Introduce pedit add actions and use it to achieve decrement ttl offload.
Decrement ttl can be achieved by adding 0xff to the ttl field.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offload pedit set ipv6 hop limit, where the hop limit has already been
matched and the new value is one less, by translating it to a decrement.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offload pedit set ipv4 ttl field, where the ttl field has already been
matched and the new value is one less, by translating it to a decrement.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the first pedit set offload functionality for the sfc driver.
In addition to this, add offload functionality for both mac source and
destination pedit set actions.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the initial ethernet pedit set action infrastructure in
preparation for adding mac src and dst pedit action offloads.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix this warning which appears with W=1 and without CONFIG_OF:
warning: no previous declaration for 'pcibios_get_phb_of_node'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308230949.PphIIlhq-lkp@intel.com/
Fixes: 314a1408b7 ("um: virt-pci: implement pcibios_get_phb_of_node()")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fixes the following build errors observed from W=1 builds:
arch/um/drivers/xterm_kern.c:35:5: warning: no previous prototype for
function 'xterm_fd' [-Wmissing-prototypes]
35 | int xterm_fd(int socket, int *pid_out)
| ^
arch/um/drivers/xterm_kern.c:35:1: note: declare 'static' if the
function is not intended to be used outside of this translation unit
35 | int xterm_fd(int socket, int *pid_out)
| ^
| static
arch/um/drivers/chan_kern.c:183:6: warning: no previous prototype for
function 'free_irqs' [-Wmissing-prototypes]
183 | void free_irqs(void)
| ^
arch/um/drivers/chan_kern.c:183:1: note: declare 'static' if the
function is not intended to be used outside of this translation unit
183 | void free_irqs(void)
| ^
| static
arch/um/drivers/slirp_kern.c:18:6: warning: no previous prototype for
function 'slirp_init' [-Wmissing-prototypes]
18 | void slirp_init(struct net_device *dev, void *data)
| ^
arch/um/drivers/slirp_kern.c:18:1: note: declare 'static' if the
function is not intended to be used outside of this translation unit
18 | void slirp_init(struct net_device *dev, void *data)
| ^
| static
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308081050.sZEw4cQ5-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instance:
arch/um/drivers/port_kern.c:147:14: warning: no previous extern
declaration for non-static variable 'port_work'
[-Wmissing-variable-declarations]
DECLARE_WORK(port_work, port_work_proc);
^
arch/um/drivers/port_kern.c:147:1: note: declare 'static' if the
variable is not intended to be used outside of this translation unit
DECLARE_WORK(port_work, port_work_proc);
^
This symbol is not referenced by more than one translation unit, so give
it static storage.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081050.sZEw4cQ5-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instance:
arch/um/drivers/hostaudio_kern.c:316:3: warning: no previous extern
declaration for non-static variable 'module_data'
[-Wmissing-variable-declarations]
} module_data;
^
arch/um/drivers/hostaudio_kern.c:313:1: note: declare 'static' if the
variable is not intended to be used outside of this translation unit
struct {
^
This symbol is not referenced by more than one translation unit, so give
it static storage.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081050.sZEw4cQ5-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
In this case, we are able to drop the now superfluous `... - 1`
instances because `strscpy` will automatically truncate the last byte by
setting it to a NUL byte if the source size exceeds the destination size
or if the source string is not NUL-terminated.
I've also opted to remove the seemingly useless char* casts. I'm not
sure why they're present at all since (after expanding the `ifr_name`
macro) `ifr.ifr_ifrn.ifrn_name` is a char* already.
All in all, `strscpy` is a more robust and less ambiguous interface
while also letting us remove some `... -1`'s which cleans things up a
bit.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We rely on 'uname -s' returning 'Linux' because there are os-Linux/
directories, but no other os-*/.
Supporting a non-Linux host is unlikely to happen.
Let's hard-code 'Linux'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
When UML is compiled under 32-bit x86, it uses its own copy of
checksum_32.S, which is terribly out-of-date and doesn't support
checksumming unaligned data.
