Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.
Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.
Fixes: 7f2691a196 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The cgroup-v2 file mentions the concept of threaded controllers which can
be used in a threaded cgroup. However, it doesn't mention clearly which
controllers are threaded leading to some confusion about what controller
can be used requiring some experimentation. Clear this up by explicitly
listing the controllers that can be used currently in a threaded cgroup.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Paul Greenwalt says:
====================
ethtool: Add link mode maps for forced speeds
The following patch set was initially a part of [1]. As the purpose of the
original series was to add the support of the new hardware to the intel ice
driver, the refactoring of advertised link modes mapping was extracted to a
new set.
The patch set adds a common mechanism for mapping Ethtool forced speeds
with Ethtool supported link modes, which can be used in drivers code.
[1] https://lore.kernel.org/netdev/20230823180633.2450617-1-pawel.chmielewski@intel.com
Changelog:
v4->v5:
Separated ethtool and qede changes into two patches, fixed indentation,
and moved ethtool_forced_speed_maps_init() from ioctl.c to ethtool.h
v3->v4:
Moved the macro for setting fields into the common header file
v2->v3:
Fixed whitespaces, added missing line at end of file
v1->v2:
Fixed formatting, typo, moved declaration of iterator to loop line.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor ice_get_link_ksettings to using forced speed to link modes
mapping.
Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor qede_forced_speed_maps_init() to use commen implementation
ethtool_forced_speed_maps_init().
The qede driver was compile tested only.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The need to map Ethtool forced speeds to Ethtool supported link modes is
common among drivers. To support this, add a common structure for forced
speed maps and a function to init them. This is solution was originally
introduced in commit 1d4e4ecccb ("qede: populate supported link modes
maps on module init") for qede driver.
ethtool_forced_speed_maps_init() should be called during driver init
with an array of struct ethtool_forced_speed_map to populate the mapping.
Definitions for maps themselves are left in the driver code, as the sets
of supported link modes may vary between the devices.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In PCI, thermal and HAL interface layer module, the identifier
sc is used to represent an instance of ath11k_base structure.
However, within ath11k, the convention is to use "ab" to
represent an SoC "base" struct. So change the all instances
of sc to ab.
Compile tested only.
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231014032650.32605-3-quic_periyasa@quicinc.com
In WMI layer module, the identifier wmi_sc is used to represent
an instance of ath11k_wmi_base structure. However, within ath11k,
the convention is to use "ab" to represent an SoC "base" struct.
So change the all instances of wmi_sc to wmi_ab.
Compile tested only.
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231014032650.32605-2-quic_periyasa@quicinc.com
Currently struct ath12k_base defines the member bd_api. However, this
member is only accessed within ath12k_core_fetch_bdf(). Since the
scope is local just to that one function, remove it from ath12k_base
and instead just use a local stack variable.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013-ath11k_bd_api-v1-2-3fefe4629706@quicinc.com
Currently struct ath11k_base defines the member bd_api. However, this
member is only accessed within ath11k_core_fetch_bdf(). Since the
scope is local just to that one function, remove it from ath11k_base
and instead just use a local stack variable.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013-ath11k_bd_api-v1-1-3fefe4629706@quicinc.com
Currently QCN9274 supports only AP and station interface modes.
Add interface type mesh to ath12k_hw_params for
QCN9274 to provide support for mesh mode as well.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013070007.25597-2-quic_rgnanase@quicinc.com
The capabilities for the EHT mesh are generated from the capabilities
reported by the firmware. But the firmware only reports the overall
capabilities and not the one which are specific for mesh.
Capabilities which requires infrastructure setup with a main STA(AP)
controlling operations are not needed for mesh and hence remove these
capabilities from the list.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013070007.25597-3-quic_rgnanase@quicinc.com
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-11-robh@kernel.org
errno is 0 because these hooks are called from prerouting and forward.
There is no socket that the errno would ever be propagated to.
Other netfilter modules (e.g. nf_nat, conntrack, ...) can be converted
in a similar way.
Signed-off-by: Florian Westphal <fw@strlen.de>
net_dropmonitor blames core.c:nf_hook_slow.
