to match.
This is necessary to make normal v4l2 apps to work. We do eventually
want to add libcamera support, but even then moving this to userspace
does not give any added value, while breaking classic v4l2 apps.
Moreover we really don't know all the exact pipeline constraints,
so moving this to userspace/libcamera will be tricky thus it is best
to keep the current in kernel code for this and make the kernel
unconditionally do this.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove code to check / adjust code between video and preview /
capture and view-finder nodes now that we no longer support
continuous mode and this no longer support streaming from 2
/dev/video# nodes at the same time.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_ioctl.h contains the atomisp_[start|stop]_streaming() function
prototypes 2 times. Drop one of the copies of the prototypes.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The DSDT of all Windows BYT / CHT devices which I have seen has proper
ACPI powermagement for the clk and regulators used by the sensors.
So there is no need for the whole custom atomisp_gmin custom code to
disable the ACPI pm and directly poke at the PMIC for this.
Replace all the atomisp_gmin usage with using the new
atomisp_register_sensor_no_gmin() / atomisp_unregister_subdev()
helpers which allow registering a sensor with the atomisp code
without using any of the atomisp_gmin power-management code.
Note eventually these calls should be replaced by the standard
v4l2_async_register_subdev_sensor() mechanism.
But this first requires a bunch of work to the atomisp main code
to make it set the necessary fwnodes up, similar to how
drivers/media/pci/intel/ipu3/cio2-bridge.c does this.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use devm_kzalloc() to allocate the data struct. It is always free-ed as
the last step of probe-error-exit or remove, so it can be devm-managed.
This will make unwinding things easier when support is added to the gc0310
code to use standard GPIO APIs instead of the custom atomisp_gmin code.
This also allows dropping the out_free label and use direct return
on errors.
This may seem like a functional change since the out_free label also
did a v4l2_device_unregister_subdev() but at the 1 changed return
the device is not registered yet, so that always is a no-op and can
be dropped.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add runtime-pm support. This is a preparation patch for letting
ACPI deal with the regulators and clocks instead of the DIY code
in atomisp_gmin_platform.c.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move the setting of the mode to stream on, this also allows
delaying power-on till streaming is started.
And drop the deprecated s_power callback since this now no long
is necessary.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There only is 1 supported resolution allowing significant simplification
of the code; and also bring the code up2date with current subdev fmt
handling practices.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add error_unlock label + goto error_unlock on error to remove separate
unlock-s in all the error-exit paths.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add exposure and gain controls. This allows controlling
the exposure and gain through standard v4l2 IOCTLs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Exposure and gain control should use standard v4l2 controls,
not a custom ioctl.
The next patch in this series will re-add support as standard controls,
this is split into 2 patches for easier reviewing.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sensor does not have automatic exposure so the exposure cannot
change underneath us.
And the control is not marked volatile in it flags,
so the .g_volatile_ctrl callback will never get called.
Remove the current broken read-only (no s_ctrl implementation)
exposure ctrl, this will be replaced with a proper r/w exposure
control relying on the kernel caching the last set value
(so non volatile).
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The gc0310_[v|h]_flip() functions are empty stubs, remove
the non working controls.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The gc0310 uses 8 bit register addresses which makes it compatible
with the standard smbus access functions.
Drop the custom reg access helpers, replacing them with the smbus
access functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
enum gc0310_tok_type / the data_length read/write parameter
is always GC0310_8BIT, drop this.
Note for the register-lists the indentation is also fixed and
c++ style comments are converted to regular C-style /* */ comments.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the complex optimization to send multiple registers in
one i2c-transfer. None of the other sensor drivers are doing this
and the reg-lists are only used once at stream-start time, so
this does not need to be highly optimized.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the ability to have special tokens in a reg-list,
GC0310_TOK_DELAY is not used and GC0310_TOK_TERM can be replaced
with ARRAY_SIZE, simplifying the code.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop the unused struct gc0310_format and struct regval_list definitions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix 3 error handling issues:
1. In ov2680_s_stream(), when pm_runtime_get_sync() fails it will still
have incremented the pm-runtime reference count so we need to call
pm_runtime_put()
2. In ov2680_s_stream() sensor->is_streaming should always be set to false
when the sensor is powered-off even on i2c-communication errors.
