When you run 'make rpm-pkg', the rpmbuild tool builds the kernel in
rpmbuild/BUILD, but $(abs_srctree) and $(abs_objtree) point to the
directory path where make was started, not the kernel is actually
being built. The same applies to 'make snap-pkg'. Fix it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stephen reports warnings when rendering phylink kdocs as HTML:
include/linux/phylink.h:110: ERROR: Unexpected indentation.
include/linux/phylink.h:111: WARNING: Block quote ends without a blank line; unexpected unindent.
include/linux/phylink.h:614: WARNING: Inline literal start-string without end-string.
include/linux/phylink.h:644: WARNING: Inline literal start-string without end-string.
Make phylink_pcs_neg_mode() use a proper list format to fix the first
two warnings.
The last two warnings, AFAICT, come from the use of shorthand like
phylink_mode_*(). Perhaps those should be special-cased at the Sphinx
level.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Link: https://lore.kernel.org/r/20230626214640.3142252-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the mishandling of MSG_DONTWAIT and also reinstates the per-page
checking of the source pages (which might have come from a DIO write by
userspace) by partially reverting the changes to support MSG_SPLICE_PAGES
and doing things a little differently. In messenger_v1:
(1) The ceph_tcp_sendpage() is resurrected and the callers reverted to use
that.
(2) The callers now pass MSG_MORE unconditionally. Previously, they were
passing in MSG_MORE|MSG_SENDPAGE_NOTLAST and then degrading that to
just MSG_MORE on the last call to ->sendpage().
(3) Make ceph_tcp_sendpage() a wrapper around sendmsg() rather than
sendpage(), setting MSG_SPLICE_PAGES if sendpage_ok() returns true on
the page.
In messenger_v2:
(4) Bring back do_try_sendpage() and make the callers use that.
(5) Make do_try_sendpage() use sendmsg() for both cases and set
MSG_SPLICE_PAGES if sendpage_ok() is set.
Fixes: 40a8c17aa7 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage")
Fixes: fa094ccae1 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/CAOi1vP9vjLfk3W+AJFeexC93jqPaPUn2dD_4NrzxwoZTbYfOnw@mail.gmail.com/
Link: https://lore.kernel.org/r/CAOi1vP_Bn918j24S94MuGyn+Gxk212btw7yWeDrRcW1U8pc_BA@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/3101881.1687801973@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/3111635.1687813501@warthog.procyon.org.uk/ # v2
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/3199652.1687873788@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII
if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps"
override exists. The negative error code from phy_get_internal_delay()
does not get overridden with the delay deduced from the phy-mode, and
later gets committed to hardware. Also, the rx_delay gets overridden by
what should have been the tx_delay.
Fixes: dbb050d2bf ("phy: mscc: Add support for RGMII delay configuration")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230627134235.3453358-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall says:
====================
use vmalloc_array and vcalloc
The functions vmalloc_array and vcalloc were introduced in
commit a8749a35c3 ("mm: vmalloc: introduce array allocation functions")
but are not used much yet. This series introduces uses of
these functions, to protect against multiplication overflows.
The changes were done using the following Coccinelle semantic
patch.
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
v2: This series uses vmalloc_array and vcalloc instead of
array_size. It also leaves a multiplication of a constant by a
sizeof as is. Two patches are thus dropped from the series.
====================
Link: https://lore.kernel.org/r/20230627144339.144478-1-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently F_UNLCK with F_OFD_GETLK returns -EINVAL. This patch changes
it such that specifying F_UNLCK returns information only about OFD locks
that are owned by the given file description.
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp2@yandex.ru>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
In nfsd4_encode_fattr(), TIME_CREATE was being written out after all
other times. However, they should be written out in an order that
matches the bit flags in bmval1, which in this case are
#define FATTR4_WORD1_TIME_ACCESS (1UL << 15)
#define FATTR4_WORD1_TIME_CREATE (1UL << 18)
#define FATTR4_WORD1_TIME_DELTA (1UL << 19)
#define FATTR4_WORD1_TIME_METADATA (1UL << 20)
#define FATTR4_WORD1_TIME_MODIFY (1UL << 21)
so TIME_CREATE should come second.