Add NF_DROP_REASON() helper and use it in nft_do_chain().
The helper releases the skb, so exact drop location becomes
available. Calling code will observe the NF_STOLEN verdict
instead.
Adjust nf_hook_slow so we can embed an erro value wih
NF_STOLEN verdicts, just like we do for NF_DROP.
After this, drop in nftables can be pinpointed to a drop due
to a rule or the chain policy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Same as previous change: we need to mask out the non-verdict bits, as
upcoming patches may embed an errno value in NF_STOLEN verdicts too.
NF_DROP could already do this, but not all called functions do this.
Checks that only test ret vs NF_ACCEPT are fine, the 'errno parts'
are always 0 for those.
Signed-off-by: Florian Westphal <fw@strlen.de>
This function calls helpers that can return nf-verdicts, but then
those get converted to -1/0 as thats what the caller expects.
Theoretically NF_DROP could have an errno number set in the upper 24
bits of the return value. Or any of those helpers could return
NF_STOLEN, which would result in use-after-free.
This is fine as-is, the called functions don't do this yet.
But its better to avoid possible future problems if the upcoming
patchset to add NF_DROP_REASON() support gains further users, so remove
the 0/-1 translation from the picture and pass the verdicts down to
the caller.
Signed-off-by: Florian Westphal <fw@strlen.de>
nftables trace infra must mask out the non-verdict bit parts of the
return value, else followup changes that 'return errno << 8 | NF_STOLEN'
will cause breakage.
Signed-off-by: Florian Westphal <fw@strlen.de>
These checks assume that the caller only returns NF_DROP without
any errno embedded in the upper bits.
This is fine right now, but followup patches will start to propagate
such errors to allow kfree_skb_drop_reason() in the called functions,
those would then indicate 'errno << 8 | NF_STOLEN'.
To not break things we have to mask those parts out.
Signed-off-by: Florian Westphal <fw@strlen.de>
Jiri Pirko says:
====================
devlink: fix a deadlock when taking devlink instance lock while holding RTNL lock
devlink_port_fill() may be called sometimes with RTNL lock held.
When putting the nested port function devlink instance attrs,
current code takes nested devlink instance lock. In that case lock
ordering is wrong.
Patch #1 is a dependency of patch #2.
Patch #2 converts the peernet2id_alloc() call to rely in RCU so it could
called without devlink instance lock.
Patch #3 takes device reference for devlink instance making sure that
device does not disappear before devlink_release() is called.
Patch #4 benefits from the preparations done in patches #2 and #3 and
removes the problematic nested devlink lock aquisition.
Patched #5-#7 improve documentation to reflect this issue so it is
avoided in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a documentation for devlink_rel_nested_in_notify() describing the
devlink instance locking consequences.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a note describing the locking order of taking RTNL lock with devlink
instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a part talking about nested devlink instances describing
the helpers and locking ordering.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to allow to access device pointer without devlink
instance lock held, make sure the device pointer is usable until
devlink_release() is called.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
peernet2id_alloc() allows to be called lockless with peer net pointer
obtained in RCU critical section and makes sure to return ns ID if net
namespaces is not being removed concurrently. Benefit from
read_pnet_rcu() helper addition, use it to obtain net pointer under RCU
read lock and pass it to peernet2id_alloc() to get ns ID.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The documentation for kbuild and makefiles is missing an explanation of
a variable important for some architectures.
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
You cannot run this code because arch/um/Makefile does not define the
vdso_install target.
It appears that this code was blindly copied from another architecture.
Remove the dead code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
You cannot run this code because arch/csky/Makefile does not define the
vdso_install target.
It appears that this code was blindly copied from another architecture.
Remove the dead code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
The first few lines of section_rel() and section_rela() are the same.
They both retrieve the index of the section to which the relocaton
applies, and skip known-good sections. This common code should be moved
to check_sec_ref().
Avoid ugly casts when computing 'start' and 'stop', and also make the
Elf_Rel and Elf_Rela pointers const.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
We can replace &elf->sechdrs[i] with &sechdrs[i] to slightly shorten
the code because we already have the local variable 'sechdrs'.
