In current driver, counter0 will be enabled after ddr_perf_pmu_enable()
is called even though none of the 4 counters are used. This will cause
counter0 continue to count until ddr_perf_pmu_disabled() is called. If
pmu is not disabled all the time, the pmu interrupt will be asserted
from time to time due to counter0 will overflow and irq handler will
clear it. It's not an expected behavior. This patch will not enable
counter0 if none of 4 counters are used.
Fixes: 9a66d36cc7 ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.
Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
The PCIe PMUs locate on different NUMA node but currently we don't
consider it and likely stack all the sessions on the same CPU:
[root@localhost tmp]# cat /sys/devices/hisi_pcie*/cpumask
0
0
0
0
0
0
This can be optimize a bit to use a local CPU for the PMU.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230815131010.2147-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Powzan keyboards KB750 and KB770 identify as
"Hailuck Co.,Ltd USB Keyboard". Adding "Hailuck" to the list
of non-apple keyboards fixes function keys for these models.
Signed-off-by: Nils Tonnaett <ntonnatt@ccrma.stanford.edu>
Reviewed-by: Rahul Rameshbabu <sergeantsagara@protonmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The following circular locking dependency was reported when running
cpus online/offline test on an arm64 system.
[ 84.195923] Chain exists of:
dmc620_pmu_irqs_lock --> cpu_hotplug_lock --> cpuhp_state-down
[ 84.207305] Possible unsafe locking scenario:
[ 84.213212] CPU0 CPU1
[ 84.217729] ---- ----
[ 84.222247] lock(cpuhp_state-down);
[ 84.225899] lock(cpu_hotplug_lock);
[ 84.232068] lock(cpuhp_state-down);
[ 84.238237] lock(dmc620_pmu_irqs_lock);
[ 84.242236]
*** DEADLOCK ***
The following locking order happens when dmc620_pmu_get_irq() calls
cpuhp_state_add_instance_nocalls().
lock(dmc620_pmu_irqs_lock) --> lock(cpu_hotplug_lock)
On the other hand, the calling sequence
cpuhp_thread_fun()
=> cpuhp_invoke_callback()
=> dmc620_pmu_cpu_teardown()
leads to the locking sequence
lock(cpuhp_state-down) => lock(dmc620_pmu_irqs_lock)
Here dmc620_pmu_irqs_lock protects both the dmc620_pmu_irqs and the
pmus_node lists in various dmc620_pmu instances. dmc620_pmu_get_irq()
requires protected access to dmc620_pmu_irqs whereas
dmc620_pmu_cpu_teardown() needs protection to the pmus_node lists.
Break this circular locking dependency by using two separate locks to
protect dmc620_pmu_irqs list and the pmus_node lists respectively.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230812235549.494174-1-longman@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
All ipl types have 'secure','has_secure' and type parameters. Move
these to a common ipl parameter group so that they don't need to be
present in each ipl parameter group.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
OS installers are relying on /sys/firmware/ipl/has_secure to be
present on machines supporting secure boot. This file is present
for all IPL types, but not the unknown type, which prevents a secure
installation when an LPAR is booted in HMC via FTP(s), because
this is an unknown IPL type in linux. While at it, also add the secure
file.
Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit fb08a1908c ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().
For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.
This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().
Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.
Fixes: fb08a1908c ("dax: simplify the dax_device <-> gendisk association")
Cc: <stable@vger.kernel.org> # 5.17+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry do the same with pfn_to_virt() reflecting the
current layout in asm-generic/page.h.
Doing this reveals a number of offenders in the arch code and
the S390-specific drivers, so just bite the bullet and fix up
all of those as well.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make multi-line comment style consistent across the source.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Real Memory Copy and (absolute) Lowcore areas are
not accounted when virtual memory layout is set up.
Fixes: 4df29d2b90 ("s390/smp: rework absolute lowcore access")
Fixes: 2f0e8aae26 ("s390/mm: rework memcpy_real() to avoid DAT-off mode")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make Real Memory Copy area size and mask explicit.
This does not bring any functional change and only
needed for clarity.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The separate vmalloc area size check against _REGION2_SIZE
is needed in case user provided insanely large value using
vmalloc= kernel command line parameter. That could lead to
overflow and selecting 3 page table levels instead of 4.
Use size_add() for the overflow check and get rid of the
extra vmalloc area check.
