The testcase "Object code reading" fails in somecases
for "fs_something" sub test as below:
Reading object code for memory address: 0xc008000007f0142c
File is: /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
On file address is: 0x1114cc
Objdump command is: objdump -z -d --start-address=0x11142c --stop-address=0x1114ac /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
objdump read too few bytes: 128
test child finished with -1
This can alo be reproduced when running perf record with
workload that exercises fs_something() code. In the test
setup, this is exercising xfs code since root is xfs.
# perf record ./a.out
# perf report -v |grep "xfs.ko"
0.76% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007de5efc B [k] xlog_cil_commit
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007d5ae18 B [k] xfs_btree_key_offset
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007e11fd4 B [k] 0x0000000000112074
Here addr "0xc008000007e11fd4" is not resolved. since this is a
kernel module, its offset is from the DSO. Xfs module is loaded
at 0xc008000007d00000
# cat /proc/modules | grep xfs
xfs 2228224 3 - Live 0xc008000007d00000
And size is 0x220000. So its loaded between 0xc008000007d00000
and 0xc008000007f20000. From objdump, text section is:
text 0010f7bc 0000000000000000 0000000000000000 000000a0 2**4
Hence perf captured ip maps to 0x112074 which is:
( ip - start of module ) + a0
This offset 0x112074 falls out .text section which is up to 0x10f7bc
In this case for module, the address 0xc008000007e11fd4 is pointing
to stub instructions. This address range represents the module stubs
which is allocated on module load and hence is not part of DSO offset.
To address this issue in "object code reading", skip the sample if
address falls out of text section and is within the module end.
Use the "text_end" member of "struct dso" to do this check.
To address this issue in "perf report", exploring an option of
having stubs range as part of the /proc/kallsyms, so that perf
report can resolve addresses in stubs range
However this patch uses text_end to skip the stub range for
Object code reading testcase.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update "struct dso" to include new member "is_kmod".
This new field will determine if the file is a kernel
module or not.
To resolve the address from a sample, perf looks at the
DSO maps. In case of address from a kernel module, there
were some address found to be not resolved. This was
observed while running perf test for "Object code reading".
Though the ip falls beteen the start address of the loaded
module (perf map->start ) and end address ( perf map->end),
it was unresolved.
This was happening because in some cases for kernel
modules, address from sample points to stub instructions.
To identify if the DSO is a kernel module, the new field
"is_kmod" is added to "struct dso".
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update "struct dso" to include new member "text_end".
This new field will represent the offset for end of text
section for a dso. For elf, this value is derived as:
sh_size (Size of section in byes) + sh_offset (Section file
offst) of the elf header for text.
For bfd, this value is derived as:
1. For PE file,
section->size + ( section->vma - dso->text_offset)
2. Other cases:
section->filepos (file position) + section->size (size of
section)
To resolve the address from a sample, perf looks at the
DSO maps. In case of address from a kernel module, there
were some address found to be not resolved. This was
observed while running perf test for "Object code reading".
Though the ip falls beteen the start address of the loaded
module (perf map->start ) and end address ( perf map->end),
it was unresolved.
Example:
Reading object code for memory address: 0xc008000007f0142c
File is: /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
On file address is: 0x1114cc
Objdump command is: objdump -z -d --start-address=0x11142c --stop-address=0x1114ac /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
objdump read too few bytes: 128
test child finished with -1
Here, module is loaded at:
# cat /proc/modules | grep xfs
xfs 2228224 3 - Live 0xc008000007d00000
From objdump for xfs module, text section is:
text 0010f7bc 0000000000000000 0000000000000000 000000a0 2**4
Here the offset for 0xc008000007f0142c ie 0x112074 falls out
.text section which is up to 0x10f7bc.
In this case for module, the address 0xc008000007e11fd4 is pointing
to stub instructions. This address range represents the module stubs
which is allocated on module load and hence is not part of DSO offset.
To identify such address, which falls out of text
section and within module end, added the new field "text_end" to
"struct dso".
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch the test program to sleep that makes more sense for system wide
events. Only enable system wide when root or not paranoid. This avoids
failures under some testing conditions like ARM cloud.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230930060206.2353141-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the previous code, there was a memory leak issue where the previously
allocated memory was not freed upon a failed lseek operation. This patch
addresses the problem by releasing the old memory before returning -errno
in case of a lseek failure. This ensures that memory is properly managed
and avoids potential memory leaks.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yangyicong@hisilicon.com
Cc: jonathan.cameron@huawei.com
Link: https://lore.kernel.org/r/20230930072719.1267784-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
if thread A in smb2_write is using work-tcon, other thread B use
smb2_tree_disconnect free the tcon, then thread A will use free'd tcon.
