Commit 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mat Martineau says:
====================
mptcp: convert Netlink code to use YAML spec
This series from Davide converts most of the MPTCP Netlink interface
(plus uAPI bits) to use sources generated by YNL using a YAML spec file.
This new YAML file is useful to validate the API and to generate a good
documentation page.
Patch 1 modifies YNL spec to support "uns-admin-perm" for genetlink
legacy.
Patch 2 adds support for validating exact length of netlink attrs.
Patch 3 converts Netlink structures from small_ops to ops to prepare the
switch to YAML.
Patch 4 adds the Netlink YAML spec for MPTCP.
Patch 5 adds and uses a new header file generated from the new YAML
spec.
Patch 6 renames some handlers to match the ones generated from the YAML
spec.
Patch 7 adds and uses Netlink policies automatically generated from the
YAML spec.
====================
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-0-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in the current MPTCP control plane, all operations use a netlink
attribute of the same type "MPTCP_PM_ATTR". However, add/del/get/flush
operations only parse the first element in the message _ the one that
describes MPTCP endpoints (that was named MPTCP_PM_ATTR_ADDR and
mostly used in ADD_ADDR operations _ probably the similarity of "attr",
"addr" and "add" might cause some confusion to human readers).
Convert MPTCP from 'small_ops' to 'ops', thus allowing different attributes
for each single operation, hopefully makes all this clearer to human
readers.
- use a separate attribute set for add/del/get/flush address operation,
binary compatible with the existing one, to store the endpoint address.
MPTCP_PM_ENDPOINT_ADDR is added to the uAPI (with the same value as
MPTCP_PM_ATTR_ADDR) for these operations.
- convert mptcp_pm_ops[] and add policy files accordingly.
this prepares MPTCP control plane to be described as YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-3-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
this flag maps to GENL_UNS_ADMIN_PERM and will be used by future specs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-1-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add GPE quirk entry for HP 250 G7 Notebook PC.
This change allows the lid switch to be identified as the lid switch
and not a keyboard button. With the lid switch properly identified, the
device triggers suspend correctly on lid close.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZTfz/QAKCRDdBJ7gKXxA
joMyAP99hLaLYeJbjlf+4tLJzhlpbVoFra1ieun2D+ZgFE78xQD/T4T3PYrZhYqD
WdrxGT9fiKOykXM5pmQRH9Zr4EvJBA0=
=Obbk
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_dev_uid_match() helper that matches the device with
supplied _UID string.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by
the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399.
Also add support for 10-bit 4:4:4 format while at it.
V5: Use drm_format_info_min_pitch() for correct bpp
Add missing NV21, NV61 and NV42 formats
V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368
V2: Added NV30 support
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled
variant of NV15, a 10-bit 2-plane YUV format that has no padding between
components. Instead, luminance and chrominance samples are grouped into 4s
so that each group is packed into an integer number of bytes:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '20' and '30' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a multiple
of 4.
V2: Added NV30 format
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-2-jonas@kwiboo.se
'modalias' is only written with snprintf() and it is already guaranteed
to be nul-terminated, so remove the unneeded (but harmless) writes of a
trailing '\0' to it.
Also snprintf() never returns negative values, so remove redundant (but
harmless) checks for it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
snprintf() does not return negative values on error.
To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.
Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
formats_win_full_10bit is for cluster window,
formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window
will support more format.
formats_win_lite is for smart window.
Rename it based the windows type may let meaning is clearer
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094339.2476142-1-andyshrk@163.com
The cluster window on vop2 doesn't support linear yuv
format(NV12/16/24), it only support afbc based yuv
format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be
added in next patch.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094239.2475851-1-andyshrk@163.com
We can't rely on cpp for bpp calculation as the cpp of
some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094210.2475771-1-andyshrk@163.com
Suzuki noticed that KVM's PMU emulation is oblivious to the NSU and NSK
event filter bits. On systems that have EL3 these bits modify the
filter behavior in non-secure EL0 and EL1, respectively. Even though the
kernel doesn't use these bits, it is entirely possible some other guest
OS does. Additionally, it would appear that these and the M bit are
required by the architecture if EL3 is implemented.
Allow the EL3 event filter bits to be set if EL3 is advertised in the
guest's ID register. Implement the behavior of NSU and NSK according to
the pseudocode, and entirely ignore the M bit for perf event creation.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The NSH bit, which filters event counting at EL2, is required by the
architecture if an implementation has EL2. Even though KVM doesn't
support nested virt yet, it makes no effort to hide the existence of EL2
from the ID registers. Userspace can, however, change the value of PFR0
to hide EL2. Align KVM's sysreg emulation with the architecture and make
NSH RES0 if EL2 isn't advertised. Keep in mind the bit is ignored when
constructing the backing perf event.
