Modify ata_pci_shutdown_one() to schedule EH to unload a port devices
before freezing and thawing the port. This ensures that drives are
cleanly disabled and transitioned to standby power mode when
a PCI adapter is removed or the system is powered off.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The call to async_synchronize_cookie() to synchronize a port removal
and hotplug probe is done in ata_host_detach() right before calling
ata_port_detach(). Move this call at the beginning of ata_port_detach()
to ensure that this operation is always synchronized with probe.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that libata does its own internal device power mode management
through libata EH, the scsi disk driver will not issue START STOP UNIT
commands anymore. We can receive this command only from user passthrough
operations. So there is no need to consider the system state and ATA
port flags for suspend to translate the command.
Since setting up the taskfile for the verify and standby
immediate commands is the same as done in ata_dev_power_set_active()
and ata_dev_power_set_standby(), factor out this code into the helper
function ata_dev_power_init_tf() to simplify ata_scsi_start_stop_xlat()
as well as ata_dev_power_set_active() and ata_dev_power_set_standby().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The scsi device flag no_start_on_resume is not set by any scsi low
level driver. Remove it. This reverts the changes introduced by commit
0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume").
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ata_cpr_log.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add support for PCIe SATA adapter cards based on Asmedia 2116 controllers.
These cards can provide up to 10 SATA ports on PCIe card.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The target LPM policy can be set using either a Kconfig or a kernel module
parameter.
However, if the board type is set to anything but board_ahci_low_power,
then the LPM policy will overridden and set to ATA_LPM_UNKNOWN.
Additionally, if the default suspend is suspend to idle, depending on the
hardware capabilities of the HBA, ahci_update_initial_lpm_policy() might
override the LPM policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or
ATA_LPM_MIN_POWER.
All this means that it is very hard to know which LPM policy a user will
actually be using on a given system.
In order to make it easier to debug LPM related issues, print the LPM
policy on boot.
One common LPM related issue is that the device fails to link up.
Because of that, we cannot add this print to ata_dev_configure(), as that
function is only called after a successful link up. Instead, add the info
using ata_port_desc(), with the help of a new ata_port_desc_misc() helper.
The port description is printed once per port during boot.
Before changes:
ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170
ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170
After changes:
ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 lpm-pol 4
ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 lpm-pol 4
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This function is overly convoluted with a goto error path, and checks
under the mmap_read_lock() that don't need to be at all. Rearrange it
a bit so the checks and errors fall out naturally, rather than needing
to jump around for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chuck Lever says:
====================
Fix implicit sign conversions in handshake upcall
An internal static analysis tool noticed some implicit sign
conversions for some of the arguments in the handshake upcall
protocol.
====================
Link: https://lore.kernel.org/r/169530154802.8905.2645661840284268222.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
key_serial_t fields are signed integers. Use nla_get/put_s32 for
those to avoid implicit signed conversion in the netlink protocol.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/169530167716.8905.645746457741372879.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket file descriptors are signed integers. Use nla_get/put_s32 for
those to avoid implicit signed conversion in the netlink protocol.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/169530165057.8905.8650469415145814828.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hyper-V has usecases where it needs to fetch NUMA information from
Devicetree. Currently, it is not possible to extract the NUMA information
from Devicetree for the x86 arch.
Add support for Devicetree in the x86_numa_init() function, allowing the
retrieval of NUMA node information from the Devicetree.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/1692949657-16446-2-git-send-email-ssengar@linux.microsoft.com
Fetching the device tree configuration before initmem_init() is necessary
to allow the parsing of NUMA node information. However moving the entire
x86_dtb_init() call before initmem_init() is not correct as APIC/IO-APIC enumeration
has to be after initmem_init().
Thus, move the x86_flattree_get_config() call out of x86_dtb_init(),
into setup_arch(), to call it before initmem_init(), and
leave the ACPI/IOAPIC registration sequence as-is.