3. In ov2680_probe(), call ov2680_remove() on ov2680_s_config() errors,
so that pm_runtime_disable() is properly called to disable the
runtime-pm which has been enabled before the ov2680_s_config() call.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the new v4l2_get_acpi_sensor_info() for the GPIO lookups,
this uses the special Intel _DSM method to get more info about
the GPIOs like their function and their polarity.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ACPI nodes describing sensors on atomisp devices implement a
"79234640-9e10-4fea-a5c1-b5aa8b19756f" Device Specific Method (DSM)
to get info about the GPIOs.
Using this method is necessary to figure out which ACPI GPIO resource
is "reset" and which one is "powerdown" and this is also necessary to
figure out the correct polarity of the pins.
One example where this is necessary is the GC0310 sensor. The current
GC0310 code hardcodes reset as being active-low and power-down as being
active-high. This works on a number of devices such as the mpman
converter 9. But it is wrong for the Chuwi Vi8 CWI501 where the powerdown
pin is active-low.
Rather then adding DMI quirks for this, add a helper for this,
which can be shared between sensor-drivers. This new helper optionally
also returns a string identifying the exact sensor-module used, which
might be useful if any module specific behvior is necessary in the sensor
driver.
This uses the DSM directly on the sensor device's ACPI node. This is
different from later Intel hardware (IPU3 / IPU6) which has a separate
INT3472 node (with its own driver) with this info.
Since there is no separate ACPI node to which we can bind to register GPIO
lookups, this unfortunately means that all sensor drivers which may be used
on BYT or CHT hw need to call this new helper.
Note for now this function is being added to atomisp_gmin_platform.c,
but once things are ready to move atomisp over to using generic sensor
drivers this will need to become a generic v4l2 sensor helper. but this
will require upstream discussion first.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
(patch based on intel-aero kernel patch:
26fc9fe503)
Here is the original commit message from the aforementioned patch:
From 26fc9fe5030b63bc9dcf0b5f32981948911ca272 Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.demarchi@intel.com>
Date: Fri, 7 Jul 2017 14:23:53 -0700
Subject: [PATCH] linux-yocto: Remove remaining instance of call to
trace_printk
It's not sufficient to leave trace_printk() out of "normal call chains" since
the way trace infrastructure works is that it will allocate the trace_printk
buffers if the symbol is there (by using a separate section for the function
and checking if __start_* and __stop_* symbols are different.
Therefore, even if the default value for the param tells the module to use
printk(), just the fact that it can be changed to trace_printk() means the
initialization code will be called.
The trace_printk() was replaced by pr_info() on commit 3d81099c75
("media: atomisp: Replace trace_printk by pr_info") for the upstreamed
atomisp, too. However, as the aforementioned commit message says, there
is still a remaining instance. This causes the "trace_printk() being
used" kernel warning message to still appear on the first driver load.
Based on the aforementioned patch, this patch removes the call to
ftrace_vprintk(). This removes that kernel warning.
In addition to this, this patch also removes the following now unused
things:
- now empty atomisp_css2_dbg_ftrace_print()
- trace_printk option from dbg_func kernel parameter
Link: https://lore.kernel.org/r/20211017161958.44351-15-kitakar@gmail.com
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
online_process is always true, remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-11-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
yuvpp_mode is never set, so it always is false remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-10-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ATOMISP_USE_YUVPP() always returns false, so remove it and remove any
code-paths which only run when it would return true.
Link: https://lore.kernel.org/r/20230221145906.8113-9-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nothing registers subdevs with the SOC_CAMERA, XENON_FLASH and FILE_INPUT
types, remove the code for these.
Link: https://lore.kernel.org/r/20230221145906.8113-8-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_get_metadata_type() always returns ATOMISP_MAIN_METADATA,
replace its uses with ATOMISP_MAIN_METADATA and remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-7-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the now unused atomisp_css_enable_raw_binning() function.
Link: https://lore.kernel.org/r/20230221145906.8113-6-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the crop_needs_override local helper variable from
atomisp_set_fmt(), as it always is true now.
Link: https://lore.kernel.org/r/20230221145906.8113-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
