When gso.hdr_len is zero and a packet is transmitted via write() or
writev(), all payload is treated as header which requires a contiguous
memory allocation. This allocation request is harder to satisfy, and may
even fail if there is enough fragmentation.
Note that sendmsg() code path limits the linear copy length, so this change
makes write()/writev() and sendmsg() paths more consistent.
Signed-off-by: Tahsin Erdogan <trdgn@amazon.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230809164753.2247594-1-trdgn@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver init/exit() function don't do anything special, it
can use the module_pci_driver() macro to eliminate boilerplate
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230810014633.3084355-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 61c9fed416 ("[SCTP]: A better solution to fix the race between sctp_peeloff()
and sctp_rcv().") removed the implementation but left declaration in place. Remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230809142323.9428-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry to the same thing with pfn_to_virt().
In order to do this we move the virt_to_phys() and
phys_to_virt() below the definitions of the __pa()
and __va() macros so it compiles. The macro version was also
able to do recursive symbol resolution.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
The virt_to_pfn() function takes a (void *) as argument, fix
this up to avoid exploiting the unintended polymorphism of
virt_to_pfn.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
The final icache_flush was in the update_mmu_cache, and update_mmu_cache
is after the set_pte_at. Thus, when CPU0 sets the pte, the other CPU
would see it before the icache_flush broadcast happens, and their
icaches may have cached stale VIPT cache lines in their I-caches. When
address translation was ready for the new cache line, they will use the
stale data of icache, not the fresh one of the dcache.
The csky instruction cache is VIPT, and it needs an origin virtual
address to invalidate the virtual address index entries of cache ways.
The current implementation uses a temporary mapping mechanism -
kmap_atomic, which returns a new virtual address for invalidation. But,
the original virtual address cache line may still in the I-cache.
So force invalidation I-cache in update_mmu_cache, and prevent
flush_dcache when there is an EXEC page. This bug was detected in the
4*c860 SMP system, and this patch could pass the stress test.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b74 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 43e3692101 ("caif: Move refcount from service layer to sock and dev.")
declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809134943.37844-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross merge x86 fixes to fix clang linking errors:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:221: at least one side of the expression must be absolute
These will hopefully be downstream by the time we ship
the next batch of fixes.
* 'x86/bugs' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
Link: https://lore.kernel.org/all/CAHk-=wj_b+FGTnevQSBAtCWuhCk=0oQ_THvthBW2hzqpOTLFmg@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix a possible null pointer dereference issue in
exynos_drm_crtc_atomic_disable(), which was reported by
the automatic static analysis tool. And below is a relevant link,
https://sites.google.com/view/basscheck/home
Cleanup
- drop the use of of_match_ptr which is redundant.
-----BEGIN PGP SIGNATURE-----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=ZP22
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Fixup
- fix a possible null pointer dereference issue in
exynos_drm_crtc_atomic_disable(), which was reported by
the automatic static analysis tool. And below is a relevant link,
https://sites.google.com/view/basscheck/home
Cleanup
- drop the use of of_match_ptr which is redundant.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809060216.374042-1-inki.dae@samsung.com
DYNAMIC_POWER does not seem to be used anywhere in the tree, remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Andrew Lunn says:
====================
Support offload LED blinking to PHY.
Allow offloading of the LED trigger netdev to PHY drivers and
implement it for the Marvell PHY driver. Additionally, correct the
handling of when the initial state of the LED cannot be represented by
the trigger, and so an error is returned. As with ledtrig-timer,
disable offload when the trigger is deactivate, or replaced by another
trigger.
====================
Link: https://lore.kernel.org/r/20230808210436.838995-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure that the offloading of blinking is stopped when the trigger is
deactivated. Calling led_set_brightness() is documented as stopping
offload and setting the LED to a constant brightness.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the code needed to indicate if a given blinking pattern can be
offloaded, to offload a pattern and to try to return the current
pattern.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-4-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux LEDs can be requested to perform hardware accelerated blinking
to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
driver, if it implements the ops needed to determine if a given
pattern can be offloaded, to offload it, and what the current offload
is. Additionally implement the op needed to get what device the LED is
for.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the netdev trigger is activates, it tries to determine what
device the LED blinks for, and what the current blink mode is.
The documentation for hw_control_get() says:
* Return 0 on success, a negative error number on failing parsing the
* initial mode. Error from this function is NOT FATAL as the device
* may be in a not supported initial state by the attached LED trigger.
*/
For the Marvell PHY and the Armada 370-rd board, the initial LED blink
mode is not supported by the trigger, so it returns an error. This
resulted in not getting the device the LED is blinking for. As a
result, the device is unknown and offloaded is never performed.
Change to condition to always get the device if offloading is
supported, and reduce the scope of testing for an error from
hw_control_get() to skip setting trigger internal state if there is an
error.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The module_mhi_driver() will set "THIS_MODULE" to driver.owner when
register a mhi_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808021238.2975585-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using a fixed-link setup, certain devices like the SJA1105 require a
small pause in the TXC clock line to enable their internal tunable
delay line (TDL).
