Two entries are expected for PCIe ranges.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT bindings expect function in each pin state in the pin configuration:
sm8250-sony-xperia-edo-pdx203.dtb: pinctrl@f100000: cam-pwr-b-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit c4a48b0df8 ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore:
sc8180x-primus.dtb: pinctrl@3100000: hall-int-active-state: 'oneOf' conditional failed, one must be fixed:
'bias-disable', 'function', 'input-enable', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' was expected
'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imxrt1050-lpuart' was expected
'fsl,imx8ulp-lpuart' was expected
'fsl,imx8qxp-lpuart' was expected
'fsl,imxrt1170-lpuart' was expected
From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add reserved memory node for rpmsg
Enable CM33 node with mailbox property included for doorbell.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8ULP relies remoteproc and rpmsg enabled to communicate with CM33
for boot purpose, because some boot related things are handled by
CM33.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
scl-gpios and sda-gpios need GPIO_OPEN_DRAIN flag, otherwise the
following run-time warning is seen:
gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kontron sl28 board is supported upstream and also tested in the
KernelCI. Enable support for its VPD EEPROM where the base ethernet
address is stored.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | | +2 | | | +2 |
| enetc #3 | | +3 | | | +3 |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set Pull Resistors Enable bit to put signal into a defined state.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mm development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plugging.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling. btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case. Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.
Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f6937 ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[REGRESSION]
Commit 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") changed the behavior of scrub_rbio().
Initially if we have no error reading the raid bio, we will assign
@need_check to true, then finish_parity_scrub() would later verify the
content of P/Q stripes before writeback.
But after that commit we never verify the content of P/Q stripes and
just writeback them.
This can lead to unrepaired P/Q stripes during scrub, or already
corrupted P/Q copied to the dev-replace target.
[FIX]
The situation is more complex than the regression, in fact the initial
behavior is not 100% correct either.
If we have the following rare case, it can still lead to the same
problem using the old behavior:
0 16K 32K 48K 64K
Data 1: |IIIIIII| |
Data 2: | |
Parity: | |CCCCCCC| |
Where "I" means IO error, "C" means corruption.
In the above case, we're scrubbing the parity stripe, then read out all
the contents of Data 1, Data 2, Parity stripes.
But found IO error in Data 1, which leads to rebuild using Data 2 and
Parity and got the correct data.
In that case, we would not verify if the Parity is correct for range
[16K, 32K).
So here we have to always verify the content of Parity no matter if we
did recovery or not.
This patch would remove the @need_check parameter of
finish_parity_scrub() completely, and would always do the P/Q
verification before writeback.
Fixes: 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running delayed iputs, which never happens in an irq context, needs to
lock the spinlock fs_info->delayed_iput_lock. When finishing bios for
data writes (irq context, bio.c) we call btrfs_put_ordered_extent() which
needs to add a delayed iput and for that it needs to acquire the spinlock
fs_info->delayed_iput_lock. Without disabling irqs when running delayed
iputs we can therefore deadlock on that spinlock. The same deadlock can
also happen when adding an inode to the delayed iputs list, since this
can be done outside an irq context as well.
Syzbot recently reported this, which results in the following trace:
================================
WARNING: inconsistent lock state
6.4.0-syzkaller-09904-ga507db1d8fdc #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btrfs-cleaner/16079 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
{IN-SOFTIRQ-W} state was registered at:
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_add_delayed_iput+0x128/0x390 fs/btrfs/inode.c:3490
btrfs_put_ordered_extent fs/btrfs/ordered-data.c:559 [inline]
btrfs_put_ordered_extent+0x2f6/0x610 fs/btrfs/ordered-data.c:547
__btrfs_bio_end_io fs/btrfs/bio.c:118 [inline]
__btrfs_bio_end_io+0x136/0x180 fs/btrfs/bio.c:112
btrfs_orig_bbio_end_io+0x86/0x2b0 fs/btrfs/bio.c:163
btrfs_simple_end_io+0x105/0x380 fs/btrfs/bio.c:378
bio_endio+0x589/0x690 block/bio.c:1617
req_bio_endio block/blk-mq.c:766 [inline]
blk_update_request+0x5c5/0x1620 block/blk-mq.c:911
