Since 315bada690 ("EDAC: Check for GHES preference in the
chipset-specific EDAC drivers"), vendor specific EDAC driver will not
probe correctly when CONFIG_ACPI_APEI_GHES is enabled but no GHES device
is present. Make ghes_get_devices() return NULL when the GHES device
list is empty to fix the problem.
Fixes: 9057a3f7ac ("EDAC/ghes: Prepare to make ghes_edac a proper module")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The inclusion of linux/arm-smccc.h in acpi_ffh is unnecessary and can
be even termed wrong. It is needed in the arm64 architecture callback
implementation and probably is the leftover from the missed cleanup of
the initial implementation.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zhaoxin CPUs support NONSTOP TSC feature, so do not mark these CPUs
TSC unstable when use the acpi_pad driver.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's only used inside the __init section. Mark it __initdata.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We found a refcount UAF bug as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 342 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x148
Workqueue: events cpuset_hotplug_workfn
Call trace:
refcount_warn_saturate+0xa0/0x148
__refcount_add.constprop.0+0x5c/0x80
css_task_iter_advance_css_set+0xd8/0x210
css_task_iter_advance+0xa8/0x120
css_task_iter_next+0x94/0x158
update_tasks_root_domain+0x58/0x98
rebuild_root_domains+0xa0/0x1b0
rebuild_sched_domains_locked+0x144/0x188
cpuset_hotplug_workfn+0x138/0x5a0
process_one_work+0x1e8/0x448
worker_thread+0x228/0x3e0
kthread+0xe0/0xf0
ret_from_fork+0x10/0x20
then a kernel panic will be triggered as below:
Unable to handle kernel paging request at virtual address 00000000c0000010
Call trace:
cgroup_apply_control_disable+0xa4/0x16c
rebind_subsystems+0x224/0x590
cgroup_destroy_root+0x64/0x2e0
css_free_rwork_fn+0x198/0x2a0
process_one_work+0x1d4/0x4bc
worker_thread+0x158/0x410
kthread+0x108/0x13c
ret_from_fork+0x10/0x18
The race that cause this bug can be shown as below:
(hotplug cpu) | (umount cpuset)
mutex_lock(&cpuset_mutex) | mutex_lock(&cgroup_mutex)
cpuset_hotplug_workfn |
rebuild_root_domains | rebind_subsystems
update_tasks_root_domain | spin_lock_irq(&css_set_lock)
css_task_iter_start | list_move_tail(&cset->e_cset_node[ss->id]
while(css_task_iter_next) | &dcgrp->e_csets[ss->id]);
css_task_iter_end | spin_unlock_irq(&css_set_lock)
mutex_unlock(&cpuset_mutex) | mutex_unlock(&cgroup_mutex)
Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.
To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://www.spinics.net/lists/cgroups/msg37935.html
Suggested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/all/20230526114139.70274-1-xiujianfeng@huaweicloud.com/
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Fixes: 2d8f243a5e ("cgroup: implement cgroup->e_csets[]")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Tejun Heo <tj@kernel.org>
On multiple devices I work on, we noticed that
/sys/firmware/acpi/interrupts/sci_not is non-zero and keeps increasing
over time.
It turns out that there is a race condition between servicing a GPE
interrupt and handling task driven transactions.
If a GPE interrupt is received at the same time ec_poll() is running,
the advance_transaction() clears the GPE flag and the interrupt is not
serviced as acpi_ev_detect_gpe() relies on the GPE flag to call the
handler. As a result, `sci_not' is increased.
To address this, move the GPE status check and clearing from
advance_transaction() directly into acpi_ec_handle_interrupt(), so the
EC GPE only gets cleared in the interrupt handling path.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Consistently use:
PCIe previously PCIe, PCI Express, or pci express
Root Port previously Root Port or root port
Endpoint previously EndPoint or endpoint
AER previously AER or aer
please previously pls
Also update a few awkward wordings.
Link: https://lore.kernel.org/r/20230609222500.1267795-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Change references to *.txt to *.rst to match the current filenames.
Link: https://lore.kernel.org/r/20230609222500.1267795-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is native"),
the PCI core enables PCIe device error reporting for all devices during
enumeration, so drivers don't need to do it.
