mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,233,488 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Petr Pavlu
|
442466e04f |
xen/xenbus: Avoid a lockdep warning when adding a watch
The following lockdep warning appears during boot on a Xen dom0 system: [ 96.388794] ====================================================== [ 96.388797] WARNING: possible circular locking dependency detected [ 96.388799] 6.4.0-rc5-default+ #8 Tainted: G EL [ 96.388803] ------------------------------------------------------ [ 96.388804] xenconsoled/1330 is trying to acquire lock: [ 96.388808] ffffffff82acdd10 (xs_watch_rwsem){++++}-{3:3}, at: register_xenbus_watch+0x45/0x140 [ 96.388847] but task is already holding lock: [ 96.388849] ffff888100c92068 (&u->msgbuffer_mutex){+.+.}-{3:3}, at: xenbus_file_write+0x2c/0x600 [ 96.388862] which lock already depends on the new lock. [ 96.388864] the existing dependency chain (in reverse order) is: [ 96.388866] -> #2 (&u->msgbuffer_mutex){+.+.}-{3:3}: [ 96.388874] __mutex_lock+0x85/0xb30 [ 96.388885] xenbus_dev_queue_reply+0x48/0x2b0 [ 96.388890] xenbus_thread+0x1d7/0x950 [ 96.388897] kthread+0xe7/0x120 [ 96.388905] ret_from_fork+0x2c/0x50 [ 96.388914] -> #1 (xs_response_mutex){+.+.}-{3:3}: [ 96.388923] __mutex_lock+0x85/0xb30 [ 96.388930] xenbus_backend_ioctl+0x56/0x1c0 [ 96.388935] __x64_sys_ioctl+0x90/0xd0 [ 96.388942] do_syscall_64+0x5c/0x90 [ 96.388950] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 96.388957] -> #0 (xs_watch_rwsem){++++}-{3:3}: [ 96.388965] __lock_acquire+0x1538/0x2260 [ 96.388972] lock_acquire+0xc6/0x2b0 [ 96.388976] down_read+0x2d/0x160 [ 96.388983] register_xenbus_watch+0x45/0x140 [ 96.388990] xenbus_file_write+0x53d/0x600 [ 96.388994] vfs_write+0xe4/0x490 [ 96.389003] ksys_write+0xb8/0xf0 [ 96.389011] do_syscall_64+0x5c/0x90 [ 96.389017] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 96.389023] other info that might help us debug this: [ 96.389025] Chain exists of: xs_watch_rwsem --> xs_response_mutex --> &u->msgbuffer_mutex [ 96.413429] Possible unsafe locking scenario: [ 96.413430] CPU0 CPU1 [ 96.413430] ---- ---- [ 96.413431] lock(&u->msgbuffer_mutex); [ 96.413432] lock(xs_response_mutex); [ 96.413433] lock(&u->msgbuffer_mutex); [ 96.413434] rlock(xs_watch_rwsem); [ 96.413436] *** DEADLOCK *** [ 96.413436] 1 lock held by xenconsoled/1330: [ 96.413438] #0: ffff888100c92068 (&u->msgbuffer_mutex){+.+.}-{3:3}, at: xenbus_file_write+0x2c/0x600 [ 96.413446] An ioctl call IOCTL_XENBUS_BACKEND_SETUP (record #1 in the report) results in calling xenbus_alloc() -> xs_suspend() which introduces ordering xs_watch_rwsem --> xs_response_mutex. The xenbus_thread() operation (record #2) creates xs_response_mutex --> &u->msgbuffer_mutex. An XS_WATCH write to the xenbus file then results in a complain about the opposite lock order &u->msgbuffer_mutex --> xs_watch_rwsem. The dependency xs_watch_rwsem --> xs_response_mutex is spurious. Avoid it and the warning by changing the ordering in xs_suspend(), first acquire xs_response_mutex and then xs_watch_rwsem. Reverse also the unlocking order in xs_suspend_cancel() for consistency, but keep xs_resume() as is because it needs to have xs_watch_rwsem unlocked only after exiting xs suspend and re-adding all watches. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230607123624.15739-1-petr.pavlu@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> |
||
Arnd Bergmann
|
56fdaf48e7 |
This pull request contains Broadcom platforms updates for 6.6, please
pull the following: - Rob updates the Broadcom machine level code to use the correct DT includes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmTdOMkACgkQh9CWnEQH BwRkjQ/8Dl5BtkCe8xIx8rYbK+aghkbdf+YHYO9XLkfx3zhzORriwr2BvgMT2ZgO 4jp2FVUI9xKax++FlU6qWmNRLuylMoieOiCFWNpmIMps0xAZYZkJT+4dD8eAOfLI bc9gac7MqlqnZjdsP/BXDNrUmVw4DABRDAYl2CDGsnmeW2vU/0HAsLFbsEK798RJ WGlaUa+guCLH48JYpNwauwXpUa1mUn+tgwJvgNWje8gYHI6ndVV7+6kTfXqMFNB5 75y4slth/M+TEj0+IysBCV0yp8ERGmxA0Jggr6fRPHnR4bVCprJ9PDpVdKSkDLGv rAmihj1VM46nxMaj7Dugj4Q+1VjpovQuIf1VIvxWMb0OzsVq5YvzQRX5SsJAL4R5 wP3NosSu8knOAmzQeP5q+apjRTGEYUzHtGgpbb00LjjrE0MNFZhhTD15KqdMiSvP N7farfxQtllu9zy2r2bNHwzFNLn4M4PZvmRtV2kuFI0XjaYlpk+kjfswk5pzPyuZ i9QAe6WIeGFEJydh8+TqGHQrA+l3NKjRixrLqbMws86wybm2ZuKU6yxSKwWPs9LV cbju4Gkj3mxLmjoexmAaJ+NqNi8D2O8+TnouPZTO8EAKxlvobNWarip7SEqMYBT2 QXtQxA/SW/l639F4Y38jhVl8KCe2Q4uPaVGZqbUUW5aRbR0q4a4= =hHHi -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkGz0ACgkQYKtH/8kJ UicDBQ//WWTj6dTFup2EjQcTAXweRa6fCNLHPIjIDdR+/ybiUG7bL+NKbAmI9+Nl 3f2Dt1pq50bzfswDH/GB0CsvIYzsdCVdIo/Ffi719fh/K6pa5m/+4/HILYMHHkkG FlZX5dFRL9cfiAHDS8pOffirr8x+bSBBfvkG/RCFWEi47IH9eez20HcgOtLFuIYN B7GlMTMrJJatS2pYRf/XokOt74uaz1m7f/BOoJe+Z7GlpJwBTMesJjd9PsPSUgOF D/JGpmIJCkWgQWs6fYBHLtoON8jzHpzh1JyGu0/qIW9Mw0vYtKLLe5HoAmCwJl5j qdi1Xp2G6kpSdUwGET/8VNW0WhVHO877kMV2GB9KCYv5c6mq73bF/l0G/Fc2aX1P IPwtF2CTjYarIYESJcB4+Vga1+KjvVdWq+mruzz7mdJFcW1fuowbKSJAKkBDdbKc A4r5CmKyf9J0EYnl10+jBfBLXwmVV7lqGnF0xWPo6h0vUMbIC3p5GFf3JxgdP1PU pDuphEw/k8A+cq+fCZIP6twY0u76CtB2hCDXInv/Be7ruV1vO0rSH+6EvuKuLcz1 N9nNJIHG+cXlEUedb8jhPuHkYI7M7RnTLw3PWo4FFd6uQRBmZ8S9u03XBI91GUG9 x2WLWK6sEBRfjDj5BCA9l6OUcsovt2kNOJqMiMXXoaX8DooZKHU= =bYKS -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.6/soc' of https://github.com/Broadcom/stblinux into soc/arm This pull request contains Broadcom platforms updates for 6.6, please pull the following: - Rob updates the Broadcom machine level code to use the correct DT includes * tag 'arm-soc/for-6.6/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Drop unused includes Link: https://lore.kernel.org/r/20230818164539.2871539-4-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a9d3965f76 |
This pull request contains Broadcom SoCs drivers changes for 6.6, please
pull the following: - Rob updates the Broadcom SoC drivers to use the correct DT includes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmTdOIkACgkQh9CWnEQH BwQE8RAAj7lBzrIXudZfyVUSteJeWF6BD1QTV4Mw2RbdtfdwGa2Vf/G/sQbBgMhU 7AC1NFztHuVdch3L1/N+YAR5omqzASPI4sm34iwRLGBUUIhDO+MP4QfjapBLkqOr 4cU1t13BA75Cyl6l6Ra8TQr5TW3qfSotHwZKvj/QgXhiLCiF8FvTLlxhRCzZrdnb 9FdSGp5FTbFW833D0DS5EsTlk4kGV/+1bPJszStJBl5r3gqc/f9/c4Iq0oxWANFJ kEO1jNXxcx2wxcqgXUxux3VXdfY3fIhFBYXX6P3aMH0a6ItRcfnGDziizdI1jzuv NxdoJmXOCuj5c5z8R6ZFz7CITyd5hf9S4WMaxSd/2gR35PJka1oH7jrTEU3SjNex pnCwGNmXH/P61dVEiVKQdmN8Gz89nPSd+JlwGuNlXT8Fwe5ECTO1zNJKyrD5tyYN cKnOEsnn5DBWiQxVx7rMwES3Fv0iPNGX0uYU4l7gep6jS0YATA8FQksanr3AG3hX Bdd87JYeRiJHKhpaZbQsnm6RFs2MvI9wRJOzvYrDJu8NvwVDRdjfr3XT9T1bMjnm PZPdRQOV/PAp0HQP0x3wS35zMHhqQAaJE5zMbFbMrfTrTiwbgJ8mdEpHBP4H/94u htsFzGZQ4PcozuJTIU/5DiSDZzoU4ZnyvsPKLzQt+lX8ycS5cu0= =7rPB -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkGjIACgkQYKtH/8kJ Uids6RAArxRDa/VN0xX8p4xeN9mABu2gcHCPsNnyPMN60GRcm+T3OxEufFULCh4Y aA6YXyjcMtxuRRqPj6d1TRFv8UyK6vIlFA2Tdz6Dzts3CVcLVAZB/AS1dCY281MC yPDR3PguibOvI2E1r1ZNJ5nYtLRuS6ydHx/+ganYJLTR1rsdiTgc8BmM9RBKQibm 7ziWTqTY3jrwmelZDIxwRaAE919gbYLT6EurEwH7ncmjHSocGkvvzaLXDOWFH2qI 5sVbOkCGzD+mCuJk5C9Y2HpUAvsW3KAksSfPdzJ7wdq6Ky/DDsmOVTMB2tp2UVwd 1zePefNw4fHX2dzlMHJvtHBv/+CIDnLa1shtSyTY5Nmycmj50v3k192m1IBjgV4D pbGzbmu+woIikLZHNwU0Oz17nfZ4b4XH/RNqBIDNiIW93pH/zOwkSQaioXHShq5z JLPSol54kdGUUOEZU/E+3rzxMZvYhs/PXaIJHH95Fy/tIRrva8WKFwQVjRSJnguL CAF8GAo1840JqkVH9kSCPVYcG+eEwyFH7q8tXKkwyNI13asi6N6TqJom3OUUx7hk i4AjzHuo47ijT4+H5krviEI8NFj9FfbrQp8RyQreGxxsRpiHA0l/Y8VK318XWvIa mYlDv4mstsvZZkmVBu0RwhHd7t4ZYVpSUqxEX3f2KvaKHnZXEHg= =m5rK -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.6/drivers' of https://github.com/Broadcom/stblinux into soc/drivers This pull request contains Broadcom SoCs drivers changes for 6.6, please pull the following: - Rob updates the Broadcom SoC drivers to use the correct DT includes * tag 'arm-soc/for-6.6/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: Explicitly include correct DT includes Link: https://lore.kernel.org/r/20230818164539.2871539-3-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Kees Cook
|
99b415fe89 |
tg3: Use slab_build_skb() when needed
The tg3 driver will use kmalloc() under some conditions. Check the frag_size and use slab_build_skb() when frag_size is 0. Silences the warning introduced by commit |
||
Daniel Golle
|
90308679c2 |
net: pcs: lynxi: implement pcs_disable op
When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface modes provided by mtk-pcs-lynxi we need to make sure to always perform a full configuration of the PHYA. Implement pcs_disable op which resets the stored interface mode to PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI PCS driver had previously been deselected in favor of another PCS driver such as the to-be-added driver for the USXGMII PCS found in MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/f23d1a60d2c9d2fb72e32dcb0eaa5f7e867a3d68.1692327891.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Arnd Bergmann
|
924832b867 |
This pull request contains Broadcom ARM64-based Device Tree changes for
