Instead of using combination of normal IRQ and work item which required
careful handling on device teardown, use standard threaded interrupt that
allows communication wityh the chip over slow (I2C) bus directly in the
interrupt handler.
To support polling mode switch to standard polling support implemented by
the input core.
Link: https://lore.kernel.org/r/20230724051345.335219-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hayes Wang says:
====================
r8152: reduce control transfer
The two patches are used to reduce the number of control transfer when
access the registers in bulk.
====================
Link: https://lore.kernel.org/r/20230726030808.9093-417-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
could combine the control transfers into one control transfer.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce the control transfer if all bytes of first or the last DWORD are
written.
The original method is to split the control transfer into three parts
(the first DWORD, middle continuous data, and the last DWORD). However,
they could be combined if whole bytes of the first DWORD or last DWORD
are written. That is, the first DWORD or the last DWORD could be combined
with the middle continuous data, if the byte_en is 0xff.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-418-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.
Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
or aren't considered serious enough to justify backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZMRGzwAKCRDdBJ7gKXxA
jtWoAQDqD5yton3O/tPcCC2X7QbV5bsgghIqvQFo5yWvuiJdNwEAkKwLnXISAadg
RmVCgsfQ+4CCsJgp7RpPlMS43m2AQgI=
=Rib2
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"11 hotfixes. Five are cc:stable and the remainder address post-6.4
issues or aren't considered serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: fix hardware poison check in unpoison_memory()
proc/vmcore: fix signedness bug in read_from_oldmem()
mailmap: update remaining active codeaurora.org email addresses
mm: lock VMA in dup_anon_vma() before setting ->anon_vma
mm: fix memory ordering for mm_lock_seq and vm_lock_seq
scripts/spelling.txt: remove 'thead' as a typo
mm/pagewalk: fix EFI_PGT_DUMP of espfix area
shmem: minor fixes to splice-read implementation
tmpfs: fix Documentation of noswap and huge mount options
Revert "um: Use swap() to make code cleaner"
mm/damon/core-test: initialise context before test in damon_test_set_attrs()
Constify thermal_zone_device_register() parameters, which was omitted
by mistake, and fix a double free on thermal zone unregistration in
the generic DT thermal driver (Ahmad Fatoum).
-----BEGIN PGP SIGNATURE-----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=90Ib
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Constify thermal_zone_device_register() parameters, which was omitted
by mistake, and fix a double free on thermal zone unregistration in
the generic DT thermal driver (Ahmad Fatoum)"
* tag 'thermal-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix double-free on unregistration
thermal: core: constify params in thermal_zone_device_register
Fix the arming of wakeup IRQs in the generic wakeup IRQ code (wakeirq),
drop unused functions from it and fix up a driver using it and trying to
work around the IRQ arming issue in a questionable way (Johan Hovold).
-----BEGIN PGP SIGNATURE-----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=Z/aq
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the arming of wakeup IRQs in the generic wakeup IRQ code
(wakeirq), drop unused functions from it and fix up a driver using it
and trying to work around the IRQ arming issue in a questionable way
(Johan Hovold)"
* tag 'pm-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
serial: qcom-geni: drop bogus runtime pm state update
PM: sleep: wakeirq: drop unused enable helpers
PM: sleep: wakeirq: fix wake irq arming
Fix kernel-doc warning:
kernel/trace/trace_seq.c:142: warning: Function parameter or member
'args' not described in 'trace_seq_vprintf'
Link: https://lkml.kernel.org/r/20230724140827.1023266-5-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix kernel-doc warnings:
kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'buffer' not described in 'event_triggers_call'
kernel/trace/trace_events_trigger.c:59: warning: Function parameter
or member 'event' not described in 'event_triggers_call'