While at it, build the event type mask using explicit field definitions
instead of relying on ARMV8_PMU_EVTYPE_MASK. KVM probably should've been
doing this in the first place, as it avoids changes to the
aforementioned mask affecting sysreg emulation.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce new helper functions to set the guest's PMU
(kvm->arch.arm_pmu) either to a default probed instance or to a
caller requested one, and use it when the guest's PMU needs to
be set. These helpers will make it easier for the following
patches to modify the relevant code.
No functional change intended.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since transformation from ACPI driver to platform driver there are two
devices on which the driver operates - ACPI device and platform device.
For the sake of reader this calls for the distinction in their naming,
to avoid confusion. Rename device to adev, as corresponding
platform device is called pdev.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change the way sysfs files are created. Use dev_groups, as it's a
better approach - it allows to declare attributes, and the core code
would take care of the lifecycle of those objects.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_pad driver uses struct acpi_driver to register itself while it
would be more logically consistent to use struct platform_driver for this
purpose, because the corresponding platform device is present and the
role of struct acpi_device is to amend the other bus types. ACPI devices
are not meant to be used as proper representation of hardware entities,
but to collect information on those hardware entities provided by the
platform firmware.
Use struct platform_driver for registering the acpi_pad driver.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Slow devices such as flash may not meet the default 1ms timeout value,
so use the ERST max execution time value that they provide as the
timeout if it is larger.
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to support burst mode, vendor drivers set lane_mbps higher than
bandwidth through DPI interface. So, calculate horizontal component lane
byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for
burst mode.
Fixes: ac87d23694 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc")
Reported-by: Heiko Stübner <heiko@sntech.de>
Closes: https://lore.kernel.org/linux-arm-kernel/5979575.UjTJXf6HLC@diego/T/#u
Tested-by: Heiko Stübner <heiko@sntech.de> # px30 minievb with xinpeng xpp055c272
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018035212.1778767-1-victor.liu@nxp.com
The mtk_clk_register_pll_ops() currently frees the "pll" parameter.
The function has two callers, mtk_clk_register_pll() and
mtk_clk_register_pllfh(). The first one, the _pll() function relies on
the free, but for the second _pllfh() function it causes a double free
bug.
Really the frees should be done in the caller because that's where
the allocation is.
Fixes: d7964de8a8 ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd7fa365-28cc-4c34-ac64-6da57c98baa6@moroto.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A bug was recently found via CONFIG_DEBUG_ENTRY=y, and the x86
tree kinda is the main source of changes to the x86 entry code,
so enable this debug option by default in our defconfigs.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android
with a custom kernel as factory OS, does not list the used WM5102 codec
inside its DSDT.
So acpi_dev_get_first_match_dev() is going to fail on this board.
Fallback to using "spi-$(mach->id)" as codec device name in this case
to allow bytcr_wm5102 to work on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two occurrences where variable tdm_con is being initialized
to zero and the next statement re-assigns tdm_con to a new value. The
initializations are redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023151704.670240-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The common reserved-memory bindings have recently been copied from the
kernel tree into dtschema. The preference is to host common, stable
bindings in dtschema. As reserved-memory is documented in the DT Spec,
it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory
schemas we depend on, so bump the minimum version to that. Otherwise,
references to these schemas will generate errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20231013200851.347042-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Currently drm_client_buffer_addfb() uses the legacy drm_mode_addfb(),
which uses bpp and depth to guess the wanted buffer format.
However, drm_client_buffer_addfb() already knows the exact buffer
format, so there is no need to convert back and forth between buffer
format and bpp/depth, and the function can just call drm_mode_addfb2()
directly instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b84adfc686288714e69d0442d22f1259ff74903.1697379891.git.geert@linux-m68k.org
The logic of whether filesystem can encode/decode file handles is open
coded in many places.
In preparation to changing the logic, move the open coded logic into
inline helpers.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
According to the conversation in the following link:
https://lore.kernel.org/linux-iommu/20231020135501.GG3952@nvidia.com/
The enforce_cache_coherency should be set/enforced in the hwpt allocation
routine. The iommu driver in its attach_dev() op should decide whether to
reject or not a device that doesn't match with the configuration of cache
coherency. Drop the enforce_cache_coherency piece in the attach/replace()
and move the remaining "num_devices" piece closer to the refcount that is
using it.
Accordingly drop its function prototype in the header and mark it static.
Also add some extra comments to clarify the expected behaviors.
Link: https://lore.kernel.org/r/20231024012958.30842-1-nicolinc@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Separate because this isn't as trivial as the other FIELD_GET() changes.
See 907830b0fc ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT
Pulse")
Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field
position, i.e., the shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Instead of using a literal to clear bits, add PCI_EXP_DPC_CTL_EN_MASK
and use the usual pattern to modify a bitfield.
While at it, rearrange RMW code more logically together.
Link: https://lore.kernel.org/r/20231018113254.17616-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use FIELD_GET() to remove dependencies on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
