J784S4 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.
See J784S4 Technical Reference Manual (SPRUJ52)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20231010111723.17524-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721S2 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.
See J721S2 Technical Reference Manual (SPRUJ28)
for further details: http://www.ti.com/lit/pdf/spruj28
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20231010111723.17524-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
"simple-mfd" as standalone compatible is frowned upon, so model main and
MCU NAVSS (Navigator SubSystem) nodes as simple-bus as there is really
no need for these nodes to be MFD.
Link: https://lore.kernel.org/r/20231005151302.1290363-3-vigneshr@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
"simple-mfd" as standalone compatible is frowned upon, so model DMSS
(Data Movement Subsystem) node as simple-bus as there is really no need
for these nodes to be MFD.
Link: https://lore.kernel.org/r/20231005151302.1290363-2-vigneshr@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The v4l2_subdev_init_finalize() is a macro that creates an unique lockdep
key and name. As the CCS driver initialises all three of its sub-devices
using the same call site, this creates a lockdep warning. Address it.
Fixes: d8bca3ed1d ("media: ccs: Use sub-device active state")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Initialise sub-device state in init_cfg callback using ccs_propagate() to
the extent it covers of the initialisation. This fixes a bug where the
driver configuration was incorrectly initialised.
Fixes: d8bca3ed1d ("media: ccs: Use sub-device active state")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Two paths in the probe function return directly instead of jumping to
error handling. Fix them.
Fixes: 24d756e914 ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Because all properties are now accepted, there is no need to explicitly
allow them in the schema.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.
Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.
Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Allow properties from video-interface-devices.yaml for the SK Hynix Hi-846
sensor.
All properties specified in video-interface-devices.yaml schema are
valid, so make them accepted by changing "additionalProperties: false"
to "unevaluatedProperties: false" at the schema top-level.
Add two properties from video-interface-devices.yaml to the example
to validate the new schema.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus.
The Cadence CSI2RX IP acts as a bridge between the TI specific parts and
the CSI-2 protocol parts. TI then has a wrapper on top of this bridge
called the SHIM layer. It takes in data from stream 0, repacks it, and
sends it to memory over PSI-L DMA.
This driver acts as the "front end" to V4L2 client applications. It
implements the required ioctls and buffer operations, passes the
necessary calls on to the bridge, programs the SHIM layer, and performs
DMA via the dmaengine API to finally return the data to a buffer
supplied by the application.
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add media link validation to make sure incorrectly configured pipelines
are caught.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The devnode can be used by media-ctl and other userspace tools to
perform configurations on the subdev. Without it, media-ctl returns
ENOENT when setting format on the sensor subdev.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Firstly, there is no VC_EN bit present in the STREAM_DATA_CFG register.
Bit 31 is part of the VL_SELECT field. Remove it completely.
Secondly, it makes little sense to enable ith virtual channel for ith
stream. Sure, there might be a use-case that demands it. But there might
also be a use case that demands all streams to use the 0th virtual
channel. Prefer this case over the former because it is less arbitrary
and also makes it very clear what the limitations of the current driver
is instead of giving a false impression that multiple virtual channels
are supported.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The stream stop procedure says that the STOP bit should be set when the
stream is to be stopped, and then the ready bit in stream status
register polled to make sure the STOP operation is finished.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This resets the stream state machines and FIFOs, giving them a clean
slate. On J721E if the streams are not reset before starting the
capture, the captured frame gets wrapped around vertically on every run
after the first.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some platforms like TI's J721E can have the CSI2RX paired with an
external DPHY. Use the generic PHY framework to configure the DPHY with
the correct link frequency.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The format is needed to calculate the link speed for the external DPHY
configuration. It is not right to query the format from the source
subdev. Add get_fmt and set_fmt pad operations so that the format can be
configured and correct bpp be selected.
Initialize and use the v4l2 subdev active state to keep track of the
active formats. Also propagate the new format from the sink pad to all
the source pads.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Call media_entity_cleanup() in probe error path and remove to make sure
the media entity is cleaned up properly.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.
Fixes: 1fc3b37f34 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a SoC-specific compatible string for TI's integration of this IP in
J7 and AM62 line of SoCs.
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The data-lanes property maps the logical lane numbers to the physical
lane numbers. The position of an entry is the logical lane number and
its value is the physical lane number. Since one physical lane can only
map to one logical lane, no number in the list should repeat. Add the
uniqueItems constraint on the property to enforce this.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Correct the wrong spelling of 'exposes' in the binner section.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename the fbdev mmap helper fb_pgprotect() to pgprot_framebuffer().
The helper sets VMA page-access flags for framebuffers in device I/O
memory.