6.6, please pull the following: - Krzysztof adds missing spaces between node names/labels -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmTdOFUACgkQh9CWnEQH BwTMSxAAqp53NDlGkR41/2uTc2jKtoVPM4gvvHsN3ZMK87IYKPAB+3zSgO5I5ZLh nrFUt9n3tNnm/WmHtLGri7j1HuHuwtvT2P1PbxYbYiu5HzkzkvsrnUDpyJcA+EDA n6BiNTlENZCiMkkb9pcRNKVbr1wmbSKvJ7gQCYFpaKM0P16c+lsKPX6DnkoctVK1 44E/lkY4AbqLbPQhQMoZ/ER6x0aMfM5Foa/3fl5iT62ePsKzLk5Yqq7ioZmymGm/ jGHC4nc1I8WrNnuJD2pBmmtQArCJEWT3ztrM8R4Wm1QNAfLpjOthh48jh2TorvKF Hp4gmxV9IVbu2cIla0rU6Zlq+T67+xHfvs3oq+5xfkZ72dOQixP9UNFHA/Smv/S1 GsFsX35z1gqo6dBI/YKaB5kaR+cQ/YXMHx7/6rVoH6G3bLPSfVgyAxjVs+irwTYW QOk6YKKxaKqVDqi44yL2Y4RLgLSj51zY3n5075j+v3V1LP74et1oaXyqnRQjJoo6 amQh46VQhv7r05yTT33lPN78vtzahy2nLU/tQd/yTCK63Rfnwlke35wbtlOSden/ nPF0dCIznrUyF/KksOLId+ByeMfdK/ZjDlPghfy7wbyPQvUkQyf2IFqimaIX+mZs RoCM5r3wJ01u9R5RoASdy5OgzhnXc5S9aFhL0ts4OhKEjC3RoR8= =Wzyp -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIyBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkGH4ACgkQYKtH/8kJ Uid/SA/4q5n4l84xgPfDHjZeinRQuYq+2wwq6n6SiKS7c+6wyGWXGR5IUS6wP8Mv WlkrNFZeFp/0Ijw1oKCEbZB7ng/hVud6RHycYdvHU7aDvX1q2axpHH0kNpJl8D2I cZgfdWSt90K7kDz2F44lFqQSn8xK92D/Ojl7y7BKdOEIIKsqUPPTuHvWbqHJV12R skbhXfYtifmbViyCfTh9PYnECFtmM3WdS4ZLxcHVzIyKVaVcAvyteTJjGCxujdUc omCTDu0MCPtRgryvIuxtN8AxSOCW3fRDUpDpy3aPQQuAlfhfCcHrBRXwfOUdQZrh Un1HO/0jFBHbH8eHINGDj/MYgLmm8EpbHXw/3ZmlFYDGQoisgN/fRJuQhXoIwPkq W3xN7gtOhYibGlrOJf0Ii9LgHNMOPUT7UP8njTT/fmelpwT+MVhIg09vEUP7kZDu DVD9c+s7t7sTjk2hNkg1SJeCA9PKL990G5KY2MxnxQms+XoirCFJFypWfBzk7GIi IUb2HQkwXZIyqrcs113X5H3PTTkC8Szob22rb3+4bFjJ6TOYzez6g5vCQV3iqr8B vb2HCk4TD1FdeWHB84bxS0QKrDHDRiZfAjycomsAH3bMy0hJRKY+qDsab513km59 Z2EracriKpe/zAEMIGzbMZAddGlTK7En4SrHcUpYeNrRcJehpg== =Hi61 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.6/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based Device Tree changes for 6.6, please pull the following: - Krzysztof adds missing spaces between node names/labels * tag 'arm-soc/for-6.6/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: add missing space before { Link: https://lore.kernel.org/r/20230818164539.2871539-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Hangbin Liu
|
be80942465 |
selftests: bonding: do not set port down before adding to bond
Before adding a port to bond, it need to be set down first. In the lacpdu test the author set the port down specifically. But commit |
||
GONG, Ruiqi
|
e332938e6f |
samples: ftrace: Replace bti assembly with hint for older compiler
When cross-building the arm64 kernel with allmodconfig using GCC 9.4,
the following error occurs on multiple files under samples/ftrace/:
/tmp/ccPC1ODs.s: Assembler messages:
/tmp/ccPC1ODs.s:8: Error: selected processor does not support `bti c'
Fix this issue by replacing `bti c` with `hint 34`, which is compatible
for the older compiler.
Link: https://lore.kernel.org/linux-trace-kernel/20230820111509.1470826-1-gongruiqi@huaweicloud.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Fixes:
|
||
|
Arnd Bergmann
|
44762a0c82 |
This pull request contains Broadcom ARM-based Device Tree changes for
6.6, please pull the following: - Arinc adds support for the Asus RT-AC3100 router based upon the BCM47094 SoC - Krzysztof splits interrupt properties per cell such that they are mode readable and adds missing spaces in front of node names/labels - Rafal updates the BCM5301X DTS to correct PCIe, SPI over GPIO properties. He describes the Ethernet links to internal switch ports and then updates the BCM53573 binding and Ethernet properties by declaring the BCM53125 external switch on port 5, add Ethernet links and disables the second Ethernet MAC on Luxul devices. - Dan describes the Wi-Fi regulatory mappings for Luxul devices - Stanislav updates the bcm28155 DTS to use node labels - Linus adds SEAMA compatible properties to MTD partitions - Aleksey updates the Linksys EA6500 v2 to have the full 256MiB of DRAM available - Stefan updates a number of BCM283x nodes to confirm to DTS schema: pinctrl, DMA controllers and PWM cells. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmTdN44ACgkQh9CWnEQH BwQJ1w/8CZvX4GxA6avGC24VXYzOJ1jnahnp9Troi9XZ3E+yOIc8s/CXyOQJaEIk lAv0M7zc0UXubXmmH3ee8dHOunvs2KAPSin0JVDW/ybEZAAzPJCnz3lGT2Um2MEo hofiLXjcTGAIPHnyYif6K4U1UnABC+gXVCNgRZG2jkm9YUBkKWfs4drXzeagqm/k wrBuh2igB74zMhf+MihijqXSjJulVyuwUjT5d6siW7qSSw7HdRb0XrOqC2O9T9ou /qV2+EZSJuP0t6mB8nDOaMaLW8Xw1N9VsAXF0mY0BYwf9Om9rdqaUlGRs06Y3+VM INmp3kamh1Hcebr4U9PNt1I/VHQ7UQfAPJouslR9s/ZBdnCjVtzJ9gTmi3iZGlI7 N7srjUuRrhfC0ClEX6OTKB6PEutw5MlptKUAQLRCp9o8b8jJASu7k/8WXi/y1P67 JKbRri4/RdyxxPVSX922SeLj4iwoyibbiHrfs8xpzeqr99CoyXseVTqz+jf7jeE/ vTv+isOPs+dbCxDmO7811Ky7jBnFjr6G7q7fV1DnsxroAiuzkDCmJGFzZ5kVzD54 BfPPDyCRUTcJKLHENvJIS1mlXwviyIWpr2yEmvu0QKT0HptwGpBnWzfgT4lkJjDx zjGDn6RGKv4dDGqgt8ZZbINEvG4zjrPIE0zOyUU9DVJGWX5Arf0= =oQzu -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkFwcACgkQYKtH/8kJ Uif9SBAA42uEptTQi30DvBA2wlwm0B+usLO5sbbYNCBWg00q3THQHmdekiPjNIXH Vn948vXBtcfAOv73vmcv8j8JVsda8+qqM282FJymfS63BVwWWiDvVBoJS68Werxx w7GI8TLojiO3hkyrxQ48xeDLS1G8hEz8KHna7GVOXo9JEMzCpiEIhRAzSpYCpqmc y3OuCNsKmOvX7644SAj1v6S/ClRqJ79IluwPemSg8Z9R009chPr2c+wQUpFBUhX6 CZqdShCuaA+qrFWMtKiBQ8WTZmBbnwJa7/IS1T51YCduuNH+4YxZzuWoYm0IfXp5 /c4e3sZXuZD5M+cZo+l3u2/bPXyu7f8Nzw5Yioj288SbWP0K1m1j8VoytvWlJUxF AMiDc5wpAoCrfHoZTVcieVvYvWZW4y9RHFcmvJCgAEq+ID2J/C+D7tDfJEAr7RA0 z7gy2Uy3xkXiubl4OIrSwfKD2QUUAqaw02GOywDPRK77xcpmmKDc9FHtZ6UnaxQn 03i76CclUfdVTy6Az7HvJtuUZeB5JUGTVKyhSd829x80Ul3hy0vA1NNZKh7NN4nX PolybnJAHQXLTJswxPntrvu9NAJfBE3wQPk7nx/c+zQHPlDoNCIHpBFV4FqJTOmO W0DNY7qb0dmJdvkAJHfpm+jM0MELyoBwIsZq1TuFEr8lET6DeOI= =KAWz -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.6/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based Device Tree changes for 6.6, please pull the following: - Arinc adds support for the Asus RT-AC3100 router based upon the BCM47094 SoC - Krzysztof splits interrupt properties per cell such that they are mode readable and adds missing spaces in front of node names/labels - Rafal updates the BCM5301X DTS to correct PCIe, SPI over GPIO properties. He describes the Ethernet links to internal switch ports and then updates the BCM53573 binding and Ethernet properties by declaring the BCM53125 external switch on port 5, add Ethernet links and disables the second Ethernet MAC on Luxul devices. - Dan describes the Wi-Fi regulatory mappings for Luxul devices - Stanislav updates the bcm28155 DTS to use node labels - Linus adds SEAMA compatible properties to MTD partitions - Aleksey updates the Linksys EA6500 v2 to have the full 256MiB of DRAM available - Stefan updates a number of BCM283x nodes to confirm to DTS schema: pinctrl, DMA controllers and PWM cells. * tag 'arm-soc/for-6.6/devicetree' of https://github.com/Broadcom/stblinux: (23 commits) ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100 dt-bindings: arm: bcm: add bindings for ASUS RT-AC3100 ARM: dts: broadcom: split interrupts per cells ARM: dts: BCM53573: Disable second Ethernet on Luxul devices ARM: dts: BCM53573: Add Ethernet interfaces links ARM: dts: BCM53573: Add BCM53125 switch port 5 ARM: dts: BCM53573: Describe BCM53125 switch ports in the main DTS ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port ARM: dts: bcm28155-ap: use node labels ARM: dts: bcm5301x: Add SEAMA compatibles ARM: dts: BCM53573: Fix Ethernet info for Luxul devices ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2 dt-bindings: arm: bcm: add BCM53573 SoCs family binding ARM: dts: BCM53573: Use updated "spi-gpio" binding properties ARM: dts: BCM53573: Add cells sizes to PCIe node ARM: dts: BCM53573: Drop nonexistent #usb-cells ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger ARM: dts: BCM5301X: Add Ethernet interfaces links ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul devices ARM: dts: broadcom: add missing space before { ... Link: https://lore.kernel.org/r/20230818164539.2871539-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c708140e96 |
SoCFPGA DTS updates for v6.6
