Change HUGEPAGE_SIZE to become 4 MB on 32-bit kernels, which leads
that kernel code and kernel data will start on 4 MB boundaries.
Although a 32-bit kernel does not support huge pages, most
machines have support for Block-TLBs (BTLB) which allow to
configure the system to use large pages (block TLBs) to minimize
the TLB contention. This is done through calls to PDC and the
32-bit kernel can then call BTLB PDC functions to tell
the machine to optimize the TLBs.
Signed-off-by: Helge Deller <deller@gmx.de>
In ssb_calc_clock_rate(), there is a potential issue where the value of
m1 could be zero due to initialization using clkfactor_f6_resolv(). This
situation raised concerns about the possibility of a division by zero
error.
We fixed it by following the suggestions provided by Larry Finger
<Larry.Finger@lwfinger.net> and Michael Büsch <m@bues.ch>. The fix
involves returning a value of 1 instead of 0 in clkfactor_f6_resolv().
This modification ensures the proper functioning of the code and
eliminates the risk of division by zero errors.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230904232346.34991-1-rand.sec96@gmail.com
Secure firmware is protected by public/private key cryptography. To help
firmware self verify integrity, configure a heap address for these
data before downloading firmware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-9-pkshih@realtek.com
To support download more than one firmware, adjust flow to download
firmware by unit of firmware suit. Then, flow becomes
1. initial setup - disable/enable_wcpu
2. for all firmware suits
2.1. download WiFi CPU, and check ready
2.2. download BB MCU, and check ready
3. check status code to make sure all ready
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-8-pkshih@realtek.com
Though WiFi 7 chips need BB MCU firmware, we don't download it in probe
stage. Instead, only bring interface up under normal operation or WoWLAN
mode. So, add an argument to assist download flow to setup download
settings properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-6-pkshih@realtek.com
For WiFi 6 chips, there is only single one firmware i.e. WiFi CPU firmware,
so no need an argument to discriminate them. For WiFi 7 chips, BB MCU
firmware is introduced, and we need to check it ready after downloading.
For each type of firmware, we need to check corresponding hardware ready
bit. After downloading all firmware, check status code to determine if
all things are ready.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-5-pkshih@realtek.com
To work with generalized flow of download firmware, implement WiFi 7
specific functions to support it. These functions include disable/enable
WiFi CPU, status of path ready, and status of firmware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-4-pkshih@realtek.com
In order to reuse the flow to download firmware, define some mac_gen::ops
to implement them for WiFi 6 and 7 chips individually. This doesn't change
logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-3-pkshih@realtek.com
To download firmware, we need to check path is ready. There are two kinds
of path -- one is to download firmware header, and the other is to download
firmware body.
Since the polling method is different from WiFi 7 chips, make it to be
an individual function, and then we can reuse the download flow.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-2-pkshih@realtek.com
According to Wi-Fi/BT roles' settings, we fill corresponding H2Cs (host
to chip packets). Then, following MCC (multi-channel concurrency) pattern,
we send these H2Cs as planned. Eventually, the trigger H2Cs will be sent
to tell FW to really start/stop MCC.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-7-pkshih@realtek.com
Fix a typo where `bitamp` should be `bitmap`. Don't change functionality
at all.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-6-pkshih@realtek.com
After the previous works, we can now expand and display the MCC pattern
in more detail, as shown below.
|< MCC interval >|
|< duration ref >| (if mid bt) |< duration aux >| (if tail bt) |
|<tob ref >|< toa ref>| ... |<tob aux >|< toa aux>| ... |
V V
tbtt ref tbtt aux
|< beacon offset >|
(where tob means `time offset behind` and toa means `time offset ahead`)
There are two key points.
1. decide position of BT slot if MCC pattern needs to handle BT duration.
2. calculate all parameters related to tob and toa in MCC pattern.
For point (1), when BT duration needs to be handled, BT position will
rely on beacon offset, either middle or tail. For point (2), to ensure
durations of the Wi-Fi roles cover their beacons, we have to calculate
tob and toa for them according to their TBTT.
And, there are two strategies to calculate parameters, strict and loose.
