During devlink port init/cleanup and register/unregister calls, there
are many lookups of vport. Instead of passing vport_num as argument to
functions, pass the vport struct pointer directly and avoid repeated
lookups.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Struct devlink_port is usually embedded in a driver-specific struct
which allows to carry driver context to devlink port ops.
Introduce a container struct to include devlink_port struct
in preparation to also include driver context for devlink port ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently each PF/VF/SF devlink port op called into mlx5 code calls
is_port_function_supported() to check if the port is either
PF, VF or SF. So make sure that the ops are registered with devlink
port only for those and avoid the is_port_function_supported() checks
in ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Since the previous patch removed the only users of these functions,
remove them.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Similar to the PF/VF helpers, introduce a set of load/unload helpers
for SF vports. From there, call mlx5_eswitch_load/unload_vport() which
are common for PFs/VFs and newly introduced SF helpers.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently there is a separate set of functions used to
register/unregister the SF. The only difference is currently the ops
struct. Move the struct up and use it for SFs in
mlx5_esw_offloads_devlink_port_register().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to prepare for
mlx5_esw_offloads_devlink_port_register/unregister() to be used
for SFs as well, push out the PF/VF specific init/cleanup calls outside.
Introduce mlx5_eswitch_load/unload_pf_vf_vport() and call them from
there. Use these new helpers of PF/VF loading and make
mlx5_eswitch_local/unload_vport() reusable for SFs.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Similar to what was done for PFs/VFs, introduce devlink port init and
cleanup helpers for SFs and manage the vport->dl_port pointer there.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to prepare the devlink port registration function to be common
for PFs/VFs and SFs, change the existing devlink port allocation and
free functions into PF/VF init and cleanup, so similar helpers could be
later on introduced for SFs. Make the init/cleanup helpers responsible
for setting/clearing the vport->dl_port pointer.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Factor out a new helper form ext4_get_dev_journal() to get external
journal bdev and check validation of this device, drop ext4_blkdev_get()
helper, and also remove duplicate check of journal feature. It makes
ext4_get_dev_journal() more clear than before.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-12-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Having __sysret() as an inline function has the unfortunate effect of
adding casts and large constants comparisons after the syscall returns
that significantly inflate some light code that's otherwise syscall-
heavy. Even nolibc-test grew by ~1%.
Let's switch back to a macro for this, and use it only with signed
arguments. Note that it is also possible to design a slightly more
complex macro covering unsigned and pointers but we only have 3 such
syscalls so it is pointless, and these were just addressed not to use
this macro anymore. Now for the argument (the local variable containing
the syscall return value), any negative value is an error, that results
in -1 being returned and errno to be assigned the opposite value.
This may be revisited again in the future if really needed but for now
let's get back to something sane.
Fixes: 428905da6e ("tools/nolibc: sys.h: add a syscall return helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The __sysret() function causes some undesirable casts so we'll revert
it. In order to keep it simple it will now only support integer return
values like in the past, so we must basically revert the changes that
were made to these 3 syscalls which return a pointer so that they
simply rely on their own test and the SET_ERRNO() macro.
Fixes: 4201cfce15 ("tools/nolibc: clean up sbrk() routine")
Fixes: 924e9539ae ("tools/nolibc: clean up mmap() routine")
Fixes: d27447bc2e ("tools/nolibc: sys.h: apply __sysret() helper")
Link: https://lore.kernel.org/lkml/20230806095846.GB10627@1wt.eu/
Link: https://lore.kernel.org/lkml/ZNKOJY+g66nkIyvv@1wt.eu/
Cc: Zhangjin Wu <falcon@tinylab.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Silence the following warnings reported by the new -Wall -Wextra options
with pure assembly code.
In file included from sysroot/powerpc/include/stdio.h:13,
from nolibc-test.c:13:
sysroot/powerpc/include/arch.h: In function '_start':
sysroot/powerpc/include/arch.h:192:32: warning: unused variable 'r2' [-Wunused-variable]
192 | register volatile long r2 __asm__ ("r2") = (void *)&TOC - (void *)_start;
| ^~
sysroot/powerpc/include/arch.h:187:97: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
187 | void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void)
| ^~~~~~
Since only elfv2 ABI requires to save the TOC/GOT pointer to r2
register, when using elfv1 ABI, the old C code is simply ignored by the
compiler, but the compiler can not ignore the inline assembly code and
will introduce build failure or running segfaults. So, let's further
only add the new assembly code for elfv2 ABI with the checking of
_CALL_ELF == 2.
