Commit b81a3a100c ("tracing/histogram: Add simple tests for
stacktrace usage of synthetic events") changed the output text in
tracefs README, but missed updating some of the dependencies specified
in selftests. This causes some of the tests to exit as unsupported.
Fix this by changing the grep pattern. Since we want these tests to work
on older kernels, match only against the common last part of the
pattern.
Link: https://lore.kernel.org/linux-trace-kernel/20230614091046.2178539-1-naveen@kernel.org
Cc: <linux-kselftest@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Fixes: b81a3a100c ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that eventfs structure is used to create the events directory via the
eventfs dynamically allocate code, the "dir" field of the trace_event_file
structure is no longer used. Remove it.
Link: https://lkml.kernel.org/r/20230908022001.580400115@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The check to create the print event "trigger" was using the obsolete "dir"
value of the trace_event_file to determine if it should create the trigger
or not. But that value will now be NULL because it uses the event file
descriptor.
Change it to test the "ef" field of the trace_event_file structure so that
the trace_marker "trigger" file appears again.
Link: https://lkml.kernel.org/r/20230908022001.371815239@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 27152bceea ("eventfs: Move tracing/events to eventfs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.
To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This cast was made by purpose for older libbpf where the
bpf_object_skeleton field is void * instead of const void *
to eliminate a warning (as i understand
-Wincompatible-pointer-types-discards-qualifiers) but this
cast introduces another warning (-Wcast-qual) for libbpf
where data field is const void *
It makes sense for bpftool to be in sync with libbpf from
kernel sources
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
Rong Tao says:
====================
We need to optimize the kallsyms cache, including optimizations for the
number of symbols limit, and, some test cases add new kernel symbols
(such as testmods) and we need to refresh kallsyms (reload or refresh).
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU
0X00000004 instead of 0x00000004
make it consistent
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Adding test that tries to attach program with bpf_override_return
helper to function not within error injection list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org
Currently the multi_kprobe link attach does not check error
injection list for programs with bpf_override_return helper
and allows them to attach anywhere. Adding the missing check.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20230907200652.926951-1-jolsa@kernel.org
Static ksyms often have problems because the number of symbols exceeds the
MAX_SYMS limit. Like changing the MAX_SYMS from 300000 to 400000 in
commit e76a014334a6("selftests/bpf: Bump and validate MAX_SYMS") solves
the problem somewhat, but it's not the perfect way.
This commit uses dynamic memory allocation, which completely solves the
problem caused by the limitation of the number of kallsyms. At the same
time, add APIs:
load_kallsyms_local()
ksym_search_local()
ksym_get_addr_local()
free_kallsyms_local()
There are used to solve the problem of selftests/bpf updating kallsyms
after attach new symbols during testmod testing.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/tencent_C9BDA68F9221F21BE4081566A55D66A9700A@qq.com
Rather than applying display workarounds as part of
intel_clock_gating_init() (which in turn is confusingly called from
i915_gem_init during device probe), handle them at the point we're
actually initializing the display hardware. This will also ensure that
these workarounds are properly applied during display initialization on
the Xe driver, which re-uses i915's display code, but does not call
i915's gem init.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-10-matthew.d.roper@intel.com
Several of the register updates that are currently done in the clock
gating init functions are actually display workarounds that should move
into the display-specific part of the code. Furthermore, some of the
registers being programmed don't even have anything to do with clock
gating at all.
Extract the display workarounds for gen11 and later platforms to a
dedicated display/intel_display_wa.c file to keep these separate from
the SOC / sgunit clock gating that we need on some platforms. The gen11
cutoff here is selected somewhat arbitrarily; this is the point where
workarounds were first assigned dedicated lineage numbers that can be
easily looked up and confirmed in the modern workaround database. It
also avoids any confusion on older platforms where the exact boundaries
between display/GT/other IP blocks wasn't as well-defined as it is
today.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907001009.3732474-2-matthew.d.roper@intel.com
The only programming that happens in gen12lp_init_clock_gating is for
display workarounds that are specific to display version 12 and are not
relevant to ADL-P's display version 13.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-8-matthew.d.roper@intel.com
In the early days of i915, pretty much every platform needed to
initialize _something_ in the clock gating init functions. In some
cases the items initialized were inside the GT (and really should have
been initialized through the GT workaround infrastructure instead).