- Fix dtbs_check warnings for usbphy, sram, rstmgr, memory, partitions - Updated "stmmaceth-ocp" reset-names to "ahb" for stmmac ethernet - Add initial support for Agilex5 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmTg5+8ACgkQGZQEC4Gj KPRA7Q/8C6ugL9LlR5JEUruaAugaRnYL2BgotdwhMuCbU7d3oj+pFBzHR8PR/MCI CZXnLehpmwOkGz0K0QLey6nQuGZS18DK19DxJkL46hr69Rqpu8XHb2yPjiBtbh/o 0ZwpxuRTKz1QbP9hprw/RIHSbZ/AWaI2O/90xicC0p1qWXmxSz0Kv6YOoQ61o/yO On91yS3R+75o1NoHD+FoKiPuwwTfaHc7TrS/UIshPKAuk6yo/Cd3Is5EdYL+5xEz kXDRkt2X3g7il/Jm9AOFJvA4Q1VLD9Ke4C9o9ePvj167GklaLnJ9JT8Qw7PGXaoE wolse2+bJA4a9acPbkYmYSSyyKtZnIgV5oTXFgeWQ0eo0qmoTNqgx6eMIOyRltxs 3OTTvNyw9+ZOhW4YRv/lJWwDL3uMlKsMV/2JOSPua5V4kXrPi/A+HhIZGDll1Naf y+HYNoJiSrDAiNYwWglz4f4LR+xU3wc3cS4uLrAU+aCE+NHYAj/Jqn8/EC26NDbQ wVsPfQMQN9j0wCrMzZZf4LUEYM6C90ZeqUFqwB6mqctfAbT/fQyLdyKL8Gu/QrG0 lhp2J4vb2UJ9eQ1zBoBtb6flcQegHP/ybmRM4Q5ep3LvVOHhilZT5mO8mj36q84g 3Co2RqQ8oknTgmxTF93jguAW+JPtmfvwA66x+CetC0fSmSWN2HI= =OfJk -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkFA0ACgkQYKtH/8kJ UiejLBAAnafzyrMqZnO6nc6hvK/7ONSN2QZqaYoZ0Ho6fSvz5KxqVqPjUq4EshEZ HB9kZ42YvJQZYyi8Pvd/7BIQe3WvwLZ6tW4NALoiMsfpL127wzfwJlDj5yOiltLu aZtwhRvRV7jHKlh06wh8eax3vd4P3ozR5DUufcCJp59xI8MTS2UYI6enrIoA2h06 uC0xWhuEvseHdzYQbC2hAZlZA1Z/7BBYCJO5iKq5cdW0zHpy0h7h2k3ba2M2BsZM JtaIIyrjjF70nmydNY9UfHt0iU3u5InbZ7GdJEc9kkGsbB4fLiSUdn8ScPXShXaY W4qhsLQ9DhyDlkb+xmzkt2FRH9gh98xe2Ej4CmZM/4X3Xc/g+kquGZ4kHllNHJK5 AWodtDcrio3V7eCmiGerSBdvChr6pB31qVpuaCaiuCr+OpPZGdj/Z2c0qjCDo9h6 Pn8sH8jVgye3AQ30NmSrpJz12tN/H86BeiW59eFeJ3jRXi8qx7oMyyuLVNDzo+sF 6EkydHcSNrl0HF2gKQRSFMLvYfaYUZFBA/iSycrn24UjKc86DWd3aGbcofQSbJOV WeZAODlghXX9/R6yVKf4Vt/O6m3Lb2xreCilkIKJD5wpdQAu8hz7NXJAMtNJY1ed MKASPnHm1jP6Is/6acr5pDYFpbG3HOsyOxpzNQYRVHEFElMxQSk= =mFST -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.6 - Fix dtbs_check warnings for usbphy, sram, rstmgr, memory, partitions - Updated "stmmaceth-ocp" reset-names to "ahb" for stmmac ethernet - Add initial support for Agilex5 * tag 'socfpga_dts_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA dt-bindings: clock: add Intel Agilex5 clock manager dt-bindings: reset: add reset IDs for Agilex5 dt-bindings: intel: Add Intel Agilex5 compatible arm64: dts: socfpga: change the reset-name of "stmmaceth-ocp" to "ahb" arm64: dts: socfpga: n5x/stratix10: fix dtbs_check warning for partitions arm64: dts: agilex/stratix10: Updated QSPI Flash layout for UBIFS arm64: dts: agilex/stratix10/n5x: fix dtbs_check for rstmgr arm64: dts: stratix10/agilex/n5x: fix dtbs_check warning for memory node arm64: dts: socfpga: stratix10: fix dtbs_check warning for usbphy arm64: dts: socfpga: agilex/stratix10: fix dtbs_check warnings for sram Link: https://lore.kernel.org/r/20230819161418.931258-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ecd2dc2f34 |
RISC-V Devicetrees for v6.6 Part 2
T-Head: Add a second minimal devicetree for the second board using the th1520 SoC, the BeagleV Ahead. As with the Lichee Pi 4a, this is sufficient only for booting to a console, with work on the mmc, clocks and ethernet sides of things under way. A relicense to a dual licence for the existing devicetree files is also done, for good measure. RISC-V Devicetrees for v6.6-pt2 StarFive: Fix the sort order of some nodes that I resolved incorrectly during a merge conflict. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZOCDsgAKCRB4tDGHoIJi 0mEDAQDc1z032ZsKJSE/WBV0R8hw47RZoP22xHCP3d38vDfP3wEAsF6Kc0U+t8TQ 6CNGHUNpEkVJIdj/wOL8Zk0gV/GdLAA= =F146 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkE8sACgkQYKtH/8kJ Uido2A//aml2dM6R2eG3Nz5jX0xtAwE5xGix/pHW0eG4Z3c3YFsb6R0cnjO4DLjg MwPrfQl9M7ee2obKsUqOAnD7QgZnP9ewSCOrPqWFn2YKcmA2mZcby4u1qd1m2+Gc UZrvXqoI1ixK4gTxfcfBJI//8ui6AOHMtDvkWlRXCbcMCEruF5NCGNHkDPxve44z 8R/PJUAXEkBUG7mEgnQKTuRgn/Gwgrn0cZKc7YNehAq0SAeihyiRqNNjD/+ftTrl xVrU1RLY/P6dxMP1l3wCxhhM7LPqWSzNflNgAu37A7PmzieYu/FExnW/NuQ3m9UA tzeMGUS4FWkvJKRVwYmzY+SpT4/9SgswUiRoJ6HKCxC63+TMLH6BBJ0HsTFnctq3 mvjqx5kcqe9RVdrJBPSbYuH7xdbvWD2I+m7IQnuOvkwPghRuBf2q6HQ2L2ah7WlJ ZOcJ82/kUx/Cb5o0hDMvKVfU+ZUGoDPWKfqpqVfftgh5TTOoZpmMfMclwSG2zw3/ PoXLE+dnYCBtynAYAbX/Z5YPIdV3WL5/TJEAVIgyFBKPcUsi0Hc841gkymur1lCr fd+scjRCON1zV3EILI/CDEwXToyVlPqMSznjj+nm3sV05tCUA1GQ8I/RsnwbFSsP /gNtPJ9fJRKtfTrU7lLdaaauk+aoRvRud3XQpwYmCfWLCDJ+ciQ= =3ypd -----END PGP SIGNATURE----- Merge tag 'riscv-dt-for-v6.6-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.6 Part 2 T-Head: Add a second minimal devicetree for the second board using the th1520 SoC, the BeagleV Ahead. As with the Lichee Pi 4a, this is sufficient only for booting to a console, with work on the mmc, clocks and ethernet sides of things under way. A relicense to a dual licence for the existing devicetree files is also done, for good measure. RISC-V Devicetrees for v6.6-pt2 StarFive: Fix the sort order of some nodes that I resolved incorrectly during a merge conflict. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.6-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles riscv: dts: starfive: fix jh7110 qspi sort order Link: https://lore.kernel.org/r/20230819-unwieldy-railing-9bba2b176aa7@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
6522fbd48a |
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is added. The IPQ5018 platform is introduced, and the RDP432-C2 board thereon. A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based LEDs and buttons. On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added. On MSM8916, the D3 camera mezzanine is improved and refactored out to its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with charger, while Samsung Galaxy J5 and E5 gains touchscreen support. A few fixes for MSM8939 are introduced, and initial support for Samsung Galaxy A7 is add. Support for scaling the cache bus fabric is introduced on MSM8996. A missing interrupt for the USB2 controller is added. The touchscreen vio supply on Xiaomi Mi 5 is corrected, and a few other cleanups are introduces across other devices. The display controller is introduced for MSM8998, a few clock fixes are introduced and missing power domains are added for the multimedia subsystem iommu. Reserved memory-regions and reserved GPIO lists are updated for the QDU/QRU1000 IDPs. USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is enabled for the RB2. PCIe and Ethernet support is introduced on SA8775P, and enabled for the Ride board. On SC7180 the PSCI integration is refactored, to allow supporting devices with the Qualcomm firmware. BWMON is introduced, alongside the CPUfreq-based bus voting. A number of fixes are added for SC8180X, on the Primus and Lenovo Flex 5G devices pmic_glink is introduced and wired up, to provide support for external display. Missing SCM interconnect is added to SC8280XP, and the PDC is marked as wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is corrected and a few regulators are renamed to align with schematics. The Lenovo Thinkpad X13s gains camera activity LED and a set of previously reserved GPIOs are released. The SA8540P Ride platform gains RTC support. For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced and wired up as wakeup-parent of the TLMM. On SDM845 the UFS controller gains interconnect path description, power-domain information is added to GCC and minimum frequency of the UFS ICE is corrected. On RB3 continuous splash memory region is described, and the camera subsystem is enabled. On the Lenovo Yoga C630 a missing power supply for the display panel is added, and the debug UART is introduced. SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75 PMIC is described and added to the IDP. GPU description is added to SM6115, and together with display enabled on the Lenovo Tab P11. On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU is added, and the PDC is registered as wakeup-parent of TLMM. L3 cache scaling is introduced on SM6375. The DSI PHY compatible and an interrupt for I2C7 are corrected for SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected. On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node gains interconnect paths, SMMU is marked as DMA coherent and dynamic power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line names are updated. On SM8350 missing cluster sleep states and LMH interrupts are added, the CPU compatibles are corrected and APR and LPASS pinctrl support is introduced. The HDK gains uSD card support and PMK8350 is added. For SM8450 support for RNG and RPMh stats are added, the ICE handling is extracted from the UFS node and the display subsystem gains a missing interconnect path. Thermal description is improved for the HDK. On SM8550 MTP and QRD the pmic_glink is introduced, to provide DisplayPort output. A missing regulator supply is also added. A few platforms that happens to share the RPMH power-domain resource identifier constants are migrated to new generic defines. ADC channel names are generalized on various PMICs. A variety of devices gain chassis-type, and the GIC_SPI constant is replacing the 0 across a few different platforms. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTgOtYVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fr20P/jDKWelSMYqeVFfa49XGXyvRwWmf TaSb8IlD9cqQ3ScFYwmJGf2gVqt7zBfGU2EoxkMbpFeGjyZZYpw86Y3fvU1A5oxy TQ++kBQAvuSGEUqdGE7Xv6lIUmKPyVmcayRpI6IgGI5iaU1y5bI6xmh3bjhL//NQ mcsH11SLPPvDyZ608Etvw1rNtPImSI8nOucaBSlmnkxT1NuzIjPhNG+rNwgBSBHU O8sKi80hYrVw78sR3sXH+cBCCMhkFg377maCo9ZE14TFdAT3Ggn2uXX01PXCvn1z cO/wFAZ5vOe4KU1+maWkvOsEOCqjghdFUoVK7e9xtMpeuhoXjAuFf1L26d02mOK3 I48/apsj8ak/kmC89eo1RrOWniytI+YGPZwd5wYIOh0Q2oS8+IpC0nZhm9V86IIU DoWxbdf0TZ++e3D232AftFqKutbL9utJanq9l34zmI50F7QK4BSbBRKT81pRTrml y4tR7bukrGYKVRq3Kpf5vyWwPEpYIfZ7o9k6J56IcaLoaMvctW/vcnf8R0Qr5gJb 3vHUEBsozERKd2NcFw9g1Ay86DbAxC+3wyfHHMWgolA7fYCNVSXN6R6hKXb6d503 6ORnP4U6NjxpibIXC3jj+zmvbUM/GhSgrw3yErPb83n9P9pJ5Aw2+6J+Xmt75U5z 9hyHUWkbhyNQqBVA =uK0C -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEYEACgkQYKtH/8kJ Uie31xAAvhedx3cixHT570K/qxw8tTM06btXNhEek+/oMiW5eCcGKCRW5ixcpPog 9sLGI4xt5aMVdJshIYWovCDpCQWCoSYiqFx9N2/2zF+DrXYjeKNCpU6oVcPh1MG7 Xm5Fy2s99BipT6z6ha5kqeirdgjH+po8Jtkw54AfROzJa2oTD6GBvsPtxxW3CYgJ lDoHTvU59gwl1Dk60FIkc2slyA57VqqRuVLAmurgO2nGOFU9FODb/lNuMIh8AeKt +scXrEVozQPDeefSCbKTqROBvIuYyMbXmFHLW+VmM9EgXnOcV2IEVOSZCiMYi9Ic RWpfOHVAn9xM/zFhHh23onJPUrISwcJv05A1PU92WFNWh7uoly67KD712gPStwmd /rKI25DPk3Z7nc7LwzO5VqovOpU9Q0t+/NDOLiRn1A8/hljqVMhq8eTo9AY9sBJN EW5AZw1KUzrXH+9RQsNKDAJckpfgDaI8sB+ueXOZMHHhhKaugMILp/PgpN6isQZu G7ZkJadpQBliJ3pvsHpK6JlXcJoB4TafIx7pJPDCHbAFOnMhCmEUPW7TX36n0uQ3 4d/ghMENBmDWkmZGlFLtl7SfKNmuT/HQhcG75QZxqPiw/uhRGepNaswqtkpMMeFD Vl+spE5wosXSG8Ra2W/UJfNfEKYL1TKevPwJXZWmT9WUehMSG+U= =zUL1 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.6 Initial support for the SM4450 platform and the QRD device thereon is added. The IPQ5018 platform is introduced, and the RDP432-C2 board thereon. A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based LEDs and buttons. On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added. On MSM8916, the D3 camera mezzanine is improved and refactored out to its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with charger, while Samsung Galaxy J5 and E5 gains touchscreen support. A few fixes for MSM8939 are introduced, and initial support for Samsung Galaxy A7 is add. Support for scaling the cache bus fabric is introduced on MSM8996. A missing interrupt for the USB2 controller is added. The touchscreen vio supply on Xiaomi Mi 5 is corrected, and a few other cleanups are introduces across other devices. The display controller is introduced for MSM8998, a few clock fixes are introduced and missing power domains are added for the multimedia subsystem iommu. Reserved memory-regions and reserved GPIO lists are updated for the QDU/QRU1000 IDPs. USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is enabled for the RB2. PCIe and Ethernet support is introduced on SA8775P, and enabled for the Ride board. On SC7180 the PSCI integration is refactored, to allow supporting devices with the Qualcomm firmware. BWMON is introduced, alongside the CPUfreq-based bus voting. A number of fixes are added for SC8180X, on the Primus and Lenovo Flex 5G devices pmic_glink is introduced and wired up, to provide support for external display. Missing SCM interconnect is added to SC8280XP, and the PDC is marked as wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is corrected and a few regulators are renamed to align with schematics. The Lenovo Thinkpad X13s gains camera activity LED and a set of previously reserved GPIOs are released. The SA8540P Ride platform gains RTC support. For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced and wired up as wakeup-parent of the TLMM. On SDM845 the UFS controller gains interconnect path description, power-domain information is added to GCC and minimum frequency of the UFS ICE is corrected. On RB3 continuous splash memory region is described, and the camera subsystem is enabled. On the Lenovo Yoga C630 a missing power supply for the display panel is added, and the debug UART is introduced. SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75 PMIC is described and added to the IDP. GPU description is added to SM6115, and together with display enabled on the Lenovo Tab P11. On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU is added, and the PDC is registered as wakeup-parent of TLMM. L3 cache scaling is introduced on SM6375. The DSI PHY compatible and an interrupt for I2C7 are corrected for SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected. On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node gains interconnect paths, SMMU is marked as DMA coherent and dynamic power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line names are updated. On SM8350 missing cluster sleep states and LMH interrupts are added, the CPU compatibles are corrected and APR and LPASS pinctrl support is introduced. The HDK gains uSD card support and PMK8350 is added. For SM8450 support for RNG and RPMh stats are added, the ICE handling is extracted from the UFS node and the display subsystem gains a missing interconnect path. Thermal description is improved for the HDK. On SM8550 MTP and QRD the pmic_glink is introduced, to provide DisplayPort output. A missing regulator supply is also added. A few platforms that happens to share the RPMH power-domain resource identifier constants are migrated to new generic defines. ADC channel names are generalized on various PMICs. A variety of devices gain chassis-type, and the GIC_SPI constant is replacing the 0 across a few different platforms. * tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits) arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins arm64: dts: qcom: msm8998: Add DPU1 nodes arm64: dts: qcom: msm8996: Fix dsi1 interrupts arm64: dts: qcom: sdx75-idp: Add regulator nodes arm64: dts: qcom: sdx75: Add rpmhpd node arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75 arm64: dts: qcom: Add pmx75 PMIC dtsi arm64: dts: qcom: Add pm7550ba PMIC dtsi arm64: dts: qcom: Add pinctrl gpio support for pm7250b arm64: dts: qcom: sdx75: Add spmi node arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU ... Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
3b6d013cd0 |
Qualcomm ARM32 DeviceTree updates for v6.6
GCC and LCC clock controller parent clocks are introduced on MDM9615. The newly introduced RPM representation is introduced across multiple platforms. Voltage ADC channel names are corrected across multiple platforms. APQ8064 gains a definition for GSBI4. The XO clock for SDHCI is corrected, as is the USB node name, on IPQ4019. USB node name is also corrected for SDX55. The correct PMIC is included on SDX65 MTP. The incorrect spi-max-frequency property is removed from controllers on IPQ8064 and MSM8960. OCMEM and the display subsystem are added to MSM8226. Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a few properties of the Sony Xperia Z2 Tablet touchscreen are corrected. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTe3BoVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F5EYP/28mGUDkCDNV+b9Hbu5OodcA1ODm gzwj101TWeIRN/i3xQsNP5xvbg+93j7T0Qp5kgXda2F0v2/THM+/NI2A/KpMLl8k lMz9f9PK3w4aXrtzRekHGiVp29ibkluqD659eCTd4AwLXy02vDkdUqm8ESteWFwd bl6bmdEmZCvAHiWCHUaydF32hLUUwsuU21/P52LYgYeOg84tf4gRh8Y8DNwcUPvs J7lsEmwhHesdWplLOB1d0KJfaNQsbsxT3cUYNXPF8ypVoDKGhccPkWdD2wlKVSAw ROSJntqXsnfAgHzg9E01V+Ibyb1AFo0dk6TlSgxoN9oY+PD0ngYtgKOkAyKo29sR qIQ/XlgBRI/br9QsmCNCIAMILyZDc31BsI4/TzsGpnjDKzVeMLkEDOJpHlepjXg+ GAUOiFQjwGsXqaLSrLDfwJghJCS2z01zClZvZA+F/GRIgf6nK5rpqwP8gU9LIhgz exrM3SJdynG7Pk5XVd5Z5kpU5ylcMj3UQpScsY7R7BN9FlAdj5PNEgbNheiYDYqv k0A1NTZ32bWebSWFIo48+MBTykk2Vvq/RwnT61M8mDnTApMW+qgDlhHkYjoCiJtL 6Sfqqx/bsZ5SG8iFmIOQ2MVgIf+plguo+Vgw9LnpmbpJW7jUqT1ToqWCfk8WCgHN WjebHkq4Hn+K6iNW =uBzp -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkERwACgkQYKtH/8kJ Uic+LRAAppiZeEIMyI3oSpgVZktP8EAAqsgKA3XqEkRFdWvShCZTrVN6yhiV2F8K JsqKIU50kkBDS5qjkSVlaiP1tXyn+JMTukG76pBCkdglfIeLY4MiYglHD7w1fwn2 3fduLmkD3aK3q1XkRYWQ70AgK2ES9yYzyWR3r3KpOwvz38lJ59cA/2OfO/9WXJnI i2vhzwtPIMsgCm1aujZHBYykNpWCjJUlsFeJTeMk4t1oRT5kt5TkL0JYyVEl563X yhF3zDgwbvxOoYtvQHFBmIMdWSpVgw966YmR7dMDp6c+D+X9H3COXhnIaF80HHmc LUMIZHRVw5zrXm4f/PTyxlYN8Ma1BoqVYtf38GnHQ+95TLmFbfOg5tnuk0uMgq3O hddN7ovAGiWWbMHFD7k+25P9suvqgumB4SMStlZx3KZFuG6fO1OVsQVwaHvz2oWx XndLZKi62Yisclq3VnGEva8iCvBnMb59PiCVh2vTNFUizETZt62n9k4sNPt0xDPZ IeObqYb1PxmLmbz9o41A2pulUIHRk9Yp5vt1fQFiTWSk0vVMeTicyhWIf3rCjUNy hiPQl7SNZhxIsX5rV+yKNFQN4JHiwGyeIXSstO2BjgmZoPbSZbw0s8tr0bZoVp6T ap5tgRgp0gCTBJAxCb+dzQrY2Ahuy5+AJ1GLABhzZsp3Qx3mquk= =38r2 -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.6 GCC and LCC clock controller parent clocks are introduced on MDM9615. The newly introduced RPM representation is introduced across multiple platforms. Voltage ADC channel names are corrected across multiple platforms. APQ8064 gains a definition for GSBI4. The XO clock for SDHCI is corrected, as is the USB node name, on IPQ4019. USB node name is also corrected for SDX55. The correct PMIC is included on SDX65 MTP. The incorrect spi-max-frequency property is removed from controllers on IPQ8064 and MSM8960. OCMEM and the display subsystem are added to MSM8226. Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a few properties of the Sony Xperia Z2 Tablet touchscreen are corrected. * tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: apq8064: add support to gsbi4 uart ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65 ARM: dts: qcom: ipq4019: correct SDHCI XO clock ARM: dts: qcom: Use labels with generic node names for ADC channels ARM: dts: qcom-mdm9615: specify gcc clocks ARM: dts: qcom-mdm9615: specify clocks for the lcc device ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen ARM: dts: qcom: apq8064: Drop redundant /smd node ARM: dts: qcom: Add rpm-proc node for SMD platforms ARM: dts: qcom: apq8074-dragonboard: add resin ARM: dts: qcom-pm8941: add resin support ARM: dts: qcom: minor whitespace cleanup around '=' ARM: dts: qcom: msm8960: drop spi-max-frequency from controller ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller ARM: dts: qcom: sdx55: use generic node names for USB ARM: dts: qcom: ipq4019: use generic node names for USB ARM: dts: qcom: msm8226: Add ocmem ARM: dts: qcom: msm8226: Add mdss nodes Link: https://lore.kernel.org/r/20230818024928.2485173-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