Link: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
Link: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
libc-test is mainly added to compare the behavior of nolibc to the
system libc, it is meaningless and error-prone with cross compiling.
Let's use HOSTCC instead of CC to avoid wrongly use cross compiler when
CROSS_COMPILE is passed or customized.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Fixes: cfb672f94f ("selftests/nolibc: add run-libc-test target")
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows to generate smaller text/data/dec size.
As the _start_c() function added by crt.h, __stack_chk_init() is called
from _start_c() instead of the assembly _start. So, it is able to mark
it with static now.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
After the tests finish, it is valuable to report and summarize with
existing test log.
This avoid rerun or run the tests again when not necessary.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64 variant for big endian 64-bit PowerPC, users can pass XARCH=ppc64
to test it.
The powernv machine of qemu-system-ppc64 is used with
powernv_be_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- differs from little endian 64-bit PowerPC, vmlinux is used instead of
zImage, because big endian zImage [2] only boot on qemu with x-vof=on
(added from qemu v7.0) and a fixup patch [3] for qemu v7.0.51:
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
- for big endian ppc64, as the help message from arch/powerpc/Kconfig
shows, the V2 ABI is standard for 64-bit little-endian, but for
big-endian it is less well tested by kernel and toolchain, so, use
elfv1 as-is, no need to explicitly ask toolchain to use elfv2 here.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
[2]: https://github.com/linuxppc/issues/issues/402
[3]: https://lore.kernel.org/qemu-devel/20220504065536.3534488-1-aik@ozlabs.ru/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722121019.GD17311@1wt.eu/
Link: https://lore.kernel.org/lkml/20230719043353.GC5331@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64le variant for little endian 64-bit PowerPC, users can pass
XARCH=ppc64le to test it.
The powernv machine of qemu-system-ppc64le is used for there is just a
working powernv_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- little endian ppc64 prefers elfv2 to elfv1 if the toolchain (e.g. gcc
13.1.0) supports it, let's align with kernel, otherwise, our elfv1
binary will not run on kernel with elfv2 ABI.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722120747.GC17311@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc variant for 32-bit PowerPC and uses it as the default variant of
powerpc architecture.
Users can pass XARCH=ppc (or ARCH=powerpc) to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit
powerpc kernel with pmac32_defconfig. The missing PMACZILOG serial tty
and console are enabled in another patch [2].
Note,
- zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are
overlapping" error, so, vmlinux is used instead.
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powermac.html
[2]: https://lore.kernel.org/lkml/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.1690982937.git.tanyuan@tinylab.org/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZL9leVOI25S2+0+g@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Most of the CPU architectures have different variants, but kernel
usually only accepts parts of them via the ARCH variable, the others
should be customized via kernel config files.
To simplify testing, a new XARCH variable is added to extend the
kernel's ARCH with a few variants of the same architecture, and it is
used to customize variant specific variables, at last XARCH is converted
to the kernel's ARCH:
e.g. make run XARCH=<one of the supported variants>
| \
| `-> variant specific variables:
| IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ...
\
`---> kernel's ARCH
XARCH and ARCH are carefully mapped to allow users to pass architecture
variants via XARCH or pass architecture via ARCH from cmdline.
PowerPC is the first user and also a very good reference architecture of
this mapping, it has variants with different combinations of
32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If
the target architecture only has one variant, XARCH is simply an alias
of ARCH, no additional mapping required.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702171715.GD16233@1wt.eu/
Link: https://lore.kernel.org/lkml/20230730061801.GA7690@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This follows the 64-bit PowerPC ABI [1], refers to the slides: "A new
ABI for little-endian PowerPC64 Design & Implementation" [2] and the
musl code in arch/powerpc64/crt_arch.h.
First, stdu and clrrdi are used instead of stwu and clrrwi for
powerpc64.
Second, the stack frame size is increased to 32 bytes for powerpc64, 32
bytes is the minimal stack frame size supported described in [2].
