Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.
Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf2410 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.
While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf2410 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:
$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy
if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.
Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.
This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
fixes for Q-USGMII speeds and autoneg
This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.
As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.
The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.
[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================
Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds
Fixes: 5e61fe157a ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.
Fixes: ae0e4bb2a0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the `Error` type with `errname()` by providing a new
`name()` method.
Then, implement `Debug` for the type using the new method.
[ Miguel: under `CONFIG_SYMBOLIC_ERRNAME=n`, `errname()` is a
`static inline`, so added a helper to support that case,
like we had in the `rust` branch. Also moved `#include` up
and reworded commit message for clarity. ]
Co-developed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230531174450.3733220-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
[BUG]
Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot
mount option on a corrupted fs.
The full report can be found here:
https://syzkaller.appspot.com/bug?extid=c4614eae20a166c25bf0
BTRFS error (device loop0: state C): failed to load root csum
assertion failed: !tmp, in fs/btrfs/disk-io.c:1103
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3664!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663
RSP: 0018:ffffc90003aaf250 EFLAGS: 00010246
RAX: 0000000000000032 RBX: 0000000000000000 RCX: f21c13f886638400
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff888021c640a0 R08: ffffffff816bd38d R09: ffffed10173667f1
R10: ffffed10173667f1 R11: 1ffff110173667f0 R12: dffffc0000000000
R13: ffff8880229c21f7 R14: ffff888021c64060 R15: ffff8880226c0000
FS: 0000555556a73300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2637d7a00 CR3: 00000000709c4000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103
load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467
load_global_roots fs/btrfs/disk-io.c:2501 [inline]
btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline]
init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939
open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574
btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456
btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1530
fc_mount fs/namespace.c:1043 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073
btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884
[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.
So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.
And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().
But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.
So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.
[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.
To make further debugging easier, also add two explicit error messages:
- Error message for conflicting global roots
- Error message when using backup roots slot
Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the arm64_sw.hvhe=1 option to force the use of the hVHE mode
in the hypervisor code only.
This enables the hVHE mode of operation when using KVM on VHE
hardware.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Just like the rest of the timer code, we need to shift the enable
bits around when HCR_EL2.E2H is set, which is the case in hVHE mode.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Just like we repainted the early arm64 code, we need to update
the CPTR_EL2 accesses that are taking place in the nVHE code
when hVHE is used, making them look as if they were CPACR_EL1
accesses. Just like the VHE code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
El2 stage-1 page-table format is subtly (and annoyingly) different
when HCR_EL2.E2H is set.
Take the ARM64_KVM_HVHE configuration into account when setting
the AP bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When using hVHE, we end-up with two TTBRs at EL2. That's great,
but we're not quite ready for this just yet.
Disable TTBR1_EL2 by setting TCR_EL2.EPD1 so that we only
translate via TTBR0_EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Obviously, in order to be able to use VHE whilst at EL2, we need
to set HCR_EL2.E2H. Do so when ARM64_KVM_HVHE is set.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We can now start with the fun stuff: if we enable VHE *only* for
the hypervisor, we need to generate the VHE instructions when
accessing the system registers.
For this, reporpose the alternative sequence to be keyed off
ARM64_KVM_HVHE in the nVHE hypervisor code, and only there.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In the VHE hypervisor code, we should be using the remapped VHE
accessors, no ifs, no buts. No need to generate any alternative.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When HCR_EL2.E2H is set, the CPTR_EL2 register takes the CPACR_EL1
format. Yes, this is good fun.
Hack the bits of startup code that assume E2H=0 while setting up
CPTR_EL2 to make them grok the CPTR_EL1 format.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
To initialise the timer access from EL2 when HCR_EL2.E2H is set,
we must make use the CNTHCTL_EL2 formap used is appropriate.
This amounts to shifting the timer/counter enable bits by 10
to the left.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If the OVERRIDE_HVHE SW override is set (as a precursor of
the KVM_HVHE capability), do not enable VHE for the kernel
and drop to EL1 as if VHE was either disabled or unavailable.
