Support the new verb which indicates dmabuf support. bnxt doesn't support
ODP. So use the pinned version of the dmabuf APIs to enable bnxt_re
devices to work as dmabuf importer.
Link: https://lore.kernel.org/r/1690790473-25850-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some systems using CS35L41 with HDA were released without some
required _DSD properties in ACPI. To support these special cases,
add an api to configure the correct properties for systems with
this issue.
This initial commit moves the no _DSD support for Lenovo
Legion Laptops (CLSA0100, CLSA0101) into a new framework which
can be extended to support additional laptops in the future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815161033.3519-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Turns out we can avoid the memmove() by using skip_spaces() and strim().
We did that in gpio-consumer, let's do it in gpio-sim.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
A fairly large collection of fixes here, mostly SOF and Intel related.
The one core fix is Hans' change which reduces the log spam when working
out new use cases for DPCM.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTbq9kACgkQJNaLcl1U
h9DjOwf+LH6skuS33cgeXKBEWdu5xP1WJ82y7Xjfr+kzecSZSSQEBI1NJgEBHNbk
yd4ZnCnTy2/WKdj/IxsuifK8WrqT8jIpWXw25SUeYw+VavgLDXfDZvzmQaO0oigR
ACIwhgtJJshlYzNIYvwyL2CMjZPliGEr6LGLA2Da4lxFivo9JFN2imRzS/k5aQ2o
YdsVg0xH/TytNUZ//gJh1HaRfOzu1hsqAawzcWnTAEX1EadViZSAFHsdn02VA2Yg
gLONXU+w1WrsKkTgUnrnAgnFDvda06KIO17M+bNXkiDZa+wVMJ2Zh8p89j4psHBN
d+JpY9PQHcyx0BEufvtCYHsdfAh7cg==
=zEhY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A fairly large collection of fixes here, mostly SOF and Intel related.
The one core fix is Hans' change which reduces the log spam when working
out new use cases for DPCM.
The Goodix touchscreen controller with ACPI ID GDX9110 was not recognized
by the goodix driver. This patch adds this ID to the list of supported IDs,
allowing the driver to be used with this device. The change will allow
Linux to be used on ~1 million tablet devices used in Kenyan primary
schools.
Signed-off-by: Felix Engelhardt <felix.engelhardt@eidu.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230807124723.382899-1-felix.engelhardt@eidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Before adding a new FW control, its name is checked against
existing controls list. But the string length in strncmp used
to compare controls names is taken from the list, so if beginnings
of the controls are matching, then the new control is not created.
For example, if CAL_R control already exists, CAL_R_SELECTED
is not created.
The fix is to compare string lengths as well.
Fixes: 6477960755 ("ASoC: wm_adsp: Move check for control existence")
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815172908.3454056-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'version' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
rockchip_pdm.c:587:18: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'devtype' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
wm8904.c:2205:21: error: cast to smaller integer type 'enum wm8904_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
tlv320aic32x4.c:1352:18: error: cast to smaller integer type 'enum aic32x4_type' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Use the FIRMWARE_MISSING flag in the CS35L56 to determine whether it is
safe to download a firmware patch.
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the widget name as a prefix for the kcontrol name is quite
useful in the case of multiple pipelines going to the same endpoint,
but it's overkill in simpler cases.
This patchset extends the existing DAPM code to drop the widget name
prefix and make the kcontrol names simpler when there's no possible
ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main
Playback Volume".
Fix copy-paste error in MODULE_DEVICE_TABLE() for the OF table,
use the 'of' first parameter instead of duplicate 'i2c'.
Fixes: ee4e80b296 ("leds: pca995x: Add support for PCA995X chips")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230809125314.531806-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
The driver references some firmware files that don't have corresponding
MODULE_FIRMWARE macros and thus won't be listed via modinfo. Fix that.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Patchwork: https://patchwork.freedesktop.org/patch/543290/
[rob: drop a690_gmu.bin as a690 is using same fw as a660 now]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pull MD fixes from Song:
"1. raid6test build fixes, by WANG Xuerui
2. Various non-urgent fixes."
* tag 'md-next-20230814-resend' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
raid6: test: cosmetic cleanups for the test Makefile
raid6: guard the tables.c include of <linux/export.h> with __KERNEL__
raid6: remove the <linux/export.h> include from recov.c
md: Hold mddev->reconfig_mutex when trying to get mddev->sync_thread
md/raid10: fix a 'conf->barrier' leakage in raid10_takeover()
md: raid1: fix potential OOB in raid1_remove_disk()
md/raid5-cache: fix a deadlock in r5l_exit_log()
r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is
empty, and then submit 'flush_bio', however, r5l_log_flush_endio()
is clearing the list first and then clear the bio, which will cause
null-ptr-deref:
T1: submit flush io
raid5d
handle_active_stripes
r5l_flush_stripe_to_raid
// list is empty
// add 'io_end_ios' to the list
bio_init
submit_bio
// io1
T2: io1 is done
r5l_log_flush_endio
list_splice_tail_init
// clear the list
T3: submit new flush io
...
r5l_flush_stripe_to_raid
// list is empty
// add 'io_end_ios' to the list
bio_init
bio_uninit
// clear bio->bi_blkg
submit_bio
// null-ptr-deref
Fix this problem by clearing bio before clearing the list in
r5l_log_flush_endio().