I noticed this on a FreeBSD NFSv4.2 client, which supports creation
times. On this client, file times were weirdly permuted. With this
patch applied on the server, times looked normal on the client.
Fixes: e377a3e698 ("nfsd: Add support for the birth time attribute")
Link: https://unix.stackexchange.com/q/749605/56202
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It is possible that the next available path we failover to, happens to
be frozen (for example if it is during connection establishment). If
the original I/O was set with NOWAIT, this cause the I/O to unnecessarily
fail because the request queue cannot be entered, hence the I/O fails with
EAGAIN.
The NOWAIT restriction that was originally set for the I/O is no longer
relevant or needed because this is the nvme requeue context. Hence we
clear the REQ_NOWAIT flag when failing over I/O.
This fix a simple test case of nvme controller reset during I/O when the
multipath device that has only a single path and I/O fails with "Resource
temporarily unavailable" errno. Note that this reproduces with io_uring
which by default sets IOCB_NOWAIT by default.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Correctly spell "Zeroes" in nvme_cmd_write_zeroes command name.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
broke suspend-to-idle at least on Dell XPS13 9360 and 9380.
The problem is that acpi_ec_dispatch_gpe() must clear the EC GPE,
because the EC GPE handler never runs when the system is in the
suspend-to-idle state and if the EC GPE is not cleared by the suspend-
to-idle loop, it is never cleared at all which leads to a GPE storm.
This causes suspend-to-idle to burn energy instead of saving it which
is potentially dangerous (the affected machines heat up rather badly
when that happens).
Addess this by making acpi_ec_dispatch_gpe() clear the EC GPE as it did
before.
Fixes: 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for generation of interrupts from the device directly to the
VM to the VCPU thus avoiding the overhead on the host CPU.
When supported, the driver will attempt to allocate vectors for each
data virtqueue. If a vector for a virtqueue cannot be provided it will
use the QP mode where notifications go through the driver.
In addition, we add a shutdown callback to make sure allocated
interrupts are released in case of shutdown to allow clean shutdown.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Message-Id: <20230607190007.290505-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing documentation for the vqs_list_lock field of struct virtio_device,
and the validate field of struct virtio_driver.
./scripts/kernel-doc says:
.../virtio.h:131: warning: Function parameter or member 'vqs_list_lock' not described in 'virtio_device'
.../virtio.h:192: warning: Function parameter or member 'validate' not described in 'virtio_driver'
2 warnings as Errors
No functional changes intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230510-virtio-kdoc-v3-1-e2681ed7a425@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add the documentation and Kconfig entry for pds_vdpa driver.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-12-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Register for the pds_core's notification events, primarily to
find out when the FW has been reset so we can pass this on
back up the chain.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-11-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the vDPA device support, where we advertise that we can
support the virtio queues and deal with the configuration work
through the pds_core's adminq.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230519215632.12343-10-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
These are the adminq commands that will be needed for
setting up and using the vDPA device. There are a number
of commands defined in the FW's API, but by making use of
the FW's virtio BAR we only need a few of these commands
for vDPA support.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-9-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prep and use the "modern" virtio bar utilities to get our
virtio config space ready.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-8-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Find the vDPA management information from the DSC in order to
advertise it to the vdpa subsystem.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-7-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new adminq definitions in support for vDPA operations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-6-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pds_core_logical_qtype enum and IFNAMSIZ are not needed
in the common PDS header, only needed when working with the
adminq, so move them to the adminq header.
Note: This patch might conflict with pds_vfio patches that are
in review, depending on which patchset gets pulled first.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-5-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the initial auxiliary driver framework for a new vDPA
device driver, an auxiliary_bus client of the pds_core driver.
The pds_core driver supplies the PCI services for the VF device
and for accessing the adminq in the PF device.