This causes the new "checksum" KUnit test to fail:
./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_64BIT=n --cross_compile i686-linux-gnu- checksum
KTAP version 1
# Subtest: checksum
1..3
# test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:243
Expected result == expec, but
result == 33316 (0x8224)
expec == 33488 (0x82d0)
not ok 1 test_csum_fixed_random_inputs
# test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:267
Expected result == expec, but
result == 65280 (0xff00)
expec == 0 (0x0)
not ok 2 test_csum_all_carry_inputs
# test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:306
Expected result == expec, but
result == 65531 (0xfffb)
expec == 0 (0x0)
not ok 3 test_csum_no_carry_inputs
Sharing the normal implementation in arch/x86/lib both fixes all of
these issues and means any further fixes only need to be done once.
x86_64 already seems to share the same implementation between UML and
"normal" x86.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
asm/current.h is included by some assembly files (either directly, or
indirectly). This works on some architectures (such as x86), as their
implementation of current.h is careful to not include any C, but the
asm-generic version includes linux/thread-info.h unconditionally, which
leads to errors when either C code or non-asm-compatible preprocessor
directives are included.
Just wrap the contents behind an #ifndef __ASSEMBLY__ to avoid any C
code making its way in.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
regression due to a missing setting of X86_FEATURE_OSXSAVE.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bPF+
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix an FPU invalidation bug on exec(), and fix a performance
regression due to a missing setting of X86_FEATURE_OSXSAVE"
* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
x86/fpu: Invalidate FPU state correctly on exec()
conversion of the software based interrupt resend mechanism to hlist missed
to add a check whether the descriptor is already enqueued and dropped the
interrupt descriptor lookup for nested interrupts.
The missing check whether the descriptor is already queued causes hlist
corruption and can be observed in the wild. The dropped parent descriptor
lookup has not yet caused problems, but it would result in stale interrupt
line in the worst case.
Add the missing enqueued check and bring the descriptor lookup back to cure
this.
-----BEGIN PGP SIGNATURE-----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=Snax
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A last minute fix for a regression introduced in the v6.5 merge
window.
The conversion of the software based interrupt resend mechanism to
hlist missed to add a check whether the descriptor is already enqueued
and dropped the interrupt descriptor lookup for nested interrupts.
The missing check whether the descriptor is already queued causes
hlist corruption and can be observed in the wild. The dropped parent
descriptor lookup has not yet caused problems, but it would result in
stale interrupt line in the worst case.
Add the missing enqueued check and bring the descriptor lookup back to
cure this"
* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix software resend lockup and nested resend
-----BEGIN PGP SIGNATURE-----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=lord
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
some trivial cleanups"
* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix hw_breakpoint_control() for watchpoints
LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
LoongArch: Add identifier names to arguments of die() declaration
LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
LoongArch: Remove <asm/export.h>
LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
LoongArch: Remove unneeded #include <asm/export.h>
LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
LoongArch: Remove redundant "source drivers/firmware/Kconfig"
The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:
First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.
This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.
Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.
Add back the corresponding code that adds the parent descriptor to the
resend list.
Fixes: bc06a9e087 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org
For transfers below 4K, let's use iATU since using eDMA for such small
transfers is inefficient.
This is mainly because setting up an eDMA transfer and waiting for
completion adds some latency. This latency is negligible for large
transfers but not for the smaller ones.
With using iATU, there is an increase in ~50Mbps throughput on both MHI
UL (Uplink) and DL (Downlink) channels.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support for Qualcomm Snapdragon SM8450 SoC to the EPF driver. SM8450
has the dedicated PID (0x0306) and supports eDMA. Currently, it has no
fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS".
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support for Embedded DMA (eDMA) available in the DesignWare PCIe IP
to transfer the MHI buffers between the host and the endpoint. The eDMA
use helps achieve greater throughput as the transfers are offloaded from
CPUs.
For differentiating the iATU and eDMA APIs, the pci_epf_mhi_{read/write}
APIs are renamed to pci_epf_mhi_iatu_{read/write} and separate eDMA
specific APIs pci_epf_mhi_edma_{read/write} are introduced.
Platforms that require eDMA support can pass the MHI_EPF_USE_DMA flag
through pci_epf_mhi_ep_info.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Qualcomm PCIe Endpoint controllers have the in-built Embedded DMA (eDMA)
peripheral for offloading the data transfer between the PCIe bus and
memory.
