With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.
Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Much of the arm64 KVM code uses cpus_have_const_cap() to check for
cpucaps, but this is unnecessary and it would be preferable to use
cpus_have_final_cap().
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
KVM is initialized after cpucaps have been finalized and alternatives
have been patched. Since commit:
d86de40dec ("arm64: cpufeature: upgrade hyp caps to final")
... use of cpus_have_const_cap() in hyp code is automatically converted
to use cpus_have_final_cap():
| static __always_inline bool cpus_have_const_cap(int num)
| {
| if (is_hyp_code())
| return cpus_have_final_cap(num);
| else if (system_capabilities_finalized())
| return __cpus_have_const_cap(num);
| else
| return cpus_have_cap(num);
| }
Thus, converting hyp code to use cpus_have_final_cap() directly will not
result in any functional change.
Non-hyp KVM code is also not executed until cpucaps have been finalized,
and it would be preferable to extent the same treatment to this code and
use cpus_have_final_cap() directly.
This patch converts instances of cpus_have_const_cap() in KVM-only code
over to cpus_have_final_cap(). As all of this code runs after cpucaps
have been finalized, there should be no functional change as a result of
this patch, but the redundant instructions generated by
cpus_have_const_cap() will be removed from the non-hyp KVM code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64_cpu_capabilities::cpu_enable callbacks are intended for
cpu-local feature enablement (e.g. poking system registers). These get
called for each online CPU when boot/system cpucaps get finalized and
enabled, and get called whenever a CPU is subsequently onlined.
For KPTI with the ARM64_UNMAP_KERNEL_AT_EL0 cpucap, we use the
kpti_install_ng_mappings() function as the cpu_enable callback. This
does a mixture of cpu-local configuration (setting VBAR_EL1 to the
appropriate trampoline vectors) and some global configuration (rewriting
the swapper page tables to sue non-glboal mappings) that must happen at
most once.
This patch splits kpti_install_ng_mappings() into a cpu-local
cpu_enable_kpti() initialization function and a system-wide
kpti_install_ng_mappings() function. The cpu_enable_kpti() function is
responsible for selecting the necessary cpu-local vectors each time a
CPU is onlined, and the kpti_install_ng_mappings() function performs the
one-time rewrite of the translation tables too use non-global mappings.
Splitting the two makes the code a bit easier to follow and also allows
the page table rewriting code to be marked as __init such that it can be
freed after use.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For ARM64_WORKAROUND_2658417, we use a cpu_enable() callback to hide the
ID_AA64ISAR1_EL1.BF16 ID register field. This is a little awkward as
CPUs may attempt to apply the workaround concurrently, requiring that we
protect the bulk of the callback with a raw_spinlock, and requiring some
pointless work every time a CPU is subsequently hotplugged in.
This patch makes this a little simpler by handling the masking once at
boot time. A new user_feature_fixup() function is called at the start of
setup_user_features() to mask the feature, matching the style of
elf_hwcap_fixup(). The ARM64_WORKAROUND_2658417 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible.
Note that the ARM64_WORKAROUND_2658417 capability is matched with
ERRATA_MIDR_RANGE(), which implicitly gives the capability a
ARM64_CPUCAP_LOCAL_CPU_ERRATUM type, which forbids the late onlining of
a CPU with the erratum if the erratum was not present at boot time.
Therefore this patch doesn't change the behaviour for late onlining.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently setup_cpu_features() handles a mixture of one-time kernel
feature setup (e.g. cpucaps) and one-time user feature setup (e.g. ELF
hwcaps). Subsequent patches will rework other one-time setup and expand
the logic currently in setup_cpu_features(), and in preparation for this
it would be helpful to split the kernel and user setup into separate
functions.
This patch splits setup_user_features() out of setup_cpu_features(),
with a few additional cleanups of note:
* setup_cpu_features() is renamed to setup_system_features() to make it
clear that it handles system-wide feature setup rather than cpu-local
feature setup.
* setup_system_capabilities() is folded into setup_system_features().