Remove the recommendation for drivers to configure AER and call
pci_enable_pcie_error_reporting() themselves.
Also remove the suggestion that drivers may change AER mask and severity
registers. Ownership of these registers is negotiated between the OS and
platform firmware. If firmware owns these registers, the OS must not
change them.
Link: https://lore.kernel.org/r/20230609222500.1267795-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
pci_save_aer_state() and pci_restore_aer_state() are only used in
drivers/pci, so don't expose them to the rest of the kernel. No functional
change intended.
Link: https://lore.kernel.org/r/20230609222500.1267795-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Merge series from Mark Brown <broonie@kernel.org>:
Our existing coverage only deals with buses that provide single register
read and write operations, extend it to cover raw buses using a similar
approach with a RAM backed register map that the tests can inspect to
check operations. This coverage could be more complete but provides a
good start.
Add str_high_low() helper to return 'high' or 'low' string literal.
Also add an inversed variant, i.e. str_low_high().
All the same for str_hi_low().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some users may only need the string choice APIs. Split
the respective header, i.e. string_choices.h. Include
it in the string_helpers.h for backward compatibility.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The header files string.h and string_helpers.h are missing in
the MAINTAINERS. Add them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There have been 2 separate reports now about a non working
"dell_backlight" device getting registered under /sys/class/backlight
1 report for a Raptor Lake based Dell and 1 report for a Meteor Lake
(development) platform.
On hw from the last 10 years dell-laptop will not register "dell_backlight"
because acpi_video_get_backlight_type() will return acpi_backlight_video
there if called before the GPU/kms driver loads. So it does not matter if
the GPU driver's native backlight is registered after dell-laptop loads.
But it seems that on the latest generation laptops the ACPI tables
no longer contain acpi_video backlight control support which causes
acpi_video_get_backlight_type() to return acpi_backlight_vendor causing
"dell_backlight" to get registered if the dell-laptop module is loaded
before the GPU/kms driver.
Vendor specific backlight control like the "dell_backlight" device is
only necessary on quite old hw (from before acpi_video backlight control
was introduced). Work around "dell_backlight" registering on very new
hw (where acpi_video backlight control seems to be no more) by making
acpi_video_get_backlight_type() return acpi_backlight_none instead
of acpi_backlight_vendor as final fallback when the ACPI tables have
support for Windows 8 or later (laptops from after ~2012).
Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230607034331.576623-1-acelan.kao@canonical.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function is only used when CONFIG_BPF_JIT_ALWAYS_ON is disabled, but
CONFIG_BPF_SYSCALL is enabled. When both are turned off, the prototype is
missing but the unused function is still compiled, as seen from this W=1
warning:
[...]
kernel/bpf/core.c:2075:6: error: no previous prototype for 'bpf_patch_call_args' [-Werror=missing-prototypes]
[...]
Add a matching #ifdef for the definition to leave it out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230602135128.1498362-1-arnd@kernel.org
syzbot is again reporting circular locking dependency between
cpu_hotplug_lock and freezer_mutex. Do like what we did with
commit 57dcd64c7e ("cgroup,freezer: hold cpu_hotplug_lock
before freezer_mutex").
Reported-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=2ab700fe1829880a2ec6
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
UMP v1.1 spec allows to inform whether the function blocks are static
and not dynamically updated. Add a new flag bit to
snd_ump_endpoint_info to reflect that attribute, too.
The flag is set when a USB MIDI device is still in the old MIDI 2.0
without UMP 1.1 support. Then the driver falls back to GTBs, and they
are supposed to be static-only.
Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 supports the protocol switch via a UMP Stream message. When
it's received, we need to take care of the midi_version field in the
corresponding sequencer client, too.
This patch introduces a new ops to notify the protocol change to
snd_seq_ump_ops for handling it.
Link: https://lore.kernel.org/r/20230612081054.17200-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing applications to track the FB active changes, this patch
adds the notification from the system port at each time a FB change is
handled and the active flag or re-grouping happens.
Link: https://lore.kernel.org/r/20230612081054.17200-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the handling of the dynamic update of FB info.