This patch adds the very basics of registering for the auxiliary
device and setting up debugfs entries.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to specify a different DMA mask. This adds a dma_mask
field to struct virtio_pci_modern_device. If defined by the driver,
this mask will be used in a call to dma_set_mask_and_coherent() instead
of the traditional DMA_BIT_MASK(64). This allows limiting the DMA space
on vendor devices with address limitations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to check for a different device id. This adds a function
pointer field to struct virtio_pci_modern_device to specify an override
device id check. If defined by the driver, this function will be called
to check that the PCI device is the vendor's expected device, and will
return the found device id to be stored in mdev->id.device. This allows
vendors with alternative vendor device ids to use this library on their
own device BAR.
Note: A lot of the diff in this is simply indenting the existing code
into an else block.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Improve the size of the virtio_pci_device structure, which is commonly
used to represent a virtio PCI device. A given virtio PCI device can
either of legacy type or modern type, with the
struct virtio_pci_legacy_device occupying 32 bytes and the
struct virtio_pci_modern_device occupying 88 bytes. Make them a union,
thereby save 32 bytes of memory as shown by the pahole tool. This
improvement is particularly beneficial when dealing with numerous
devices, as it helps conserve memory resources.
Before the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
struct virtio_pci_legacy_device ldev; /* 824 32 */
/* --- cacheline 13 boundary (832 bytes) was 24 bytes ago --- */
struct virtio_pci_modern_device mdev; /* 856 88 */
/* XXX last struct has 4 bytes of padding */
[...]
/* size: 1056, cachelines: 17, members: 19 */
[...]
};
After the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
union {
struct virtio_pci_legacy_device ldev; /* 824 32 */
struct virtio_pci_modern_device mdev; /* 824 88 */
}; /* 824 88 */
[...]
/* size: 1024, cachelines: 16, members: 18 */
[...]
};
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230516135446.16266-1-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
"-mfunction-return=thunk -mindirect-branch-register" are only valid
for x86. So introduce compiler operation check to avoid such issues
Fixes: 0d0ed40061 ("tools/virtio: enable to build with retpoline")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20230323040024.3809108-1-peng.fan@oss.nxp.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The referenced patch calls set_vq_affinity without checking if the op is
valid. This patch adds the check.
Fixes: 3dad56823b ("virtio-vdpa: Support interrupt affinity spreading mechanism")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230504135053.2283816-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Feng Liu <feliu@nvidia.com>
The callback sends a resume command to the DPU through
the control mechanism.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230502131048.61134-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20230511175451.282096-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
VIRTIO_CONFIG_S_FAILED indicates the guest driver has given up
the device due to fatal errors. So it is the guest decision,
the vendor driver should not set this status to the device.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-6-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit synchronize irqs of the virtqueues
and config space in the reset routine.
Thus ifcvf_stop() and reset() are refactored as well.
This commit renames ifcvf_stop_hw() to ifcvf_stop()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-5-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than former lazy-initialization mechanism,
now the virtqueue operations and driver_features related
ops access the virtio registers directly to take
immediate actions. So ifcvf_start_datapath() should
retire.
ifcvf_add_status() is retierd because we should not change
device status by a vendor driver's decision, this driver should
only set device status which is from virito drivers
upon vdpa_ops.set_status()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements a new function ifcvf_get_driver_feature()
which read driver_features from virtio registers.
To be less ambiguous, ifcvf_set_features() is renamed to
ifcvf_set_driver_features(), and ifcvf_get_features()
is renamed to ifcvf_get_dev_features() which returns
the provisioned vDPA device features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In this commit, virtqueue operations including:
set_vq_num(), set_vq_address(), set_vq_ready()
and get_vq_ready() access PCI registers directly
to take immediate actions.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While running bpf selftests it's possible to get following fault:
general protection fault, probably for non-canonical address \
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
Call Trace:
<TASK>
fprobe_handler+0xc1/0x270
? __pfx_bpf_testmod_init+0x10/0x10
? __pfx_bpf_testmod_init+0x10/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_testmod_init+0x22/0x80
? do_one_initcall+0x63/0x2e0
? rcu_is_watching+0xd/0x40
? kmalloc_trace+0xaf/0xc0
? do_init_module+0x60/0x250
? __do_sys_finit_module+0xac/0x120
? do_syscall_64+0x37/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
</TASK>
In unregister_fprobe function we can't release fp->rethook while it's
possible there are some of its users still running on another cpu.