In strict pattern, all parameters take HW time into account as limitation.
But, the strict calculation are not always successful. In loose pattern,
it only tries to give positive parameters to reference role and doesn't
care much about auxiliary role. If unfortunately auxiliary role gets
negative parameters in loose pattern, FW will be notified and then deal
with it. So, the loose calculation won't fail. In general, we always try
strict pattern cases before using a loose pattern.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-5-pkshih@realtek.com
Before calculating MCC pattern, we have to determine whether to handle BT
duration in it or not. The decision will depend on the channels that Wi-Fi
roles use. And, we have three cases shown below.
1. non-2GHz + non-2GHz
2. non-2GHz + 2GHz (different band)
3. 2GHz + 2GHz (dual 2GHz)
For case (1), we don't care BT duration in MCC pattern. For case (2), we
still don't care BT duration in MCC pattern. Instead, we try to satisfy it
by modifying duration of Wi-Fi role on non-2GHz channel. For case (3), we
need to modify Wi-Fi durations and also need to handle BT duration in MCC
pattern.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-4-pkshih@realtek.com
We determine the fundamental settings shown below.
|< MCC interval >|
|< duration ref >|< duration aux >|
| | | |
|< beacon offset >|
| |
V V
(tbtt ref) (tbtt aux)
(where `ref` (reference) and `aux` (auxiliary) mean the two MCC roles)
Based on MCC mode (GO+STA or GC+STA), we fill configurations of
MCC interval and beacon offset. And, we make sure each MCC role
have a basically required duration in the MCC interval.
The beacon offset mentioned above is a parameter for further MCC
pattern calculation. If MCC is in GC+STA mode, we will calculate
the real beacon offset through TSFs shown in beacons of both MCC
roles. Otherwise, we will use a default beacon offset, and make
GO sync STA's TSF timer with this offset.
MCC pattern calculation will break down each MCC role's duration
in more detail. We will implement it in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-3-pkshih@realtek.com
We prepare to support TDMA-based MCC (multi-channel concurrency)
which allows two kinds of modes below.
* P2P GO + normal STA
* P2P GC + normal STA
Each mode has two vif and two chanctx. Then, each vif binds one
separate chanctx and becomes one MCC role. We name the two MCC
roles as follows.
* MCC role - reference (ref)
We calculate the baseline of our TDMA things accodring
to its info, e.g. TBTT. In normal case, it will be put
at the first slot of TDMA.
* MCC role - auxiliary (aux)
MCC state machine will be running in FW eventually, but before that,
we have to fill and calculate things that are needed by FW. We fill
the information of MCC role according to its vif and its chanctx.
Then, we calculate the start time for MCC.
Note that the parameters used in the calculation now is assigned by
default rules. The precise parameters for better MCC behavior will be
derived in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-2-pkshih@realtek.com
Allow adjusting the maximum number of cached directories per share
(defaults to 16) via mount parm "max_cached_dirs"
Signed-off-by: Steve French <stfrench@microsoft.com>
In debugging a recent performance problem with statfs, it would have
been helpful to be able to trace the smb3 query fs info request
more narrowly. Add a trace point "smb3_qfs_done"
Which displays:
stat-68950 [008] ..... 1472.360598: smb3_qfs_done: xid=14 sid=0xaa9765e4 tid=0x95a76f54 unc_name=\\localhost\test rc=0
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
1, Enable LSX and LASX.
2, Enable KASLR (CONFIG_RANDOMIZE_BASE).
3, Enable jump label (patching mechanism for static key).
4, Enable LoongArch CRC32(c) Acceleration.
5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI.
6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems.
7, Enable WangXun NGBE/TXGBE NIC drivers.
8, Enable some IPVS options.
9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig.
10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig.
11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig.
12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca0 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b26303 ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e82 ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e216 ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().
Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a31e8b89b.
We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZPhEYwAKCRDbK58LschI
g6puAQCGLE9S2d5xw68Fq2KLrTjTXC5trB9N25NWvZWqgXHAeQEA3wXxTC8eF0dG
J24RwZC2vOC4hF3aNGeI0fv/6j7SKA0=
=0IU4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-09-06
We've added 9 non-merge commits during the last 6 day(s) which contain
a total of 12 files changed, 189 insertions(+), 44 deletions(-).
