kexec_mutex is replaced by an atomic variable
in 05c6257433 (panic, kexec: make __crash_kexec() NMI safe).
But there are still two comments that referenced kexec_mutex,
replace them by kexec_lock.
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
smatch reports the warning below:
drivers/infiniband/core/uverbs_std_types_counters.c:110
ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr'
dereferencing possible ERR_PTR()
The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking
the value of uattr before using it.
Fixes: ebb6796bd3 ("IB/uverbs: Add read counters support")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the affinity between QP cache and CQ cache is not
considered when assigning QPN, it will affect the message rate of HW.
Allocate QPN from QP cache with better CQ affinity to get better
performance.
Fixes: 71586dd200 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch fixes inaccurate error label name in init instance.
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.
For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.
This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.
Fixes: 01584a5edc ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
HW supports a variety of different speed, but the current speed
is fixed.
The real speed should be querried from ethernet.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the jz4740 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-jz-maple-v1-1-3f745adf96e5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reformat the code to match Linuxn coding style: re-indent continued
lines and stop too-early line wrapping, drop unneeded {} brackets. No
functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98926 and MAX98927 are quite similar and use the same bindings,
although drivers were not implementing them in the same way:
MAX98926 has boolean "interleave-mode" but MAX98927 has uint32
"interleave_mode". Unify them under maxim,interleave-mode, already used
in other Maxim device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim Integrated MAX98925/MAX98926/MAX98927 speaker
amplifier bindings to DT schema format. Changes during conversion:
1. Add "sound-dai-cells", already used by DTS.
2. Use "maxim,interleave-mode" instead previous "interleave-mode" and
undocumented but used interleave_mode.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
bnxt_qplib_rcfw_alloc_sbuf allocates 24 bytes and it is better to fit
on stack variables. This way we can avoid unwanted kmalloc call.
Call dma_alloc_coherent directly instead of wrapper
bnxt_qplib_rcfw_alloc_sbuf.
Also, FW expects the side buffer needs to be aligned to
BNXT_QPLIB_CMDQE_UNITS(16B). So align the size to have the
extra padding bytes.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1691052326-32143-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver has not accounted QP1 for virtual functions
when fetching device attributes and hence max_qp
count is one less than active_qp count. Fixed driver
so that it counts QP1 for virtual functions as well
while fetching device attributes
Fixes: ccd9d0d3df ("RDMA/bnxt_re: Enable RoCE on virtual functions")
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1691052326-32143-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> #
Link: https://lore.kernel.org/r/20230802093238.975906-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230801102453.1798292-1-Naresh.Solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new dt-binding header that details the interrupt number of the GPIO.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230724060108.1403662-2-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver does not map jack pins to kcontrols that PulseAudio/PipeWire
need to handle jack detection events. The WM1811 codec used here seems
to support detecting Headphone and Headset Mic connections. Expose each
to userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-28-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is also mapping Line Out jack detection events
to the Headphone kcontrol.
The WM5100 codec used here can distinguish Line Out connections from
Headphone connections. Decouple the two, expose Line Out to userspace as
an independent kcontrol and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-27-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The WM8958 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-26-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here supports detecting Headphone and Headset Mic connections. Expose
both to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-25-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit d0508b4f16 ("ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols
for jack detection") maps kcontrols for Headphones and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle insertion
events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-24-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5663 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-23-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