Link: https://lkml.kernel.org/r/20230724140827.1023266-4-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix kernel-doc warning:
kernel/trace/trace_events_synth.c:1257: warning: Function parameter
or member 'mod' not described in 'synth_event_gen_cmd_array_start'
Link: https://lkml.kernel.org/r/20230724140827.1023266-3-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix kernel-doc warnings:
kernel/trace/ring_buffer.c:954: warning: Function parameter or
member 'cpu' not described in 'ring_buffer_wake_waiters'
kernel/trace/ring_buffer.c:3383: warning: Excess function parameter
'event' description in 'ring_buffer_unlock_commit'
kernel/trace/ring_buffer.c:5359: warning: Excess function parameter
'cpu' description in 'ring_buffer_reset_online_cpus'
Link: https://lkml.kernel.org/r/20230724140827.1023266-2-cuigaosheng1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Several smaller driver fixes and a core RDMA CM regression fix:
- Fix improperly accepting flags from userspace in mlx4
- Add missing DMA barriers for irdma
- Fix two kcsan warnings in irdma
- Report the correct CQ op code to userspace in irdma
- Report the correct MW bind error code for irdma
- Load the destination address in RDMA CM to resolve a recent regression
- Fix a QP regression in mthca
- Remove a race processing completions in bnxt_re resulting in a crash
- Fix driver unloading races with interrupts and tasklets in bnxt_re
- Fix missing error unwind in rxe
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZMQLoQAKCRCFwuHvBreF
YQTWAQDWpBY7DEmi7AsJkjNg+ZSmxIIaSfWeEVgU9GQPBnTWlgD/eZrXUjVRkNXc
ZNMB6CjfQOy2XfdQm39kBM+kYnmYCgc=
=jNMH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several smaller driver fixes and a core RDMA CM regression fix:
- Fix improperly accepting flags from userspace in mlx4
- Add missing DMA barriers for irdma
- Fix two kcsan warnings in irdma
- Report the correct CQ op code to userspace in irdma
- Report the correct MW bind error code for irdma
- Load the destination address in RDMA CM to resolve a recent
regression
- Fix a QP regression in mthca
- Remove a race processing completions in bnxt_re resulting in a
crash
- Fix driver unloading races with interrupts and tasklets in bnxt_re
- Fix missing error unwind in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report correct WC error
RDMA/irdma: Fix op_type reporting in CQEs
RDMA/rxe: Fix an error handling path in rxe_bind_mw()
RDMA/bnxt_re: Fix hang during driver unload
RDMA/bnxt_re: Prevent handling any completions after qp destroy
RDMA/mthca: Fix crash when polling CQ for shared QPs
RDMA/core: Update CMA destination address on rdma_resolve_addr
RDMA/irdma: Fix data race on CQP request done
RDMA/irdma: Fix data race on CQP completion stats
RDMA/irdma: Add missing read barriers
RDMA/mlx4: Make check for invalid flags stricter
Daniel Xu says:
====================
Support defragmenting IPv(4|6) packets in BPF
=== Context ===
In the context of a middlebox, fragmented packets are tricky to handle.
The full 5-tuple of a packet is often only available in the first
fragment which makes enforcing consistent policy difficult. There are
really only two stateless options, neither of which are very nice:
1. Enforce policy on first fragment and accept all subsequent fragments.
This works but may let in certain attacks or allow data exfiltration.
2. Enforce policy on first fragment and drop all subsequent fragments.
This does not really work b/c some protocols may rely on
fragmentation. For example, DNS may rely on oversized UDP packets for
large responses.
So stateful tracking is the only sane option. RFC 8900 [0] calls this
out as well in section 6.3:
Middleboxes [...] should process IP fragments in a manner that is
consistent with [RFC0791] and [RFC8200]. In many cases, middleboxes
must maintain state in order to achieve this goal.
=== BPF related bits ===
Policy has traditionally been enforced from XDP/TC hooks. Both hooks
run before kernel reassembly facilities. However, with the new
BPF_PROG_TYPE_NETFILTER, we can rather easily hook into existing
netfilter reassembly infra.
The basic idea is we bump a refcnt on the netfilter defrag module and
then run the bpf prog after the defrag module runs. This allows bpf
progs to transparently see full, reassembled packets. The nice thing
about this is that progs don't have to carry around logic to detect
fragments.