Let's add support for it by enabling the eDMA IRQ in the driver. The
eDMA DMA Engine driver will handle the rest of the functionality.
Since the eDMA on Qualcomm platforms only uses a single IRQ for all
channels, use 1 for edma.nr_irqs.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Insert parameterized test for the drm_fb_swab() to ensure correctness
and prevent future regressions.
Each expected color has it bytes reversed in order, so xrgb would be
bgrx.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-2-bd3e9f9bc2fb@riseup.net
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.
Otherwise we can't set read watchpoint and write watchpoint separately.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is a port of commit 379eb01c21 ("riscv: Ensure the value
of FP registers in the core dump file is up to date").
The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit e6bcfdd75d ("x86/microcode: Hide the config knob") removed the
MICROCODE_AMD config, but left some references in defconfigs and comments,
that have no effect on any kernel build around.
Clean up those remaining config references. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230825141226.13566-1-lukas.bulwahn@gmail.com
commit f922c13e77 ("KVM: arm64: Introduce
pkvm_alloc_private_va_range()") and commit 92abe0f81e ("KVM: arm64:
Introduce hyp_alloc_private_va_range()") added an alignment for the
start address of any allocation into the nVHE hypervisor private VA
range.
This alignment (order of the size of the allocation) intends to enable
efficient stack verification (if the PAGE_SHIFT bit is zero, the stack
pointer is on the guard page and a stack overflow occurred).
But this is only necessary for stack allocation and can waste a lot of
VA space. So instead make stack-specific functions, handling the guard
page requirements, while other users (e.g. fixmap) will only get page
alignment.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811112037.1147863-1-vdonnefort@google.com
On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.
This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.
Add the missing cleanup path.
Fixes: 33c9ab5b49 ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Connector class driver only configure cable type active or passive.
Configure if the cable type is retimer or redriver with this change.
This detail will be provided as a part of cable discover mode VDO.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Acked-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230718024703.1013367-2-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.
Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
- Clarify the data flows. For SB Live! I fixed only the most obvious
point ("from" vs. "for").
- Mention 7.1 side channels on Audigy.
- Be unspecific about the output DACs on Audigy, as lots of variants
actually exist (see emu_chip_details table).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230825222157.170978-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the MANUALS/PATENTS section of the former simply refer to the latter
- there is no point in duplicating this information with little value to
end users.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230825222157.170978-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Filling the rawmidi name and substream name can be truncated, and this
leads to spurious compiler warnings due to -Wformat-truncation.
Although the truncation is the expected behavior, it'd be better to
truncate the string within "(...)"
This patch puts the precision specifies to each %s for fitting the
words within the size-limited strings.
Fixes: 5f11dd938f ("ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251844.1FuQYsql-lkp@intel.com/
Link: https://lore.kernel.org/r/20230826072151.23408-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-24 (igc, e1000e)
This series contains updates to igc and e1000e drivers.
Vinicius adds support for utilizing multiple PTP registers on igc.
Sasha reduces interval time for PTM on igc and adds new device support
on e1000e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Add support for the next LOM generation
igc: Decrease PTM short interval from 10 us to 1 us
igc: Add support for multiple in-flight TX timestamps
====================
Link: https://lore.kernel.org/r/20230824204418.1551093-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Fixes: 523847df1b ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check that the wq exists before queuing up work for a
failed devcmd, as the PF is responsible for health and the VF
doesn't have a wq.
Fixes: c2dbb09043 ("pds_core: health timer and workqueue")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VF doesn't need to send a reset command, and in a PCI reset
scenario it might not have a valid IO space to write to anyway.
Fixes: 523847df1b ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure the health reporter is set up before we use it in
our devlink health updates, especially since the VF doesn't
set up the health reporter.
Fixes: 25b450c05a ("pds_core: add devlink health facilities")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't access structs that have been cleared when in the fw_down
state and the various structs have been cleaned and are waiting
to recover. This caused a panic on rmmod when already in fw_down
and devlink_param_unregister() tried to check the parameters.
Fixes: 40ced89445 ("pds_core: devlink params for enabling VIF support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