With the current values of CONFIG_MAX_PHYSMEM_BITS and
PAGES_PER_SECTION the sum of maximal possible size of
identity mapping and vmemmap area (derived from these
macros) plus modules area size MODULES_LEN can not
overflow. Thus, that sum is used as first addend while
vmalloc area size is second addend for size_add().
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes: 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Switch to use modern name function devm_spi_alloc_host().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230816094013.1275068-15-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop some of the JSON/events for power10 platform due to counter
data mismatch.
Fixes: 32daa5d789 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-2-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
riscv now supports mmaping hardware counters to userspace so adapt the
test to run on this architecture.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rémi Denis-Courmont <remi@remlab.net>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230802080328.1213905-11-alexghiti@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
riscv now supports mmaping hardware counters so add what's needed to
take advantage of that in libperf.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rémi Denis-Courmont <remi@remlab.net>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230802080328.1213905-10-alexghiti@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
util/perf_regs.h includes another perf_regs.h:
#include <perf_regs.h>
Here it includes architecture specific header, for example, if we build
arm64 target, the header tools/perf/arch/arm64/include/perf_regs.h is
included.
We use this implicit way to include architecture specific header, which
is not directive; furthermore, util/perf_regs.c is coupled with the
architecture specific definitions.
This patch moves out arch specific header from util/perf_regs.h for
generalizing the 'util' folder, as a result, the source files in 'arch'
folder explicitly include architecture's perf_regs.h.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The macros PERF_REGS_MAX and PERF_REGS_MASK are architecture specific,
let's remove them from the common file util/perf_regs.c.
As a side effect, the weak functions arch__intr_reg_mask() and
arch__user_reg_mask() just return zeros, every arch defines its own
functions in the 'arch' folder for returning right values.
Note, we don't need to return intr/user register masks dynamically, this
is because these two functions are invoked during recording phase but
not decoding phase, they are always invoked on the native environment,
thus we don't need to parse them dynamically.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The macros PERF_REG_{IP|SP} have been replaced by using functions
perf_arch_reg_{ip|sp}(), remove them!
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use perf_arch_reg_ip() and perf_arch_reg_sp() to substitute macros
for obtaining the register numbers of SP and IP. This modification
enables cross analysis in the unwinding, therefore, the unwinding is
not restricted to the predefined values by the macros.
Consequently, the macros LIBUNWIND__ARCH_REG_{IP|SP} are removed since
they are no longer used.
Committer notes:
Add missing "util/env.h" header to make sure we have the definition for
perf_env__arch(), that when built with NO_LIBUNWIND=1 isn't available,
i.e. it was being included by sheer luck.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code uses macros PERF_REG_IP and PERF_REG_SP for parsing
registers and we build perf with these macros statically, which means it
only can correctly analyze CPU registers for the native architecture and
fails to support cross analysis (e.g. we build perf on x86 and cannot
analyze Arm64's registers).
We need to generalize util/perf_regs.c for support multi architectures,
as a first step, this commit introduces new functions perf_arch_reg_ip()
and perf_arch_reg_sp(), these two functions dynamically return IP and SP
register index respectively according to the parameter "arch".
Every architecture has its own functions (like __perf_reg_ip_arm64 and
__perf_reg_sp_arm64), these architecture specific functions are defined
in each arch source file under folder util/perf-regs-arch; at the end
all of them are built into the tool for cross analysis.
Committer notes:
Make DWARF_MINIMAL_REGS() an inline function, so that we can use the
__maybe_unused attribute for the 'arch' parameter, as this will avoid a
build failure when that variable is unused in the callers. That happens
when building on unsupported architectures, the ones without
HAVE_PERF_REGS_SUPPORT defined.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Every architecture has a specific register parsing function for
returning register name based on register index, to support cross
analysis (e.g. we use perf x86 binary to parse Arm64's perf data), we
build all these register parsing functions into the tool, this is why
we place all related functions into util/perf_regs.c.
Unfortunately, since util/perf_regs.c needs to include every arch's
perf_regs.h, this easily introduces duplicated definitions coming from
multiple headers, finally it's fragile for building and difficult for
maintenance.
We cannot simply move these register parsing functions into the
corresponding 'arch' folder, the folder is only conditionally built
based on the target architecture.
Therefore, this commit creates a new folder util/perf-regs-arch/ and
uses a dedicated source file to keep every architecture's register
parsing function to avoid definition conflicts.