In other cases they were display programming (sometimes not even related
to "clock gating" at all!) which probably needs to move inside the
display-specific code. The number of initialization tasks that are
truly "clock gating" and don't fall within the GT or display domains is
relatively limited. Let's stop forcing future platforms to always
define a clock gating init hook.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906234732.3728630-7-matthew.d.roper@intel.com
[Why]
Today, the allocation/deallocation steps and status is a bit unclear.
For instance, payload->vc_start_slot = -1 stands for "the failure of
updating DPCD payload ID table" and can also represent as "payload is not
allocated yet". These two cases should be handled differently and hence
better to distinguish them for better understanding.
[How]
Define enumeration - ALLOCATION_LOCAL, ALLOCATION_DFP and ALLOCATION_REMOTE
to distinguish different allocation status. Adjust the code to handle
different status accordingly for better understanding the sequence of
payload allocation and payload removement.
For payload creation, the procedure should look like this:
DRM part 1:
* step 1 - update sw mst mgr variables to add a new payload
* step 2 - add payload at immediate DFP DPCD payload table
Driver:
* Add new payload in HW and sync up with DFP by sending ACT
DRM Part 2:
* Send ALLOCATE_PAYLOAD sideband message to allocate bandwidth along the
virtual channel.
And as for payload removement, the procedure should look like this:
DRM part 1:
* step 1 - Send ALLOCATE_PAYLOAD sideband message to release bandwidth
along the virtual channel
* step 2 - Clear payload allocation at immediate DFP DPCD payload table
Driver:
* Remove the payload in HW and sync up with DFP by sending ACT
DRM part 2:
* update sw mst mgr variables to remove the payload
Note that it's fine to fail when communicate with the branch device
connected at immediate downstrean-facing port, but updating variables of
SW mst mgr and HW configuration should be conducted anyway. That's because
it's under commit_tail and we need to complete the HW programming.
Changes since v1:
* Remove the set but not use variable 'old_payload' in function
'nv50_msto_prepare'. Catched by kernel test robot <lkp@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-3-Wayne.Lin@amd.com
[Why]
There is no need to consider payload->delete case since we won't call
drm_dp_add_payload_part2() to create a payload when we're about to
remove it.
[How]
Delete unnecessary case to simplify the code.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-2-Wayne.Lin@amd.com
fourccs_out array is not initialized. As the
drm_fb_build_fourcc_list() doesn't necessarily change all the array,
and the test compares all of it, the comparison could fail if the
array is not initialized. Zero initialize the array to fix this.
