After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
If the PWM is exported but not enabled, do not call pwm_class_apply_state().
First of all, in this case, period may still be unconfigured and this would
make pwm_class_apply_state() return -EINVAL, and then suspend would fail.
Second, it makes little sense to apply state onto PWM that is not enabled
before suspend.
Failing case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo mem > /sys/power/state
...
pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22
pwm pwmchip4: PM: failed to suspend: error -22
PM: Some devices failed to suspend, or early wake event detected
"
Working case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period
$ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle
$ echo mem > /sys/power/state
...
"
Do not call pwm_class_apply_state() in case the PWM is disabled
to fix this issue.
Fixes: 7fd4edc57b ("pwm: sysfs: Add suspend/resume support")
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: ef2bf4997f ("pwm: Improve args checking in pwm_apply_state()")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
During suspend, all the tpm registers will lose values.
So the 'real_period' value of struct 'imx_tpm_pwm_chip'
should be forced to be zero to force the period update
code can be executed after system resume back.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 738a1cfec2 ("pwm: Add i.MX TPM PWM driver support")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Newer versions of the PWM block use a core clock with external mux,
divider, and gate. These components either don't exist any longer in
the PWM block, or they are bypassed.
To minimize needed changes for supporting the new version, the internal
divider and gate should be handled by CCF too.
I didn't see a good way to split the patch, therefore it's somewhat
bigger. What it does:
- The internal mux is handled by CCF already. Register also internal
divider and gate with CCF, so that we have one representation of the
input clock: [mux] parent of [divider] parent of [gate]
- Now that CCF selects an appropriate mux parent, we don't need the
DT-provided default parent any longer. Accordingly we can also omit
setting the mux parent directly in the driver.
- Instead of manually handling the pre-div divider value, let CCF
set the input clock. Targeted input clock frequency is
0xffff * 1/period for best precision.
- For the "inverted pwm disabled" scenario target an input clock
frequency of ULONG_MAX. This ensures that the remaining low pulses
have minimum length.
I don't have hw with the old PWM block, therefore I couldn't test this
patch. With the not yet included extension for the new PWM block
(channel->clk coming directly from get_clk(external_clk)) I didn't
notice any problem. My system uses PWM for the CPU voltage regulator
and for the SDIO 32kHz clock.
Note: The clock gate in the old PWM block is permanently disabled.
This seems to indicate that it's not used by the new PWM block.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The meson_vclk code from the display driver may change the rate of the
video clock. Therefore better don't use it as pwm mux parent.
After removing this clock from the parent list pwm_gxbb_data and
pwm_g12a_ee_data are the same as pwm_meson8b_data. So we can remove
them.
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
We'll use struct clk_parent_data for mux/div/gate initialization in the
follow-up patches. As a first step switch the mux from using
parent_names to clk_parent_data.
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
period >= duty implies that cnt >= duty_cnt. We verified before
that cnt <= 0xffff, therefore we can omit the check here.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
state->period/duty are of type u64, and if their value is greater than
UINT_MAX, then the cast to uint will cause problems. Fix this by
changing the type of the respective local variables to u64.
Fixes: b79c3670e1 ("pwm: meson: Don't duplicate the polarity internally")
Cc: stable@vger.kernel.org
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
I don't see a reason why we should treat the case lo < hi differently
and return 0 as period and duty_cycle. The current logic was added with
c375bcbaab ("pwm: meson: Read the full hardware state in
meson_pwm_get_state()"), Martin as original author doesn't remember why
it was implemented this way back then.
So let's handle it as normal use case and also remove the optimization
for lo == 0. I think the improved readability is worth it.
Fixes: c375bcbaab ("pwm: meson: Read the full hardware state in meson_pwm_get_state()")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
i.MX8QXP compatible is missing in the list, add it.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM unit on MT7981 uses different register offsets than previous
MediaTek PWM units. Add support for these new offsets and add support
for PWM on MT7981 which has 3 PWM channels, one of them is typically
used for a temperature controlled fan.
While at it, also reorder pwm_mediatek_of_data entries to restore
alphabetic order.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add compatible string for the PWM unit found of the MediaTek MT7981 SoC.
This is in preparation to adding support in the pwm-mediatek.c driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of preparing the clk after it was requested and unpreparing in
.probe()'s error path and .remove(), use devm_clk_get_prepared() which
copes for unpreparing automatically.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use the devm_clk_get_prepared() helper function instead of hand-writing it.
It saves some line of codes.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Simple self-contained function is easier to review.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move all register access code into separate functions and
provide their no-op version for non Octeon platforms.
Later it might be possible to replace them with standard
Linux functions, however datasheets are not publicly available
and I have only one Octeon board to test, so lets stay on safe
side for now.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Power gpio configuration is using Octeon specific code, so
move it to separate function, that can later be guarded
with ifdefs.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use Linux standard bitfield access macros to manipulate
shim register.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use Linux standard bitfield access macros to manipulate
host config register.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Code needs to compile for all platforms in order to move it to
drivers/usb/dwc3. Use Linux standard bitfield access macros
to manipulate control register.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Glue code uses a mix of offset and absolute address register
definition. Define all of them as offsets and use them
consistently.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Recently, A new clock and reset controller driver has been introduced to
the ralink mips target[1]. It provides proper system control and adds more
SoC specific compatible strings. In order to better initialize CPUs, this
patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding
documented compatible strings to the system controller match table.
[1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Zero-length arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace zero-length array with flexible-array
member in struct memmap.