59486969f4 |
Basic graphics support for rv1126, some more new peripherals for it as well
and some improvements for the edgeble-neu2 board based on this soc. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQ7IQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgcRZCACtZP2dByueGP0I1NA607XfCTXTDsdq1hjM We/+nIMGLXjaG+SWuVvCcvXyE6MW7cg0UIquNCowhCzyKjhAhNXGjkCskAekAx3c XIuW6VkZ7Qmfp1OWKqiI34xx5NOUNVZl3llAe8wZFjZZd+fVjv5Ao11p5IRDNzOt iFCO4SSU9KqeZYFF04VQFZb35p0WSaCWdY4iDPGRqvD/lMtlrL+3lx09uZ0B+yUz pVErjD0MWO/pmfN9JCwFlWg7TISfxl5nOqT+PKsp1WshUkema21+in18Uh0An1l9 eYE+bvdwliw6rqBu2587vo3OpU/VygArEPBroaBwboHdpBKCbzHS =VMKL -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEGMACgkQYKtH/8kJ UiejtQ/+LZzxmRuuRTqdO1hXpuK5rSkJsdS3j+YYuqVRDo1mp+2bBxERsVK4JU2g zLbw4LtcfKL0RU3TdEm2p6G2MiU2IV2Aqo/bIyJLSMe92N1jM86Fj9N3NG9uRkHd jLxxcvWsBeHTQA1goGSGeXK8iZ9wE08C+K1OC3FLyS5TzD+lnWnVadeGY3wOKTG3 CkX/Zu3q7n7Qk2jlduoG4ac7iJPM1Jj76LX2H/7Rkwg+ckIMWwK5nuvX74lDHqMK SvjvM6V3a6j9PTb1ihckVA/3BHZ93Wd7jj4pWysm63uCpIMPFTqoy/3nHI/oeIMy 7ryfAS+Zdra9FUPuY51tbF7ulpFZ3OUh0b59/QYW1T6AXoWqsHkgPShv/6tYYqI7 aJxvIqoCffrTEYhjkt8ZyP6H5Nx+bq4xSf3MSGwgynoMJtaGgsd2It83q8cuQOM8 DV6Oq2DVOKl84D288I7evD9aB9V2cKFikGp1h387hIsMpSusMdDKNRAnnGhP3sTW jRgVohL6Lh8Jb264C8Ss7B9Jq0nsENSutprqhAnh0XknfV3XKUwjo03gS/YukpWs jCz8hhGp3XBxdOhJbfVwLxbK958J8el1Omu909fOInN23TeWNmLzBVhj+W+Hn3Vk XXo9LNs+3IiQbBhDZT9qU2lvXrteFi+BKpZHPhRy3uP8UCyGqxo= =1u7+ -----END PGP SIGNATURE----- Merge tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Basic graphics support for rv1126, some more new peripherals for it as well and some improvements for the edgeble-neu2 board based on this soc. * tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add rv1126 VOP_LITE support ARM: dts: rockchip: Add rv1126 PD_VO entry ARM: dts: rockchip: Add 12V main supply for edgeble-neu2 ARM: dts: rockchip: Add 3V3_SYS regulator for edgeble-neu2 ARM: dts: rockchip: Enable SFC for edgeble-neu2 ARM: dts: rockchip: Drop EMMC_RSTN for edgeble-neu2 ARM: dts: rockchip: Add rv1126 uart5m2_xfer pins ARM: dts: rockchip: Add rv1126 FSPI pins ARM: dts: rockchip: Add SFC node to rv1126 Link: https://lore.kernel.org/r/6299163.hdfAi7Kttb@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b89c940f2a |
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc (PCIe2, PCIe3, USB2, SATA, Combo-Phys). Improvements to the Rock-5a development board based on this soc (saradc, i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card, some regulators, pmic). Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata, sata, sd-card, pmic) RK3399 got the PCIe endpoint node when used as a PCIe-client. And some minor changes for some boards: spi-flash for RockPi 4, SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios on engicam and gru boards. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdRnwQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgcffB/4sR8h7IBNMN/0yUyn1ALlAZWt6K9mNQbIq 0mRMJHllMeefLL952Gsnpw3uj6mz/GKIa0H0g88giWMJOOknH/zIKyYE/9Li0WwO KFoF2KA76JQlN+Dv7qHfhv38Q996/AI6Bc1dGcU1x611/jZlbZojXqnBKvT4RyFJ rbRvD6nF8LeW6yQP1u+4wA2UnHonYJstU6bEbAf1KXofQIzcspDBzKHuQtza152F 3YVR5+yCIG4zFVSksvX5+DkJvvYYP/dkLftrh69dgYNHDcXonHYLNkR9E05kWL+/ xhH58h20b/tBonJoh2ZSNKdZSvv2w8BdCQP/SGn54YQ+8nclsnFI =g1qK -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEAAACgkQYKtH/8kJ UifOyw/+MnuyOqhjWQrDUsxsxULVsBUn71RsYXz9jPcrZSkeD4RgyqxIlBtJkMxf xBclgRHMVr6AAnz8UNjpdSSlJFH9Kr6inoNwdpWZB9UqEfZIQb5RJnDkvgyR1CA5 BmE0Xt6usuPsDEsgvUXQVdbmQIKB7H3ZxW9Jx+gTbPcR0Ktm5EIZ0tI6B6Hq2i42 if+Bw9JrKCucsb8NAuyClslXRXHKxOZLEVuatlOpUf+tMaDF1vAmWhtc7QMQ8OWV Io7OVCQIiFo8+b8gHg6qWx5zqrjVUY55VpP/R5+5tj+vYU/+bLbmUAMbGDNi8utM WbGoXCZBBX9SBQFSQ5mp5sDwXFZR13nN4vqwkGEBdHWIeZDBvVf+og/V4KTxhpQB muQLS4OizirbOZV0mU1t/Ds5ZlrllKA3jI5fDM6HIL/tspEIxHqLgJd3Z5Og9Rn5 mzIgP+gjqc7Pl1g5KGmyu8Y5btEj/WSKNY4CBOPDCTW1TCshgP26pecp8cV+bKhe e1z7hqXL2romDinDeBVJFrNQhX2Ki/xoh6DwE7Tkf9o00aNftIBbHqeXYaJmK4Z+ jpA6ycOY4LHBfrT7Y1XWLVGPYHq/2yaYZmdWuSHmNIGVgXJEVtv0q35KPabFGQSq XkleG8IPC3XCX5OZ9xVfVwUmVVhRW9f5X9VEM4leICY1xJ0tFoY= =XITG -----END PGP SIGNATURE----- Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE. Many new peripherals for the still only basic supported rk3588 soc (PCIe2, PCIe3, USB2, SATA, Combo-Phys). Improvements to the Rock-5a development board based on this soc (saradc, i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card, some regulators, pmic). Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata, sata, sd-card, pmic) RK3399 got the PCIe endpoint node when used as a PCIe-client. And some minor changes for some boards: spi-flash for RockPi 4, SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios on engicam and gru boards. * tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits) arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support arm64: dts: rockchip: add rk3588 PCIe2 support arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C arm64: dts: rockchip: Add NanoPC T6 dt-bindings: arm: rockchip: Add NanoPC T6 arm64: dts: rockchip: Enable SATA on Radxa E25 arm64: dts: rockchip: Fix PCIe regulators on Radxa E25 arm64: dts: rockchip: switch px30-engicam to enable-gpios arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios arm64: dts: rockchip: add PCIe3 support for rk3588 arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b arm64: dts: rockchip: add USB2 to rk3588s-rock5a arm64: dts: rockchip: add USB2 to rk3588-rock5b arm64: dts: rockchip: add USB2 to rk3588-evb1 arm64: dts: rockchip: add USB2 support for rk3588 arm64: dts: rockchip: Enable RS485 for edgeble-neu6b arm64: dts: rockchip: Enable RS232 for edgeble-neu6b arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b arm64: dts: rockchip: Enable RTC for edgeble-neu6b arm64: dts: rockchip: Enable SATA for edgeble-neu6b ... Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
aa2951a8fa |
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
-----BEGIN PGP SIGNATURE-----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=oGBN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fz66
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
ARM: dts: stm32: add touchscreen on stm32f746-disco board
ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
ARM: dts: stm32: re-add CAN support on stm32f746
...
Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
d2dff8d84d |
Qualcomm ARM64 defconfig updates for v6.6
This marks the MSM8996 global clock controller as buildin, to avoid boot issues. The SC8280XP GPU clock controller is enabled, to enable GPU support. A series of drivers needed to boot the IPQ5018 platform is enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTe2ScVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FccQP/1G+Cq12q0QziyKiDr7bb8uKPuUV XPauw4hfsBXN6VXzftfJGxBtihf/WVTS93i/NdhWYP7x6ylLU9AIVihjN9Bls/nT 2zEoWfzA0g8HtEctHUanI97ZvJi18MBzaVuXKzlh1rfISDVqo5aqyK3e+FXFKoBO Np7Y3dHmpDxW6okEHOZlVDsU7JVnYc5XnX68KEU6Mu0+VbZWGyTZ9mqFiAagkc9X vmLbCiZwOMRJ9FTZnvn3wvIM+GHWfyhr3ouLyDKEhrYTGC/hM8ODp0kR7No9ecnu AjSfIt+F5dnodL8U1WpwHSKK2uiranuzTQieI4wGyjc2nknEjPY+fnVWiunNI3wr HVFzsD+u6p6nDJR/py945WdUNo6cL6Yp1+sUZqFyyj/Q1UwvAkOkVo0HSP0ig2b4 iTHFePjZ6aLDiDVh9t7zqfCmx8nckgEqwNJCSNW9B8FSxinuc852K6OIwGDPrS7o ZthGlFVgE0ss28XHnlfbNNjMu41Md4LJITPzGLlf9XUfoLfbCr/g0Zp2PzN/4TYD Isr1csI7GoaG6eMRGeLx15r8vZ5b9Lr8uMf3G8iZ+mgXfaf8UADoqzBNda5vT6hY hGwgrTbCv/qMqXTZnC67bLEymoLjulAFRZR+l1aKm3lYQs5BNdYr27/A5KR2EgHZ Dv1eA2/BHTD6yiMl =Fk9Y -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkDZ4ACgkQYKtH/8kJ Uic0IQ/+JJ8vGyJQBHJWimvx9Fsmts2NlGMMEpb13t9RHui7WvhL4LEd60sUsDW/ e0dioMLPKFUqtobfLixgiz4oVuIjUqWd+mjeUqGNaaK232WCh+MhncHw+HStFwhX ntpv+4sI1XU0Bf3toNdAoWKZI5Mm6VNTMFwwNHy+dSA5XqhUHtmUwBS2+vYJjngW STRU6xRpS9e5SEEuUT5CcRUptqXSxI/cbO6RwPDGxeCfMplRI/aM7WIcVoqVdtRR 5SBu3x84blfBprol81rLC1ijO4DJzyGfCUamm393Q/GRCp6/+vRys+fde+10xZan +XBIR66jeALEFzPzx2+jBCiEVCKc8ekF4f065eeY5yyazfjofGzK/uB2YTizm221 i98amtFmX/pwNkg5LVH1JFydNJOEZQYU2w5G9UKtm6lo3sznYqsgq+6uwEuxRu0e WeVutfGdddLN4GS4rlKDgOFvWZ6PM+JUBANkvyv9Z7soW2CWH3slGcg++95LMd5E pHRoaFu1FqNuPSbPBjpcifb6B94z0yZuDMRH6mnlv9+ierHeglYkCnm07tPmMtHG rM664C1ScRqjryXmKscHAP3C1wAn8k/s7IoXPVEXaNiWn/RYdIW4kDoq6+kg0LQ9 YJ51X5F/9u79/DIvqbiUACLeWeeQX5idJSUQKx+bj552impIaAg= =2aFg -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm ARM64 defconfig updates for v6.6 This marks the MSM8996 global clock controller as buildin, to avoid boot issues. The SC8280XP GPU clock controller is enabled, to enable GPU support. A series of drivers needed to boot the IPQ5018 platform is enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled. * tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable IPQ5018 SoC base configs arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in arm64: defconfig: Enable Qualcomm SC8280XP GPUCC Link: https://lore.kernel.org/r/20230818023651.2484774-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
da6212d0ae |
Enable some options needed for Rockchip boards in the main defconfig.