Time
+
Thread A | Thread A
smb2_write | smb2_tree_disconnect
|
|
| kfree(tree_conn)
|
// UAF! |
work->tcon->share_conf |
+
This patch add state, reference count and lock for tree conn to fix race
condition issue.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Why]
The edge-case DISPCLK WDIVIDER changes call stream_enc functions.
But with MPC pipes, downstream pipes have null stream_enc and will
cause crash.
[How]
Only call stream_enc functions for pipes that are OTG master.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some systems with Navi3x dGPU will attempt to use BACO for runtime
PM but fails to resume properly. This is because on these systems
the root port goes into D3cold which is incompatible with BACO.
This happens because in this case dGPU is connected to a bridge between
root port which causes BOCO detection logic to fail. Fix the intent of
the logic by looking at root port, not the immediate upstream bridge for
_PR3.
Cc: stable@vger.kernel.org
Suggested-by: Jun Ma <Jun.Ma2@amd.com>
Tested-by: David Perry <David.Perry@amd.com>
Fixes: b10c1c5b3a ("drm/amdgpu: add check for ACPI power resources")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While aligning SMU11 with SMU13 implementation an assumption was made that
`dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization
like in SMU13 but it isn't.
So restore some of the original logic and instead just check for
amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode
values; erring on the side of performance.
Cc: stable@vger.kernel.org # 6.1+
Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382
Fixes: e701156ccc ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a memory leak in amdgpu_fru_get_product_info().
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Fixes: 0dbf2c5626 ("drm/amdgpu: Interpret IPMI data for product information (v2)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a race condition issue between parallel smb2 lock request.
Time
+
Thread A | Thread A
smb2_lock | smb2_lock
|
insert smb_lock to lock_list |
spin_unlock(&work->conn->llist_lock) |
|
| spin_lock(&conn->llist_lock);
| kfree(cmp_lock);
|
// UAF! |
list_add(&smb_lock->llist, &rollback_list) +
This patch swaps the line for adding the smb lock to the rollback list and
adding the lock list of connection to fix the race issue.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If parallel smb2 logoff requests come in before closing door, running
request count becomes more than 1 even though connection status is set to
KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever.
This patch fix race condition problem by returning error if connection
status was already set to KSMBD_SESS_NEED_RECONNECT.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
drop reference after use opinfo.
Signed-off-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
fp can used in each command. If smb2_close command is coming at the
same time, UAF issue can happen by race condition.
Time
+
Thread A | Thread B1 B2 .... B5
smb2_open | smb2_close
|
__open_id |
insert fp to file_table |
|
| atomic_dec_and_test(&fp->refcount)
| if fp->refcount == 0, free fp by kfree.
// UAF! |
use fp |
+
This patch add f_state not to use freed fp is used and not to free fp in
use.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference variable
was not reset after the analysis of a timerlat activation that did not
hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ latency
reported by timerlat, and the timestamp from IRQ handler start event.
If the delta is near-zero, the drift from the external clock and the
trace event and/or the overhead can cause the value to be negative.
If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before the
*current* IRQ occurrence. Ignore Previous IRQ noise in this condition
because they are valid only for the *next* timerlat activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only,
if all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page.
-----BEGIN PGP SIGNATURE-----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=1BAc
-----END PGP SIGNATURE-----
Merge tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux
Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.
Timerlat auto-analysis:
- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference
variable was not reset after the analysis of a timerlat activation
that did not hit the threshold.
- The IRQ handler delay is estimated from the delta of the IRQ
latency reported by timerlat, and the timestamp from IRQ handler
start event. If the delta is near-zero, the drift from the external
clock and the trace event and/or the overhead can cause the value
to be negative. If the value is negative, print a zero-delay.
- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before
the *current* IRQ occurrence. Ignore Previous IRQ noise in this
condition because they are valid only for the *next* timerlat
activation.
Timerlat user-space:
- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only, if
all threads leave because the CPUs become/are offline.
man-pages:
- Fix command line example in timerlat hist man page"
* tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux:
rtla: fix a example in rtla-timerlat-hist.rst
rtla/timerlat: Do not stop user-space if a cpu is offline
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
rtla/timerlat_aa: Fix negative IRQ delay
rtla/timerlat_aa: Zero thread sum after every sample analysis
Jakub Kicinski says:
====================
ynl Makefile cleanup
While catching up on recent changes I noticed unexpected
changes to Makefiles in YNL. Indeed they were not working
as intended but the fixes put in place were not what I had
in mind :)
====================
Link: https://lore.kernel.org/r/20231003153416.2479808-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Makefile.deps provides direct includes in CFLAGS_$(obj).