* Presence of TTBR0 pan is logged immediately after
update_cpu_capabilities(), so that this is guaranteed to appear
alongside all the other detected system cpucaps.
* The 'cwg' variable is removed as its value is only consumed once and
it's simpler to use cache_type_cwg() directly without assigning its
return value to a variable.
* The call to setup_user_features() is moved after alternatives are
patched, which will allow user feature setup code to depend on
alternative branches and allow for simplifications in subsequent
patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The cpus_have_final_cap() function can be used to test a cpucap while
also verifying that we do not consume the cpucap until system
capabilities have been finalized. It would be helpful if we could do
likewise for boot cpucaps.
This patch adds a new cpus_have_final_boot_cap() helper which can be
used to test a cpucap while also verifying that boot capabilities have
been finalized. Users will be added in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Many cpucaps can only be set when certain CONFIG_* options are selected,
and we need to check the CONFIG_* option before the cap in order to
avoid generating redundant code. Due to this, we have a growing number
of helpers in <asm/cpufeature.h> of the form:
| static __always_inline bool system_supports_foo(void)
| {
| return IS_ENABLED(CONFIG_ARM64_FOO) &&
| cpus_have_const_cap(ARM64_HAS_FOO);
| }
This is unfortunate as it forces us to use cpus_have_const_cap()
unnecessarily, resulting in redundant code being generated by the
compiler. In the vast majority of cases, we only require that feature
checks indicate the presence of a feature after cpucaps have been
finalized, and so it would be sufficient to use alternative_has_cap_*().
However some code needs to handle a feature before alternatives have
been patched, and must test the system_cpucaps bitmap via
cpus_have_const_cap(). In other cases we'd like to check for
unintentional usage of a cpucap before alternatives are patched, and so
it would be preferable to use cpus_have_final_cap().
Placing the IS_ENABLED() checks in each callsite is tedious and
error-prone, and the same applies for writing wrappers for each
comination of cpucap and alternative_has_cap_*() / cpus_have_cap() /
cpus_have_final_cap(). It would be nicer if we could centralize the
knowledge of which cpucaps are possible, and have
alternative_has_cap_*(), cpus_have_cap(), and cpus_have_final_cap()
handle this automatically.
This patch adds a new cpucap_is_possible() function which will be
responsible for checking the CONFIG_* option, and updates the low-level
cpucap checks to use this. The existing CONFIG_* checks in
<asm/cpufeature.h> are moved over to cpucap_is_possible(), but the (now
trival) wrapper functions are retained for now.
There should be no functional change as a result of this patch alone.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For clarity it would be nice to factor cpucap manipulation out of
<asm/cpufeature.h>, and the obvious place would be <asm/cpucap.h>, but
this will clash somewhat with <generated/asm/cpucaps.h>.
Rename <generated/asm/cpucaps.h> to <generated/asm/cpucap-defs.h>,
matching what we do for <generated/asm/sysreg-defs.h>, and introduce a
new <asm/cpucaps.h> which includes the generated header.
Subsequent patches will fill out <asm/cpucaps.h>.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When KPTI is in use, we cannot register a runstate region as XEN
requires that this is always a valid VA, which we cannot guarantee. Due
to this, xen_starting_cpu() must avoid registering each CPU's runstate
region, and xen_guest_init() must avoid setting up features that depend
upon it.
We tried to ensure that in commit:
f88af7229f (" xen/arm: do not setup the runstate info page if kpti is enabled")
... where we added checks for xen_kernel_unmapped_at_usr(), which wraps
arm64_kernel_unmapped_at_el0() on arm64 and is always false on 32-bit
arm.
Unfortunately, as xen_guest_init() is an early_initcall, this happens
before secondary CPUs are booted and arm64 has finalized the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap which backs
arm64_kernel_unmapped_at_el0(), and so this can subsequently be set as
secondary CPUs are onlined. On a big.LITTLE system where the boot CPU
does not require KPTI but some secondary CPUs do, this will result in
xen_guest_init() intializing features that depend on the runstate
region, and xen_starting_cpu() registering the runstate region on some
CPUs before KPTI is subsequent enabled, resulting the the problems the
aforementioned commit tried to avoid.