Further changes will enable VHE at EL2 only, with the kernel
still running at EL1.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Expose a capability keying the hVHE feature as well as a new
predicate testing it. Nothing is so far using it, and nothing
is enabling it yet.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Disabling KASLR from the command line is implemented as a feature
override. Repaint it slightly so that it can further be used as
more generic infrastructure for SW override purposes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Using is_kernel_in_hyp_mode() in hypervisor code is a pretty bad
mistake. This helper only checks for CurrentEL being EL2, which
is always true.
Make the compilation fail if using the helper in hypervisor context
Whilst we're at it, flag the helper as __always_inline, which it
really should be.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It is pretty obvious that is_kernel_in_hyp_mode() doesn't make much
sense in the hypervisor part of KVM, and should be reserved to the
kernel side.
However, mem_protect.c::invalidate_icache_guest_page() calls into
__invalidate_icache_guest_page(), which uses is_kernel_in_hyp_mode().
Given that this is part of the pKVM side of the hypervisor, this
helper can only return true.
Nothing goes really bad, but __invalidate_icache_guest_page() could
spell out what the actual check is: we cannot invalidate the cache
if the i-cache is VPIPT and we're running at EL1.
Drop the is_kernel_in_hyp_mode() check for an explicit check against
CurrentEL being EL1 or not.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
introduced during this -rc cycle or which were considered inappropriate
for a backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZIdw7QAKCRDdBJ7gKXxA
jki4AQCygi1UoqVPq4N/NzJbv2GaNDXNmcJIoLvPpp3MYFhucAEAtQNzAYO9z6CT
iLDMosnuh+1KLTaKNGL5iak3NAxnxQw=
=mTdI
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
were introduced during this development cycle or which were considered
inappropriate for a backport"
* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zswap: do not shrink if cgroup may not zswap
page cache: fix page_cache_next/prev_miss off by one
ocfs2: check new file size on fallocate call
mailmap: add entry for John Keeping
mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
epoll: ep_autoremove_wake_function should use list_del_init_careful
mm/gup_test: fix ioctl fail for compat task
nilfs2: reject devices with insufficient block count
ocfs2: fix use-after-free when unmounting read-only filesystem
lib/test_vmalloc.c: avoid garbage in page array
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
riscv/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
x86/purgatory: remove PGO flags
kexec: support purgatories with .text.hot sections
mm/uffd: allow vma to merge as much as possible
mm/uffd: fix vma operation where start addr cuts part of vma
radix-tree: move declarations to header
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
This version addresses issues with core power configuration for
non CPU dies. Also address issue with JSON formatting of output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
sys_reg_desc::{reset, val} are presently unused for ID register
descriptors. Repurpose these fields to support user-configurable ID
registers.
Use the ::reset() function pointer to return the sanitised value of a
given ID register, optionally with KVM-specific feature sanitisation.
Additionally, keep a mask of writable register fields in ::val.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM allows userspace to write an IMPDEF PMU version to the corresponding
32bit and 64bit ID register fields for the sake of backwards
compatibility with kernels that lacked commit 3d0dba5764 ("KVM: arm64:
PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation"). Plumbing
that IMPDEF PMU version through to the gues is getting in the way of
progress, and really doesn't any sense in the first place.
Bite the bullet and reinterpret the IMPDEF PMU version as NI (0) for
userspace writes. Additionally, spill the dirty details into a comment.
Link: https://lore.kernel.org/r/20230609190054.1542113-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
To date KVM has allowed userspace to construct asymmetric VMs where
particular features may only be supported on a subset of vCPUs. This
wasn't really the intened usage pattern, and it is a total pain in the
ass to keep working in the kernel. What's more, this is at odds with CPU
features in host userspace, where asymmetric features are largely hidden
or disabled.