Fixes: 371e0b186a ("drm/tests: Add KUnit tests for drm_fb_build_fourcc_list()")
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901-zero-init-fourcc-list-test-v1-1-68bc4cc738c8@riseup.net
Eliminate an obsolete thermal zone registration function.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmT7ciwSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx7t4P/2inGJikCy2sjJTkQanu9+PBk4IDQDHD
lrAQaSk9Ux+8epKq7AwlPmwDUuGJOetUQUbftBmTv6BS0AJuXTz5Wqcb/OCzteqv
9FbucDj09A5Vz4+KSAsu4Mt+lj4ziLlbkhlhU+pd4WPQQjrYBh7kyh3X2bPV8RoQ
DCNKryLM2P+p2oswbIVnTB3zf29lyLFAUXPuKRvBqlFqTCTpjo4lEn9SCuwYSfo0
UiyFWnlVjgBh5r9pFu/5iYSnbrBCcbpt0BJfuZMXiJt4HhiX8iNyrbvdGexQr2g3
2hwD59R3ImK8ARl7EMH+nxDiDShAINrEkDSRG5a8nvHVJ56u1X7m4YTOH9Bomc45
hD1shf+0M5W29FCZkaw1FF3KkiuTIKEFTJIf1kvIf4XLKYgvkkDAIj1BlGRd07PR
EtKKR0W+FJWUUkEMA9eJJ/DoVxq+m6QWaGtvPb0/XQw/plITy5+HcjSmzUcP/4AM
MPIQXHO7dhhA9nJ3z6lrnqfhUegdetfpif5xm6TAh8mYGM6dYGFjpMcjrLYO6Nbg
eGCcqTfvocLg5Rt9fdgWYDtmIGUbmQqYUna6lHo86rQF4BaWz8DFCIRmCefQPirs
CBCA+n/k9M9U5jTE+k8HxYTvpIgtIeHc1HWygF3+UxMGVn0vFLynbzKz6jGnWl85
GwnZIh8prUSK
=MWTQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Eliminate an obsolete thermal zone registration function"
* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Drop thermal_zone_device_register()
thermal: Use thermal_tripless_zone_device_register()
thermal: core: Add function for registering tripless thermal zones
thermal: core: Clean up headers of thermal zone registration functions
Commit a1d7671910 ("md: use mddev->external to select holder in
export_rdev()") fix the problem that 'claim_rdev' is used for
blkdev_get_by_dev() while 'rdev' is used for blkdev_put().
However, if mddev->external is changed from 0 to 1, then 'rdev' is used
for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And
this problem can be reporduced reliably by following:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330
Modules linked in: multipath md_mod loop
CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50
RIP: 0010:blkdev_put+0x27c/0x330
Call Trace:
<TASK>
export_rdev.isra.23+0x50/0xa0 [md_mod]
mddev_unlock+0x19d/0x300 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix the problem by recording if 'rdev' is used as holder.
Fixes: a1d7671910 ("md: use mddev->external to select holder in export_rdev()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230825025532.1523008-3-yukuai1@huaweicloud.com
Except for initial reference, mddev->kobject is referenced by
rdev->kobject, and if the last rdev is freed, there is no guarantee that
mddev is still valid. Hence mddev should not be used anymore after
export_rdev().
This problem can be triggered by following test for mdadm at very
low rate:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#4] PREEMPT SMP
CPU: 0 PID: 1292 Comm: test Tainted: G D W 6.5.0-rc2-00121-g01e55c376936 #562
RIP: 0010:md_wakeup_thread+0x9e/0x320 [md_mod]
Call Trace:
<TASK>
mddev_unlock+0x1b6/0x310 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by don't dereference mddev after export_rdev().
Fixes: 3ce94ce5d0 ("md: fix duplicate filename for rdev")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230825025532.1523008-2-yukuai1@huaweicloud.com
Fix an Intel RAPL power capping driver regression introduced
during the 6.5 development cycle (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=XadJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an Intel RAPL power capping driver regression introduced during
the 6.5 development cycle (Srinivas Pandruvada)"
* tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix invalid setting of Power Limit 4
This reverts commit d5af729dc2.
d5af729dc2 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.
But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.
Revert d5af729dc2 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.
Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround
-----BEGIN PGP SIGNATURE-----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=txoJ
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
- Fix an incorrect mask in the CXL PMU driver
- Fix a regression in early parsing of the kernel command line
- Fix an IP checksum OoB access reported by syzbot
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmT6/MgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNABnB/0XsQEfl+cjE1BJnYuwiZyMbraSAL2i5oy9
3LUKHOQblZpSnf+OCxr2otBoRVpM2hmXcGQymUzcI8SmLtgNt8RFmwVtyuj3X6ZX
JTrdxLIMK2TQi/dqQ9ssJCejW4Y2fXDfJ2hZSpTG40TVyU8mL9BzI61HGQYcMA4T
0HFzvfDFoDDwslJgeKyVnaEU03o81HaRTOgL4OHAT9AhWlIzaWmVtJf+y/metd7U
ccE1yA0LG9teAgN3wC2yWWR4iBG0/Fe1UHV8ouvtXXAuLLySIObYKSa3hhOWz5N0
QDNQH12El+I7pKoA6N/D8orgXVk9xt3Q+9DSI0wcyGn+HsbLNprC
=9Une
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is a fix for a broken strscpy() conversion that landed in
the merge window and broke early parsing of the kernel command line.
