If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.
Fixes: abc599efa6 ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.
Fix that by disabling the softirqs across the TX call.
Fixes: cfbc6c4c5b ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.
There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.
Fixes: 529281bdf0 ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Building the 'htmldocs' target results in the following warning when
processing 'hisi-pmu.rst':
| Documentation/admin-guide/perf/hisi-pmu.rst:107: ERROR: Unexpected indentation.
Fix the warning by converting all of the register bitfield lists into
proper bulleted lists and adjusting the indentation of the wrapping line
accordingly. At the same time, use an enumerated list to describe the
new PMUv2 functions.
Fixes: ea8d1c062a ("docs: perf: Add new description for HiSilicon UC PMU")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSMvxkACgkQSD+KveBX
+j42zQf+NxeAf0VYlNTUuAh/I5Zr4oi97SI/bexjOLvrQmN8+7Z1blKiaXAgCudY
ot3r2ySg3IL2nM/UhCIMd56qkYPJVxNwLOtfe+DYDU0pGXmrh6Fsn/QXNR2DLw/e
tQ/4KYQjC0t6kwfDKmEUOnNLg60E3CNCvodG7u7t75N7gmkR323ZFhTXIw5RRXu0
03UjgJm3y8Mkd7YK8e64UOJksTIJ2tOVZeMAtuNyrDUg2IC9LDlDmumDfsjm9ZBe
RFZQi03szjQLi5gXX6NaDh9eI5+HGclvsoygTDJF2Oe4jVx+vmVjiVhmvDOjFjSC
kT10AJuqwiB4tHqkxoWM0JDwp66zUA==
=/hiQ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2023-06-16
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang's kernel Control Flow Integrity (kCFI) is a compiler-based
security mitigation that ensures the target of an indirect function call
matches the expected type of the call and trapping if they do not match
exactly. The warning -Wincompatible-function-pointer-types-strict aims
to catch these issues at compile time, which reveals:
drivers/hwtracing/coresight/coresight-dummy.c:53:12: error: incompatible function pointer types initializing 'int (*)(struct coresight_device *, struct perf_event *, enum cs_mode)' with an expression of type 'int (struct coresight_device *, struct perf_event *, u32)' (aka 'int (struct coresight_device *, struct perf_event *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
53 | .enable = dummy_source_enable,
| ^~~~~~~~~~~~~~~~~~~
drivers/hwtracing/coresight/coresight-dummy.c:62:12: error: incompatible function pointer types initializing 'int (*)(struct coresight_device *, enum cs_mode, void *)' with an expression of type 'int (struct coresight_device *, u32, void *)' (aka 'int (struct coresight_device *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
62 | .enable = dummy_sink_enable,
| ^~~~~~~~~~~~~~~~~
2 errors generated.
Commit 9fa3682869 ("coresight: Use enum type for cs_mode wherever
possible") updated the type of the mode parameter in the prototype but
this driver was not introduced until commit 9d3ba0b6c0 ("Coresight:
Add coresight dummy driver") and 'int' is ABI compatible with 'enum
cs_mode', so there is no warning from regular
-Wincompatible-function-pointer-types.
Adjust the type of the mode parameter in the callback implementations in
the coresight dummy driver to match the prototype, clearing up the
warning and avoiding kCFI failures at runtime.
Fixes: 9d3ba0b6c0 ("Coresight: Add coresight dummy driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230616-coresight-dummy-fix-kcfi-warnings-v1-1-c55c64f8f0f5@kernel.org
The imx6 PCI host controller suffers from a HW integration bug whereby
the MSI enable bit in the root port MSI capability enables/disables MSIs
interrupts for all downstream components in the PCI tree.
This requires, as implemented in
75cb8d20c1 ("PCI: imx: Enable MSI from downstream components")
that the root port MSI enable bit should be set in order for downstream
PCI devices MSIs to function.
The MSI enable bit programming might be lost during the suspend and
should be re-stored during resume.
Save the MSI control during suspend and restore it in resume.