=== Changelog ===
Changes from v5:
* Fix defrag disable codepaths
Changes from v4:
* Refactor module handling code to not sleep in rcu_read_lock()
* Also unify the v4 and v6 hook structs so they can share codepaths
* Fixed some checkpatch.pl formatting warnings
Changes from v3:
* Correctly initialize `addrlen` stack var for recvmsg()
Changes from v2:
* module_put() if ->enable() fails
* Fix CI build errors
Changes from v1:
* Drop bpf_program__attach_netfilter() patches
* static -> static const where appropriate
* Fix callback assignment order during registration
* Only request_module() if callbacks are missing
* Fix retval when modprobe fails in userspace
* Fix v6 defrag module name (nf_defrag_ipv6_hooks -> nf_defrag_ipv6)
* Simplify priority checking code
* Add warning if module doesn't assign callbacks in the future
* Take refcnt on module while defrag link is active
[0]: https://datatracker.ietf.org/doc/html/rfc8900
====================
Link: https://lore.kernel.org/r/cover.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These selftests tests 2 major scenarios: the BPF based defragmentation
can successfully be done and that packet pointers are invalidated after
calls to the kfunc. The logic is similar for both ipv4 and ipv6.
In the first scenario, we create a UDP client and UDP echo server. The
the server side is fairly straightforward: we attach the prog and simply
echo back the message.
The on the client side, we send fragmented packets to and expect the
reassembled message back from the server.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/33e40fdfddf43be93f2cb259303f132f46750953.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds support for enabling IP defrag using pre-existing
netfilter defrag support. Basically all the flag does is bump a refcnt
while the link the active. Checks are also added to ensure the prog
requesting defrag support is run _after_ netfilter defrag hooks.
We also take care to avoid any issues w.r.t. module unloading -- while
defrag is active on a link, the module is prevented from unloading.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/5cff26f97e55161b7d56b09ddcf5f8888a5add1d.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We want to be able to enable/disable IP packet defrag from core
bpf/netfilter code. In other words, execute code from core that could
possibly be built as a module.
To help avoid symbol resolution errors, use glue hooks that the modules
will register callbacks with during module init.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/f6a8824052441b72afe5285acedbd634bd3384c1.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve documentation for cpu=v4 instructions based on
David's suggestions.
Cc: bpf@ietf.org
Suggested-by: David Vernet <void@manifault.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728225105.919595-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I picked three small scale updates from my 'master' branch, which I think
would improve the quality of the release.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZMQGvhIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9IUqQEA9JdRSB36fPdVLYu0NRmkE5lY9hG6YPw1
lo0Z4738DD8A/iEewsym1k7Hvtae6Dh/kSNeljKAENDDWhMLzoV2zbkF
=cX64
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"I picked up three small scale updates that I think would improve the
quality of the release"
* tag 'tpmdd-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis: Explicitly check for error code
tpm: Switch i2c drivers back to use .probe()
security: keys: perform capable check only on privileged operations
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com
When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:
# cd /sys/kernel/tracing/
# 1. Enlarge ring buffer prepare for later reducing:
# echo 20 > per_cpu/cpu0/buffer_size_kb
# 2. Write a log into ring buffer of cpu0:
# taskset -c 0 echo "hello1" > trace_marker
# 3. Read the log:
# cat per_cpu/cpu0/trace_pipe
<...>-332 [000] ..... 62.406844: tracing_mark_write: hello1
# 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
# cat per_cpu/cpu0/stats
entries: 0
[...]
read events: 1
# 5. Reduce the ring buffer
# echo 7 > per_cpu/cpu0/buffer_size_kb
# 6. Now entries became unexpected 1 because actually no entries!!!
# cat per_cpu/cpu0/stats
entries: 1
[...]
read events: 0
To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.
Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Bail early from svm_enable_nmi_window() for SEV-ES guests without trying
to enable single-step of the guest, as single-stepping an SEV-ES guest is
impossible and the guest is responsible for *telling* KVM when it is ready
for an new NMI to be injected.