- Fix an incorrect mask in the CXL PMU driver
- Fix a regression in early parsing of the kernel command line
- Fix an IP checksum OoB access reported by syzbot"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
perf: CXL: fix mismatched number of counters mask
1, Allow usage of LSX/LASX in the kernel;
2, Add SIMD-optimized RAID5/RAID6 routines;
3, Add Loongson Binary Translation (LBT) extension support;
4, Add basic KGDB & KDB support;
5, Add building with kcov coverage;
6, Add KFENCE (Kernel Electric-Fence) support;
7, Add KASAN (Kernel Address Sanitizer) support;
8, Some bug fixes and other small changes;
9, Update the default config file.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmT5TfMWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqd3EACjqCaHNlp33kwufSPpGuQw9a8I
F7JW1KzBOoWELch5nFRjfQClROBWRmM4jN5YnxENBQ5K2F1K6gfxdkfjew+KV2mn
ki9ByamCfFVJDZXo9wavUD2LBrVakEFmLT+SyXBxdWwJ3fDivHjF6A0qs9ltp7dq
Bttq4bkw1mZsU6MnViRwPKVROtNUVrd9mwYSTq0iXviVEbWhPHQQTxRizNra9Z6X
7XWxO0ODHl0WVvdOJU+F16mBRS3Bs1g/HHAIDc41yrYEHFFOeFCEUAQSF/4Nj5wj
BAfAB8WOa9+vPH8fTnrpCt2RtGJmkz71TM49DdXB7jpGaWIyc4WDi9MXeeBiJ0wE
vQg8IECc9POC1sH4/6BMwq2qkrWRj2PYFYof0fP66iWNjmodtNUf7GOVHy8MTQan
xHWizJFAdY/u/bwbF9tRQ+EVeot/844CkjtZxkgTfV8shN6kCMEVAamwBItZ7TXN
g/oc1ORM6nsKHBDQF3r2LSY0Gbf3OSfMJVL8SLEQ9hAhgGhotmJ36B4bdvyO7T0Q
gNn//U+p4IIMFRKRxreEz9P0KjTOJrHAAxNzu1oZebhGZd5WI+i0PHYkkBDKZTXc
7qaEdM2cX8Wd0ePIXOHQnSItwYO7ilrviHyeCM8wd/g2/W/00jvnpF3J+2rk7eJO
rcfAr8+V5ylYBQzp6Q==
=NXy2
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
-----BEGIN PGP SIGNATURE-----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=bhor
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Revert exporting symbols needed for dumping the raw printk buffer in
panic().
I pushed the export prematurely before the user was ready for merging
into the mainline.
* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: export symbols for debug modules"
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZPi3lxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSW+4A/3VcBRAB8/1HTTUulwUMYhF2msyAN6p5TtKl
WGVASdC1AP9NbR2Dh9HwHZmVrlwRbVlqSh9Avi+d0VNQjJKPwvtHBw==
=nU3g
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.
This avoids users to explicitly select MMU.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Puranjay Mohan <puranjay12@gmail.com> says:
Here is some data to prove the V2 fixes the problem:
Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m47.562s
user 0m24.145s
sys 6m37.064s
With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m29.472s
user 0m25.865s
sys 6m18.401s
BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================
Test setup:
===========
Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1
To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.
The script was run with following perf command:
./run.sh "perf stat -a \
-e iTLB-load-misses \
-e dTLB-load-misses \
-e dTLB-store-misses \
-e instructions \
--timeout 60000"
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.