The main changes are:
1) Fix bpf_sk_storage to address an invalid wait context lockdep
report and another one to address missing omem uncharge,
from Martin KaFai Lau.
2) Two BPF recursion detection related fixes,
from Sebastian Andrzej Siewior.
3) Fix tailcall limit enforcement in trampolines for s390 JIT,
from Ilya Leoshkevich.
4) Fix a sockmap refcount race where skbs in sk_psock_backlog can
be referenced after user space side has already skb_consumed them,
from John Fastabend.
5) Fix BPF CI flake/race wrt sockmap vsock write test where
the transport endpoint is not connected, from Xu Kuohai.
6) Follow-up doc fix to address a cross-link warning,
from Eduard Zingerman.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
bpf, sockmap: Fix skb refcnt race after locking changes
docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst
selftests/bpf: Fix a CI failure caused by vsock write
====================
Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Micro-optimize the bitops code some more, similar to commits:
fdb6649ab7 ("x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions")
2fcff790dc ("powerpc: Use builtin functions for fls()/__fls()/fls64()")
From a recent discussion, I noticed that x86 is lacking an optimization
that appears in arch/powerpc/include/asm/bitops.h related to constant
folding. If you add a BUILD_BUG_ON(__builtin_constant_p(param)) to
these functions, you'll find that there were cases where the use of
inline asm pessimized the compiler's ability to perform constant folding
resulting in runtime calculation of a value that could have been
computed at compile time.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230828-x86_fls-v1-1-e6a31b9f79c3@google.com
On large enclaves we hit the softlockup warning with following call trace:
xa_erase()
sgx_vepc_release()
__fput()
task_work_run()
do_exit()
The latency issue is similar to the one fixed in:
8795359e35 ("x86/sgx: Silence softlockup detection when releasing large enclaves")
The test system has 64GB of enclave memory, and all is assigned to a single VM.
Release of 'vepc' takes a longer time and causes long latencies, which triggers
the softlockup warning.
Add cond_resched() to give other tasks a chance to run and reduce
latencies, which also avoids the softlockup detector.
[ mingo: Rewrote the changelog. ]
Fixes: 540745ddbc ("x86/sgx: Introduce virtual EPC for use by KVM guests")
Reported-by: Yu Zhang <yu.zhang@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yu Zhang <yu.zhang@ionos.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Haitao Huang <haitao.huang@linux.intel.com>
Cc: stable@vger.kernel.org
The arch_calc_vm_prot_bits() macro uses VM_PKEY_BIT0 etc. which are
not part of the UAPI, so the macro is completely useless for userspace.
It is also hidden behind the CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
config switch which we shouldn't expose to userspace. Thus let's move
this macro into a new internal header instead.
Fixes: 8f62c88322 ("x86/mm/pkeys: Add arch-specific VMA protection bits")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20230906162658.142511-1-thuth@redhat.com
With ":text =0xcccc", ld.lld fills unused text area with 0xcccc0000.
Example objdump -D output:
ffffffff82b04203: 00 00 add %al,(%rax)
ffffffff82b04205: cc int3
ffffffff82b04206: cc int3
ffffffff82b04207: 00 00 add %al,(%rax)
ffffffff82b04209: cc int3
ffffffff82b0420a: cc int3
Replace it with ":text =0xcccccccc", so we get the following instead:
ffffffff82b04203: cc int3
ffffffff82b04204: cc int3
ffffffff82b04205: cc int3
ffffffff82b04206: cc int3
ffffffff82b04207: cc int3
ffffffff82b04208: cc int3
gcc/ld doesn't seem to have the same issue. The generated code stays the
same for gcc/ld.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: 7705dc8557 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Link: https://lore.kernel.org/r/20230906175215.2236033-1-song@kernel.org
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-22-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
sysfs_create_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-20-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-14-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of creating driver-specific device attributes with
devm_device_add_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230729005133.1095051-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