Moving rethook_free call after fp->ops is unregistered with
unregister_ftrace_function call.
Link: https://lore.kernel.org/all/20230615115236.3476617-1-jolsa@kernel.org/
Fixes: 5b0ab78998 ("fprobe: Add exit_handler support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add YAML doc for the interrupt controller which is present on Ralink SoCs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230623035901.1514341-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The PCIe 2.0 controllers on RK3588 need one additional clock,
one additional reset line and one for ranges entry.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230616170022.76107-4-sebastian.reichel@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add RmNet support for LARA-R6 01B.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230626125336.3127-1-davide.tronchin.94@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VFP related changes to permit kernel mode NEON in softirq context
resulted in some issues regarding en/disabling of sofirqs from asm code,
and this made it clear that it would be better to handle more of it from
C code.
Given that we already have infrastructure that associates undefined
instruction exceptions with handler code based on value/mask pairs, we
can easily move the dispatch of VFP and NEON instructions to C code once
we reimplement the actual VFP support routine (which reasons about how
to deal with the exception and whether any emulation is needed) in C
code first.
With those out of the way, we can drop the partial decoding logic in asm
that reasons about which ISA is being used by user space, as the
remaining cases are all 32-bit ARM only. This leaves a FPE specific
routine with some iWMMXT logic that is easily duplicated in C as well,
allowing us to move the FPE asm code into the FPE asm source file, and
out of the shared entry code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZGT0cAAKCRAwbglWLn0t
XG+RAP9hQ6tgzs7BFRjfHTqPTxMnMRfs9P5bfE0BFQZV+r38kgD/U6vd7CqIQpDH
Xbpilbvfthb3vQzCnNC+/b4H+Ih8bwU=
=xNtM
-----END PGP SIGNATURE-----
Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable
Refactor VFP support code and reimplement in C
The VFP related changes to permit kernel mode NEON in softirq context
resulted in some issues regarding en/disabling of sofirqs from asm code,
and this made it clear that it would be better to handle more of it from
C code.
Given that we already have infrastructure that associates undefined
instruction exceptions with handler code based on value/mask pairs, we
can easily move the dispatch of VFP and NEON instructions to C code once
we reimplement the actual VFP support routine (which reasons about how
to deal with the exception and whether any emulation is needed) in C
code first.
With those out of the way, we can drop the partial decoding logic in asm
that reasons about which ISA is being used by user space, as the
remaining cases are all 32-bit ARM only. This leaves a FPE specific
routine with some iWMMXT logic that is easily duplicated in C as well,
allowing us to move the FPE asm code into the FPE asm source file, and
out of the shared entry code.
Our MPTCP CI and Stephen got this error:
In file included from builtin-trace.c:907:
trace/beauty/msg_flags.c: In function 'syscall_arg__scnprintf_msg_flags':
trace/beauty/msg_flags.c:28:21: error: 'MSG_SPLICE_PAGES' undeclared (first use in this function)
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
trace/beauty/msg_flags.c:28:21: note: each undeclared identifier is reported only once for each function it appears in
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
The fix is similar to what was done with MSG_FASTOPEN: the new macro is
defined if it is not defined in the system headers.
Fixes: b848b26c66 ("net: Kill MSG_SENDPAGE_NOTLAST")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230626112847.2ef3d422@canb.auug.org.au/
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230626090239.899672-1-matthieu.baerts@tessares.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Detection of the configuration mode and the chipset model are
linked to each other. One uses values from the other; namely the
PCI device revision and the SCU revision. Merge this code into
a single function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-15-tzimmermann@suse.de
Split ast_detect_chip() into three functions and call them one by
one. The new functions detect the transmitter chip and widescreen
support. This will allow for further refactoring.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> # AST2400
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-14-tzimmermann@suse.de
