This allows to drop the platform_driver's remove function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Marc Kleine-Budde <mkl@pengutronix.de> says:
Traditionally USB drivers used netif_rx to pass the received CAN
frames/skbs to the network stack. In netif_rx() the skbs are queued to
the local CPU. If IRQs are handled in round robin, CAN frames may be
delivered out-of-order to user space.
To support devices without timestamping the TX path of the rx-offload
helper is cleaned up and extended:
- rename rx_offload_get_echo_skb() ->
can_rx_offload_get_echo_skb_queue_timestamp()
- add can_rx_offload_get_echo_skb_queue_tail()
The last patch converts the gs_usb driver to NAPI with the rx-offload
helper.
Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-0-716e542d14d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver used to pass received CAN frames/skbs to the network stack
with netif_rx(). In netif_rx() the skbs are queued to the local CPU.
If IRQs are handled in round robin, OoO packets may occur.
To avoid out-of-order reception convert the driver from netif_rx() to
NAPI.
For USB devices with timestamping support use the rx-offload helper
can_rx_offload_queue_timestamp() for the RX, and
can_rx_offload_get_echo_skb_queue_timestamp() for the TX path. Devices
without timestamping support use can_rx_offload_queue_tail() for RX,
and can_rx_offload_get_echo_skb_queue_tail() for the TX path.
Link: https://lore.kernel.org/all/559D628C.5020100@hartkopp.net
Link: https://github.com/candle-usb/candleLight_fw/issues/166
Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-3-716e542d14d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename the rx_offload_get_echo_skb() function to
can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the
echo skb into the rx-offload queue sorted by timestamp.
This is a preparation for adding
can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to
the end of the queue. This is intended for devices that do not support
timestamps.
Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde <mkl@pengutronix.de> says:
This is a cleanup series of the gs_usb driver. Align the driver more
to the kernel coding style, make use of locally defined variables,
clean up printouts in various error paths, remove some not needed
usb_kill_anchored_urbs() from the shut down paths.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-0-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In gs_usb_disconnect(), all channels are destroyed first, then all
anchored RX URBs (parent->rx_submitted) are disposed with
usb_kill_anchored_urbs().
The call to usb_kill_anchored_urbs() is not needed, as
gs_destroy_candev() of the last active channel already disposes the RX
URBS.
Remove not needed call to usb_kill_anchored_urbs() from
gs_usb_disconnect().
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-11-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In gs_destroy_candev(), the netdev is unregistered first, then all
anchored TX URBs (dev->tx_submitted) are disposed with
usb_kill_anchored_urbs().
The call to usb_kill_anchored_urbs() is not needed, as
unregister_candev() calls gs_can_close(), which already disposes the
TX URBS.
Remove not needed call to usb_kill_anchored_urbs() from
gs_destroy_candev().
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-10-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When the USB device is unplugged, gs_can_close() (which implements the
struct net_device_ops::ndo_stop callback) is called. In this function
an attempt is made to shut down the USB device with a USB control
message. For disconnected devices this will fail and a warning message
is printed.
Silence the driver by removing the printout of the error message if
the reset command fails.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-9-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
pwmchip_add() calls of_pwmchip_add() only after adding the chip to
pwm_chips and releasing pwm_lock. So the proper order in
pwmchip_remove() is to call of_pwmchip_remove() before taking the mutex
and removing the chip from pwm_chips. This way pwmchip_remove() releases
the resources in reverse order compared to pwmchip_add() requesting
them.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Compared to overwriting pdev->dev.of_node directly, this takes care of
reference counting. It also prevents that the parent device matches this
driver. See commit 9b22c17a3c ("of: Check 'of_node_reused' flag on
of_match_device()") for further details.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.dev is assigned in .probe() and never read. So it serves no purpose and
can be removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Apart from the return type pxa_pwm_get_id_dt() reimplements
of_device_get_match_data(). Drop the former and replace the call to it
by the latter.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
struct atmel_tcb_pwm_device::polarity is only used in atmel_tcb_pwm_enable
and atmel_tcb_pwm_disable(). These functions are only called by
atmel_tcb_pwm_apply() after the member variable was assigned to
state->polarity. So the value assigned in atmel_tcb_pwm_request() is
never used and the member can be dropped from struct atmel_tcb_pwm_device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
atmel_tcb_pwm_set_polarity() is only called once and effectively wraps
an assignment only. Replace the function call by the respective
assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies the code, reduces the number of memory allocations and
pointer dereferences.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Several resources were not freed in the error path and the remove
function. Add the forgotten items.