Handle this more robsutly by deferring the initialization of the
runstate region until secondary CPUs have been initialized and the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap has been finalized. The per-cpu work is
moved into a new hotplug starting function which is registered later
when we're certain that KPTI will not be used.
Fixes: f88af7229f ("xen/arm: do not setup the runstate info page if kpti is enabled")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Bertrand Marquis <bertrand.marquis@arm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We attempt to initialize each CPU's arch_timer event stream in
arch_timer_evtstrm_enable(), which we call from the
arch_timer_starting_cpu() cpu hotplug callback which is registered early
in boot. As this is registered before we initialize the system cpucaps,
the test for ARM64_HAS_ECV will always be false for CPUs present at boot
time, and will only be taken into account for CPUs onlined late
(including those which are hotplugged out and in again).
Due to this, CPUs present and boot time may not use the intended divider
and scale factor to generate the event stream, and may differ from other
CPUs.
Correct this by only initializing the event stream after cpucaps have been
finalized, registering a separate CPU hotplug callback for the event stream
configuration. Since the caps must be finalized by this point, use
cpus_have_final_cap() to verify this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() and size_sub() helpers, instead of the
open-coded version, to calculate the size for the allocation of the
whole flexible structure, including of course, the flexible-array
member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSRvh1j2MVVhuOUv@work
Signed-off-by: Mark Brown <broonie@kernel.org>
AHB memory as MMIO should be mapped with ioremap rather than ioremap_wc,
which should have been used initially just to handle unaligned access as
a workaround.
Fixes: d166a73503 ("spi: fspi: dynamically alloc AHB memory")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20231010201524.2021340-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Andrii Nakryiko says:
====================
This patch set fixes ambiguity in BPF verifier log output of SCALAR register
in the parts that emit umin/umax, smin/smax, etc ranges. See patch #4 for
details.
Also, patch #5 fixes an issue with verifier log missing instruction context
(state) output for conditionals that trigger precision marking. See details in
the patch.
First two patches are just improvements to two selftests that are very flaky
locally when run in parallel mode.
Patch #3 changes 'align' selftest to be less strict about exact verifier log
output (which patch #4 changes, breaking lots of align tests as written). Now
test does more of a register substate checks, mostly around expected var_off()
values. This 'align' selftests is one of the more brittle ones and requires
constant adjustment when verifier log output changes, without really catching
any new issues. So hopefully these changes can minimize future support efforts
for this specific set of tests.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.
E.g., a nice and simple case would be:
2: (d5) if r0 s<= 0x0 goto pc+1 ; R0_w=0
But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:
4: (75) if r0 s>= 0x0 goto pc+1
mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
6: R0_w=0
First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.
But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.
This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.
print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram). Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.
Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.
As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:
9: (16) if w4 == 0x1 goto pc+9
mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
9: R4=1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
Currently the way that verifier prints SCALAR_VALUE register state (and
PTR_TO_PACKET, which can have var_off and ranges info as well) is very
ambiguous.
In the name of brevity we are trying to eliminate "unnecessary" output
of umin/umax, smin/smax, u32_min/u32_max, and s32_min/s32_max values, if
possible. Current rules are that if any of those have their default
value (which for mins is the minimal value of its respective types: 0,
S32_MIN, or S64_MIN, while for maxs it's U32_MAX, S32_MAX, S64_MAX, or
U64_MAX) *OR* if there is another min/max value that as matching value.
E.g., if smin=100 and umin=100, we'll emit only umin=10, omitting smin
altogether. This approach has a few problems, being both ambiguous and
sort-of incorrect in some cases.
Ambiguity is due to missing value could be either default value or value
of umin/umax or smin/smax. This is especially confusing when we mix
signed and unsigned ranges. Quite often, umin=0 and smin=0, and so we'll
have only `umin=0` leaving anyone reading verifier log to guess whether
smin is actually 0 or it's actually -9223372036854775808 (S64_MIN). And
often times it's important to know, especially when debugging tricky
issues.