It's time to put an end to the whole game. Require all vCPUs in the VM
to have the same feature set, rejecting deviants in the
KVM_ARM_VCPU_INIT ioctl. Preserve some of the vestiges of per-vCPU
feature flags in case we need to reinstate the old behavior for some
limited configurations. Yes, this is a sign of cowardice around a
user-visibile change.
Hoist all of the 32-bit limitations into kvm_vcpu_init_check_features()
to avoid nested attempts to acquire the config_lock, which won't end
well.
Link: https://lore.kernel.org/r/20230609190054.1542113-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Allow the value of KVM_ARM_VCPU_POWER_OFF to differ between calls to
KVM_ARM_VCPU_INIT. Userspace can already change the state of the vCPU
through the KVM_SET_MP_STATE ioctl, so making the bit invariant seems
needlessly restrictive.
Link: https://lore.kernel.org/r/20230609190054.1542113-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
kvm_vcpu_set_target() iteratively sanitises and copies feature flags in
one go. This is rather odd, especially considering the fact that bitmap
accessors can do the heavy lifting. A subsequent change will make vCPU
features VM-wide, and fitting that into the present implementation is
just a chore.
Rework the whole thing to use bitmap accessors to sanitise and copy
flags.
Link: https://lore.kernel.org/r/20230609190054.1542113-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When core-power configuration or enabled is modified, this is only done
for compute dies. But the config must also be set to cores with no CPUs.
Without this the configuration is not affective.
On displaying config information, allow display for non compute dies
also.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When CONFIG_PNP is disabled, the mchbar_addr variable is only written but
not read:
drivers/gpu/drm/i915/soc/intel_gmch.c: In function 'intel_alloc_mchbar_resource':
drivers/gpu/drm/i915/soc/intel_gmch.c:41:13: error: variable 'mchbar_addr' set but not used [-Werror=unused-but-set-variable]
41 | u64 mchbar_addr;
| ^~~~~~~~~~~
No idea why this showed up now, but it's easy to fix by changing the #ifdef to
an IS_ENABLED() check that the compiler can see through.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612124408.521325-1-arnd@kernel.org
The KTAP parser I used to test the KTAP output for ftracetest was overly
robust and did not notice that the test number and pass/fail result were
reversed. Fix this.
Fixes: dbcf76390e ("selftests/ftrace: Improve integration with kselftest runner")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the the config fragment for cpufreq enables a lot of generic
lock debugging. While these options are useful when testing cpufreq
they aren't actually required to run the tests and are therefore out of
scope for the cpufreq fragement, they are more of a thing that it's good
to enable while doing testing than an actual requirement for cpufreq
testing specifically. Having these debugging options enabled,
especially the mutex and spinlock instrumentation, mean that any build
that includes the cpufreq fragment is both very much larger than a
standard defconfig (eg, I'm seeing 35% on x86_64) and also slower at
runtime.
This is causing real problems for CI systems. In order to avoid
building large numbers of kernels they try to group kselftest fragments
together, frequently just grouping all the kselftest fragments into a
single block. The increased size is an issue for memory constrained
systems and is also problematic for systems with fixed storage
allocations for kernel images (eg, typical u-boot systems) where it
frequently causes the kernel to overflow the storage space allocated for
kernels. The reduced performance isn't too bad with real hardware but
can be disruptive on emulated platforms.
In order to avoid these issues remove these generic instrumentation
options from the cpufreq fragment, bringing the cpufreq fragment into
line with other fragments which generally set requirements for testing
rather than nice to haves.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the collections list is not sorted uniq doesn't weed out duplicate
tests correctly. Make sure to sort it before running uniq.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
An output message:
> # # waitpid WEXITSTATUS=0
will be printed for 30,000+ times in the `pidfd_test` selftest, which
does not seem ideal. This patch removes the print logic in the
`wait_for_pid` function, so each call to this function does not output
a line by default. Any existing call sites where the extra line might
be beneficial have been modified to include extra print statements
outside of the function calls.
