This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes: 22c5883435 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid
[note: patch looks bigger than it is due to reindentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Many regulatories can have HE/EHT Operation as not permitted. In such
cases, AP should not be allowed to start if it is using a channel
having the no operation flag set. However, currently there is no such
check in place.
Fix this issue by validating such IEs sent during start AP against the
channel flags.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh_fast_tx_flush_addr() we already hold the lock, so
don't need additional hashtable RCU protection. Use the
rhashtable_lookup_fast() variant to avoid RCU protection
warnings.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. Following the ARM SMC32 calling convention, the return value
from secure monitor is a 32-bit signed integer. This patch changes
the type of the return value of the function meson_sm_call().
2. Now, when meson_sm_call() returns a 32-bit signed integer, we need
to ensure that this value is not negative. It is important to check
that the return value is not negative in both the meson_sm_call_read()
and meson_sm_call_write() functions.
3. Add a comment explaining why it is necessary to check if the SMC
return value is equal to 0 in the function meson_sm_call_read().
It is not obvious when reading this code.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230830140850.17130-1-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the compatible for the Amlogic A1 Based AD402 board.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-16-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Meson A1 SoC:
soc soc0: Amlogic Meson A1 (A113L) Revision 2c:a (1:a) Detected
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-14-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The definition is inspired by a similar one for AXG SoC family.
'sdio_pins' and 'sdio_clk_gate_pins' pinctrls are supposed to be used as
"default" and "clk-gate" in board-specific device trees.
During initialization 'meson-gx' driver sets clock to safe low-frequency
value (400kHz). However, both source clocks ("clkin0" and "clkin1") are
high-frequency by default, and using of eMMC's internal divider is not
enough to achieve so low values. To provide low-frequency source,
reparent "sd_emmc_sel2" clock using 'assigned-clocks' property.
Signed-off-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-11-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Amlogic A1 has a UART_AO port, which can be used, for example, for
BT HCI H4 connection.
This patch adds mux definitions for it.
Signed-off-by: Oleg Lyovin <ovlevin@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-10-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This controller can be used for spinand flash connection.
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-9-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Amlogic A1 SoC family has USB2.0 controller based on dwc2 and dwc3
heads. It supports otg/host/peripheral modes.
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-7-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This patch adds clkc and clkc_pll dts nodes to A1 SoC main dtsi. The
first one is responsible for all SoC peripherals clocks excluding audio
clocks. The second one is used by A1 SoC PLLs. Actually, there are two
different APB heads, so we have two different drivers.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-6-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It is recommended to maintain a sorted order of device tree entries, so
move the gpio_intc node ahead of the uart_AO node.
Fixes: ea254644a2 ("arm64: dts: meson-a1: add gpio_intc node")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-5-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In the file 'meson-a1.dtsi,' which is a basic device tree include, it is
not necessary to mark the node with 'status = "okay"' because it is
enabled by default.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-4-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
There should be only one empty line between device tree node
definitions.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-3-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It is recommended to alphabetically sort all headers included in the
dtsi.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-2-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the IR controller device of Meson-S4 SoC family.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230825115310.39993-4-zelong.dong@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
MT7988 SoC support 3 NICs. Fix pse_port configuration in
mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
Rely on mtk_pse_port definitions.
Fixes: 88efedf517 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable dma_addr in function mtk_poll_rx can be uninitialized on
some of the error paths. In practise this doesn't matter, even random
data present in uninitialized stack memory can safely be used in the
way it happens in the error path.
However, in order to make Smatch happy make sure the variable is
always initialized.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The perf power scale value would currently be reported as bogowatts if the
platform firmware supports microwatt power scale and meets the perf major
version requirements. Fix this by populating version information in the
driver private data before the call to protocol attributes is made.
CC: Chandra Sekhar Lingutla <quic_lingutla@quicinc.com>
Fixes: 3630cd8130 ("firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230811204818.30928-1-quic_sibis@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the platform acknowledge interrupt is level triggered, then it can
be shared by multiple subspaces provided each one has a unique platform
interrupt ack preserve and ack set masks.