When the FB info update is received after the initial parsing, it
means the dynamic FB info update. We compare the result, and if the
actual update is detected, it's notified via a new ops,
notify_fb_change, to the sequencer client, and the corresponding
sequencer ports are updated accordingly.
Link: https://lore.kernel.org/r/20230612081054.17200-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP Utility and Stream messages are "groupless", i.e. an incoming
groupless packet should be sent only to the UMP EP port, and the event
with the groupless message is sent to UMP EP as is without the group
translation per port.
Also, the former reserved bit 0 for the client group filter is now
used for groupless events. When the bit 0 is set, the groupless
events are filtered out and skipped.
Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new option to enable/disable the UMP Endpoint probing.
Some firmware seems screwed up when such a new command issued, and
this option allows user to suppress it.
Link: https://lore.kernel.org/r/20230612081054.17200-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Try to parse the UMP Endpoint and UMP Function Blocks for building the
topology at first. Only when those are missing (e.g. on an older USB
MIDI 2.0 spec or a unidirectional endpoint), the driver still creates
blocks based on USB group terminal block information as fallback.
Link: https://lore.kernel.org/r/20230612081054.17200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the basic support for UMP Endpoint and UMP Function
Block parsing, which are extended in the new UMP v1.1 spec.
The patch provides a new helper function to perform the query of the
UMP Endpoint information and builds up the UMP blocks based on UMP
Function Block information. For the communication over the UMP
Endpoint, it opens the rawmidi device once internally, inquiries the
UMP Endpoint and Function Block info by sending new UMP Stream
messages, and waits for the response for each query.
The new UMP spec allows to update the FB info and change its
associated groups or its activeness on the fly, too. For catching it,
the UMP core keeps watching the incoming UMP messages, and
snd_ump_receive() handles the incoming UMP Stream messages to refresh
the FB info.
Link: https://lore.kernel.org/r/20230612081054.17200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info
that are added in the new v1.1 spec. Those are filled by the UMP Stream
messages.
The rawmidi protocol version is bumped to 2.0.4 to indicate those
updates.
Also, update the proc outputs to show the newly introduced fields.
Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a compatible string for MediaTek Helio X10 MT6795's OverDrive (OD)
block: this is the same as MT8173.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230412112739.160376-15-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Get rid of the completion wait in svc_rdma_sendto(), and release
pages in the send completion handler again. A subsequent patch will
handle releasing those pages more efficiently.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Modified nfsd4_encode_open to encode the op_recall flag properly
for OPEN result with write delegation granted.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
At LFS 2023, it was suggested we should publicly document the name and
email of reviewers who new contributors can trust. This also gives them
some recognition for their work as reviewers.
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that Bruce's old e-mail addresses map to his current one so
he doesn't miss out on all the fun.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a rw_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a send_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a recv_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
This clean up eliminates the hack of destroying recv_ctxts that
were not created by the receive CQ thread -- recv_ctxts are now
always allocated on a "good" node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's NUMA node ID is available when allocating an
svc_xprt for an incoming connection. Use that value to ensure the
svc_xprt structure is allocated on the NUMA node closest to the
device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The below-mentioned patch was intended to simplify refcounting on the
svc_serv used by locked. The goal was to only ever have a single
reference from the single thread. To that end we dropped a call to
lockd_start_svc() (except when creating thread) which would take a
reference, and dropped the svc_put(serv) that would drop that reference.
Unfortunately we didn't also remove the svc_get() from
lockd_create_svc() in the case where the svc_serv already existed.
So after the patch:
- on the first call the svc_serv was allocated and the one reference
was given to the thread, so there are no extra references
- on subsequent calls svc_get() was called so there is now an extra
reference.
This is clearly not consistent.
The inconsistency is also clear in the current code in lockd_get()
takes *two* references, one on nlmsvc_serv and one by incrementing
nlmsvc_users. This clearly does not match lockd_put().
So: drop that svc_get() from lockd_get() (which used to be in
lockd_create_svc().
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/linux-nfs/ZHsI%2FH16VX9kJQX1@shredder/T/#u
Fixes: b73a297204 ("lockd: move lockd_start_svc() call into lockd_create_svc()")
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