blk_mq_end_request+0x59/0x680 block/blk-mq.c:1032
lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
blk_complete_reqs+0xb3/0xf0 block/blk-mq.c:1110
__do_softirq+0x1d4/0x905 kernel/softirq.c:553
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
irq event stamp: 39
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] __do_kmem_cache_free mm/slab.c:3558 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free+0x244/0x370 mm/slab.c:3575
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] __do_kmem_cache_free mm/slab.c:3553 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free+0x1de/0x370 mm/slab.c:3575
softirqs last enabled at (0): [<ffffffff814ac99f>] copy_process+0x227f/0x75c0 kernel/fork.c:2448
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->delayed_iput_lock);
<Interrupt>
lock(&fs_info->delayed_iput_lock);
*** DEADLOCK ***
1 lock held by btrfs-cleaner/16079:
#0: ffff888107804860 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x103/0x4b0 fs/btrfs/disk-io.c:1463
stack backtrace:
CPU: 3 PID: 16079 Comm: btrfs-cleaner Not tainted 6.4.0-syzkaller-09904-ga507db1d8fdc #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_usage_bug kernel/locking/lockdep.c:3978 [inline]
valid_state kernel/locking/lockdep.c:4020 [inline]
mark_lock_irq kernel/locking/lockdep.c:4223 [inline]
mark_lock.part.0+0x1102/0x1960 kernel/locking/lockdep.c:4685
mark_lock kernel/locking/lockdep.c:4649 [inline]
mark_usage kernel/locking/lockdep.c:4598 [inline]
__lock_acquire+0x8e4/0x5e20 kernel/locking/lockdep.c:5098
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
cleaner_kthread+0x2e5/0x4b0 fs/btrfs/disk-io.c:1478
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
So fix this by using spin_lock_irq() and spin_unlock_irq() when running
delayed iputs, and using spin_lock_irqsave() and spin_unlock_irqrestore()
when adding a delayed iput().
Reported-by: syzbot+da501a04be5ff533b102@syzkaller.appspotmail.com
Fixes: ec63b84d46 ("btrfs: add an ordered_extent pointer to struct btrfs_bio")
Link: https://lore.kernel.org/linux-btrfs/000000000000d5c89a05ffbd39dd@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns
an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the
inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body
of the following if statement:
if (ret == -ENOENT || inode->i_nlink) {
(...)
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
iput(inode);
goto out;
}
(...)
ret = btrfs_del_orphan_item(trans, root,
found_key.objectid);
btrfs_end_transaction(trans);
if (ret) {
iput(inode);
goto out;
}
continue;
}
If we get an error from btrfs_start_transaction() or from the call to
btrfs_del_orphan_item() we end calling iput() against an inode pointer
that has a value of ERR_PTR(-ENOENT), resulting in a crash with the
following trace:
[876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096
[876.667] #PF: supervisor read access in kernel mode
[876.667] #PF: error_code(0x0000) - not-present page
[876.667] PGD 0 P4D 0
[876.668] Oops: 0000 [#1] PREEMPT SMP PTI
[876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[876.668] RIP: 0010:iput+0xa/0x20
[876.668] Code: ff ff ff 66 (...)
[876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282
[876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000
[876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe
[876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4
[876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0
[876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4
[876.670] FS: 00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000
[876.670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0
[876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[876.672] Call Trace:
[876.744] <TASK>
[876.744] ? __die_body+0x1b/0x60
[876.744] ? page_fault_oops+0x15d/0x450
[876.745] ? __kmem_cache_alloc_node+0x47/0x410
[876.745] ? do_user_addr_fault+0x65/0x8a0
[876.745] ? exc_page_fault+0x74/0x170
[876.746] ? asm_exc_page_fault+0x22/0x30
[876.746] ? iput+0xa/0x20
[876.746] btrfs_orphan_cleanup+0x221/0x330 [btrfs]
[876.746] btrfs_lookup_dentry+0x58f/0x5f0 [btrfs]
[876.747] btrfs_lookup+0xe/0x30 [btrfs]
[876.747] __lookup_slow+0x82/0x130
[876.785] walk_component+0xe5/0x160
[876.786] path_lookupat.isra.0+0x6e/0x150
[876.786] filename_lookup+0xcf/0x1a0
[876.786] ? mod_objcg_state+0xd2/0x360
[876.786] ? obj_cgroup_charge+0xf5/0x110
[876.787] ? should_failslab+0xa/0x20
[876.787] ? kmem_cache_alloc+0x47/0x450
[876.787] vfs_path_lookup+0x51/0x90
[876.788] mount_subtree+0x8d/0x130
[876.788] btrfs_mount+0x149/0x410 [btrfs]
[876.788] ? __kmem_cache_alloc_node+0x47/0x410
[876.788] ? vfs_parse_fs_param+0xc0/0x110
[876.789] legacy_get_tree+0x24/0x50
[876.834] vfs_get_tree+0x22/0xd0
[876.852] path_mount+0x2d8/0x9c0
[876.852] do_mount+0x79/0x90
[876.852] __x64_sys_mount+0x8e/0xd0
[876.853] do_syscall_64+0x38/0x90
[876.899] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[876.958] RIP: 0033:0x7f5fbe50b76a
[876.959] Code: 48 8b 0d a9 (...)