However, defining 'sechdr' instead shortens the code further.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The current TO_NATIVE() has some limitations:
1) You cannot cast the argument.
2) You cannot pass a variable marked as 'const'.
3) Passing an array is a bug, but it is not detected.
Impelement TO_NATIVE() using bswap_*() functions. These are GNU
extensions. If we face portability issues, we can port the code from
include/uapi/linux/swab.h.
With this change, get_rel_type_and_sym() can be simplified by casting
the arguments directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
The generation of the kernel-devel package is disabled for binrpm-pkg
presumably because it was quite big (>= 200MB) and took a long time to
package.
Commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and
linux-headers Deb package") reduced the package size to 12MB, and now
it is quick to build. It won't hurt to have binrpm-pkg generate it by
default.
If you want to skip the kernel-devel package generation, you can pass
RPMOPTS='--without devel':
$ make binrpm-pkg RPMOPTS='--without devel'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is a follow-up to the commit 9b2b86332a ("bpf: Allow to use kfunc
XDP hints and frags together").
The are some possible implementations problems that may arise when providing
metadata specifically for multi-buffer packets, therefore there must be a
possibility to test such option separately.
Add an option to use multi-buffer AF_XDP xdp_hw_metadata and mark used XDP
program as capable to use frags.
As for now, xdp_hw_metadata accepts no options, so add simple option
parsing logic and a help message.
For quick reference, also add an ingress packet generation command to the
help message. The command comes from [0].
Example of output for multi-buffer packet:
xsk_ring_cons__peek: 1
0xead018: rx_desc[15]->addr=10000000000f000 addr=f100 comp_addr=f000
rx_hash: 0x5789FCBB with RSS type:0x29
rx_timestamp: 1696856851535324697 (sec:1696856851.5353)
XDP RX-time: 1696856843158256391 (sec:1696856843.1583)
delta sec:-8.3771 (-8377068.306 usec)
AF_XDP time: 1696856843158413078 (sec:1696856843.1584)
delta sec:0.0002 (156.687 usec)
0xead018: complete idx=23 addr=f000
xsk_ring_cons__peek: 1
0xead018: rx_desc[16]->addr=100000000008000 addr=8100 comp_addr=8000
0xead018: complete idx=24 addr=8000
xsk_ring_cons__peek: 1
0xead018: rx_desc[17]->addr=100000000009000 addr=9100 comp_addr=9000 EoP
0xead018: complete idx=25 addr=9000
Metadata is printed for the first packet only.
[0] https://lore.kernel.org/all/20230119221536.3349901-18-sdf@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231017162800.24080-1-larysa.zaremba@intel.com
kzalloc() gives us a zeroed memory, no need to explicitly assing 0 or
NULL or similar to the members of the data structure that has been
allocated with the above mentioned API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert hard to read custom code to list_for_each().
No functional changes intended.
Note, we may not use list_for_each_entry() as at the end of the list
the iterator will point to an invalid entry and may not be dereferenced.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve readability and maintainability by replacing a hardcoded string
allocation and formatting by the use of the kasprintf() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016133135.1203643-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pvpanic-mmio.c and pvpanic-pci.c share a lot of code.
Refactor it into pvpanic.c where it doesn't have to be kept in sync
manually and where the core logic can be understood more easily.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231011-pvpanic-cleanup-v2-1-4b21d56f779f@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework Xilinx hwicap driver probe to use current best practices using
devres APIs, device_get_match_data(), and typed firmware property accessors.
There's no longer any non-DT probing, so CONFIG_OF ifdefs can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006214228.337064-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2023100613-lustiness-affiliate-7dcb@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GSC devices perform legal firmware initiated resets due to state transition
that may appear as unexpected to the driver. Lower the log level for those
devices to debug level and save the firmware status registers.
When the device comes out of the reset it is possible to check whether the
resets was due to a firmware error or an exception
and only than produce a warning.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231015080540.95922-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