-----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQjEQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgf8AB/4uOtpthHHRXdGEwT21/ADv81kPermebGoQ XBY/cq8CekFaZOin1XssgPsDEO2h85usp9YEDdZOP5esSTchkrJH+DKxhk1iOQyC Yre1PJ2BEV2qIV+QHJ5ehz5GFeLeLzmQZj7MC4FgVYncX8inFkPC6ucgSB3/ptdJ 0z4PyxV6EhInydWLLaoYcAoERmIF9X99I8bKgiTSonwikCMUHw4MF7+Y/5yQIC4Y 0srjN/LxhjLczWNcnMjHmkDmWDnAkNsXyzyGz93jvvTrDvhBSygXdPv0YyTswzd8 l0/0FFBElMbTwWyMjcK6MrPGBq14HVl5rtzgABvNK8pyVoihsvof =pPN4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkDV0ACgkQYKtH/8kJ UifFKxAApJVZ14INeYK4yeiRaTH5bdvJ5XW9YUDGGOsqBpB+/9RS28AD+x5FH2qa usHlpyUk2GhdUwQ4zFtK0st2hnOPAzlM4h96cD3/cJ8XEd3WP0B7imKvdKw+7qYa WCxSNsCefA1UFlCXwSB3ZlkwyZSHqVlpm/85f5rU8O0QkjLwvUD8k4y06bjb94MT fDaQ2MHAYW+di1MCL7TIIuxcFjuzlB8GFrpjcQpXC5CFsp87NHw7P2qjeqnoVQwW K2CelF5n9mVF0Ar0EgYVtSG2nsRK0FEI0RS6grhudcfXezee/A7Sj5+bKl/f4m2y HmC9ehoLPUAG4c5akjZvCPfrderrY6kHav2ScVddB5b2vfARfBezHURO4uP49W+X RQ2rIT1WozN6sgNTKkCOhSOFLGEepVGttjcPNpyKvHVOzZ4EO8r5WTyFVD+0PRH+ To/Xz7cSxeJEyaL2DFnqBV4EdmwfbQJRSPdudTttoR4MPPgym77zXPEWuLqP+lFi f3MYIjnDOzl01xOSQCkxh+wFQI62NH8oRMSzx0az/ps6Rs/H2aodMiNHhA0MYsEo CXe37OhdkU1+4f5KYNmnS8Es1V6grhY+136215mRMMDoBd2rJx6NlaG94GXB6ukM 0XersScNd/xv5XpSk8BNhN6HAPZ/BBkJBQeuZBnCWbjaYSystqc= =gfZf -----END PGP SIGNATURE----- Merge tag 'v6.6-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig Enable some options needed for Rockchip boards in the main defconfig. * tag 'v6.6-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: Enable drivers for the Odroid-M1 board arm64: defconfig: Enable GPIO_SYSCON arm64: defconfig: Enable Rockchip OTP memory driver arm64: defconfig: Enable PHY_ROCKCHIP_NANENG_COMBO_PHY Link: https://lore.kernel.org/r/5353918.Isy0gbHreE@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Pascal Paillet
|
8d6b492793 |
ARM: multi_v7_defconfig: Add SCMI regulator support
SCMI regulators are used in the ARMv7 STMicrolectronics stm32mp boards:
- for STM32MP13: stm32mp135f-dk
- for STM32MP15 boards with SCMI variant, introduced by commit
|
||
Saurabh Sengar
|
bb9b0e46b8 |
hv: hyperv.h: Replace one-element array with flexible-array member
One-element and zero-length arrays are deprecated. Replace one-element array in struct vmtransfer_page_packet_header with flexible-array member. This change fixes below warning: [ 2.593788] ================================================================================ [ 2.593908] UBSAN: array-index-out-of-bounds in drivers/net/hyperv/netvsc.c:1445:41 [ 2.593989] index 1 is out of range for type 'vmtransfer_page_range [1]' [ 2.594049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.5.0-rc4-next-20230803+ #1 [ 2.594114] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 04/20/2023 [ 2.594121] Call Trace: [ 2.594126] <IRQ> [ 2.594133] dump_stack_lvl+0x4c/0x70 [ 2.594154] dump_stack+0x14/0x20 [ 2.594162] __ubsan_handle_out_of_bounds+0xa6/0xf0 [ 2.594224] netvsc_poll+0xc01/0xc90 [hv_netvsc] [ 2.594258] __napi_poll+0x30/0x1e0 [ 2.594320] net_rx_action+0x194/0x2f0 [ 2.594333] __do_softirq+0xde/0x31e [ 2.594345] __irq_exit_rcu+0x6b/0x90 [ 2.594357] irq_exit_rcu+0x12/0x20 [ 2.594366] sysvec_hyperv_callback+0x84/0x90 [ 2.594376] </IRQ> [ 2.594379] <TASK> [ 2.594383] asm_sysvec_hyperv_callback+0x1f/0x30 [ 2.594394] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 2.594452] Code: 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 05 35 3f 00 fb f4 <c3> cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 [ 2.594459] RSP: 0018:ffffb841c00d3e88 EFLAGS: 00000256 [ 2.594469] RAX: ffff9d18c326f4a0 RBX: ffff9d18c031df40 RCX: 4000000000000000 [ 2.594475] RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000000268dc [ 2.594481] RBP: ffffb841c00d3e90 R08: 00000066a171109b R09: 00000000d33d2600 [ 2.594486] R10: 000000009a41bf00 R11: 0000000000000000 R12: 0000000000000001 [ 2.594491] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.594501] ? ct_kernel_exit.constprop.0+0x7d/0x90 [ 2.594513] ? default_idle+0xd/0x20 [ 2.594523] arch_cpu_idle+0xd/0x20 [ 2.594532] default_idle_call+0x30/0xe0 [ 2.594542] do_idle+0x200/0x240 [ 2.594553] ? complete+0x71/0x80 [ 2.594613] cpu_startup_entry+0x24/0x30 [ 2.594624] start_secondary+0x12d/0x160 [ 2.594634] secondary_startup_64_no_verify+0x17e/0x18b [ 2.594649] </TASK> [ 2.594656] ================================================================================ With this change the structure size is reduced by 8 bytes, below is the pahole output. struct vmtransfer_page_packet_header { struct vmpacket_descriptor d; /* 0 16 */ u16 xfer_pageset_id; /* 16 2 */ u8 sender_owns_set; /* 18 1 */ u8 reserved; /* 19 1 */ u32 range_cnt; /* 20 4 */ struct vmtransfer_page_range ranges[]; /* 24 0 */ /* size: 24, cachelines: 1, members: 6 */ /* last cacheline: 24 bytes */ }; The validation code in the netvsc driver is affected by changing the struct size, but the effects have been examined and have been determined to be appropriate. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/1692160478-18469-1-git-send-email-ssengar@linux.microsoft.com |
||
Maciej S. Szmigiero
|
78e04bbff8 |
Drivers: hv: vmbus: Don't dereference ACPI root object handle
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]
Fixes:
|
||
|
Arnd Bergmann
|
6681618814 |
Driver changes for omaps for v6.6
Driver changes for ti-sysc interconnect target module driver and for l3 interconnect error handler. The ti-sysc driver changes just enable using it for 64-bit systems like TI am62 that have wake-up capability for the wkup domain devices. The l3 error handling improves the code to show the error source if an unrecoverable timeout error occurs. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmTcS0cRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOtdA/+KwjCGqOpG3FDvgrLuLtL3ELKAat/LO1O eIWUvpLWX4b067AaYaEk6KRngTYGdj+KM99k88cydBY2JvFXXD3ivg5QVZoJ3aKm jiQfuouVcy6ea4ymOOfW81N9ugpTafBcSdtZomEEPF8HSCRkPD2FnzmK60BKLN/j 7s6UMGrwwwL3+2xqitsLUDlcD5dJ2a2tSf2NXy2PFrtQbx3DqR65HYwEGvncyFxR YvPKFKeT0yzt/wyZ7CGhuJPVqzAWeCWsjFnqcGscmjc7e4v6a14iR+vUo5qkaKo8 TvHWcFRsBlmvERcLGjSH5wnZnhqm46uc+9AVucpSVIOIDcljQX5D2/vuwZ2P7Zay jnaeCfrrGpFOXi5JaeFRM99ihvv1VrvQKOamsz5/XZjNCEri/f9TM4M28AmkB3FB vFZaJBbQfgYIahrE8pmXN2A6LB0QyubHkBDoYD6BKQRN/sz0t+WEEl7BS/qakO5K lzj5m/sXDPdb6ORzo5S/hFoOyOBA+EuheXuMRI96XkRK2aF/3jPW5t7IRh1dc9pa uv0NVeBc7Jf3vtRA60pO8ecc8YKZmO8hEK9cmhUyXDsgFfG7awXIEJyGc31NDWRz er26bjGjR0ELbZRlpJMpD1mYdkwfWFhnxQ5jFDIzcCMv5P2p5iJdZpryFZfCbt8t jscs2HgPX6Y= =//Xy -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkDGcACgkQYKtH/8kJ UifhxBAAzjHmDaL0JgVuAi0l9W9W8CYUnZre4S6qAu6349oEaRdpzChE6KWxCCvd xDginfnU93vXuxvsvTRauW9E63jLQ8vh6XyTpHV+yhbJj8x+NlkK6smp0cGCqClE cC0w/lg6HrJpkbxcK/PgSlAAFbyCmdsW5T/g+UC5Ip5Ts1pBn8xbdGBMAtzu7Clp oxqxC6RDDObeUJ5/kUI9ryIG0cH8CtSnrvz0eDLckCt1mhO6Ofw1URxzyTUc79jc rX69r9v1nPHU++5XuPXAPWc5nWXvwfKJAOXxyHIHO3kMUsEPum+Dd04vTRTD7SzS j1oiNVqEWocd7DLh8CTNx73hwJyxfjDLv9U2avg5lts6TG5eloAyf/CzCxEC29jo TSQn8W6yw4rueemzoNUypIKH5t1lkvpkbGZhIiEQf7iBCOx3b7pRJZAkWOniC/Xj Uw/w1aICfxPPXAfsxGpMC8hIZLhu8aS+He+4tUghWD1HFfxshnSYOcKpw2Cqp8P2 aTgEVTLUzaEw086S/fSKM6+fsT9Fl5vMjH5KxMmRP9k7jhu96SuHX8UV0zKVvYom U0IvQ2E8rtgoB2zQ3MeaNh0bmyA6PZL3QDpNg4ymWVkvITh6RXFpjXB8XIQh4unA ivXP4YSJnPFOM4cXlSYykx5nysOKvHkgy3OjfBMSMcqdCMP2avI= =QAxs -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers Driver changes for omaps for v6.6 Driver changes for ti-sysc interconnect target module driver and for l3 interconnect error handler. The ti-sysc driver changes just enable using it for 64-bit systems like TI am62 that have wake-up capability for the wkup domain devices. The l3 error handling improves the code to show the error source if an unrecoverable timeout error occurs. * tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix cast to enum warning bus: ti-sysc: Fix a build warning with W=1 for sysconfig bus: ti-sysc: Configure uart quirks for k3 SoC bus: ti-sysc: Build driver for TI K3 SoCs bus: ti-sysc: Fix build warning for 64-bit build bus: omap_l3_smx: identify timeout cause before rebooting Link: https://lore.kernel.org/r/pull-1692158857-597450@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9eb33ddedd |