Fixes: 34cbcd7258 ("pwm: atmel-tcb: Add sama5d2 support")
Fixes: 061f8572a3 ("pwm: atmel-tcb: Switch to new binding")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
core.c doens't use any of the symbols provided by linux/radix-tree.h
and compiles just fine without this include. So drop the #include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Fix the below build warning:
warning: Function parameter or member 'num_channel_ios' not described
in 'rz_mtu3_channel_io_map'
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwmchip_remove() returns void since some time but the documentation still
mentions the situations where it used to return an error code. Just remove
this old and now wrong text.
Fixes: 8083f58d08 ("pwm: Make pwmchip_remove() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Remove unnecessary "out of memory" message from the error path of
gs_can_start_xmit() and gs_can_open().
Convert the printout in case of a failing usb_submit_urb() in
gs_can_open() from numbers to human readable error codes.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-8-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In case of an RX overflow error from the CAN controller and an OOM
where no skb can be allocated, the error counters are not incremented.
Fix this by first incrementing the error counters and then allocate
the skb.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230724211841.805053-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
John Watts <contact@jookia.org> says:
This patch series adds support for the Allwinner D1 CAN controllers.
It requires adding a new device tree compatible and driver support to
work around some hardware quirks.
This has been tested on the Mango Pi MQ Dual running a T113 and a
Lichee Panel 86 running a D1.
Changes in v2:
- Re-ordered patches to work with bisecting
- Fixed device tree label underscores
- Fixed email headers
- Link to v1: https://lore.kernel.org/all/20230715112523.2533742-1-contact@jookia.org
Link: https://lore.kernel.org/all/20230721221552.1973203-2-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.
Fixes: 9ef34630a4 ("powerpc/mm: Fallback to RAM if the altmap is unusable")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
Remove unused/legacy peak_usb_netif_rx() function (not longer used
since commit 28e0a70ced ("can: peak_usb: CANFD: store 64-bits hw
timestamps").
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Link: https://lore.kernel.org/all/20230721180758.26199-1-ps.report@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-6-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Allwinner D1's CAN controllers have the ACPC and ACPM registers
moved down. Compensate for this by adding an offset quirk for the
acceptance registers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-5-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Allwinner D1, T113 provide two CAN controllers that are variants
of the R40 controller.
I have tested support for these controllers on two boards:
- A Lichee Panel RV 86 Panel running a D1 chip
- A Mango Pi MQ Dual running a T113-s3 chip
Both of these fully support both CAN controllers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-4-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Allwinner D1 has two CAN controllers, both a variant of the R40
controller. Unfortunately the registers for the D1 controllers are
moved around enough to be incompatible and require a new compatible.
Introduce the "allwinner,sun20i-d1-can" compatible to support this.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-3-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.
Fixes: 81bee6953b ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: Zeyan Li <qaz6750@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Halaney says:
====================
net: stmmac: Increase clk_ptp_ref rate
This series aims to increase the clk_ptp_ref rate to get the best
possible PTP timestamping resolution possible. Some modified disclosure
about my development/testing process from the RFC/RFT v1 follows.
Disclosure: I don't know much about PTP beyond what you can google in an
afternoon, don't have access to documentation about the stmmac IP,
and have only tested that (based on code comments and git commit
history) the programming of the subsecond register (and the clock rate)
makes more sense with these changes. Qualcomm has tested a similar
change offlist, verifying PTP more formally as I understand it.
The last version was an RFC/RFT, but I didn't get a lot of confirmation
that doing patch 3 in that series (essentially setting clk_ptp_ref to
whatever its max value is) for the whole stmmac ecosystem was a safe
idea. So I am erring on the side of caution and doing this for the
Qualcomm platform only. See v1 for an approach that would apply to
all stmmac platform drivers with clk_ptp_ref.
v1: https://lore.kernel.org/netdev/20230711205732.364954-1-ahalaney@redhat.com/
====================
Link: https://lore.kernel.org/r/20230725211853.895832-2-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qualcomm clocks can set their frequency to a variety of levels
generally. Let's use the max for clk_ptp_ref to ensure the best
timestamping resolution possible.
Without this, the default value of the clock is used. For sa8775p-ride
this is 19.2 MHz, far less than the 230.4 MHz possible.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230725211853.895832-4-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The priv variable is _always_ of type (struct stmmac_priv *), so let's
stop using (void *) since it isn't abstracting anything.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230725211853.895832-3-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A7 seems to have external pull-up for the SD card chip detect (like
most MSM8916/MSM8939 devices) so drop the internal pull-up. It's not
necessary.
Tested-by: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230723-a7sdc2cdnopull-v1-1-699fd730afcb@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