"Sort-of incorrectness" comes from mixing negative and positive values.
E.g., if umin is some large positive number, it can be equal to smin
which is, interpreted as signed value, is actually some negative value.
Currently, that smin will be omitted and only umin will be emitted with
a large positive value, giving an impression that smin is also positive.
Anyway, ambiguity is the biggest issue making it impossible to have an
exact understanding of register state, preventing any sort of automated
testing of verifier state based on verifier log. This patch is
attempting to rectify the situation by removing ambiguity, while
minimizing the verboseness of register state output.
The rules are straightforward:
- if some of the values are missing, then it definitely has a default
value. I.e., `umin=0` means that umin is zero, but smin is actually
S64_MIN;
- all the various boundaries that happen to have the same value are
emitted in one equality separated sequence. E.g., if umin and smin are
both 100, we'll emit `smin=umin=100`, making this explicit;
- we do not mix negative and positive values together, and even if
they happen to have the same bit-level value, they will be emitted
separately with proper sign. I.e., if both umax and smax happen to be
0xffffffffffffffff, we'll emit them both separately as
`smax=-1,umax=18446744073709551615`;
- in the name of a bit more uniformity and consistency,
{u32,s32}_{min,max} are renamed to {s,u}{min,max}32, which seems to
improve readability.
The above means that in case of all 4 ranges being, say, [50, 100] range,
we'd previously see hugely ambiguous:
R1=scalar(umin=50,umax=100)
Now, we'll be more explicit:
R1=scalar(smin=umin=smin32=umin32=50,smax=umax=smax32=umax32=100)
This is slightly more verbose, but distinct from the case when we don't
know anything about signed boundaries and 32-bit boundaries, which under
new rules will match the old case:
R1=scalar(umin=50,umax=100)
Also, in the name of simplicity of implementation and consistency, order
for {s,u}32_{min,max} are emitted *before* var_off. Previously they were
emitted afterwards, for unclear reasons.
This patch also includes a few fixes to selftests that expect exact
register state to accommodate slight changes to verifier format. You can
see that the changes are pretty minimal in common cases.
Note, the special case when SCALAR_VALUE register is a known constant
isn't changed, we'll emit constant value once, interpreted as signed
value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-5-andrii@kernel.org
Align subtest is very specific and finicky about expected verifier log
output and format. This is often completely unnecessary as in a bunch of
situations test actually cares about var_off part of register state. But
given how exact it is right now, any tiny verifier log changes can lead
to align tests failures, requiring constant adjustment.
This patch tries to make this a bit more robust by making logic first
search for specified register and then allowing to match only portion of
register state, not everything exactly. This will come handly with
follow up changes to SCALAR register output disambiguation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-4-andrii@kernel.org
Given missed_kprobe_recursion is non-serial and uses common testing
kfuncs to count number of recursion misses it's possible that some other
parallel test can trigger extraneous recursion misses. So we can't
expect exactly 1 miss. Relax conditions and expect at least one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-3-andrii@kernel.org
Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org
The PSI trigger code is now making a distinction between privileged and
unprivileged triggers, after the following commit:
65457b74aa ("sched/psi: Rename existing poll members in preparation")
But some comments have not been modified along with the code, so they
need to be updated.
This will help readers better understand the code.
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/202310161920399921184@zte.com.cn
The same logic is used for clock stop prepare and deprepare, and
having different logs for the two steps helps identify problems.
In addition, when the "NotFinished" bit remains set, the error
handling is not quite right:
a) for the clock stop prepare, the error is handled at the caller
level, and the error is ignored: there's no good reason to prevent the
pm_runtime suspend from happening. Throwing an error that is later
ignored is confusing.
b) for the clock stop deprepare, the error is ignored in bus.c and a
dev_warn() log shown. Throwing an error is also alarming users for no
good reason.