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up, together with a couple stylistic cleanups and transition to mark exported symbols GPL only. An abstraction for the RPM subsystem is introduced, to make align the structure of the SMD and GLINK nodes thereof with the structure when a remoteproc is involved. This is done to facilitate associating additional entities with the RPM subsystem. The qmp_send() API is modified to not expose hardware requirements onto the client drivers, and then further extended to allow command formatting directly in the API, to facilitate this typical use case. In the Qualcomm Command DB driver, NUL characters previously included in identifiers are dropped from the debugfs, to facilitate scripting. The thresholds of the BWMON driver are simplified to avoid hard coded starting values. The OCMEM driver is updated with some cleanups and fixes, and addition of MSM8226 support. PMIC_GLINK gains support for retimer switches, safe mode is selected when the cable is disconnected from altmode and the same is enabled for SM8550. An off-by-one string length check is corrected in the QMI encoder decoder library. The RPMh tracepoints are extended to include the state of the request, to provide needed context in the traced events. The series from Ulf creating a genpd framework is integrated, to facilitate the other changes to the cpr, rpmpd and rpmhpd driver. SDX75 support is added to the rpmhpd driver, and the rpmpd driver is extended with the same sync_state logic found in the rpmhpd driver. The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019 platform is dropped. Clock handling in the GSBI driver is cleaned up with the use of devm_clk_get_enabled(). The list of VMIDs defined for the SCM assign memory interface is extended. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTe2FIVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FPaYP/0j7dGziE/KQaTccT/arpgiU6wH/ fzu7j76r/JY90Jw61vxWsTfuR94Irr8/NzzvLXMO1cKfzJXxsPKqYuuWBe/hFu3u Bva/4XtHspitKQCvBYOhX2dxj3BtYzsrVNmh3sOeEKhXcUaVuCQXkpeE3fqNBwYB li70t/dHVPPr2mDY30QhD9nn8XgWG8DlSzyuvIp+zI8kpNX04Cdqg2BEidB8GO4f ZgcAtnCIssIojBhRwVO7ei8RnGu6i2+69Vwtrx8nNT85Wcyx7NLxjZfp7+5PrZnv Xyu/JO4yYZooEVMAOtXJcxbZRs3FmGovg5RnR5w1CIz87Kmw5Wq0g9wZHMuLxC/G u4SzwjCqwEhAVWSzsVmicLOs4y2Ndwju3ojX3kLPh02yw5xo6BpxXdZIptTvVIQn DicTCaHU3QxxqkH7elLxNxyRYvmJbDbwKJ/hZjSRWSsJUhI4fvWoyrL6wNZ9+rTW 1zCkfEH3XikjMGHweeZc+VYu03XyohIYYn+jxpdwOjajF+3BsQSiqN1tKwj71ci/ Nk6sn+TRsq/jY6x33ULfbQCjeQ3BOGEngHTQ8N1i5D1vM2BUY/jrH6Dt1tIUdRjh avR2KvZzzPs7Cp/094aQDX42GcQKeVOit6pF+NhE0c2uVqQCB5c6ynZwcvt0YNS9 Ty0mqIn99wgbHxVw =SEyF -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkC1sACgkQYKtH/8kJ UifjiBAAnIlToZQERPaKlX1zQTYVfrMiyNQ8fyUGLnAj0bNFWFzYgS6p5NXerxdT /sk2tipNqJyym3h797r2aAjAXpyTnKYIwZqGjvWGBbhaViv6ovuDYkJUBk0ffybB a0Ve4M1JnVZATiwqeoZwi6/1/M2JC3+20O+LRL4lWzZAm61NsU4ULAcX4sHeUYYA 02wMfzkME0Ye7sthv9GBtbm8Szr+GEuDvUTXx0DI74QrZuj6+wl3rjZ2uRrT97ZX DuPtmhl2ZVjCigCsfxdj2J8eq8dpkROAzAeGa9d/NctkCV+dHhSEWZ0LraauLCJk iXA2ZXOACHWF4tn8TC/eDx0Pv6CS+gRVjyYYLNkWreDSPfk7Vqaua3iNc7AfhIJV hfJV1QhDmRt+pXi8pJQSSbTtjfzaURzD78N7JLMRZdZPozRwD/kl1+m/r5OMT4C+ NI4cLB544Zb34WEUgjZYNUjk18vkZmEQnvWwAGIzOQgHq5m/m6o2QQOnTgiTwaXh Neh8k+KKt85IwkjFarwmKsLhajHezHIEqgHrGdfiIFr9+hAMPBIgUP3/eo6PFDNk XP+IVMeucEtn7Og6d6rQmJ0kPvL32ucdXWdqOwLijoDablFwX1Giif77LjN5LRYj IxReK7C8CwZKqLf2k0pv8dLE4g8On6OThveedXbLNuMx+EgcB2w= =RpyB -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.6 Compatible and clock handling in the Qualcomm SCM driver is cleaned up, together with a couple stylistic cleanups and transition to mark exported symbols GPL only. An abstraction for the RPM subsystem is introduced, to make align the structure of the SMD and GLINK nodes thereof with the structure when a remoteproc is involved. This is done to facilitate associating additional entities with the RPM subsystem. The qmp_send() API is modified to not expose hardware requirements onto the client drivers, and then further extended to allow command formatting directly in the API, to facilitate this typical use case. In the Qualcomm Command DB driver, NUL characters previously included in identifiers are dropped from the debugfs, to facilitate scripting. The thresholds of the BWMON driver are simplified to avoid hard coded starting values. The OCMEM driver is updated with some cleanups and fixes, and addition of MSM8226 support. PMIC_GLINK gains support for retimer switches, safe mode is selected when the cable is disconnected from altmode and the same is enabled for SM8550. An off-by-one string length check is corrected in the QMI encoder decoder library. The RPMh tracepoints are extended to include the state of the request, to provide needed context in the traced events. The series from Ulf creating a genpd framework is integrated, to facilitate the other changes to the cpr, rpmpd and rpmhpd driver. SDX75 support is added to the rpmhpd driver, and the rpmpd driver is extended with the same sync_state logic found in the rpmhpd driver. The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019 platform is dropped. Clock handling in the GSBI driver is cleaned up with the use of devm_clk_get_enabled(). The list of VMIDs defined for the SCM assign memory interface is extended. * tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits) soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller dt-bindings: firmware: qcom: scm: Updating VMID list dt-bindings: qcom: Update RPMHPD entries for some SoCs soc: qcom: qmi_encdec: Restrict string length in decode soc: qcom: smem: Fix incompatible types in comparison soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe() soc: qcom: socinfo: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID soc: qcom: socinfo: drop the IPQ5019 SoC ID soc: qcom: socinfo: add SM4450 ID dt-bindings: arm: qcom,ids: add SoC ID for SM4450 soc: qcom: pmic_glink: enable altmode for SM8550 soc: qcom: pmic_glink_altmode: add retimer-switch support soc: qcom: pmic_glink_altmode: handle safe mode when disconnect soc: qcom: rpmhpd: Add SDX75 power domains dt-bindings: power: qcom,rpmpd: Add compatible for sdx75 genpd: Makefile: build imx ... Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d4692f6c27 |
PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable). This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves the powerdomain drivers into a new genpd subsystem. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQxUQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgaRgB/41U/lA1H0hIfXBKKBXFEDYkQMC1qEEtDnU pi8L6Bp44Gb5JbrD4wrNMc9AUJokxC1zGEVmwpySXNOy3ma0DQRPPKNQMNo8gcae R8bZPbpdvkBBY6HMeFI0/c0+B3qU0G/RBfaMMe0edPlaeLFz8j8TUotUJo4rGh20 RoA2Dir7/YWN1S0EIOwJVRzYnr9vG7rGJsceabyYH/liDFs7neEgCDi9LWwNIBbL 5ANWM7UytIOsZOrPOegLHLgsPyYvccHgKCgctCPt6k04/9ZBTwp6pFyBtUtd91GW oAL7SgF5tbkDYysj3nwZGOzCUIUVlxMTs6szTge4WuzGVOhXOZrn =5C7a -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkCj0ACgkQYKtH/8kJ UifB/RAAsf5wuB1Jp+cbaVVTLgMUzMCOGJCJwjSk9FVfR4qJlnIdGwKUJUGaVkP1 SUvPAVd/abJ+sySLBbLzDb22zmOK2NQ8lfSr8I4wDPTrcfxtNO3OY2eWyx1Zcqv9 ojHQOW8ri9/YhUlyFJ3ZwWNiF42IwiB+DRgtLGDla/QeUV7YXaQK0zWsrapbNHEz W3qlOn7h57EXnZe7MIPc/JsiivRMR3SmMLWOMKi0u+d6K3SDm/N+TD+Pko3SW0vO SaRMmE6tfHrU1ClpQIZmNFORvWIZondEiskhCOb+hvQSBYGbWrA60J5obLZ8Rc1K xtpMrTDe7JBlesi92leM3GN8T1a+Y12nlh+6nJDli8OFdVCBk1zzNbyS2Uhts90S RPjh5UR7RtDNfsx2ROiddUV6DzDA8Wm507ioSAuqbEkex5x8eg6AkEhRQOB7L5WP OGYh9acjPOweSzNbNoepcbtOmnGRwJSh5WFzo0dSqKeHB5ayuKMR2Wjm+5qOMa8A ww1FBkZaSWYX0y2/kGjTIUfAJsOsa1tDEViUnOw/GafXrJY5tGghQCtqmzpps39A BmjhHApylaroPR1hT5HdEumrQe6YD5ROS/+JltKWyV8Mv1dnbbid58RKG6zmuwNz 1N3Dhpe53N2ZuU500d+xA9WyqUb1q6gZI443PcJOFWc129Y+W7A= =Nt2J -----END PGP SIGNATURE----- Merge tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers PD_VO powerdomain for rv1126 and disabling of the automatic switch between sdmmc and jtag for rk3588 (makes sdmmc unreliable). This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves the powerdomain drivers into a new genpd subsystem. * tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Huisong Li
|
7d6612834d |
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
This patch fixes some sparse warnings about incorrect type.