Also clean up the helper's parameters and return value. Instead of
the VMA instance, pass the individial parameters separately: existing
page-access flags, the VMAs start and end addresses and the offset
in the underlying device memory rsp file. Return the new page-access
flags. These changes align pgprot_framebuffer() with other pgprot_()
functions.
v4:
* fix commit message (Christophe)
v3:
* rename fb_pgprotect() to pgprot_framebuffer() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-3-tzimmermann@suse.de
Only PowerPC's fb_pgprotect() needs the file argument, although
the implementation in either phys_mem_access_prot() or
pci_phys_mem_access_prot() does not use it. Pass NULL to the internal
helper in preparation of further updates. A later patch will remove
the file parameter from fb_pgprotect().
While at it, replace the shift operation with PHYS_PFN().
v5:
* state function names in commit description (Javier)
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-2-tzimmermann@suse.de
By default fastboot is enabled on all Display 9+ platforms and disabled
on older platforms. Its not necessary to retain this as a module
parameter.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926091157.635438-1-arun.r.murthy@intel.com
Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c
("af_packet: Fix warning of fortified memcpy() in packet_getname().").
It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.
However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.
include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
| ^~~~~~~~~~~~~~~~~~~~
To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1]
Fixes: a0ade8404c ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.
This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.
Fixes: 1308fb4e4e ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SK-AM62A-LP uses TPS6593x PMIC (interfaced over I2C) to power the SoC
and various other peripherals on the board [1].
Specifically, the audio codec (TLV320AIC3106) on the board relies on the
PMIC for the DVDD (1.8V) supply.
[1]: https://www.ti.com/lit/zip/sprr459
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231003-mcasp_am62a-v3-6-2b631ff319ca@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The ->idt_seq and ->recv_jiffies variables added by:
1a3ea611fc ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
... place the exit-time check of the bottom bit of ->idt_seq after the
this_cpu_dec_return() that re-enables NMI nesting. This can result in
the following sequence of events on a given CPU in kernels built with
CONFIG_NMI_CHECK_CPU=y:
o An NMI arrives, and ->idt_seq is incremented to an odd number.
In addition, nmi_state is set to NMI_EXECUTING==1.
o The NMI is processed.
o The this_cpu_dec_return(nmi_state) zeroes nmi_state and returns
NMI_EXECUTING==1, thus opting out of the "goto nmi_restart".
o Another NMI arrives and ->idt_seq is incremented to an even
number, triggering the warning. But all is just fine, at least
assuming we don't get so many closely spaced NMIs that the stack
overflows or some such.
Experience on the fleet indicates that the MTBF of this false positive
is about 70 years. Or, for those who are not quite that patient, the
MTBF appears to be about one per week per 4,000 systems.
Fix this false-positive warning by moving the "nmi_restart" label before
the initial ->idt_seq increment/check and moving the this_cpu_dec_return()
to follow the final ->idt_seq increment/check. This way, all nested NMIs
that get past the NMI_NOT_RUNNING check get a clean ->idt_seq slate.
And if they don't get past that check, they will set nmi_state to
NMI_LATCHED, which will cause the this_cpu_dec_return(nmi_state)
to restart.
Fixes: 1a3ea611fc ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/0cbff831-6e3d-431c-9830-ee65ee7787ff@paulmck-laptop
When compiling the x86 kernel, if X86_LOCAL_APIC is not enabled but
GENERIC_MSI_IRQ is selected in '.config', the following compilation
error will occur:
include/linux/gpio/driver.h:38:19: error:
field 'msiinfo' has incomplete type
kernel/irq/msi.c:752:5: error: invalid use of incomplete typedef
'msi_alloc_info_t' {aka 'struct irq_alloc_info'}
kernel/irq/msi.c:740:1: error: control reaches end of non-void function
This is because file such as 'kernel/irq/msi.c' only depends on
'GENERIC_MSI_IRQ', and uses 'struct msi_alloc_info_t'. However,
this struct depends on 'X86_LOCAL_APIC'.
When enable 'GENERIC_MSI_IRQ' or 'X86_LOCAL_APIC' will select
'IRQ_DOMAIN_HIERARCHY', so exposing this struct using
'IRQ_DOMAIN_HIERARCHY' rather than 'X86_LOCAL_APIC'.