Fixes: 0dd00cba99 ("raid5-cache: fully initialize flush_bio when needed")
Reported-and-tested-by: Corey Hickey <bugfood-ml@fatooh.org>
Closes: https://lore.kernel.org/all/cddd7213-3dfd-4ab7-a3ac-edd54d74a626@fatooh.org/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Altivec is only available for powerpc hosts, so only check for its
availability when the host is powerpc, to avoid error messages being
shown on architectures other than x86, arm or powerpc.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Link: https://lore.kernel.org/r/20230731104911.411964-6-kernel@xen0n.name
Signed-off-by: Song Liu <song@kernel.org>
Currently when the raid6test utility is built, the resulting binary and
an int.uc file are not being ignored, which can get inadvertently
committed as a result when one works on the raid6 code. Ignore them to
make `git status` clean at all times.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Link: https://lore.kernel.org/r/20230731104911.411964-5-kernel@xen0n.name
Signed-off-by: Song Liu <song@kernel.org>
Use tabs/spaces consistently: hard tabs for marking recipe lines only,
spaces for everything else.
Also, the OPTFLAGS declaration actually included the tabs preceding the
line comment, making compiler invocation lines unnecessarily long. As
the entire block of declarations are meant for ad-hoc customization
(otherwise they would probably make use of `?=` instead of `=`), move
the "Adjust as desired" comment above the block too to fix the long
invocation lines.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Link: https://lore.kernel.org/r/20230731104911.411964-4-kernel@xen0n.name
Signed-off-by: Song Liu <song@kernel.org>
The export directives for the tables are already emitted with __KERNEL__
guards, but the <linux/export.h> include is not, causing errors when
building the raid6test program. Guard this include too to fix the
raid6test build.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Link: https://lore.kernel.org/r/20230731104911.411964-3-kernel@xen0n.name
Signed-off-by: Song Liu <song@kernel.org>
There is no exported symbol left in recov.c, so the include is now
unnecessary, and breaks the raid6test build. Remove it.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Link: https://lore.kernel.org/r/20230731104911.411964-2-kernel@xen0n.name
Signed-off-by: Song Liu <song@kernel.org>
Commit ba9d9f1a707f ("Revert "md: unlock mddev before reap sync_thread in
action_store"") removed the scenario of calling md_unregister_thread()
without holding mddev->reconfig_mutex, so add a lock holding check before
acquiring mddev->sync_thread by passing mdev to md_unregister_thread().
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230803071711.2546560-1-lilingfeng@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
After commit b39f35ebe8 ("md: don't quiesce in mddev_suspend()"),
'conf->barrier' will be leaked in the case that raid10 takeover raid0:
level_store
pers->takeover -> raid10_takeover
raid10_takeover_raid0
WRITE_ONCE(conf->barrier, 1)
mddev_suspend
// still raid0
mddev->pers = pers
// switch to raid10
mddev_resume
// resume without suspend
After the above commit, mddev_resume() will not decrease 'conf->barrier'
that is set in raid10_takeover_raid0().
Fix this problem by not setting 'conf->barrier' in raid10_takeover_raid0().
By the way, this problem is found while I'm trying to make
mddev_suspend/resume() to be independent from raid personalities. raid10
is the only personality to use reference count in the quiesce() callback
and this problem is only related to raid10.
Fixes: b39f35ebe8 ("md: don't quiesce in mddev_suspend()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20230731022800.1424902-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
If rddev->raid_disk is greater than mddev->raid_disks, there will be
an out-of-bounds in raid1_remove_disk(). We have already found
similar reports as follows:
1) commit d17f744e88 ("md-raid10: fix KASAN warning")
2) commit 1ebc2cec0b ("dm raid: fix KASAN warning in raid5_remove_disk")
Fix this bug by checking whether the "number" variable is
valid.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/tencent_0D24426FAC6A21B69AC0C03CE4143A508F09@qq.com
Signed-off-by: Song Liu <song@kernel.org>
Commit b13015af94 ("md/raid5-cache: Clear conf->log after finishing
work") introduce a new problem:
// caller hold reconfig_mutex
r5l_exit_log
flush_work(&log->disable_writeback_work)
r5c_disable_writeback_async
wait_event
/*
* conf->log is not NULL, and mddev_trylock()
* will fail, wait_event() can never pass.