For both cases, demoting the error to dev_dbg() makes more sense.
Link: https://github.com/thesofproject/linux/issues/4619
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010812.114216-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set. This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.
Fixes: a4ffb13c89 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement load_unaligned_zeropad() and enable DCACHE_WORD_ACCESS to
speed up string operations in fs/dcache.c and fs/namei.c.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide an s390 specific word-at-a-time implementation. Compared to the
generic variant the generated code for has_zero() is slightly
better. However find_zero() is much simpler since it reuses the result
of __fls() aka flogr() and now comes without any conditional branches,
while the generic variant has three of them.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of __EX_TABLE() macro, rename __EX_TABLE_UA() to __EX_TABLE()
and convert users of old __EX_TABLE() macro so they pass more parameters
to the changed __EX_TABLE() semantics.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Funciton loads_init() does not use loads_offset parameter.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With Secure Execution the error reply RX 0x8B now carries
an APFS value indicating why the request has been filtered
by a lower layer of the firmware. So display this value
as a warning line in the s390 debug feature trace.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces a new AP queue internal attribute
se_bound which reflects the bound state of an APQN within
a Secure Execution environment.
With introduction of Secure Execution guests now an
AP firmware queue needs to be bound to the guest before
usage. This patch introduces a new internal attribute
reflecting this bound state and some glue code to handle
this new field during lifetime of an AP queue device.
Together with that now the zcrypt scheduler considers
the state of the AP queues when a message is about to be
distributed among the existing queues. There is a new
function ap_queue_usable() which returns true only when
all conditions for using this AP queue device are fulfilled.
In details this means: the AP queue needs to be configured,
not checkstopped and within an SE environment it needs
to be bound. So the new function gives and indication
if the AP queue device is ready to serve requests or not.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes: 2d72eaf036 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When physical memory is defined under z/VM using DEF STOR CONFIG, there
may be memory holes that are not hotpluggable memory. In such cases,
DCSS mapping could be placed in one of these memory holes. Subsequently,
attempting memory access to such DCSS mapping would result in a kasan
failure because there is no shadow memory mapping for it.
To maintain consistency with cases where DCSS mapping is positioned after
the kernel identity mapping, which is then covered by kasan zero shadow
mapping, handle the scenario above by populating zero shadow mapping
for memory holes where DCSS mapping could potentially be placed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When dma_set_coherent_mask() fails, sch->lock has not been
freed, which is allocated in css_sch_create_locks(), leading
to a memleak.
Fixes: 4520a91a97 ("s390/cio: use dma helpers for setting masks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-Id: <20230921071412.13806-1-dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/linux-s390/bd38baa8-7b9d-4d89-9422-7e943d626d6e@linux.ibm.com/
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add DT support, by:
1. Creating a panel bridge from DT, and attaching it to the encoder,
2. Replacing the custom connector with a bridge connector,
3. Obtaining clock configuration based on the compatible value.
Note that for now the driver uses a fixed clock configuration selecting
the bus clock, as the current code to select other clock inputs needs
changes to support any other SoCs than SH7724.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6185ab76aa300fa402e4f6610b2109665f2d8a1c.1694767209.git.geert+renesas@glider.be
Now the suspend/resume methods no longer need to look at internal driver
state, the dpms and started fields in the shmob_drm_crtc structure can
be removed, as well as the shmob_drm_crtc_dpms() wrapper. After this,
shmob_drm_crtc_atomic_{en,dis}able() became just wrappers around
shmob_drm_crtc_st{art,op}(), so inline the latter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/905b9ca72f43d40438c8cb1199cde140eb123204.1694767209.git.geert+renesas@glider.be
Implement atomic mode setting for both the primary and overlay planes.
This involves:
- Moving the primary plane handling code from CRTC mode setting to
plane handling shared by primary and overlay planes,
- Adding basic CRTC and mode config atomic mode setting ops, which
don't do much yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a6b698a1c8c1eaf631c2f928f5888ab5fe7aa4c3.1694767209.git.geert+renesas@glider.be