Link: https://lore.kernel.org/r/1670479534-22154-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The function is only defined if CONFIG_PROC_FS is enabled:
ld.lld: error: undefined symbol: i915_drm_client_fdinfo
>>> referenced by i915_driver.c
>>> drivers/gpu/drm/i915/i915_driver.o:(i915_drm_driver) in archive vmlinux.a
Use the PTR_IF() helper to make the reference NULL otherwise.
Fixes: e894b724c3 ("drm/i915: Use the fdinfo helper")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616093158.3568480-1-arnd@kernel.org
Starting from commit e45f243409 ("firmware: meson_sm:
populate platform devices from sm device tree data") pwrc
is probed successfully and disables unused pwr domains.
By A1 SoC family design, any TEE requires DMA pwr domain
always enabled.
Fixes: b3dde5013e ("soc: amlogic: Add support for Secure power domains controller")
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230610090414.90529-1-avromanov@sberdevices.ru
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y
macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are
always duplicate and turning on -Woverride-init (which is disabled by default)
causes a huge amount of warnings like:
drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init]
1384 | #define DRV_PINGROUP_Y(r) ((r))
| ^
drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y'
1397 | .drv_reg = DRV_PINGROUP_Y(r), \
| ^~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y'
1447 | #define drive_soc_gpio08_pb0 DRV_PINGROUP_ENTRY_Y(0x500c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
...
Remove the intialization that is never used here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
DTS and driver already support pcie_clkreq function for a pin. Add it
to fix dtbs_check warning:
qcom-sdx65-mtp.dtb: pinctrl@f100000: pcie-ep-clkreq-default-state: 'oneOf' conditional failed, one must be fixed:
'bias-disable', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
'pcie_clkreq' is not one of ['blsp_uart1', 'blsp_spi1', ... 'gpio']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230617111809.129232-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because
the MELLANOX_PLATFORM symbol does not exist in the tree:
WARNING: unmet direct dependencies detected for GPIO_MLXBF3
Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
Selected by [y]:
- PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
As it turns out, the pinctlr driver still builds fine without this, so just
remove the select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two global functions in fiq.c that get called from
other files through an extern declaration, but a W=1 build
warns about the header not being included before the definition:
arch/arm/kernel/fiq.c:85:5: error: no previous prototype for 'show_fiq_list' [-Werror=missing-prototypes]
arch/arm/kernel/fiq.c:159:13: error: no previous prototype for 'init_FIQ' [-Werror=missing-prototypes]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The function definition is in a file that does not include the
header with the declaration:
arch/arm/kernel/tcm.c:256:13: error: no previous prototype for 'tcm_init'
Move the declaration to a global header where it can actually be
included.
Fixes: de40614e92 ("ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The __vdso_clock_* functions have no prototype, and the
__eabi_unwind_cpp_pr* functions have a prototype in a header that is
not included before the definition:
arch/arm/vdso/vgettimeofday.c:10:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:16:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:22:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:28:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' [-Werror=missing-prototypes]
arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' [-Werror=missing-prototypes]
Add the prototypes in an appropriate header and ensure that
both are included here.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Two functions defined here need the declaration in a header
to avoid W=1 warnings:
arch/arm/vfp/vfpmodule.c:735:6: error: no previous prototype for 'kernel_neon_begin' [-Werror=missing-prototypes]
arch/arm/vfp/vfpmodule.c:768:6: error: no previous prototype for 'kernel_neon_end' [-Werror=missing-prototypes]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