This is only a refactoring, no functionality change is expected.
Committer notes:
Had to add util/perf-regs-arch/*.c to tools/perf/util/python-ext-sources
to keep 'perf test python' passing.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230606014559.21783-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the format of unordered lists so the can wrap properly.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230718085242.3090797-1-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After we remove a GPIO chip that still has some requested descriptors,
gpiod_free_commit() will fail and we will never put the references to the
GPIO device and the owning module in gpiod_free().
Rework this function to:
- not warn on desc == NULL as this is a use-case on which most free
functions silently return
- put the references to desc->gdev and desc->gdev->owner unconditionally
so that the release callback actually gets called when the remaining
references are dropped by external GPIO users
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
It seems that sysfs interface implicitly relied on the gpiod_free() to
unexport the line. This is logically incorrect as core gpiolib should
not deal with sysfs so instead of restoring it, let's call
gpiod_unexport() from sysfs code.
Fixes: b0ce9ce408 ("gpiolib: Do not unexport GPIO on freeing")
Reported-by: Marek Behún <kabel@kernel.org>
Closes: https://lore.kernel.org/r/20230808102828.4a9eac09@dellmb
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Behún <kabel@kernel.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kui-Feng Lee says:
====================
Remove expired routes with a separated list of routes.
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree
can be expensive if the number of routes in a table is big, even if most of
them are permanent. Checking routes in a separated list of routes having
expiration will avoid this potential issue.
Background
==========
The size of a Linux IPv6 routing table can become a big problem if not
managed appropriately. Now, Linux has a garbage collector to remove
expired routes periodically. However, this may lead to a situation in
which the routing path is blocked for a long period due to an
excessive number of routes.
For example, years ago, there is a commit c7bb4b8903 ("ipv6: tcp:
drop silly ICMPv6 packet too big messages"). The root cause is that
malicious ICMPv6 packets were sent back for every small packet sent to
them. These packets add routes with an expiration time that prompts
the GC to periodically check all routes in the tables, including
permanent ones.
Why Route Expires
=================
Users can add IPv6 routes with an expiration time manually. However,
the Neighbor Discovery protocol may also generate routes that can
expire. For example, Router Advertisement (RA) messages may create a
default route with an expiration time. [RFC 4861] For IPv4, it is not
possible to set an expiration time for a route, and there is no RA, so
there is no need to worry about such issues.
Create Routes with Expires
==========================
You can create routes with expires with the command.
For example,
ip -6 route add 2001:b000:591::3 via fe80::5054:ff:fe12:3457 \
dev enp0s3 expires 30
The route that has been generated will be deleted automatically in 30
seconds.
GC of FIB6
==========
The function called fib6_run_gc() is responsible for performing
garbage collection (GC) for the Linux IPv6 stack. It checks for the
expiration of every route by traversing the trees of routing
tables. The time taken to traverse a routing table increases with its
size. Holding the routing table lock during traversal is particularly
undesirable. Therefore, it is preferable to keep the lock for the
shortest possible duration.
Solution
========
The cause of the issue is keeping the routing table locked during the
traversal of large trees. To solve this problem, we can create a separate
list of routes that have expiration. This will prevent GC from checking
permanent routes.
Result
======
We conducted a test to measure the execution times of fib6_gc_timer_cb()
and observed that it enhances the GC of FIB6. During the test, we added
permanent routes with the following numbers: 1000, 3000, 6000, and
9000. Additionally, we added a route with an expiration time.
Here are the average execution times for the kernel without the patch.
- 120020 ns with 1000 permanent routes
- 308920 ns with 3000 ...
- 581470 ns with 6000 ...
- 855310 ns with 9000 ...
The kernel with the patch consistently takes around 14000 ns to execute,
regardless of the number of permanent routes that are installed.
Major changes from v7:
- Fix warings raised by the patchwork.
Major changes from v6:
- Remove unnecessary check of tb6 in fib6_clean_expires_locked().
- Use ib6_clean_expires_locked() instead in fib6_purge_rt().
Major changes from v5:
- Change the order of adding new routes to the GC list and starting
GC timer.
- Remove time measurements from the test case.
- Stop forcing GC flush.
Major changes from v4:
- Detect existence of 'strace' in the test case.
Major changes from v3:
- Fix the type of arg according to feedback.
- Add 1k temporary routes and 5K permanent routes in the test case.