Besides, the TOC pointer (GOT pointer) must be saved to r2.
This works on both little endian and big endian 64-bit PowerPC.
[1]: https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.pdf
[2]: https://www.llvm.org/devmtg/2014-04/PDFs/Talks/Euro-LLVM-2014-Weigand.pdf
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Both syscall declarations and _start code definition are added for
powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit)
to record the error occurred, and uses another register to return the
value [1]. So, the return value of every syscall declaration must be
normalized to match the __sysret() helper, return -value when there is
an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit,
glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register
to r0 at first, and then check the summary overflow bit in cr0:
mfcr r0
r0 & (1 << 28) ? -r3 : r3
-->
10003c14: 7c 00 00 26 mfcr r0
10003c18: 74 09 10 00 andis. r9,r0,4096
10003c1c: 41 82 00 08 beq 0x10003c24
10003c20: 7c 63 00 d0 neg r3,r3
Musl (arch/powerpc/syscall_arch.h) directly checks the summary overflow
bit with the 'bns' instruction, it is smaller:
/* no summary overflow bit means no error, return value directly */
bns+ 1f
/* otherwise, return negated value */
neg r3, r3
1:
-->
10000418: 40 a3 00 08 bns 0x10000420
1000041c: 7c 63 00 d0 neg r3,r3
Like musl, Linux (arch/powerpc/include/asm/vdso/gettimeofday.h) uses the
same method for do_syscall_2() too.
Here applies the second method to get smaller size.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As discussed with Willy, Paul and Shuah add myself as maintainer for
the nolibc subsystem.
Link: https://lore.kernel.org/lkml/7afafb6c-9664-44a1-bc8f-d20239db1dd5@paulmck-laptop/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It will help the developers to avoid cruft and detect some bugs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Binary size is not important for nolibc-test and some debugging
information is nice to have, so don't strip the binary during linking.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If read() fails and returns -1 (or returns garbage for some other
reason) buf would be accessed out of bounds.
Only use the return value of read() after it has been validated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Avoid truncating values before comparing them.
As printf in nolibc doesn't support ssize_t add casts to int for
printing.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
These warnings will be enabled later so avoid triggering them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows the compiler to generate warnings if they go unused.
Functions that are supposed to be used as breakpoints should not be
static, so un-statify those if necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Recent fix ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
had the annoying side effect of always returning skipped tests, which
are normally supposed to happen only when certain features are missing
to run the test (missing kernel options, toolchain not supporting
stack-protector etc). As such there are now always warnings. Let's
modify the test to not use the condition and instead use a ternary
expression to check the result.
Fixes: ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
Cc: Thomas WeiÃ<9F>schuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Otherwise both gcc and clang may generate warnings about type
mismatches:
sysroot/mips/include/string.h:12:14: warning: mismatch in argument 1 type of built-in function 'malloc'; expected 'unsigned int' [-Wbuiltin-declaration-mismatch]
12 | static void *malloc(size_t len);
| ^~~~~~
The compiler provides __SIZE_TYPE__ as the type that corresponds to size_t
(typically "long unsigned int" or "unsigned int"). It was verified to be
available at least since gcc-3.4 and clang-3.8, so from now on we'll use
this definition for size_t.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20230805161929.GA15284@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
getauxval() returns an unsigned long but the overall type of the ternary
operator needs to be signed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It's documented as returning int which is also implemented by glibc and
musl, so adopt that return type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add a test case of pipe that sends and receives message in a single
process.
Suggested-by: Thomas Weißschuh <thomas@t-8ch.de>
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/all/c5de2d13-3752-4e1b-90d9-f58cca99c702@t-8ch.de/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
[wt: fixed the "len" type to size_t to address a sign-compare warning
with upcoming patches]
Signed-off-by: Willy Tarreau <w@1wt.eu>
According to manual page [1], posix spec [2] and source code like
arch/mips/kernel/syscall.c, for historic reasons, the sys_pipe() syscall
on some architectures has an unusual calling convention. It returns
results in two registers which means there is no need for it to do
verify the validity of a userspace pointer argument. Historically that
used to be expensive in Linux. These days the performance advantage is
negligible.