A number of prototypes are missing for the decompressor, some
of them are in the .c files that contain the callers, but are
invisible at the function definition:
arch/arm/boot/compressed/misc.c:129:17: error: no previous prototype for '__div0' [-Werror=missing-prototypes]
arch/arm/boot/compressed/misc.c:138:1: error: no previous prototype for 'decompress_kernel' [-Werror=missing-prototypes]
arch/arm/boot/compressed/misc.c:163:6: error: no previous prototype for 'fortify_panic' [-Werror=missing-prototypes]
arch/arm/boot/compressed/decompress.c:63:5: error: no previous prototype for 'do_decompress' [-Werror=missing-prototypes]
arch/arm/boot/compressed/fdt_check_mem_start.c:63:10: error: no previous prototype for 'fdt_check_mem_start' [-Werror=missing-prototypes]
Move these all to misc.h so they are visible by the callee as well.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The kernel .data decompression is called from assembler, so it does
not need a prototype, but adding one avoids this W=1 warning:
arch/arm/kernel/head-inflate-data.c:35:12: error: no previous prototype for '__inflate_kernel_data' [-Werror=missing-prototypes]
The same file contains a few extern declarations for assembler
symbols, move those into the header as well for consistency.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
All architecture-independent system calls have prototypes in
include/linux/syscalls.h, but there are a few that only exist
on arm or that take the pt_regs directly. These cause a W=1
warning such as:
arch/arm/kernel/signal.c:186:16: error: no previous prototype for 'sys_sigreturn' [-Werror=missing-prototypes]
arch/arm/kernel/signal.c:216:16: error: no previous prototype for 'sys_rt_sigreturn' [-Werror=missing-prototypes]
arch/arm/kernel/sys_arm.c:32:17: error: no previous prototype for 'sys_arm_fadvise64_64' [-Werror=missing-prototypes]
Add prototypes for all custom syscalls on arm and add them
to asm/syscalls.h.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
A couple of functions are declared in arch/arm/mm/mmu.c rather than in a header,
which causes W=1 build warnings:
arch/arm/mm/init.c:97:13: error: no previous prototype for 'setup_dma_zone' [-Werror=missing-prototypes]
arch/arm/mm/mmu.c:118:13: error: no previous prototype for 'init_default_cache_policy' [-Werror=missing-prototypes]
arch/arm/mm/mmu.c:1195:13: error: no previous prototype for 'adjust_lowmem_bounds' [-Werror=missing-prototypes]
arch/arm/mm/mmu.c:1761:13: error: no previous prototype for 'paging_init' [-Werror=missing-prototypes]
arch/arm/mm/mmu.c:1794:13: error: no previous prototype for 'early_mm_init' [-Werror=missing-prototypes]
Move the declaratsion to asm/setup.h so they can be seen by the compiler
while building the definition.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
setup_mm_for_reboot() is declared in asm/idmap.h but that is not included
for the definition, causing a W=1 warning:
arch/arm/mm/nommu.c:178:6: error: no previous prototype for 'setup_mm_for_reboot' [-Werror=missing-prototypes]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The prototype for __flush_anon_page() is intentionally hidden
inside the flush_anon_page() inline function to prevent it from
being called from drivers.
When building with 'W=1', this causes a warning:
arch/arm/mm/flush.c:358:6: error: no previous prototype for '__flush_anon_page' [-Werror=missing-prototypes]
Work around this by adding a prototype directly next to the function
definition.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The CPU specific helpers have to be global functions when building
a kernel for just one CPU, but are called through indirect function
pointers in a multi-CPU kernel. This config currently lacks the
declarations for the individual helpers, e.g.:
arch/arm/mm/copypage-v4wb.c:47:6: error: no previous prototype for 'v4wb_copy_user_highpage' [-Werror=missing-prototypes]
arch/arm/mm/copypage-v4wb.c:65:6: error: no previous prototype for 'v4wb_clear_user_highpage' [-Werror=missing-prototypes]
Add the complete set of prototypes in asm/page.h to allow
building iwth -Wmissing-prototypes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When building with 'make W=1', the compiler warns about any function
definition that does not come with a prototype in a header, to ensure
it matches what the caller expects.