Under the above conditions, if 'HPET_TIMER' is selected, the following
compilation error will occur:
arch/x86/kernel/hpet.c:550:13: error: ‘x86_vector_domain’ undeclared
arch/x86/kernel/hpet.c:600:9: error: implicit declaration of
function ‘init_irq_alloc_info’
This is because 'x86_vector_domain' is defined in 'kernel/apic/vector.c'
which is compiled only when 'X86_LOCAL_APIC' is enabled. Besides,
function 'msi_domain_set_affinity' is defined in 'include/linux/msi.h'
which depends on 'GENERIC_MSI_IRQ'. So use 'X86_LOCAL_APIC' and
'GENERIC_MSI_IRQ' to expose these code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231012032659.323251-1-yaolu@kylinos.cn
The handling of STATX_CHANGE_COOKIE was moved into generic_fillattr in
commit 0d72b92883 (fs: pass the request_mask to generic_fillattr), but
we didn't account for the fact that xfs doesn't call generic_fillattr at
all.
Make XFS report its i_version as the STATX_CHANGE_COOKIE.
Fixes: 0d72b92883 (fs: pass the request_mask to generic_fillattr)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
./fs/xfs/scrub/xfile.c: xfs_format.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6209
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The agend should be "start + length - 1", then, blockcount should be
"end + 1 - start". Correct 2 calculation mistakes.
Also, rename "agend" to "range_agend" because it's not the end of the AG
per se; it's the end of the dead region within an AG's agblock space.
Fixes: 5cf32f63b0 ("xfs: fix the calculation for "end" and "length"")
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Rollup of a couple of reviewed fixes.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZScEigAKCRBKO3ySh0YR
poyIAQDh9M10LGYfT6NCjxewOq0+JLPsvY51P159B05BJcunQQEAndXIcx0HUiCp
3sbGvqiFhJf4mr/64iT3zZYi9V6shgo=
=XUFz
-----END PGP SIGNATURE-----
Merge tag 'random-fixes-6.6_2023-10-11' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-fixesD
xfs: random fixes for 6.6
Rollup of a couple of reviewed fixes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'random-fixes-6.6_2023-10-11' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: process free extents to busy list in FIFO order
xfs: adjust the incore perag block_count when shrinking
Create a new file intel_hdcp_gsc_message that contain functions
which fill the hdcp messages we send to gsc cs this refactor will
help us reuse code for Xe later on
--v2
-add the missed file for proper build
--v3
-use forward declarations instead of #includes [Jani]
--v4
-move linux/err.h to intel_hdcp_gsc_message.c from
intel_hdcp_gsc_message.h [Jani]
--v5
-move linux include on top of drm includes [Uma]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009095537.653619-3-suraj.kandpal@intel.com
Move checks for gsc components required for HDCP 2.2
to work into intel_hdcp_gsc.c. This will also help
with XE refactor on HDCP's side.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009095537.653619-2-suraj.kandpal@intel.com
The brcmstb-avs-cpufreq driver is considered a legacy driver and since
2018, ARCH_BRCMSTB systems have been using scmi-cpufreq. As a matter of
fact, when SCMI is in use, brcmstb-avs-cpufreq is unusable since the
SCMI firmware takes over, this can result in various problems, including
external synchronous aborts.
Express those constraints such that the driver is not enabled by default
when SCMI CPU frequency scaling is in use.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The am62p5 is a variation of the am625 and the am62a7 SoC families. Add
the am62p5 to the list using the same cpufreq data as the rest of the
am62x extended family.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The am62p5 family of SoCs is a variation of the am625 and am62a7 SoC
family. Add this device along with the devices which will use the
operating-points-v2 property.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-----BEGIN PGP SIGNATURE-----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=pmbB
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for next
First 5 patches, from Phil Sutter, clean up nftables dumpers to
use the context buffer in the netlink_callback structure rather
than a kmalloc'd buffer.
Patch 6, from myself, zaps dead code and replaces the helper function
with a small inlined helper.
Patch 7, also from myself, removes another pr_debug and replaces it
with the existing nf_log-based debug helpers.
Last patch, from George Guo, gets nft_table comments back in
sync with the structure members.
* tag 'nf-next-23-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: cleanup struct nft_table
netfilter: conntrack: prefer tcp_error_log to pr_debug
netfilter: conntrack: simplify nf_conntrack_alter_reply
netfilter: nf_tables: Don't allocate nft_rule_dump_ctx
netfilter: nf_tables: Carry s_idx in nft_rule_dump_ctx
netfilter: nf_tables: Carry reset flag in nft_rule_dump_ctx
netfilter: nf_tables: Drop pointless memset when dumping rules
netfilter: nf_tables: Always allocate nft_rule_dump_ctx
====================
Link: https://lore.kernel.org/r/20231010145343.12551-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than in range of [0, max_file_blocks()), since data after EOF
is alwasy zero, it's unnecessary to preload mapping info of the data.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Replace if condition of napi_schedule_prep/__napi_schedule and use bool
from napi_schedule directly where possible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