Functionally, setting TF and RF in svm->vmcb->save.rflags is benign as the
field is ignored by hardware, but it's all kinds of confusing.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-10-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Immediately mark NMIs as unmasked in response to #VMGEXIT(NMI complete)
instead of setting awaiting_iret_completion and waiting until the *next*
VM-Exit to unmask NMIs. The whole point of "NMI complete" is that the
guest is responsible for telling the hypervisor when it's safe to inject
an NMI, i.e. there's no need to wait. And because there's no IRET to
single-step, the next VM-Exit could be a long time coming, i.e. KVM could
incorrectly hold an NMI pending for far longer than what is required and
expected.
Opportunistically fix a stale reference to HF_IRET_MASK.
Fixes: 916b54a768 ("KVM: x86: Move HF_NMI_MASK and HF_IRET_MASK into "struct vcpu_svm"")
Fixes: 4444dfe405 ("KVM: SVM: Add NMI support for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-9-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable #DB for SEV-ES guests when DebugSwap is enabled. There is no point
in such intercept as KVM does not allow guest debug for SEV-ES guests.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-8-aik@amd.com
[sean: add comment as to why KVM disables #DB intercept iff DebugSwap=1]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for "DebugSwap for SEV-ES guests", which provides support
for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e.
allows KVM to expose debug capabilities to SEV-ES guests. Without
DebugSwap support, the CPU doesn't save/load most _guest_ debug
registers (except DR6/7), and KVM cannot manually context switch guest
DRs due the VMSA being encrypted.
Enable DebugSwap if and only if the CPU also supports NoNestedDataBp,
which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when
vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS
the host by putting the CPU into an infinite loop of vectoring #DBs
(see https://bugzilla.redhat.com/show_bug.cgi?id=1278496)
Set the features bit in sev_es_sync_vmsa() which is the last point
when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most
init happens) is called not only when VCPU is initialised but also on
intrahost migration when VMSA is encrypted.
Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting
DR7 would completely defeat the purpose of enabling DebugSwap.
Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to
let the operator know if the VM can debug.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb()
and tries keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is DR intercepts which is for SEV-ES before sev_es_init_vmcb() runs.
Move the SEV-ES intercept setup to sev_es_init_vmcb(). From now on
set_dr_intercepts()/clr_dr_intercepts() handle SVM/SEV only.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-6-aik@amd.com
[sean: drop comment about intercepting DR7]
Signed-off-by: Sean Christopherson <seanjc@google.com>
SVM/SEV enable debug registers intercepts to skip swapping DRs
on entering/exiting the guest. When the guest is in control of
debug registers (vcpu->guest_debug == 0), there is an optimisation to
reduce the number of context switches: intercepts are cleared and
the KVM_DEBUGREG_WONT_EXIT flag is set to tell KVM to do swapping
on guest enter/exit.
The same code also executes for SEV-ES, however it has no effect as
- it always takes (vcpu->guest_debug == 0) branch;
- KVM_DEBUGREG_WONT_EXIT is set but DR7 intercept is not cleared;
- vcpu_enter_guest() writes DRs but VMRUN for SEV-ES swaps them
with the values from _encrypted_ VMSA.
Be explicit about SEV-ES not supporting debug:
- return right away from dr_interception() and skip unnecessary processing;
- return an error right away from the KVM_SEV_LAUNCH_UPDATE_VMSA handler
if debugging was already enabled.
KVM_SET_GUEST_DEBUG are failing already after KVM_SEV_LAUNCH_UPDATE_VMSA
is finished due to vcpu->arch.guest_state_protected set to true.
Add WARN_ON to kvm_x86::sync_dirty_debug_regs() (saves guest DRs on
guest exit) to signify that SEV-ES won't hit that path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-5-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rewrite the comment(s) in sev_es_prepare_switch_to_guest() to explain the
swap types employed by the CPU for SEV-ES guests, i.e. to explain why KVM
needs to save a seemingly random subset of host state, and to provide a
decoder for the APM's Type-A/B/C terminology.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-4-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently SVM setup is done sequentially in
init_vmcb() -> sev_init_vmcb() -> sev_es_init_vmcb() and tries
keeping SVM/SEV/SEV-ES bits separated. One of the exceptions
is #GP intercept which init_vmcb() skips setting for SEV guests and
then sev_es_init_vmcb() needlessly clears it.