To satisfy this requirement, this patch temporarily disables the TX clock,
and restarts it after a required period. This provides the required
silent interval on the clock line for SJA1105 to complete the frequency
transition and enable the internal TDLs. This action occurs before the link
is built up, so it does not impact a normal device too. There is no
need to identify if the connected device is an SJA1105 alike or not during
the implementation.
So far we have only enabled this feature on the i.MX93 platform.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-3-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.
The mode can be one the following:
MLO_AN_PHY - Conventional PHY
MLO_AN_FIXED - Fixed-link mode
MLO_AN_INBAND - In-band protocol
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Null-checking state suggests that it may be null, but it has already
been dereferenced on drm_atomic_get_new_plane_state(state, plane).
The parameter state will never be NULL currently, so just remove the
state is NULL flow in this function.
Fixes: 5ddb0bd4dd ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
CERT-C Characters and Strings (CERT STR31-C)
all_drm_priv[cnt] evaluates to an address that could be at negative
offset of an array.
In mtk_drm_get_all_drm_priv():
Guarantee that storage for strings has sufficient space for character
data and the null terminator.
So change cnt to unsigned int and check its max value.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fixing the coverity issue of:
mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle
So remove the free function.
Fixes: 7627122fd1 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mediatek drm drivers from always returning zero in
the remove callback to the void returning variant.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230801110239.831099-8-u.kleine-koenig@pengutronix.de/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
A previous commit added a lockdep annotation, but botched it. Use the
right type.
Fixes: 4eb44d1076 ("block: remove init_mutex and open-code blk_iolatency_try_init")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was noticed that if the very first 'stealing' request failed to
create for some reason then the 'steal all ids' loop would immediately
exit with 'last' still being NULL. The test would attempt to continue
but using a null pointer. Fix that by aborting the test if it fails to
create any requests at all.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802184940.911753-1-John.C.Harrison@Intel.com
C6x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C6x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP nodes defined in the top-level J784s4 SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix these fss node warnings that dtbs_check throws:
fss@47000000: $nodename:0: 'fss@47000000' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
By renaming fss to bus.
Cc: Nishant Menon <nm@ti.com>
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Reid Tonking <reidt@ti.com>
Link: https://lore.kernel.org/r/20230810081847.277094-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
I think there are limit checks in place for most things but the
new uAPI wants to not have them.
Add a limit check and use the vmemdup_user helper instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZNRx8QAKCRBar9k/UBDW
46MBAQC3YDFsEfPzX4P7ZnlM5Lf1NynjNbso5bYW0TF/dp/Y+gD+M8wdM5Vj2Mb0
Zr56TnwCJei0kGBemiel4sStt3e4qwY=
=+0u+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-09
We've added 19 non-merge commits during the last 6 day(s) which contain
a total of 25 files changed, 369 insertions(+), 141 deletions(-).
The main changes are:
1) Fix array-index-out-of-bounds access when detaching from an
already empty mprog entry from Daniel Borkmann.
2) Adjust bpf selftest because of a recent llvm change
related to the cpu-v4 ISA from Eduard Zingerman.
3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa.
4) Fix a KASAN splat due to the kernel incorrectly accepted
an invalid program using the recent cpu-v4 instruction from
Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: btf: Remove two unused function declarations
bpf: lru: Remove unused declaration bpf_lru_promote()
selftests/bpf: relax expected log messages to allow emitting BPF_ST
selftests/bpf: remove duplicated functions
bpf, docs: Fix small typo and define semantics of sign extension
selftests/bpf: Add bpf_get_func_ip test for uprobe inside function
selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry
bpf: Add support for bpf_get_func_ip helper for uprobe program
selftests/bpf: Add a movsx selftest for sign-extension of R10
bpf: Fix an incorrect verification success with movsx insn
bpf, docs: Formalize type notation and function semantics in ISA standard
bpf: change bpf_alu_sign_string and bpf_movsx_string to static
libbpf: Use local includes inside the library
bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR.
bpf: fix inconsistent return types of bpf_xdp_copy_buf().
selftests/bpf: fix the incorrect verification of port numbers.
selftests/bpf: Add test for detachment on empty mprog entry
bpf: Fix mprog detachment for empty mprog entry
bpf: bpf_struct_ops: Remove unnecessary initial values of variables
====================
Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never use io_move_task_work_from_local() before it's defined in the
file anyway, so kill the forward declaration.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The VOP on Rockchip's RV1126 SoC is different from other SoC's
VOP implementations, so add a separate compatible for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-6-jagan@edgeble.ai
The Main supply volatge for Edgeble Neu2 IO board is 12V DC.
Add the 12v supply regulator for it and input to vcc5v0_sys.
Since the power regulator is part of IO board circuit, move the
regulator in IO dts file.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731103518.2906147-14-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EMMC_RSTN GPIO1_A3 is connected to FSPI_CLK in Edgeble Neu2
board.
So, drop the same GPIO pin from eMMC.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731103518.2906147-11-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