[876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a
[876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0
[876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001
[876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70
[876.960] </TASK>
So fix this by setting 'inode' to NULL whenever we get an error from
btrfs_iget(), and to make the code simpler, stop testing for 'ret' being
-ENOENT to check if we have an inode - instead test for 'inode' being NULL
or not. Having a NULL 'inode' prevents any iput() call from crashing, as
iput() ignores NULL inode pointers. Also, stop testing for a NULL return
value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never
returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT),
and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM).
We also don't need the extra iput() calls on the error branches for the
btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have
already called iput() before, so remove them.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we were able to find the inode, we do an
iput() on the inode, then if btrfs_drop_verity_items() succeeds and then
either btrfs_start_transaction() or btrfs_del_orphan_item() fail, we do
another iput() in the respective error paths, resulting in an extra iput()
on the inode.
Fix this by setting inode to NULL after the first iput(), as iput()
ignores a NULL inode pointer argument.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.
Fixes: 12659251ca ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Property name "phy-3p0-supply" is used instead of "phy-reg_3p0-supply".
Fixes: 9f30b6b1a9 ("ARM: dts: imx: Add basic dtsi file for imx6sll")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Instead of using 0x80000000 explicitly specify the reset defaults for
the pad settings. This way the pad configuration is explicit and so
isn't affected by changes that might have been done in the bootloader.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pstore supports compression using a variety of algorithms exposed by the
crypto API. This uses the deprecated comp (as opposed to scomp/acomp)
API, and so we should stop using that, and either move to the new API,
or switch to a different approach entirely.
Given that we only compress ASCII text in pstore, and considering that
this happens when the system is likely to be in an unstable state, the
flexibility that the complex crypto API provides does not outweigh its
impact on the risk that we might encounter additional problems when
trying to commit the kernel log contents to the pstore backend.
So let's switch [back] to the zlib deflate library API, and remove all
the complexity that really has no place in a low-level diagnostic
facility. Note that, while more modern compression algorithms have been
added to the kernel in recent years, the code size of zlib deflate is
substantially smaller than, e.g., zstd, while its performance in terms
of compression ratio is comparable for ASCII text, and speed is deemed
irrelevant in this context.
Note that this means that compressed pstore records may no longer be
accessible after a kernel upgrade, but this has never been part of the
contract. (The choice of compression algorithm is not stored in the
pstore records either)
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-3-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The worst case compression size used by pstore gives an upper bound for
how much the data might inadvertently *grow* due to encapsulation
overhead if the input is not compressible at all.
Given that pstore records have individual 'compressed' flags, we can
simply store the uncompressed data if compressing it would end up using
more space, making the worst case identical to the uncompressed case.
This means we can just drop all the elaborate logic that reasons about
upper bounds for each individual compression algorithm, and just store
the uncompressed data directly if compression fails for any reason.
Co-developed-by: Kees Cook <keescook@chromium.org>
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-2-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The benchmark is similar to the pipe benchmark. It creates two processes,
one is calling syscalls, and another process is handling them via seccomp
user notifications. It measures the time required to run a specified number
of interations.
$ ./perf bench sched seccomp-notify --sync-mode --loop 1000000
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 2.769 [sec]
2.769629 usecs/op
361059 ops/sec
$ ./perf bench sched seccomp-notify
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 8.571 [sec]
8.571119 usecs/op
116670 ops/sec
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-7-avagin@google.com
Link: https://lore.kernel.org/r/20230630051953.454638-1-avagin@gmail.com
[kees: Added PRIu64 format string]
Signed-off-by: Kees Cook <keescook@chromium.org>
seccomp_unotify allows more privileged processes do actions on behalf
of less privileged processes.
In many cases, the workflow is fully synchronous. It means a target
process triggers a system call and passes controls to a supervisor
process that handles the system call and returns controls to the target
process. In this context, "synchronous" means that only one process is
running and another one is waiting.
There is the WF_CURRENT_CPU flag that is used to advise the scheduler to
move the wakee to the current CPU. For such synchronous workflows, it
makes context switches a few times faster.