We just need to rewrite the rules to make use of the extra
flags, no need to hard-include all of tools/include/uapi.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As far as I can tell the normal Makefile dependency tracking
works, generated files get re-generated if the YAML was updated.
Let make do its job, don't force the re-generation.
make hardclean can be used to force regeneration.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enum-as-flags can be used when enum declares bit positions but
we want to carry bitmask in an attribute. If the definition
is already provided as flags there's no need to indicate
the flag-iness of the attribute.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Exit early if the list is empty.
2) splice the list into a local list,
so that we block hard irqs only once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231003181920.3280453-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when hb_interval is changed by users, it won't take effect
until the next expiry of hb timer. As the default value is 30s, users
have to wait up to 30s to wait its hb_interval update to work.
This becomes pretty bad in containers where a much smaller value is
usually set on hb_interval. This patch improves it by resetting the
hb timer immediately once the value of hb_interval is updated by users.
Note that we don't address the already existing 'problem' when sending
a heartbeat 'on demand' if one hb has just been sent(from the timer)
mentioned in:
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the 4-way handshake, the transport's state is set to ACTIVE in
sctp_process_init() when processing INIT_ACK chunk on client or
COOKIE_ECHO chunk on server.
In the collision scenario below:
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021]
when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state,
sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it
creates a new association and sets its transport to ACTIVE then updates
to the old association in sctp_assoc_update().
However, in sctp_assoc_update(), it will skip the transport update if it
finds a transport with the same ipaddr already existing in the old asoc,
and this causes the old asoc's transport state not to move to ACTIVE
after the handshake.
This means if DATA retransmission happens at this moment, it won't be able
to enter PF state because of the check 'transport->state == SCTP_ACTIVE'
in sctp_do_8_2_transport_strike().
This patch fixes it by updating the transport in sctp_assoc_update() with
sctp_assoc_add_peer() where it updates the transport state if there is
already a transport with the same ipaddr exists in the old asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-10-03 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Yajun Deng aligns reporting of buffer exhaustion statistics to follow
documentation for i40e.
Jake removes undesired 'inline' from functions in iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: remove "inline" functions from iavf_txrx.c
i40e: Add rx_missed_errors for buffer exhaustion
====================
Link: https://lore.kernel.org/r/20231003223610.2004976-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Chancellor says:
====================
Fix a couple recent instances of -Wincompatible-function-pointer-types-strict from ->mode_get() implementations
This series fixes a couple of instances of
-Wincompatible-function-pointer-types-strict that were introduced by a
recent series that added a new type of ops, struct dpll_device_ops,
along with implementations of the callback ->mode_get() that had a
mismatched mode type.
This warning is not currently enabled for any build but I am planning on
submitting a patch to add it to W=1 to prevent new instances of the
warning from popping up while we try and fix the existing instances in
other drivers.
This series is based on current net-next but if they need to go into
individual maintainer trees, please feel free to take the patches
individually.
====================
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-0-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch potential kCFI failures at build time rather
than run time due to incorrect function pointer types, there is a
warning due to a mismatch between the type of the mode parameter in
mlx5_dpll_device_mode_get() vs. what the function pointer prototype for
->mode_get() in 'struct dpll_device_ops' expects.
drivers/net/ethernet/mellanox/mlx5/core/dpll.c:141:14: error: incompatible function pointer types initializing 'int (*)(const struct dpll_device *, void *, enum dpll_mode *, struct netlink_ext_ack *)' with an expression of type 'int (const struct dpll_device *, void *, u32 *, struct netlink_ext_ack *)' (aka 'int (const struct dpll_device *, void *, unsigned int *, struct netlink_ext_ack *)') [-Werror,-Wincompatible-function-pointer-types-strict]
141 | .mode_get = mlx5_dpll_device_mode_get,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Change the type of the mode parameter in mlx5_dpll_device_mode_get() to
clear up the warning and avoid kCFI failures at run time.
Fixes: 496fd0a26b ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-2-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch potential kCFI failures at build time rather
than run time due to incorrect function pointer types, there is a
warning due to a mismatch between the type of the mode parameter in
ptp_ocp_dpll_mode_get() vs. what the function pointer prototype for
->mode_get() in 'struct dpll_device_ops' expects.
drivers/ptp/ptp_ocp.c:4353:14: error: incompatible function pointer types initializing 'int (*)(const struct dpll_device *, void *, enum dpll_mode *, struct netlink_ext_ack *)' with an expression of type 'int (const struct dpll_device *, void *, u32 *, struct netlink_ext_ack *)' (aka 'int (const struct dpll_device *, void *, unsigned int *, struct netlink_ext_ack *)') [-Werror,-Wincompatible-function-pointer-types-strict]
4353 | .mode_get = ptp_ocp_dpll_mode_get,
| ^~~~~~~~~~~~~~~~~~~~~
1 error generated.