[ mingo: Updated the changelog for clarity. ]
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/1692949657-16446-1-git-send-email-ssengar@linux.microsoft.com
Both glibc and musl define 'struct sched_param' in sched.h, while kernel
has it in uapi/linux/sched/types.h, making it cumbersome to use
sched_getattr(2) or sched_setattr(2) from userspace.
For example, something like this:
#include <sched.h>
#include <linux/sched/types.h>
struct sched_attr sa;
will result in "error: redefinition of ‘struct sched_param’" (note the
code doesn't need sched_param at all -- it needs struct sched_attr
plus some stuff from sched.h).
The situation is, glibc is not going to provide a wrapper for
sched_{get,set}attr, thus the need to include linux/sched_types.h
directly, which leads to the above problem.
Thus, the userspace is left with a few sub-par choices when it wants to
use e.g. sched_setattr(2), such as maintaining a copy of struct
sched_attr definition, or using some other ugly tricks.
OTOH, 'struct sched_param' is well known, defined in POSIX, and it won't
be ever changed (as that would break backward compatibility).
So, while 'struct sched_param' is indeed part of the kernel uapi,
exposing it the way it's done now creates an issue, and hiding it
(like this patch does) fixes that issue, hopefully without creating
another one: common userspace software rely on libc headers, and as
for "special" software (like libc), it looks like glibc and musl
do not rely on kernel headers for 'struct sched_param' definition
(but let's Cc their mailing lists in case it's otherwise).
The alternative to this patch would be to move struct sched_attr to,
say, linux/sched.h, or linux/sched/attr.h (the new file).
Oh, and here is the previous attempt to fix the issue:
https://lore.kernel.org/all/20200528135552.GA87103@google.com/
While I support Linus arguments, the issue is still here
and needs to be fixed.
[ mingo: Linus is right, this shouldn't be needed - but on the other
hand I agree that this header is not really helpful to
user-space as-is. So let's pretend that
<uapi/linux/sched/types.h> is only about sched_attr, and
call this commit a workaround for user-space breakage
that it in reality is ... Also, remove the Fixes tag. ]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230808030357.1213829-1-kolyshkin@gmail.com
The DT bindings for MT6366 regulator defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply whose name
can be derived from the regulator name. The LDOs have shared supplies.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-12-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When support for the MT6366 PMIC regulators was added, it was assumed
that it had the same functionality as MT6358. In reality there are
differences. A few regulators have different ranges, or were renamed
and repurposed, or removed altogether.
Add the 3 regulators that were missing from the original submission.
These are added for completeness. VSRAM_CORE is not used in existing
projects. VM18 and VMDDR feed DRAM related consumers, and are not used
in-kernel.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The VCN18 regulator on the MT6366 (only) actually has a wide
configurable range of voltages, even though its name suggests a fixed
output voltage.
Convert it from a fixed LDO to a configurable LDO. Its range of settings
is the same as the VM18 regulator, which is missing and will be added in
a subsequent patch.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The new MT6366 binding does away with the type prefix ("buck_", "ldo_")
in the regulator node names. This better matches the PMIC pin names.
Remaining underscores in names are also replaced with hyphens.
Drop the type prefixes and replace remaining underscores to match the
MT6366 binding.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT bindings for MT6358 regulator now defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The (undocumented) possible values for the buck operating modes on the
MT6358 are the same as those on the MT6397, both for the device tree
bindings and the actual hardware register values.
Reuse the macros for the MT6397 PMIC in the MT6358 regulator driver by
including the mt6397-regulator.h binding header and replacing the
existing macros. This aligns it with other PMIC.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
29 LDO regulators, not counting ones that feed internally and basically
have no controls. The regulators are named after their intended usage
for the SoC and system design, thus not named generically as ldoX or
dcdcX, but as vcn33 or vgpu.
The differences compared to the MT6358 are minimal:
- Regulators removed: VCAMA1, VCAMA2, VCAMD, VCAMIO, VLDO28
- Regulators added: VM18, VMDDR, VSRAM_CORE
Both PMIC models contain a chip ID register at the same address that
can be used to differentiate the actual model. Thus, even though the
MT6366 is not fully backward compatible with the MT6358, it still falls
back on the MT6358 compatible string. It is up to the implementation
to use the chip ID register as a probing mechanism.