Right now, each interaction takes 12µs. With this patch, it takes about
3µs.
This change introduce the SECCOMP_USER_NOTIF_FD_SYNC_WAKE_UP flag that
it used to enable the sync mode.
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-5-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Add complete_on_current_cpu, wake_up_poll_on_current_cpu helpers to wake
up tasks on the current CPU.
These two helpers are useful when the task needs to make a synchronous context
switch to another task. In this context, synchronous means it wakes up the
target task and falls asleep right after that.
One example of such workloads is seccomp user notifies. This mechanism allows
the supervisor process handles system calls on behalf of a target process.
While the supervisor is handling an intercepted system call, the target process
will be blocked in the kernel, waiting for a response to come back.
On-CPU context switches are much faster than regular ones.
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-4-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Add WF_CURRENT_CPU wake flag that advices the scheduler to
move the wakee to the current CPU. This is useful for fast on-CPU
context switching use cases.
In addition, make ttwu external rather than static so that
the flag could be passed to it from outside of sched/core.c.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-3-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The main reason is to use new wake_up helpers that will be added in the
following patches. But here are a few other reasons:
* if we use two different ways, we always need to call them both. This
patch fixes seccomp_notify_recv where we forgot to call wake_up_poll
in the error path.
* If we use one primitive, we can control how many waiters are woken up
for each request. Our goal is to wake up just one that will handle a
request. Right now, wake_up_poll can wake up one waiter and
up(&match->notif->request) can wake up one more.
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-2-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Make it clearer in the one-line description and the verbose description
text that CONFIG_UBSAN_TRAP as currently implemented involves a tradeoff of
much less helpful oops messages in exchange for a smaller kernel image.
(With the additional effect of turning UBSAN warnings into crashes, which
may or may not be desired.)
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20230705215128.486054-1-jannh@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Update lib/cpumask.c and <linux/cpumask.h> to fix all kernel-doc
warnings:
include/linux/cpumask.h:185: warning: Function parameter or member 'srcp1' not described in 'cpumask_first_and'
include/linux/cpumask.h:185: warning: Function parameter or member 'srcp2' not described in 'cpumask_first_and'
include/linux/cpumask.h:185: warning: Excess function parameter 'src1p' description in 'cpumask_first_and'
include/linux/cpumask.h:185: warning: Excess function parameter 'src2p' description in 'cpumask_first_and'
lib/cpumask.c:59: warning: Function parameter or member 'node' not described in 'alloc_cpumask_var_node'
lib/cpumask.c:169: warning: Function parameter or member 'src1p' not described in 'cpumask_any_and_distribute'
lib/cpumask.c:169: warning: Function parameter or member 'src2p' not described in 'cpumask_any_and_distribute'
Fixes: 7b4967c532 ("cpumask: Add alloc_cpumask_var_node()")
Fixes: 839cad5fa5 ("cpumask: fix function description kernel-doc notation")
Fixes: 93ba139ba8 ("cpumask: use find_first_and_bit()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The wm8960 codec is not readable, resulting in a NACK for address 0x3d (8-bit).
This can partially indicate it. For example: wm8962 codec use the same address
but is readable. This additional probe check will help prevent loading the wm8960
module incorrectly on wm8962 hardware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230713222513.1636591-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The maple tree register cache should now be a good replacement for the
rbtree cache in almost all situations, update the Qualcomm CODEC drivers
to use the newer cache.
The "stmmaceth-ocp" reset line on the SoCFPGA stmmac ethernet driver is
the same as the "ahb" reset on a standard stmmac ethernet.
commit ("843f603762 dt-bindings: net: snps,dwmac: Add 'ahb'
reset/reset-name") documented the second reset signal as 'ahb' instead
of 'stmmaceth-ocp'. Change the reset-names of the SoCFPGA DWMAC driver to
'ahb'. In order not to break ABI, we will keep support in thedwmac-socfpga
driver to still make use of "stmmaceth-ocp".
This also fixes the dtbs_check warning:
ethernet@ff802000: reset-names:1: 'ahb' was expected
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: update commit message to further describe the reason for the change
In an error path where the submit is free'd without the job being run,
the hw_fence pointer is simply a kzalloc'd block of memory. In this
case we should just kfree() it, rather than trying to decrement it's
reference count. Fortunately we can tell that this is the case by
checking for a zero refcount, since if the job was run, the submit would
be holding a reference to the hw_fence.
Fixes: f94e6a51e1 ("drm/msm: Pre-allocate hw_fence")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/547088/