Remove the SEV check from init_vmcb(). Clear the #GP intercept in
sev_init_vmcb(). SEV-ES will use the SEV setting.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-3-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Static functions set_dr_intercepts() and clr_dr_intercepts() are only
called from SVM so move them to .c.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-2-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The pointer data is being incremented but this change to the pointer
is not used afterwards. The increment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20230726164522.369206-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d58ac0bf8d ("perf build: Add clang and llvm compile and
linking support") added -Wall and -Wno-strict-aliasing for CXXFLAGS,
but not -Wextra. -Wno-strict-aliasing is no longer necessary, adding
-Wextra for CXXFLAGS requires adding -Wno-unused-parameter clang.cpp
and clang-test.cpp for LIBCLANGLLVM=1 to build.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230728064917.767761-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 6a40cd90f5 ("perf tools: Add libunwind dependency for DWARF
CFI unwinding") added libunwind support but also -funwind-tables and
-ggdb3 to the standard build. These build flags aren't necessary so
remove, set -g when DEBUG is enabled for the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230728064917.767761-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added during the progress to libbpf 1.0 the deprecated functions are
no longer used and so the pragma can be removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230728064917.767761-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Defconfig doesn't give full coverage for a perf test run, so these can
be merged with defconfig to do so. It's not complete yet, but is a
starting point as a place to add to when a specific test needs something
extra to run.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aishwarya.TCV@arm.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230628105303.4053478-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stack has been created for storing func and dso from the callchain.
The sample has been added to a specific thread. It first checks if the
thread exists in the Thread class. Then it call _add_sample function
which is responsible for appending a new entry to the samples list.
Also callchain parsing and storing part is implemented. Moreover removed
the comment from thread.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/5a112be85ccdcdcd611e343f6a7a7482d01f6299.1689961706.git.anupnewsmail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The intern_stack function is responsible for retrieving
or creating a stack_id based on the provided frame_id and prefix_id.
It first generates a key using the frame_id and prefix_id values.
If the stack corresponding to the key is found in the stackMap,
it is returned. Otherwise, a new stack is created by appending
the prefix_id and frame_id to the stackTable. The key
and the index of the newly created stack are added to the
stackMap for future reference.
The _intern_frame function is responsible for retrieving or
creating a frame_id based on the provided frame string. If the frame_id
corresponding to the frameString is found in the frameMap, it is
returned. Otherwise, a new frame is created by appending relevant
information to the frameTable and adding the frameString to the string_id
through _intern_string.
The _intern_string function will gets a matching string, or saves the new
string and returns a String ID.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Link: https://lore.kernel.org/r/4442f4b1ab4c7317cf940560a3a285fcdfbeeb08.1689961706.git.anupnewsmail@gmail.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The final output will now be presented in JSON format following the Gecko
profile structure. Additionally, the inclusion of PRODUCT allows easy retrieval
of header information for UI.
Furthermore, CATEGORIES have been introduced to enable customization of
kernel and user colors using input arguments. To facilitate this functionality,
an argparse-based parser has been implemented.
Note: The implementation of threads will be addressed in subsequent commits
for now I have commented it out.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa6d027e4134c48e8a2ea45dd8f6b21e6a3418e4.1689961706.git.anupnewsmail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit introduces new classes and conversion functions to
facilitate the representation of Gecko profile information. The new
classes Frame, Stack, Sample, and Thread are added to handle specific
components of the profile data, also link to the origin docs has been
commented out.
Additionally, Inside the Thread class _to_json_dict() method has been
created that converts the current thread data into the corresponding
format expected by the GeckoThread JSON schema, as per the Gecko
profile format specification.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ab7b40bd32df7101a6f8b4a3aa41570b63b831ac.1689961706.git.anupnewsmail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