Change the type of the mode parameter in ptp_ocp_dpll_mode_get() to
clear up the warning and avoid kCFI failures at run time.
Fixes: 09eeb3aecc ("ptp_ocp: implement DPLL ops")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-1-a356a16413cf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows f2fs to support cases where the block size = page size for
both 4K and 16K block sizes. Other sizes should work as well, should the
need arise. This does not currently support 4K Block size filesystems if
the page size is 16K.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Hayes Wang says:
====================
r8152: modify rx_bottom
v3:
For patch #1, this patch is replaced. The new patch only break the loop,
and keep that the driver would queue the rx packets.
For patch #2, modify the code depends on patch #1. For work_down < budget,
napi_get_frags() and napi_gro_frags() would be used. For the others,
nothing is changed.
v2:
For patch #1, add comment, update commit message, and add Fixes tag.
v1:
These patches are used to improve rx_bottom().
====================
Link: https://lore.kernel.org/r/20230926111714.9448-432-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bulk transfer of the USB may contain many packets. And, the total
number of the packets in the bulk transfer may be more than budget.
Originally, only budget packets would be handled by napi_gro_receive(),
and the other packets would be queued in the driver for next schedule.
This patch would break the loop about getting next bulk transfer, when
the budget is exhausted. That is, only the current bulk transfer would
be handled, and the other bulk transfers would be queued for next
schedule. Besides, the packets which are more than the budget in the
current bulk trasnfer would be still queued in the driver, as the
original method.
In addition, a bulk transfer wouldn't contain more than 400 packets, so
the check of queue length is unnecessary. Therefore, I replace it with
WARN_ON_ONCE().
Fixes: cf74eb5a5b ("eth: r8152: try to use a normal budget")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230926111714.9448-433-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Publish max operating temperature of SOC and memory as temp*_emergency
nodes in hwmon. temp*_crit will show the throttle temperature limits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CTF limit represents the max operating temperature and thermal limit
gives the limit at which throttling starts. Add support for both limits.
SOC and HBM may have different limit values.*_emergency_max gives max
operating temperature and *_crit_max value represents throttle limit.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC v3.2.254
* Stability fixes through null pointer checks, blackscreen fixes on
certain configurations
* Improvements for various functionality like Idle optimization, ILR, DSC, IPS
* Fixes for ILR functionality
* Trivial code cleanups
===================================================================
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Make some formatting changes and rearranging of definitions for consistency.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
* Add hints about the bits used in the packed struct.
* Update new bitfields for ABM and IPS
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need a helper function to check idle power is allowed
so that dc doesn't access any registers that are power-gated.
[how]
Implement helper function to check idle power optimization.
Enable a hook to check if detection is allowed.
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Clip size increase will increase viewport, which could cause us to
switch to MPC combine.
If we skip full update, we are not able to change to MPC combine in
fast update. This will cause corruption showing on the video plane.
[how]
treat clip size increase of a surface larger than 5k as a full update.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix constness of string parameters
- Fix zero-initialization of structs which cannot take a 0 literal as the
first field, for example enums
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver needs to be compatible with PM FW that doesn't support IPS
[how]
Toggle internal control flag
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current ILR toggle is on/off as a part of panel
config for new function, which breaks original
ILR logic
[How]
Refactor ILR and take panel config into account
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sherry Wang <yao.wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
enable_accelerated_mode function is fully to check
whether fastboot support or not.
It is no longer to disable_vbios_mode_if_required.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The edge-case DISPCLK WDIVIDER changes call stream_enc functions.
But with MPC pipes, downstream pipes have null stream_enc and will
cause crash.
[How]
Only call stream_enc functions for pipes that are OTG master.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to enable dsc_clk regardless dsc_pg
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there is no VRAM domain, bo_node is NULL and this causes crash.
Refactor the change, and use the module parameter as higher privilege.
Need another patch to support override PTE flag on APU.
Fixes: 5f248462c6 ("drm/amdgpu: Add EXT_COHERENT memory allocation flags")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ratelimited version of dev_dbg to avoid flooding dmesg log. No
functional change.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what and why]
Check whether dpp resource pointer is null in advance and return early
if so.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