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The default timeout for selftests tests is 45 seconds. Although
we already have 13 settings for tests of about 96 sefltests which
use a timeout greater than this, we want to try to avoid encouraging
more tests to forcing a higher test timeout as selftests strives to
run all tests quickly. Selftests also uses the timeout as a non-fatal
error. Only tests runners which have control over a system would know
if to treat a timeout as fatal or not.
To help with all this:
o Enhance documentation to avoid future increases of insane timeouts
o Add the option to allow overriding the default timeout with test
runners with a command line option
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by:Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add new test case kprobe_opt_types.tc which enables and checks
if each probe has been optimized in order to test potential issues with
optimized probes.
The '|| continue' is added with the echo statement to ignore errors that
are caused by trying to add kprobes to non probeable lines and continue
with the test.
Signed-off-by: Akanksha J N <akanksha@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Verify that calling clone3 with an exit signal (SIGCHLD) in flags will
fail.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the unlikely case that CLOCK_REALTIME is not defined, variable ret is
not initialized and further accumulation of return values to ret can leave
ret in an undefined state. Fix this by initialized ret to zero and changing
the assignment of ret to an accumulation for the CLOCK_REALTIME case.
Fixes: 03f55c7952 ("kselftest: Extend vDSO selftest to clock_getres")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is a spelling mistake in an log message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add new subtest to video_device_test to cover the VIDIOC_G_PRIORITY
and VIDIOC_S_PRIORITY ioctl calls. This test tries to set the priority
associated with the file descriptior via ioctl VIDIOC_S_PRIORITY
command from V4L2 API. After that, the test tries to get the new
priority via VIDIOC_G_PRIORITY ioctl command and compares the result
with the v4l2_priority it set before. At the end, the test restores the
old priority.
This test will increase the code coverage for video_device_test, so
I think it might be useful. Additionally, this patch will refactor the
video_device_test a little bit, according to the new functionality.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We recently added the bpf_cpumask_first_and() kfunc, and changed
bpf_cpumask_any() / bpf_cpumask_any_and() to
bpf_cpumask_any_distribute() and bpf_cpumask_any_distribute_and()
respectively. This patch adds an entry for the bpf_cpumask_first_and()
kfunc, and updates the documentation for the *any* kfuncs to the new
names.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a prior patch, we removed the bpf_cpumask_any() and
bpf_cpumask_any_and() kfuncs, and replaced them with
bpf_cpumask_any_distribute() and bpf_cpumask_any_distribute_and().
The advertised semantics between the two kfuncs were identical, with the
former always returning the first CPU, and the latter actually returning
any CPU.
This patch updates the selftests for these kfuncs to use the new names.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We currently export the bpf_cpumask_any() and bpf_cpumask_any_and()
kfuncs. Intuitively, one would expect these to choose any CPU in the
cpumask, but what they actually do is alias to cpumask_first() and
cpmkas_first_and().
This is useless given that we already export bpf_cpumask_first() and
bpf_cpumask_first_and(), so this patch replaces them with kfuncs that
call cpumask_any_distribute() and cpumask_any_and_distribute(), which
actually choose any CPU from the cpumask (or the AND of two cpumasks for
the latter).
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A prior patch added a new kfunc called bpf_cpumask_first_and() which
wraps cpumask_first_and(). This patch adds a selftest to validate its
behavior.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We currently provide bpf_cpumask_first(), bpf_cpumask_any(), and
bpf_cpumask_any_and() kfuncs. bpf_cpumask_any() and
bpf_cpumask_any_and() are confusing misnomers in that they actually just
call cpumask_first() and cpumask_first_and() respectively.
We'll replace them with bpf_cpumask_any_distribute() and
bpf_cpumask_any_distribute_and() kfuncs in a subsequent patch, so let's
ensure feature parity by adding a bpf_cpumask_first_and() kfunc to
account for bpf_cpumask_any_and() being removed.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