Results
=======
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
4939048 iTLB-load-misses
5468689 dTLB-load-misses
465234 dTLB-store-misses
1441082097998 instructions
60.045791200 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
3430035 iTLB-load-misses
5008745 dTLB-load-misses
409944 dTLB-store-misses
1441535637988 instructions
60.046296600 seconds time elapsed
Improvements in metrics
=======================
It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.
--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------
I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.
This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs
[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards
* b4-shazam-merge:
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
The following KASLR implementation allows to randomize the kernel mapping:
- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
hence the patch 3 factorizes KASLR related functions for riscv to take
advantage.
The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.
* b4-shazam-merge:
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.
* b4-shazam-merge:
RISC-V: Add ptrace support for vectors
Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
This patch series is a subset from Arnd's original series [0]. Ive just
picked up the bits required for RISC-V unification of cache flushing.
Remaining patches from the series [0] will be taken care by Arnd soon.
* b4-shazam-merge:
riscv: dma-mapping: switch over to generic implementation
riscv: dma-mapping: skip invalidation before bidirectional DMA
riscv: dma-mapping: only invalidate after DMA, not flush
Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Evan Green <evan@rivosinc.com> says:
The current setting for the hwprobe bit indicating misaligned access
speed is controlled by a vendor-specific feature probe function. This is
essentially a per-SoC table we have to maintain on behalf of each vendor
going forward. Let's convert that instead to something we detect at
runtime.
We have two assembly routines at the heart of our probe: one that
does a bunch of word-sized accesses (without aligning its input buffer),
and the other that does byte accesses. If we can move a larger number of
bytes using misaligned word accesses than we can with the same amount of
time doing byte accesses, then we can declare misaligned accesses as
"fast".
The tradeoff of reducing this maintenance burden is boot time. We spend
4-6 jiffies per core doing this measurement (0-2 on jiffie edge
alignment, and 4 on measurement). The timing loop was based on
raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number
of algorithms). By taking only the fastest iteration out of all
attempts for use in the comparison, variance between runs is very low.
On my THead C906, it looks like this:
[ 0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast
Several others have chimed in with results on slow machines with the
older algorithm, which took all runs into account, including noise like
interrupts. Even with this variation, results indicate that in all cases
(fast, slow, and emulated) the measured numbers are nowhere near each
other (always multiple factors away).
* b4-shazam-merge:
RISC-V: alternative: Remove feature_probe_func
RISC-V: Probe for unaligned access speed
Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When kselftest is built/installed with the 'gen_tar' target, rsync is
used for the installation step to copy files. Extra care is needed for
tests that have symlinks. Commit ae108c48b5 ("selftests: net: Fix
cross-tree inclusion of scripts") added '-L' (transform symlink into
referent file/dir) to rsync, to fix dangling links. However, that
broke some tests where the symlink (being a symlink) is part of the
test (e.g. exec:execveat).
Use rsync's '--copy-unsafe-links' that does right thing.
Fixes: ae108c48b5 ("selftests: net: Fix cross-tree inclusion of scripts")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.
Some users have noted these hangs [1].
Fix this by nesting the timeout with an additional timeout without the
foreground option.
Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ # [1]
Fixes: 651e0d8814 ("kselftest/runner: allow to properly deliver signals to tests")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Hou Tao says:
====================
bpf: Enable IRQ after irq_work_raise() completes
From: Hou Tao <houtao1@huawei.com>
Hi,
The patchset aims to fix the problem that bpf_mem_alloc() may return
NULL unexpectedly when multiple bpf_mem_alloc() are invoked concurrently
under process context and there is still free memory available. The
problem was found when doing stress test for qp-trie but the same
problem also exists for bpf_obj_new() as demonstrated in patch #3.
As pointed out by Alexei, the patchset can only fix ENOMEM problem for
normal process context and can not fix the problem for irq-disabled
context or RT-enabled kernel.