Nolibc doesn't support the unusual calling convention above, luckily
Linux provides a generic sys_pipe2() with an additional flags argument
from 2.6.27. If flags is 0, then pipe2() is the same as pipe(). So here
we use sys_pipe2() to implement the pipe().
pipe2() is also provided to allow users to use flags argument on demand.
[1]: https://man7.org/linux/man-pages/man2/pipe.2.html
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/pipe.html
Suggested-by: Zhangjin Wu <falcon@tinylab.org>
Link: https://lore.kernel.org/all/20230729100401.GA4577@1wt.eu/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The other tests use 1 as failure, mmap_munmap_good uses -1 as failure,
let's fix up this.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If the test description is longer than the status alignment the
parameter 'n' to putcharn() would lead to a signed underflow that then
gets converted to a very large unsigned value.
This in turn leads out-of-bound writes in memset() crashing the
application.
The failure case of EXPECT_PTRER() used in "mmap_bad" exhibits this
exact behavior.
Fixes: 29f5540be3 ("selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRER")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a minimal implementation of setvbuf(), which error checks the mode
argument (as required by spec) and returns. Since nolibc never buffers
output, nothing needs to be done.
The kselftest framework recently added a call to setvbuf(). As a result,
any tests that use the kselftest framework and nolibc cause a compiler
error due to missing function. This provides an urgent fix for the
problem which is preventing arm64 testing on linux-next.
Example:
clang --target=aarch64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-Werror=option-ignored -Werror=unused-command-line-argument
--target=aarch64-linux-gnu -fintegrated-as
-fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \
-include ../../../../include/nolibc/nolibc.h -I../..\
-static -ffreestanding -Wall za-fork.c
build/kselftest/arm64/fp/za-fork-asm.o
-o build/kselftest/arm64/fp/za-fork
In file included from <built-in>:1:
In file included from ./../../../../include/nolibc/nolibc.h:97:
In file included from ./../../../../include/nolibc/arch.h:25:
./../../../../include/nolibc/arch-aarch64.h:178:35: warning: unknown
attribute 'optimize' ignored [-Wunknown-attributes]
void __attribute__((weak,noreturn,optimize("omit-frame-pointer")))
__no_stack_protector _start(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from za-fork.c:12:
../../kselftest.h:123:2: error: call to undeclared function 'setvbuf';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
setvbuf(stdout, NULL, _IOLBF, 0);
^
../../kselftest.h:123:24: error: use of undeclared identifier '_IOLBF'
setvbuf(stdout, NULL, _IOLBF, 0);
^
1 warning and 2 errors generated.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYus3Z8r2cg3zLv8uH8MRrzLFVWdnor02SNr=rCz+_WGVg@mail.gmail.com/
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the head comment of nolibc-test.c shows, it can be built in 3 ways:
$(CC) -nostdlib -include /path/to/nolibc.h => NOLIBC already defined
$(CC) -nostdlib -I/path/to/nolibc/sysroot => _NOLIBC_* guards are present
$(CC) with default libc => NOLIBC* never defined
Only last two of them are tested currently, let's allow test the first one too.
This may help to find issues about using nolibc.h to build programs. it
derives from this change:
commit 3a8039e289 ("tools/nolibc: Fix build of stdio.h due to header ordering")
Usage:
// test with sysroot by default
$ make run-user
// test without sysroot, using nolibc.h directly
$ make run-user NOLIBC_SYSROOT=0
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to run nolibc-test directly without qemu-user when the target
machine is the same as the host machine.
Sometimes, the result running locally may help a lot when the qemu-user
package is too old.
When the target machine differs from the host machine, it is also able
to run nolibc-test directly with qemu-user-static + binfmt_misc.
Link: https://lore.kernel.org/lkml/ZKutZwIOfy5MqedG@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The startup code is critical to get the right argc, argv, envp/environ
and _auxv, let's add a startup test group and the corresponding
testcases.
The "environ" test case is also moved from the stdlib test group to this
new startup test group and it is renamed to "environ_envp".
Since argv0 has been used by many other test cases, let's add testcases
to gurantee it too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
4 new pointer compare macros are added, they are similar to the integer
compare macros.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
move most of the _start operations to _start_c(), include the
stackprotector initialization.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