The address about PCC communication space should use '__iomem' tag.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.dH5Muhva-lkp@intel.com/
Fixes:
|
||
Yinbo Zhu
|
67694c076b |
soc: loongson2_pm: add power management support
The Loongson-2's power management controller was ACPI, supports ACPI S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods (USB, GMAC, PWRBTN, etc.). This driver was to add power management controller support that base on dts for Loongson-2 series SoCs. Co-developed-by: Liu Yun <liuyun@loongson.cn> Signed-off-by: Liu Yun <liuyun@loongson.cn> Co-developed-by: Liu Peibao <liupeibao@loongson.cn> Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Cc: soc@kernel.org Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230803063703.5659-3-zhuyinbo@loongson.cn Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Yinbo Zhu
|
6054a676e9 |
soc: dt-bindings: add loongson-2 pm
Add the Loongson-2 SoC Power Management Controller binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230803063703.5659-2-zhuyinbo@loongson.cn Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Tianyu Lan
|
4754ec7f20 |
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
Add Hyperv-specific handling for faults caused by VMMCALL instructions. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-9-ltykernel@gmail.com |
||
|
Tianyu Lan
|
44676bb9d5 |
x86/hyperv: Add smp support for SEV-SNP guest
In the AMD SEV-SNP guest, AP needs to be started up via sev es save area and Hyper-V requires to call HVCALL_START_VP hypercall to pass the gpa of sev es save area with AP's vp index and VTL(Virtual trust level) parameters. Override wakeup_secondary_cpu_64 callback with hv_snp_boot_ap. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-8-ltykernel@gmail.com |
||
|
Tianyu Lan
|
45f46b1ac9 |
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
Hyper-V tsc page is shared with hypervisor and mark the page unencrypted in sev-snp enlightened guest when it's used. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-7-ltykernel@gmail.com |
||
|
Tianyu Lan
|
48b1f68372 |
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
In sev-snp enlightened guest, Hyper-V hypercall needs to use vmmcall to trigger vmexit and notify hypervisor to handle hypercall request. Signed-off-by: Tianyu Lan <tiala@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-6-ltykernel@gmail.com |
||
|
Tianyu Lan
|
193061ea0a |
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
Hypervisor needs to access input arg, VMBus synic event and message pages. Mark these pages unencrypted in the SEV-SNP guest and free them only if they have been marked encrypted successfully. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com |
||
|
Tianyu Lan
|
b13103559d |
x86/hyperv: Mark Hyper-V vp assist page unencrypted in SEV-SNP enlightened guest
hv vp assist page needs to be shared between SEV-SNP guest and Hyper-V. So mark the page unencrypted in the SEV-SNP guest. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-4-ltykernel@gmail.com |
||
|
Tianyu Lan
|
8387ce06d7 |
x86/hyperv: Set Virtual Trust Level in VMBus init message
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust Levels (VTL). During boot, get the VTL at which we're running using the GET_VP_REGISTERs hypercall, and save the value for future use. Then during VMBus initialization, set the VTL with the saved value as required in the VMBus init message. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com |
||
|
Tianyu Lan
|
d6e2d65244 |
x86/hyperv: Add sev-snp enlightened guest static key
Introduce static key isolation_type_en_snp for enlightened sev-snp guest check. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com |
||
Matt Roper
|
e388ae97e2 |
drm/i915/display: Eliminate IS_METEORLAKE checks
Most of the IS_METEORLAKE checks in the display code shouldn't actually be tied to MTL as a platform, but rather to the Xe_LPD+ display IP (which is used in MTL, but may show up again in future platforms). In cases where we're trying to match that specific IP, use a version check against IP_VER(14, 0). For cases where we're just handling new behavior introduced by this IP (but which may also be inherited by future IP as well), use a ver >= 14 check. The one exception here is the stolen memory workaround Wa_13010847436 (which is mislabelled as "Wa_22018444074" in the code). That's truly a MTL-specific issue rather than being tied to any of the IP blocks, so leaving the condition as IS_METEORLAKE is correct there. v2: - cdclk check should be >=, not >. (Gustavo) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-19-matthew.d.roper@intel.com |
||
|
Matt Roper
|
213454b3af |
drm/i915: Eliminate IS_MTL_DISPLAY_STEP
Stepping-specific display behavior shouldn't be tied to MTL as a platform, but rather specifically to the Xe_LPD+ IP. Future non-MTL platforms may re-use this IP and will need to follow the exact same logic and apply the same workarounds. IS_MTL_DISPLAY_STEP() is dropped in favor of a new macro IS_DISPLAY_IP_STEP() that only checks the display IP version. v2: - Rename macro to IS_DISPLAY_IP_STEP for consistency with the corresponding GT macro and handle steppings the same way. v3: - Drop the automatic "STEP_" pasting. v4: - Implement IS_DISPLAY_IP_STEP on top of IS_DISPLAY_IP_RANGE / IS_DISPLAY_STEP building blocks and make the parameters from/until instead of begin/fixed. (Jani) - Fix usage details in comment. v5: - Tweak macro comment. (Gustavo) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-17-matthew.d.roper@intel.com |
||
|
Matt Roper
|
14128d6409 |
drm/i915: Replace several IS_METEORLAKE with proper IP version checks
Many of the IS_METEORLAKE conditions throughout the driver are supposed to be checks for Xe_LPG and/or Xe_LPM+ IP, not for the MTL platform specifically. Update those checks to ensure that the code will still operate properly if/when these IP versions show up on future platforms. v2: - Update two more conditions (one for pg_enable, one for MTL HuC compatibility). v3: - Don't change GuC/HuC compatibility check, which sounds like it truly is specific to the MTL platform. (Gustavo) - Drop a non-lineage workaround number for the OA timestamp frequency workaround. (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-20-matthew.d.roper@intel.com |
||
|
Matt Roper
|
2e3c369f23 |
drm/i915/mtl: Eliminate subplatforms
Now that we properly match the Xe_LPG IP versions associated with various workarounds, there's no longer any need to define separate MTL subplatform in the driver. Nothing in the code is conditional on MTL-M or MTL-P base platforms. Furthermore, I'm not sure the "M" and "P" designations are even an accurate representation of which specific platforms would have which IP versions; those were mostly just placeholders from a long time ago. The reality is that the IP version present on a platform gets read from a fuse register at driver init; we shouldn't be trying to guess which IP is present based on PCI ID anymore. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-18-matthew.d.roper@intel.com |
||
|
Matt Roper
|
81af8abe65 |
drm/i915: Eliminate IS_MTL_MEDIA_STEP
Stepping-specific media behavior shouldn't be tied to MTL as a platform, but rather specifically to the Xe_LPM+ IP. Future non-MTL platforms may re-use this IP and will need to follow the exact same logic and apply the same workarounds. IS_MTL_MEDIA_STEP() is dropped in favor of IS_MEDIA_GT_IP_STEP, which checks the media IP version associated with a specific IP and also ensures that we're operating on the media GT, not the primary GT. v2: - Switch to the IS_GT_IP_STEP macro. v3: - Switch back to long-form IS_MEDIA_GT_IP_STEP. (Jani) v4: - Build IS_MEDIA_GT_IP_STEP on top of IS_MEDIA_GT_IP_RANGE and IS_MEDIA_STEP building blocks and name the parameters from/until rather than begin/fixed.. (Jani) v5: - Tweak macro comment wording. (Gustavo) - Add a check to catch NULL gt in IS_MEDIA_GT_IP_RANGE; this allows it to be used safely on i915->media_gt, which may be NULL on some platforms. (Gustavo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-16-matthew.d.roper@intel.com |
||
|
Matt Roper
|
5a213086a0 |
drm/i915: Eliminate IS_MTL_GRAPHICS_STEP
Several workarounds are guarded by IS_MTL_GRAPHICS_STEP. However none of these workarounds are actually tied to MTL as a platform; they only relate to the Xe_LPG graphics IP, regardless of what platform it appears in. At the moment MTL is the only platform that uses Xe_LPG with IP versions 12.70 and 12.71, but we can't count on this being true in the future. Switch these to use a new IS_GFX_GT_IP_STEP() macro instead that is purely based on IP version. IS_GFX_GT_IP_STEP() is also GT-based rather than device-based, which will help prevent mistakes where we accidentally try to apply Xe_LPG graphics workarounds to the Xe_LPM+ media GT and vice-versa. v2: - Switch to a more generic and shorter IS_GT_IP_STEP macro that can be used for both graphics and media IP (and any other kind of GTs that show up in the future). v3: - Switch back to long-form IS_GFX_GT_IP_STEP macro. (Jani) - Move macro to intel_gt.h. (Andi) v4: - Build IS_GFX_GT_IP_STEP on top of IS_GFX_GT_IP_RANGE and IS_GRAPHICS_STEP building blocks and name the parameters from/until rather than begin/fixed. (Jani) - Fix usage examples in comment. v5: - Tweak comment on macro. (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-15-matthew.d.roper@intel.com |
||
|
Matt Roper
|
f7696ded7c |
drm/i915/xelpg: Call Xe_LPG workaround functions based on IP version
Although some of our Xe_LPG workarounds were already being applied based on IP version correctly, others were matching on MTL as a base platform, which is incorrect. Although MTL is the only platform right now that uses Xe_LPG IP, this may not always be the case. If a future platform re-uses this graphics IP, the same workarounds should be applied, even if it isn't a "MTL" platform. We were also incorrectly applying Xe_LPG workarounds/tuning to the Xe_LPM+ media IP in one or two places; we should make sure that we don't try to apply graphics workarounds to the media GT and vice versa where they don't belong. A new helper macro IS_GT_IP_RANGE() is added to help ensure this is handled properly -- it checks that the GT matches the IP type being tested as well as the IP version falling in the proper range. Note that many of the stepping-based workarounds are still incorrectly checking for a MTL base platform; that will be remedied in a later patch. v2: - Rework macro into a slightly more generic IS_GT_IP_RANGE() that can be used for either GFX or MEDIA checks. v3: - Switch back to separate macros for gfx and media. (Jani) - Move macro to intel_gt.h. (Andi) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-14-matthew.d.roper@intel.com |
||
|
Matt Roper
|
ea2f15565d |
drm/i915/xelpmp: Don't assume workarounds extend to future platforms
The currently implemented Xe_LPM+ workarounds are specific to media version 13.00. When new IP versions show up in the future, they'll need their own workaround lists. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-13-matthew.d.roper@intel.com |
||
|
Matt Roper
|
28c46feec7 |
drm/i915: Consolidate condition for Wa_22011802037
The workaround bounds for Wa_22011802037 are somewhat complex and are replicated in several places throughout the code. Pull the condition out to a helper function to prevent mistakes if this condition needs to change again in the future. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-12-matthew.d.roper@intel.com |
||
Mark Brown
|
1c351c236a |
spi: switch to use modern name (part4)
Merge series from Yang Yingliang <yangyingliang@huawei.com>: I'm trying to rename the legacy name to modern name used in SPI drivers, this is part4 patchset. After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy named function devm_spi_alloc_master/spi_alloc_master() can be replaced. And also change other legacy name master/slave to modern name host/target or controller. Each patch compile test passed. |
||
|
Mark Brown
|
31eedc155c |
regulator: aw37503: add regulator driver for Awinic
Merge series from like@awinic.com: Add regulator driver for the device Awinic AW37503 which is single inductor - dual output power supply device. AW37503 device is designed to support general positive/negative driven applications like TFT display panels. |
||
Alexei Starovoitov
|
d565183800 |
Merge branch 'bpf-add-multi-uprobe-link'
Jiri Olsa says:
====================
bpf: Add multi uprobe link
hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new uprobe_multi link.
The current uprobe is attached through the perf event and attaching many
uprobes takes a lot of time because of that.
The main reason is that we need to install perf event for each probed function
and profile shows perf event installation (perf_install_in_context) as culprit.
The new uprobe_multi link just creates raw uprobes and attaches the bpf
program to them without perf event being involved.
In addition to being faster we also save file descriptors. For the current
uprobe attach we use extra perf event fd for each probed function. The new
link just need one fd that covers all the functions we are attaching to.
v7 changes:
- fixed task release on error path and re-org the error
path to be more straightforward [Yonghong]
- re-organized uprobe_prog_run locking to follow general pattern
and removed might_fault check as it's not needed in uprobe/task
context [Yonghong]
There's support for bpftrace [2] and tetragon [1].
Also available at:
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
uprobe_multi
thanks,
jirka
[1] https://github.com/cilium/tetragon/pull/936
[2] https://github.com/iovisor/bpftrace/compare/master...olsajiri:bpftrace:uprobe_multi
[3] https://lore.kernel.org/bpf/20230628115329.248450-1-laoar.shao@gmail.com/
---
====================
Link: https://lore.kernel.org/r/20230809083440.3209381-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Jiri Olsa
|
8909a9392b |
selftests/bpf: Add extra link to uprobe_multi tests
Attaching extra program to same functions system wide for api and link tests. This way we can test the pid filter works properly when there's extra system wide consumer on the same uprobe that will trigger the original uprobe handler. We expect to have the same counts as before. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
d571efae0f |
selftests/bpf: Add uprobe_multi pid filter tests
Running api and link tests also with pid filter and checking the probe gets executed only for specific pid. Spawning extra process to trigger attached uprobes and checking we get correct counts from executed programs. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
e7cf9a48f8 |
selftests/bpf: Add uprobe_multi cookie test
Adding test for cookies setup/retrieval in uprobe_link uprobes and making sure bpf_get_attach_cookie works properly. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |