The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Exiting early in remove without releasing all acquired resources yields
leaks. Note that e.g. memory allocated with devm_zalloc() is freed after
.remove() returns, even if the return code was negative.
While blocking_notifier_chain_unregister() won't fail and so the
change is somewhat cosmetic, platform driver's .remove callbacks are
about to be converted to return void. To prepare that, keep the error
message but don't return early.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert the WM8711 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230405205820.6836-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8580 and WM8581 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230405205025.6448-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is an oversight from dc5bdb68b5 ("drm/fb-helper: Fix vt
restore") - I failed to realize that nasty userspace could set this.
It's not pretty to mix up kernel-internal and userspace uapi flags
like this, but since the entire fb_var_screeninfo structure is uapi
we'd need to either add a new parameter to the ->fb_set_par callback
and fb_set_par() function, which has a _lot_ of users. Or some other
fairly ugly side-channel int fb_info. Neither is a pretty prospect.
Instead just correct the issue at hand by filtering out this
kernel-internal flag in the ioctl handling code.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: dc5bdb68b5 ("drm/fb-helper: Fix vt restore")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404193934.472457-1-daniel.vetter@ffwll.ch
Stolen memory is not usable for MTL A0 stepping beyond
certain access size and we have no control over userspace
access size of /dev/fb which can be backed by stolen memory.
So disable stolen memory backed fb by setting i915->dsm.usable_size
to zero.
v2: remove hsdes reference and fix commit message(Andi)
v3: use revid as we want to target SOC stepping(Radhakrishna)
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404181342.23362-1-nirmoy.das@intel.com
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Merge series from Alexander Sverdlin <alexander.sverdlin@gmail.com>:
This is a preparatory series for EP93xx transition to DT. This patchset is
a pre-requisite and has been tested with the full DT patchset [1].
[1]. git://git.maquefel.me/linux.git branch ep93xx/6.2-rc4-v0
Alexander Sverdlin (3):
ASoC: ep93xx: i2s: move enable call to startup callback
ASoC: cs4271: flat regcache, trivial simplifications
ASoC: ep93xx: i2s: Make it individually selectable
sound/soc/cirrus/Kconfig | 6 +++++-
sound/soc/cirrus/ep93xx-i2s.c | 12 +++++++++++-
sound/soc/codecs/cs4271-i2c.c | 1 -
sound/soc/codecs/cs4271-spi.c | 1 -
sound/soc/codecs/cs4271.c | 4 ++--
5 files changed, 18 insertions(+), 6 deletions(-)
--
2.40.0
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # atmel
Reviewed-by: Paul Cercueil <paul@crapouillou.net> # ingenic
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> # ingenic
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # intel
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # meson
Acked-by: Roger Quadros <rogerq@kernel.org> # omap_elm
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Reviewed-by: Heiko Stuebner <heiko@sntech.de> # rockchip
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sunxi
Acked-by: Thierry Reding <treding@nvidia.com> # tegra
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230411113816.3472237-1-u.kleine-koenig@pengutronix.de
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230407190453.66efdf9d@endymion.delvare
cli.py currently throws a pure KeyError if kernel doesn't support
a netlink family. Users who did not write ynl (hah) may waste
their time investigating what's wrong with the Python code.
Improve the error message:
Traceback (most recent call last):
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 362, in __init__
self.family = GenlFamily(self.yaml['name'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 331, in __init__
self.genl_family = genl_family_name_to_id[family_name]
~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
KeyError: 'netdev'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/kicinski/devel/linux/./tools/net/ynl/cli.py", line 52, in <module>
main()
File "/home/kicinski/devel/linux/./tools/net/ynl/cli.py", line 31, in main
ynl = YnlFamily(args.spec, args.schema)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 364, in __init__
raise Exception(f"Family '{self.yaml['name']}' not supported by the kernel")
Exception: Family 'netdev' not supported by the kernel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230407145609.297525-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On certain SoCs, Interrupt Aggregator may have a power-domain dependency
to be on before accessing. Add DT binding for the same
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230407045111.531107-1-vigneshr@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
When building with W=1 after commit 80b6093b55 ("kbuild: add -Wundef
to KBUILD_CPPFLAGS for W=1 builds"), the following warning occurs.
In file included from arch/powerpc/kvm/bookehv_interrupts.S:26:
arch/powerpc/kvm/../kernel/head_booke.h:20:6: warning: "THREAD_SHIFT" is not defined, evaluates to 0 [-Wundef]
20 | #if (THREAD_SHIFT < 15)
| ^~~~~~~~~~~~
THREAD_SHIFT is defined in thread_info.h but it is not directly included
in head_booke.h, so it is possible for THREAD_SHIFT to be undefined. Add
the include to ensure that THREAD_SHIFT is always defined.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202304050954.yskLdczH-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406-wundef-thread_shift_booke-v1-1-8deffa4d84f9@kernel.org
syscalls do not set the PPR field in their interrupt frame and
return from syscall always sets the default PPR for userspace,
so setting the value in the ret_from_fork frame is not necessary
and mildly inconsistent. Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-9-npiggin@gmail.com
In the kernel user thread path, don't set _TIF_RESTOREALL because
the thread is required to call kernel_execve() before it returns,
which will set _TIF_RESTOREALL if necessary via start_thread().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-8-npiggin@gmail.com
Kernel created user threads start similarly to kernel threads in that
they call a kernel function after first returning from _switch, so
they share ret_from_kernel_thread for this. Kernel threads never return
from that function though, whereas user threads often do (although some
don't, e.g., IO threads).
Split these startup functions in two, and catch kernel threads that
improperly return from their function. This is intended to make the
complicated code a little bit easier to understand.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-7-npiggin@gmail.com
When copy_thread is given a kernel function to run in arg->fn, this
does not necessarily mean it is a kernel thread. User threads can be
created this way (e.g., kernel_init, see also x86's copy_thread()).
These threads run a kernel function which may call kernel_execve()
and return, which returns like a userspace exec(2) syscall.
Kernel threads are to be differentiated with PF_KTHREAD, will always
have arg->fn set, and should never return from that function, instead
calling kthread_exit() to exit.
Create separate paths for the kthread and user kernel thread creation
logic. The kthread path will never exit and does not require a user
interrupt frame, so it gets a minimal stack frame.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-6-npiggin@gmail.com
If the system call return path always restores NVGPRs then there is no
need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the
right thing for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-5-npiggin@gmail.com
The kernel thread path in copy_thread creates a user interrupt frame on
stack and stores the function and arg parameters there, and
ret_from_kernel_thread loads them. This is a slightly confusing way to
overload that frame. Non-volatile registers are loaded from the switch
frame, so the parameters can be stored there. The user interrupt frame
is now only used by user threads when they return to user.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-4-npiggin@gmail.com
The ret_from_fork code for 64e and 32-bit set r3 for
syscall_exit_prepare the same way that 64s does, so there should
be no need to special-case them in copy_thread.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-3-npiggin@gmail.com
The pkey registers (AMR, IAMR) do not get loaded from the switch frame
so it is pointless to save anything there. Remove the dead code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-2-npiggin@gmail.com
The amdgpu driver builds some of its code with hard-float enabled,
whereas the rest of the kernel is built with soft-float.
When building with 64-bit long double, if soft-float and hard-float
objects are linked together, the build fails due to incompatible ABI
tags.
In the past there have been build errors in the amdgpu driver caused by
this, some of those were due to bad intermingling of soft & hard-float
code, but those issues have now all been fixed since commit 58ddbecb14
("drm/amd/display: move remaining FPU code to dml folder").
However it's still possible for soft & hard-float objects to end up
linked together, if the amdgpu driver is built-in to the kernel along
with the test_emulate_step.c code, which uses soft-float. That happens
in an allyesconfig build.
Currently those build errors are avoided because the amdgpu driver is
gated on 128-bit long double being enabled. But that's not a detail the
amdgpu driver should need to be aware of, and if another driver starts
using hard-float the same problem would occur.
All versions of the 64-bit ABI specify that long-double is 128-bits.
However some compilers, notably the kernel.org ones, are built to use
64-bit long double by default.
Apart from this issue of soft vs hard-float, the kernel doesn't care
what size long double is. In particular the kernel using 128-bit long
double doesn't impact userspace's ability to use 64-bit long double, as
musl does.
So always build the 64-bit kernel with 128-bit long double. That should
avoid any build errors due to the incompatible ABI tags. Excluding the
code that uses soft/hard-float, the vmlinux is identical with/without
the flag.
It does mean any code which is incorrectly intermingling soft &
hard-float code will build without error, so those bugs will need to be
caught by testing rather than at build time.
For more background see:
- commit d11219ad53 ("amdgpu: disable powerpc support for the newer display engine")
- commit c653c59178 ("drm/amdgpu: Re-enable DCN for 64-bit powerpc")
- https://lore.kernel.org/r/dab9cbd8-2626-4b99-8098-31fe76397d2d@app.fastmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://msgid.link/20230404102847.3303623-1-mpe@ellerman.id.au
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes: 953e66a723 ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add DTS for Qualcomm qrb4210-rb2 board which uses SM4250 SoC.
This adds debug uart, emmc, uSD and tlmm support along with
regulators found on this board.
Also defines the 'xo_board' and 'sleep_clk' frequencies for
this board.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Squashed separate patch specifying regulator-system-load]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411072840.2751813-3-bhupesh.sharma@linaro.org
Document the Qualcomm qrb4210-rb2 board based on Robotics version
of the Snapdragon SM4250 Soc, i.e. QRB4210.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411072840.2751813-2-bhupesh.sharma@linaro.org
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to merge following patch to drm-intel-gt-next:
https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Extend the existing fan53555 driver to support the Rockchip RK860X
regulators.
RK8600/RK8601 are pretty similar to the FAN53555 regulators.
RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They also use
additional VSEL0/VSEL1 registers for the voltage selector, but the
enable and mode bits are still located in the original FAN53555 specific
VSEL0/VSEL1 registers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230406194158.963352-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use dev_err_probe() instead of dev_err() in the probe function, which
ensures the error code is always printed and, additionally, simplifies
the code a bit.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for introducing support for additional regulators which
do not use the maximum number of voltage selectors available for a given
mask, improve the mask computation formula by using fls().
Note fls() requires the bitops header, hence include it explicitly and
drop bits.h which is already pulled by bitops.h.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For consistency and improved clarity, use BIT() and GENMASK() macros for
defining the bitfields inside the registers. No functional changes
intended.
While here, also fix DIE_{ID,REV} inconsistent indentation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b61ac767db ("regulator: fan53555: Convert to use
regulator_set_ramp_delay_regmap") removed the slew_shift member from
struct fan53555_device_info, hence the {CTL,TCS}_SLEW_SHIFT definitions
remained unused. Drop them.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatibles to support Rockchip RK860X regulators.
RK8600/RK8601 are pretty similar to the FAN53555 regulators, while
RK8602/RK8603 are a bit different, having a wider voltage selection
range.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230406194158.963352-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If bperf (perf tools that use BPF skels) sets evsel->leader_skel or
evsel->follower_skel then it appears that evsel->bpf_skel is set and can
trigger the following use-after-free:
==13575==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000014080 at pc 0x55684b939880 bp 0x7ffdfcf30d70 sp 0x7ffdfcf30d68
READ of size 8 at 0x60c000014080 thread T0
#0 0x55684b93987f in sample_filter_bpf__destroy tools/perf/bpf_skel/sample_filter.skel.h:44:11
#1 0x55684b93987f in perf_bpf_filter__destroy tools/perf/util/bpf-filter.c:155:2
#2 0x55684b98f71e in evsel__exit tools/perf/util/evsel.c:1521:2
#3 0x55684b98a352 in evsel__delete tools/perf/util/evsel.c:1547:2
#4 0x55684b981918 in evlist__purge tools/perf/util/evlist.c:148:3
#5 0x55684b981918 in evlist__delete tools/perf/util/evlist.c:169:2
#6 0x55684b887d60 in cmd_stat tools/perf/builtin-stat.c:2598:2
..
0x60c000014080 is located 0 bytes inside of 128-byte region [0x60c000014080,0x60c000014100)
freed by thread T0 here:
#0 0x55684b780e86 in free compiler-rt/lib/asan/asan_malloc_linux.cpp:52:3
#1 0x55684b9462da in bperf_cgroup_bpf__destroy tools/perf/bpf_skel/bperf_cgroup.skel.h:61:2
#2 0x55684b9462da in bperf_cgrp__destroy tools/perf/util/bpf_counter_cgroup.c:282:2
#3 0x55684b944c75 in bpf_counter__destroy tools/perf/util/bpf_counter.c:819:2
#4 0x55684b98f716 in evsel__exit tools/perf/util/evsel.c:1520:2
#5 0x55684b98a352 in evsel__delete tools/perf/util/evsel.c:1547:2
#6 0x55684b981918 in evlist__purge tools/perf/util/evlist.c:148:3
#7 0x55684b981918 in evlist__delete tools/perf/util/evlist.c:169:2
#8 0x55684b887d60 in cmd_stat tools/perf/builtin-stat.c:2598:2
...
previously allocated by thread T0 here:
#0 0x55684b781338 in calloc compiler-rt/lib/asan/asan_malloc_linux.cpp:77:3
#1 0x55684b944e25 in bperf_cgroup_bpf__open_opts tools/perf/bpf_skel/bperf_cgroup.skel.h:73:35
#2 0x55684b944e25 in bperf_cgroup_bpf__open tools/perf/bpf_skel/bperf_cgroup.skel.h:97:9
#3 0x55684b944e25 in bperf_load_program tools/perf/util/bpf_counter_cgroup.c:55:9
#4 0x55684b944e25 in bperf_cgrp__load tools/perf/util/bpf_counter_cgroup.c:178:23
#5 0x55684b889289 in __run_perf_stat tools/perf/builtin-stat.c:713:7
#6 0x55684b889289 in run_perf_stat tools/perf/builtin-stat.c:949:8
#7 0x55684b888029 in cmd_stat tools/perf/builtin-stat.c:2537:12
Resolve by clearing 'evsel->bpf_skel' as part of bpf_counter__destroy().
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20230411051718.267228-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a driver for the Amlogic SPI flash controller support
on A113L SoC.
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230403183217.13280-3-mmkurbanov@sberdevices.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for MP5496 S1 regulator on IPQ9574 SoC.
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230407155727.20615-3-quic_devipriy@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
