struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When capturing 1600x900, system could crash when system memory usage is
tight.
The way to reproduce this issue:
1. Use 1600x900 to display on host
2. Mount ISO through 'Virtual media' on OpenBMC's web
3. Run script as below on host to do sha continuously
#!/bin/bash
while [ [1] ];
do
find /media -type f -printf '"%h/%f"\n' | xargs sha256sum
done
4. Open KVM on OpenBMC's web
The size of macro block captured is 8x8. Therefore, we should make sure
the height of src-buf is 8 aligned to fix this issue.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct i2c_driver::probe_new() is about to go away. Since I converted
all drivers below drivers/media use struct i2c_driver::probe, three more
drivers were added in the following commits that use .probe_new():
commit 6363db1c9d ("media: i2c: add DS90UB953 driver")
commit c158d0d4ff ("media: i2c: add DS90UB913 driver")
commit afe267f2d3 ("media: i2c: add DS90UB960 driver")
Switch these driver to use the probe callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use proper commit description style]
Smatch warns:
drivers/media/i2c/ds90ub960.c:1671 ub960_rxport_add_serializer():
err: 'rxport->ser.client' dereferencing possible ERR_PTR()
i2c_new_client_device() returns error pointers on failure and in
dev_dbg statement we are dereferencing error pointer which is a bug.
Fix this by using IS_ERR() which checks for error pointers.
Fixes: afe267f2d3 ("media: i2c: add DS90UB960 driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove .owner field if calls are used which set it automatically.
to silence the warning:
./drivers/media/i2c/ds90ub953.c:1390:3-8: No need to set .owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5902
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If opera1_xilinx_rw fails, the mac address is not initialized.
And opera1_read_mac_address does not handle this failure, which leads to
the uninit-value in dvb_usb_adapter_dvb_init.
Fix this by handling the failure of opera1_xilinx_rw.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +]
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9005_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb4
("[media] dw2102: limit messages to buffer size")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: retained the line wrap]
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() and
devm_platform_ioremap_resource_byname() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a spelling mistake in a fmdbg message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: split overly long line over two lines]
source.codeaurora.org is no longer accessible and so the reference links
in the documentation are not useful. The content was mirrored over to
Code Linaro so lets update the references to point there instead.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If cx24120_message_send() returns error, we should keep local struct
unchanged.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5afc9a25be ("[media] Add support for TechniSat Skystar S2")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use put_device to release the object get through of_find_device_by_node,
avoiding resource leaks.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'read' is freed when it is known to be NULL, but not when a read error
occurs.
Revert the logic to avoid a small leak, should a m920x_read() call fail.
Fixes: a2ab06d7c4 ("media: m920x: don't use stack on USB reads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add the error code of a failed i2c transfer to the error message.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Variable loopdiv can be assigned 0, then it is used as a denominator,
without checking it for 0.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 713d54a8bd ("[media] DiB7090: add support for the dib7090 based")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: (bw != NULL) -> bw]
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The previous commit 4b208f8b56 ("[media] siano: register media controller
earlier")moves siano_media_device_register before smscore_register_device,
and adds corresponding error handling code if smscore_register_device
fails. However, it misses the following error handling code of
smsusb_init_device.
Fix this by moving error handling code at the end of smsusb_init_device
and adding a goto statement in the following error handling parts.
Fixes: 4b208f8b56 ("[media] siano: register media controller earlier")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There are two "ret" variables declared in this function so setting
"ret = -EBUSY;" sets the wrong one. The function ends up returning an
uninitialized variable.
Fixes: f098f9b804 ("drm/etnaviv: move runtime PM handling to events")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
User feedback indicates significant performance gains are possible in
specific games with non default RPS up/down thresholds.
Expose these tunables via sysfs which will allow users to achieve best
performance when running games and best power efficiency elsewhere.
Note this patch supports non GuC based platforms only.
v2:
* Make checkpatch happy.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8389
Cc: Rodrigo Vivi <rodrigo.vivi@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717164013.826614-4-tvrtko.ursulin@linux.intel.com
Matthieu Baerts says:
====================
selftests: mptcp: format subtests results in TAP
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CI executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
Regarding this patch set:
- The two first patches modify connect and userspace_pm selftests to
continue executing other tests if there is an error before the end.
This is what is done in the other MPTCP selftests.
- Patches 3-5 are refactoring the code in userspace_pm selftest to
reduce duplicated code, suppress some shellcheck warnings and prepare
subtests' support by using new helpers.
- Patch 6 adds new helpers in mptcp_lib.sh to easily support printing
the subtests results in the different MPTCP selftests.
- Patch 7-13 format subtests results in TAP 13 in the different MPTCP
selftests.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in userspace_pm.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_sockopt.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in simult_flows.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in diag.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_join.sh selftest.
In this selftest and before starting each subtest, the 'reset' function
is called. We can then check if the previous test has passed, failed or
has been skipped from there.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