*/
conf->log = NULL
Fix this problem by setting 'config->log' to NULL before wake_up() as it
used to be, so that wait_event() from r5c_disable_writeback_async() can
exist. In the meantime, move forward md_unregister_thread() so that
null-ptr-deref this commit fixed can still be fixed.
Fixes: b13015af94 ("md/raid5-cache: Clear conf->log after finishing work")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230708091727.1417894-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
IPQ4019 has more networking related resets that will be required for future
wired networking support, so lets add them.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20230814104119.96858-2-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings for the missing networking resets found in IPQ4019 GCC.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814104119.96858-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We already have a few symbols exported in the namespace.
Let's do the same for others (except PM for now).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use memdup_user_nul() helper instead of open-coding
to simplify the code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230815114815.1551171-1-ruanjinjie@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of the "class" argument name in the ioprio_value() inline
function in include/uapi/linux/ioprio.h confuses C++ compilers
resulting in compilation errors such as:
/usr/include/linux/ioprio.h:110:43: error: expected primary-expression before ‘int’
110 | static __always_inline __u16 ioprio_value(int class, int level, int hint)
| ^~~
for user C++ programs including linux/ioprio.h.
Avoid these errors by renaming the arguments of the ioprio_value()
function to prioclass, priolevel and priohint. For consistency, the
arguments of the IOPRIO_PRIO_VALUE() and IOPRIO_PRIO_VALUE_HINT() macros
are also renamed in the same manner.
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: 01584c1e23 ("scsi: block: Improve ioprio value validity checks")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20230814215833.259286-1-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().
The encode_dma() had two checks:
if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
return -EINVAL;
The in_trans->addr variable is the starting address. The in_trans->size
variable is the total size of the transfer. The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.
This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).
I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size. If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense. If there are zero bytes
remaining to be copied, just return success.
The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts. First check that "in_trans->addr +
resources->xferred_dma_size" is safe. Then check that "xfer_start_addr +
remaining" is safe.
My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits. So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit
systems.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain
The temporary buffer storing slicing configuration data from user is only
freed on error. This is a memory leak. Free the buffer unconditionally.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com
Raag Jadav <raag.jadav@intel.com> says:
This series exports common pinctrl functions that are used across
Intel specific platform drivers to PINCTRL_INTEL namespace and
reuses them into Baytrail, Cherryview and Lynxpoint drivers.
This helps reduce their code and memory footprint.
X86 kernels are fairly unikernels such that pinctrl-intel driver is
enabled by most Linux distributions and most Intel specific platform
drivers (inside drivers/pinctrl/intel) depend on it.
The only exception to this is Lynxpoint. But taking into account its
fairly old age, it wouldn't suffer much from pinctrl-intel dependency.
bloat-o-meter:
==============
Intel:
add/remove: 17/10 grow/shrink: 0/0 up/down: 375/-319 (56)
Total: Before=9598, After=9654, chg +0.58%
Baytrail:
add/remove: 1/6 grow/shrink: 0/2 up/down: 41/-441 (-400)
Total: Before=16538, After=16138, chg -2.42%
Cherryview:
add/remove: 1/6 grow/shrink: 2/0 up/down: 90/-272 (-182)
Total: Before=18133, After=17951, chg -1.00%
Lynxpoint:
add/remove: 1/6 grow/shrink: 0/1 up/down: 24/-354 (-330)
Total: Before=7836, After=7506, chg -4.21%
Link: https://lore.kernel.org/r/20230814060311.15945-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
While at it, select pinctrl-intel for Intel Lynxpoint driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-5-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Export common pinctrl functions that are used across Intel specific
platform drivers, so that they can be reused.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Raag Jadav <raag.jadav@intel.com> says:
Merrifield and Moorefield pinctrl driver implementations are similar
in terms of how they access the hardware. We can consolidate their
pinctrl functionalities into a common library driver.
This patch set introduces:
1. Intel Tangier driver that supports the common pinctrl functionalities
for Merrifield and Moorefield platforms.
2. Intel Tangier adaptation for Merrifield pinctrl driver.
3. Intel Tangier adaptation for Moorefield pinctrl driver.
Tested on Intel Edison platform.
No deviation observed in the contents of below entries before and after
this patchset.
- /proc/interrupts
- /sys/kernel/debug/gpio
- /sys/kernel/debug/pinctrl/*/pins
Link: https://lore.kernel.org/r/20230814054033.12004-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Tangier implements the common pinctrl functionalities for
Merrifield and Moorefield platforms.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20230814054033.12004-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Emil pointed out that "13010000 sorts after 12070000". Reshuffle the
entries to be in-order.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