This includes functions that are only ever caller from assembly
code and don't technically need a declaration:
arch/arm/kernel/ftrace.c:227:6: error: no previous prototype for 'prepare_ftrace_return'
arch/arm/kernel/ptrace.c:850:16: error: no previous prototype for 'syscall_trace_enter'
arch/arm/kernel/ptrace.c:878:17: error: no previous prototype for 'syscall_trace_exit'
arch/arm/kernel/signal.c:601:1: error: no previous prototype for 'do_work_pending'
arch/arm/kernel/signal.c:672:17: error: no previous prototype for 'do_rseq_syscall'
arch/arm/kernel/suspend.c:75:6: error: no previous prototype for '__cpu_suspend_save'
arch/arm/kernel/traps.c:451:17: error: no previous prototype for 'do_undefinstr'
arch/arm/kernel/traps.c:516:39: error: no previous prototype for 'handle_fiq_as_nmi'
arch/arm/kernel/traps.c:535:17: error: no previous prototype for 'bad_mode'
arch/arm/kernel/traps.c:608:16: error: no previous prototype for 'arm_syscall'
arch/arm/kernel/traps.c:734:1: error: no previous prototype for 'baddataabort'
arch/arm/kernel/traps.c:774:17: error: no previous prototype for '__div0'
arch/arm/kernel/traps.c:97:6: error: no previous prototype for 'dump_backtrace_stm'
arch/arm/kernel/unwind.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0'
arch/arm/kernel/unwind.c:45:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1'
arch/arm/kernel/unwind.c:50:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2'
arch/arm/mm/fault.c:554:1: error: no previous prototype for 'do_DataAbort'
arch/arm/mm/fault.c:584:1: error: no previous prototype for 'do_PrefetchAbort'
arch/arm/mm/proc-v7-bugs.c:280:6: error: no previous prototype for 'cpu_v7_ca8_ibe'
arch/arm/mm/proc-v7-bugs.c:293:6: error: no previous prototype for 'cpu_v7_bugs_init'
arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0'
arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1'
arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2'
arch/arm/vfp/vfpmodule.c:323:6: error: no previous prototype for 'VFP_bounce'
Add the prototypes anyway, to allow enabling this warning by default in
the future.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
checker_stack_use_t32strd() and kprobe_handler() can be made static since
they are not used from other files, while coverage_start_registers()
and __kprobes_test_case() are used from assembler code, and just need
a declaration to avoid a warning with the global definition.
arch/arm/probes/kprobes/checkers-common.c:43:18: error: no previous prototype for 'checker_stack_use_t32strd'
arch/arm/probes/kprobes/core.c:236:16: error: no previous prototype for 'kprobe_handler'
arch/arm/probes/kprobes/test-core.c:723:10: error: no previous prototype for 'coverage_start_registers'
arch/arm/probes/kprobes/test-core.c:918:14: error: no previous prototype for '__kprobes_test_case_start'
arch/arm/probes/kprobes/test-core.c:952:14: error: no previous prototype for '__kprobes_test_case_end_16'
arch/arm/probes/kprobes/test-core.c:967:14: error: no previous prototype for '__kprobes_test_case_end_32'
Fixes: 6624cf651f ("ARM: kprobes: collects stack consumption for store instructions")
Fixes: 454f3e132d ("ARM/kprobes: Remove jprobe arm implementation")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
A couple of functions in this file are only used on MMU-enabled
builds, and never even declared otherwise, causing these build
warnings:
arch/arm/kernel/traps.c:759:6: error: no previous prototype for '__pte_error' [-Werror=missing-prototypes]
arch/arm/kernel/traps.c:764:6: error: no previous prototype for '__pmd_error' [-Werror=missing-prototypes]
arch/arm/kernel/traps.c:769:6: error: no previous prototype for '__pgd_error' [-Werror=missing-prototypes]
Protect these in an #ifdef to avoid the warnings and save a little
bit of .text space.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The dma_contiguous_early_fixup() function is a global __weak stub
with an arm specific override, but the declaration is in an #ifdef.
If CONFIG_DMA_CMA is disabled, there is no caller and no prototype,
which adds a warning for the definition:
arm/mm/dma-mapping.c:261:13: error: no previous prototype for 'dma_contiguous_early_fixup' [-Werror=missing-prototypes]
Enclose the definition in the same #ifdef as the prototype to avoid
that and save a few bytes of .init.text.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead to
linear read overflows if a source string is not NUL-terminated [1]. In
an effort to remove strlcpy() completely [2], replace strlcpy() here
with strscpy(). No return values were used, so direct replacement is
safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
[ardb: submitting to the patch tracker on behalf of Azeem]
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The function name clarifies the intention.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