Patch #1 fixes the race between unit_alloc() and unit_alloc(). Patch #2
fixes the race between unit_alloc() and unit_free(). And patch #3 adds
a selftest for the problem. The major change compared with v1 is using
local_irq_{save,restore)() pair to disable and enable preemption
instead of preempt_{disable,enable}_notrace pair. The main reason is to
prevent potential overhead from __preempt_schedule_notrace(). I also
run htab_mem benchmark and hash_map_perf on a 8-CPUs KVM VM to compare
the performance between local_irq_{save,restore} and
preempt_{disable,enable}_notrace(), but the results are similar as shown
below:
(1) use preempt_{disable,enable}_notrace()
[root@hello bpf]# ./map_perf_test 4 8
0:hash_map_perf kmalloc 652179 events per sec
1:hash_map_perf kmalloc 651880 events per sec
2:hash_map_perf kmalloc 651382 events per sec
3:hash_map_perf kmalloc 650791 events per sec
5:hash_map_perf kmalloc 650140 events per sec
6:hash_map_perf kmalloc 652773 events per sec
7:hash_map_perf kmalloc 652751 events per sec
4:hash_map_perf kmalloc 648199 events per sec
[root@hello bpf]# ./benchs/run_bench_htab_mem.sh
normal bpf ma
=============
overwrite per-prod-op: 110.82 ± 0.02k/s, avg mem: 2.00 ± 0.00MiB, peak mem: 2.73MiB
batch_add_batch_del per-prod-op: 89.79 ± 0.75k/s, avg mem: 1.68 ± 0.38MiB, peak mem: 2.73MiB
add_del_on_diff_cpu per-prod-op: 17.83 ± 0.07k/s, avg mem: 25.68 ± 2.92MiB, peak mem: 35.10MiB
(2) use local_irq_{save,restore}
[root@hello bpf]# ./map_perf_test 4 8
0:hash_map_perf kmalloc 656299 events per sec
1:hash_map_perf kmalloc 656397 events per sec
2:hash_map_perf kmalloc 656046 events per sec
3:hash_map_perf kmalloc 655723 events per sec
5:hash_map_perf kmalloc 655221 events per sec
4:hash_map_perf kmalloc 654617 events per sec
6:hash_map_perf kmalloc 650269 events per sec
7:hash_map_perf kmalloc 653665 events per sec
[root@hello bpf]# ./benchs/run_bench_htab_mem.sh
normal bpf ma
=============
overwrite per-prod-op: 116.10 ± 0.02k/s, avg mem: 2.00 ± 0.00MiB, peak mem: 2.74MiB
batch_add_batch_del per-prod-op: 88.76 ± 0.61k/s, avg mem: 1.94 ± 0.33MiB, peak mem: 2.74MiB
add_del_on_diff_cpu per-prod-op: 18.12 ± 0.08k/s, avg mem: 25.10 ± 2.70MiB, peak mem: 34.78MiB
As ususal comments are always welcome.
Change Log:
v2:
* Use local_irq_save to disable preemption instead of using
preempt_{disable,enable}_notrace pair to prevent potential overhead
v1: https://lore.kernel.org/bpf/20230822133807.3198625-1-houtao@huaweicloud.com/
====================
Link: https://lore.kernel.org/r/20230901111954.1804721-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kill saved_tid. It looks ugly to update *tid and then restore the
previous value if __task_pid_nr_ns() returns 0. Change this code
to update *tid and common->pid_visiting once before return.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230905154656.GA24950@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test case creates 4 threads and then pins these 4 threads in CPU 0.
These 4 threads will run different bpf program through
bpf_prog_test_run_opts() and these bpf program will use bpf_obj_new()
and bpf_obj_drop() to allocate and free local kptrs concurrently.
Under preemptible kernel, bpf_obj_new() and bpf_obj_drop() may preempt
each other, bpf_obj_new() may return NULL and the test will fail before
applying these fixes as shown below:
test_preempted_bpf_ma_op:PASS:open_and_load 0 nsec
test_preempted_bpf_ma_op:PASS:attach 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:FAIL:ENOMEM unexpected ENOMEM: got TRUE
#168 preempted_bpf_ma_op:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230901111954.1804721-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It only adds the unnecessary confusion and compicates the "retry" code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230905154654.GA24945@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