Address the following warning found after building (with GCC-13) mips64
with decstation_64_defconfig:
In function 'rex_setup_memory_region',
inlined from 'prom_meminit' at arch/mips/dec/prom/memory.c:91:3:
arch/mips/dec/prom/memory.c:72:31: error: array subscript i is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
72 | if (bm->bitmap[i] == 0xff)
| ~~~~~~~~~~^~~
In file included from arch/mips/dec/prom/memory.c:16:
./arch/mips/include/asm/dec/prom.h: In function 'prom_meminit':
./arch/mips/include/asm/dec/prom.h:73:23: note: while referencing 'bitmap'
73 | unsigned char bitmap[0];
This helps with the ongoing efforts to globally enable -Warray-bounds.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/323
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 08384e80a7 ("MIPS: DTS: CI20: Fix ACT8600 regulator node
names") caused the VDDCORE power supply (regulated by the ACT8600's
DCDC1 output) to drop from a voltage of 1.2V configured by the
bootloader, to the 1.1V set in the Device Tree.
According to the documentation, the VDDCORE supply should be between
0.99V and 1.21V; both values are therefore within the supported range.
However, VDDCORE being 1.1V results in the CI20 being very unstable,
with corrupted memory, failures to boot, or reboots at random. The
reason might be succint drops of the voltage below the minimum required.
Raising the minimum voltage to 1.125 volts seems to be enough to address
this issue, while still keeping a relatively low core voltage which
helps for power consumption and thermals.
Fixes: 08384e80a7 ("MIPS: DTS: CI20: Fix ACT8600 regulator node names")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clang warns:
drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
309 | return ret;
| ^~~
drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning
285 | int ret, i;
| ^
| = 0
drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
359 | return ret;
| ^~~
drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning
335 | int ret, i;
| ^
| = 0
2 errors generated.
Set ret to the return value of clk_hw_register_fixed_rate() using the
PTR_ERR() macro, which ensures ret is not used uninitialized, clearing
up the warning.
Fixes: 6f3b15586e ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Closes: https://github.com/ClangBuiltLinux/linux/issues/1879
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.
Fixes: a55fa9d0e4 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Smatch Warns:
drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe()
warn: missing unwind goto?
The goto label "fail_runtime" and "fail" will disable qup->pclk,
but here qup->pclk failed to obtain, in order to be consistent,
change the direct return to goto label "fail_dma".
Fixes: 9cedf3b2f0 ("i2c: qup: Add bam dma capabilities")
Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # v4.6+
"regstep" may be deprecated, but it still needs a type.
Fixes: 8ad69f4905 ("dt-bindings: i2c: convert ocores binding to yaml")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The conditional if/then schema has an error as the "enum" values have
"const" in them. Drop the "const".
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230621231012.3816139-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
These have now been demoted to debug and are normally hidden. Drop the
assertions entirely.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_allow() is not needed for ACP child platform devices.
Replace pm_runtime_allow() with pm_runtime_mark_last_busy()
& pm_runtime_set_active() in pm_runtime enable sequence for
ACP child platform drivers.
Signed-off-by: Arun Gopal <arungopal.kondaveeti@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230623214150.4058721-1-arungopal.kondaveeti@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/V2M SoC comes with the Clocked Serial Interface (CSI)
IP, which is a master/slave SPI controller.
This commit adds a driver to support CSI master mode.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-4-fabrizio.castro.jz@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dt-bindings for the CSI IP found inside the RZ/V2M SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-2-fabrizio.castro.jz@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Clang's kernel Control Flow Integrity (kCFI) is a compiler-based
security mitigation that ensures the target of an indirect function call
matches the expected type of the call and trapping if they do not match
exactly. The warning -Wincompatible-function-pointer-types-strict aims
to catch these issues at compile time, which reveals:
drivers/leds/leds-mt6323.c:598:49: error: incompatible function pointer types assigning to 'int (*)(struct led_classdev *, enum led_brightness)' from 'int (struct led_classdev *, unsigned int)' [-Werror,-Wincompatible-function-pointer-types-strict]
598 | leds->led[reg]->cdev.brightness_set_blocking =
| ^
599 | mt6323_wled_set_brightness;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/leds/leds-mt6323.c:600:40: error: incompatible function pointer types assigning to 'enum led_brightness (*)(struct led_classdev *)' from 'unsigned int (struct led_classdev *)' [-Werror,-Wincompatible-function-pointer-types-strict]
600 | leds->led[reg]->cdev.brightness_get =
| ^
601 | mt6323_get_wled_brightness;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
While 'unsigned int' is ABI compatible with 'enum led_brightness' (hence
no warning from -Wincompatible-function-pointer-types) and the callers
of these callbacks use/pass the values as 'unsigned int', the mismatch
between the prototype and the called function will trip kCFI at runtime.
Change the types in the implementations to match the prototypes, clearing
up the warning and avoiding kCFI failures.
Fixes: 9bb0a9e062 ("leds: leds-mt6323: Add support for WLEDs and MT6332")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230622-mt6323-wled-wincompatible-function-pointer-types-strict-v1-1-6ad256f220e8@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Alexandra Winter says:
====================
s390/net: updates 2023-06-10
Please apply the following patch series for s390's ctcm and lcs drivers
to netdev's net-next tree.
Just maintenance patches, no functional changes.
====================
Link: https://lore.kernel.org/r/20230621134921.904217-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This LWN article explains the why scnprintf is preferred over snprintf
in general
https://lwn.net/Articles/69419/
Ie. snprintf() returns what *would* be the resulting length, while
scnprintf() returns the actual length.
Note that ctcm_print_statistics() writes the data into the kernel log
and is therefore not suitable for sysfs_emit(). Observable behavior is
not changed, as there may be dependencies.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following the advice of the Documentation/filesystems/sysfs.rst.
All sysfs related show()-functions should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