Update the MT6358 regulator binding and add entries for all the MT6366's
regulators and their supplies. The regulator node names follow a cleaned
up style without type prefixes and with underscores replaced with hyphens.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
[wens@chromium.org: major rework and added commit message]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6358 PMIC has various regulator power supply pins that should be
supplied from external power sources or routed from one of its outputs.
Add these regulator supplies to the binding. The names are the actual
names from the datasheet, with hyphens replacing underscores.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6358 PMIC allows changing operating modes for the buck regulators,
but not the LDOs. Existing device trees and the Linux implementation
already utilize this through the standard regulator-allowed-modes
property.
The values currently used in existing device trees are simply raw
numbers. The values in the Linux driver are matching numbers defined
with macros denoting the two supported modes. Turns out these two
modes are common across parts of the larger MT63xx PMIC family. The
MT6397 regulator binding already has macros for the two modes, with
matching numbers.
Codify the supported values for regulator-allowed-modes for the MT6358
in the device tree binding: 0 and 1 are supported for buck regulators,
and the property should not be present for LDO regulators. Users should
use the dt-bindings/regulator/mediatek,mt6397-regulator.h header for
the macros, instead of using raw numbers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert this from the old style text based binding to the new DT schema
style. This will make adding the MT6366 portion easier.
The examples have been trimmed down considerably, and the remaining
entries now match what is seen in actual device trees, minus some
properties that aren't covered by the bindings yet, or don't make
sense on their own.
The original submitter seems to have left MediaTek, so instead the
submitter and maintainer for the MT6366 binding is listed as the
maintainer here.
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS5754/6 power amplifiers use the same pcm512x driver with
only minor restictions described in the bindings document.
Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929150555.405388-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enables the existing pcm512x driver to control the almost
compatible TAS5754 and -76 amplifers. Both amplifiers support
only an I2C interface and the internal PLL must be always
on to provide necessary clocks to the amplifier section.
Tested on TAS5756 with support from Andreas Arbesser-Krasser
from Texas Instruments <a-krasser@ti.com>
Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Link: https://lore.kernel.org/r/20230929150722.405415-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the AW88261 datasheet (V1.1) and device schematics I have
access to, there is no reset gpio present on the AW88261. Remove it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-2-837cb1e7b95c@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AW88261 chip doesn't have a reset GPIO, so disallow providing
reset-gpios.
At the same time also don't keep reset-gpios required for AW88395. This
is both because the Linux driver has it optional, and it also simplifies
the bindings by not introducing another conditional.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-1-837cb1e7b95c@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230925095532.1984344-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230925095532.1984344-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230925095532.1984344-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Kees Cook says:
====================
mlxsw: Annotate structs with __counted_by
This annotates several mlxsw structures with the coming __counted_by attribute
for bounds checking of flexible arrays at run-time. For more details, see
commit dd06e72e68 ("Compiler Attributes: Add __counted_by macro").
====================
Link: https://lore.kernel.org/r/20230929180611.work.870-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_span.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Petr Machata <petrm@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230929180746.3005922-5-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_nexthop_group_info.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Petr Machata <petrm@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230929180746.3005922-4-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_counter_pool.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Petr Machata <petrm@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230929180746.3005922-3-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mlxsw_env.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Petr Machata <petrm@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230929180746.3005922-2-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mlxsw_linecards.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Petr Machata <petrm@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230929180746.3005922-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook says:
====================
Batch 1: Annotate structs with __counted_by
This is the batch 1 of patches touching netdev for preparing for
the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by to structs that would
benefit from the annotation.
Since the element count member must be set before accessing the annotated
flexible array member, some patches also move the member's initialization
earlier. (These are noted in the individual patches.)
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
====================
Link: https://lore.kernel.org/r/20230922172449.work.906-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