If it can be shared, then we can request the irq with IRQF_SHARED and
IRQF_ONESHOT flags. The first one indicating it can be shared and the
latter one to keep the interrupt disabled until the hardirq handler
finished.
Further, since there is no way to detect if the interrupt is for a given
channel as the interrupt ack preserve and ack set masks are for clearing
the interrupt and not for reading the status(in case Irq Ack register
may be write-only on some platforms), we need a way to identify if the
given channel is in use and expecting the interrupt.
PCC type0, type1 and type5 do not support shared level triggered interrupt.
The methods of determining whether a given channel for remaining types
should respond to an interrupt are as follows:
- type2: Whether the interrupt belongs to a given channel is only
determined by the status field in Generic Communications Channel
Shared Memory Region, which is done in rx_callback of PCC client.
- type3: This channel checks chan_in_use flag first and then checks the
command complete bit(value '1' indicates that the command has
been completed).
- type4: Platform ensure that the default value of the command complete
bit corresponding to the type4 channel is '1'. This command
complete bit is '0' when receive a platform notification.
The new field, 'chan_in_use' is used by the type only support the
communication from OSPM to Platform (like type3) and should be completely
ignored by other types so as to avoid too many type unnecessary checks in
IRQ handler.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20230801063827.25336-3-lihuisong@huawei.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, PCC driver doesn't support the processing of platform
notification for type 4 PCC subspaces.
According to ACPI specification, if platform sends a notification
to OSPM, it must clear the command complete bit and trigger platform
interrupt. OSPM needs to check whether the command complete bit is
cleared, clear platform interrupt, process command, and then set the
command complete and ring doorbell to the Platform.
Let us stash the value of the pcc type and use the same while processing
the interrupt of the channel. We also need to set the command complete
bit and ring doorbell in the interrupt handler for the type 4 channel to
complete the communication flow after processing the notification from
the Platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20230801063827.25336-2-lihuisong@huawei.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There were are a number of cases in mac80211 and iwlwifi (at
least) that used the sband->iftype_data pointer directly,
instead of using the accessors to find the right array entry
to use.
Make sparse warn when such a thing is done.
To not have a lot of casts, add two helper functions/macros
- ieee80211_set_sband_iftype_data()
- for_each_sband_iftype_data()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As previously reported by Alexander, whose commit 69403bad97
("wifi: mac80211: sdata can be NULL during AMPDU start") I'm
reverting as part of this commit, there's a race between station
destruction and aggregation setup, where the aggregation setup
can happen while the station is being removed and queue the work
after ieee80211_sta_tear_down_BA_sessions() has already run in
__sta_info_destroy_part1(), and thus the worker will run with a
now freed station. In his case, this manifested in a NULL sdata
pointer, but really there's no guarantee whatsoever.
The real issue seems to be that it's possible at all to have a
situation where this occurs - we want to stop the BA sessions
when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA
isn't necessarily effective since we don't know that the setup
isn't concurrently running and already got past the check.
Simply call ieee80211_sta_tear_down_BA_sessions() again in the
second part of station destruction, since at that point really
nothing else can hold a reference to the station any more.
Also revert the sdata checks since those are just misleading at
this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/virtual/mac80211_hwsim.c:18:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'mac80211_hwsim_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy the
whole 'mac80211_hwsim_gstrings_stats' array from its first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230829094140.234636-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently call ieee80211_txq_teardown_flows() as part
of ieee80211_remove_interfaces(), but that's not really
right in case of HW registration failures, specifically
rate control. Call it separately to fix that issue.
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the iflist_mtx, so we don't need this mutex any
more in mac80211. However, drivers may also iterate,
and in some cases (e.g. mt76) do so from high-priority
contexts. Thus, keep the mutex around but remove its
usage in mac80211 apart from those driver-visible parts
that are still needed.
Most of this change was done automatically with spatch,
with the parts that are still needed as described above
reverted manually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the local->mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the A-MPDU locking, so we don't need this mutex
any more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the chanctx_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the key_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the sta_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to ensure everything holds the wiphy lock,
so also extend that to the MAC change callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to extend the wiphy locking to the interface list,
so move that into the section locked with the wiphy lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