Measure time spending on GC with strace.
Major changes from v2:
- Remove unnecessary and incorrect sysctl restoring in the test case.
Major changes from v1:
- Moved gc_link to avoid creating a hole in fib6_info.
- Moved fib6_set_expires*() and fib6_clean_expires*() to the header
file and inlined. And removed duplicated lines.
- Added a test case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 1000 IPv6 routes with expiration time (w/ and w/o additional 5000
permanet routes in the background.) Wait for a few seconds to make sure
they are removed correctly.
The expected output of the test looks like the following example.
> Fib6 garbage collection test
> TEST: ipv6 route garbage collection [ OK ]
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree
can be expensive if the number of routes in a table is big, even if most of
them are permanent. Checking routes in a separated list of routes having
expiration will avoid this potential issue.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some I219 devices, ethernet cable plugging detection only works once
from PCI D3 state. Subsequent cable plugging does set PME bit correctly,
but device still doesn't get woken up.
Since I219 connects to the root complex directly, it relies on platform
firmware (ACPI) to wake it up. In this case, the GPE from _PRW only
works for first cable plugging but fails to notify the driver for
subsequent plugging events.
The issue was originally found on CNP, but the same issue can be found
on ADL too. So workaround the issue by continuing use PME poll after
first ACPI wake. As PME poll is always used, the runtime suspend
restriction for CNP can also be removed.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.
When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.
While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.
So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.
Fixes: 8e8ae64524 ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take over maintainership of the nfp driver from Simon as he
is moving away from Corigine.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds MQPRIO Qdisc offload in full 'channel' mode which allows
not only setting up pri:tc mapping, but also configuring TX shapers on
external port FIFOs. The K3 CPSW MQPRIO Qdisc offload is expected to work
with VLAN/priority tagged packets. Non-tagged packets have to be mapped
only to TC0.
- TX traffic classes must be rated starting from TC that has highest
priority and with no gaps
- Traffic classes are used starting from 0, that has highest priority
- min_rate defines Committed Information Rate (guaranteed)
- max_rate defines Excess Information Rate (non guaranteed) and offloaded
as (max_rate[i] - tcX_min_rate[i])
- VLAN/priority tagged packets mapped to TC0 will exit switch with VLAN tag
priority 0
The configuration example:
ethtool -L eth1 tx 5
ethtool --set-priv-flags eth1 p0-rx-ptype-rrobin off
tc qdisc add dev eth1 parent root handle 100: mqprio num_tc 3 \
map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 hw 1 mode channel \
shaper bw_rlimit min_rate 0 100mbit 200mbit max_rate 0 101mbit 202mbit
tc qdisc replace dev eth2 handle 100: parent root mqprio num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 hw 1
ip link add link eth1 name eth1.100 type vlan id 100
ip link set eth1.100 type vlan egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
In the above example two ports share the same TX CPPI queue 0 for low
priority traffic. 3 traffic classes are defined for eth1 and mapped to:
TC0 - low priority, TX CPPI queue 0 -> ext Port 1 fifo0, no rate limit
TC1 - prio 2, TX CPPI queue 1 -> ext Port 1 fifo1, CIR=100Mbit/s, EIR=1Mbit/s
TC2 - prio 3, TX CPPI queue 2 -> ext Port 1 fifo2, CIR=200Mbit/s, EIR=2Mbit/s
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Next patch will introduce yet another type attribute reply. Add a macro
that can handle attribute timeouts for all of the structs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In direct_io_relax mode, there can be shared mmaped files and thus dirty
pages in its page cache. Therefore those dirty pages should be written
back to backend before direct io to avoid data loss.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Reviewed-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FOPEN_DIRECT_IO is usually set by fuse daemon to indicate need of strong
coherency, e.g. network filesystems. Thus shared mmap is disabled since it
leverages page cache and may write to it, which may cause inconsistence.
But FOPEN_DIRECT_IO can be used not for coherency but to reduce memory
footprint as well, e.g. reduce guest memory usage with virtiofs.
Therefore, add a new fuse init flag FUSE_DIRECT_IO_RELAX to relax
restrictions in that mode, currently, it allows shared mmap. One thing to
note is to make sure it doesn't break coherency in your use case.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230814180921.3336-1-aboutphysycs@gmail.com
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230811191548.3340-1-aboutphysycs@gmail.com
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com
