nfsd calls fh_getattr to get the latest inode attrs for pre/post-op
info. In the event that fh_getattr fails, it resorts to scraping cached
values out of the inode directly.
Since these attributes are optional, we can just skip providing them
altogether when this happens.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.
nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.
Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Accrue the following benefits:
a) Deduplicate this common bit of code.
b) Don't prepare rq_vec for NFSv2 and NFSv3 spliced reads, which
don't use rq_vec. This is already the case for
nfsd4_encode_read().
c) Eventually, converting NFSD's read path to use a bvec iterator
will be simpler.
In the next patch, nfsd_iter_read() will replace nfsd_readv() for
all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A GETATTR with a large result can advance xdr->page_ptr without
updating rq_next_page. If a splice READ follows that GETATTR in the
COMPOUND, nfsd_splice_actor can start splicing at the wrong page.
I've also seen READLINK and READDIR leave rq_next_page in an
unmodified state.
There are potentially a myriad of combinations like this, so play it
safe: move the rq_next_page update to nfsd4_encode_operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 15b23ef5d3 ("nfsd4: fix corruption of NFSv4 read data")
encountered exactly the same issue: after a splice read, a
filesystem-owned page is left in rq_pages[]; the symptoms are the
same as described there.
If the computed number of pages in nfsd4_encode_splice_read() is not
exactly the same as the actual number of pages that were consumed by
nfsd_splice_actor() (say, because of a bug) then hilarity ensues.
Instead of recomputing the page offset based on the size of the
payload, use rq_next_page, which is already properly updated by
nfsd_splice_actor(), to cause svc_rqst_release_pages() to operate
correctly in every instance.
This is a defensive change since we believe that after commit
27c934dd88 ("nfsd: don't replace page in rq_pages if it's a
continuation of last page") has been applied, there are no known
opportunities for nfsd_splice_actor() to screw up. So I'm not
marking it for stable backport.
Reported-by: Andy Zlotek <andy.zlotek@oracle.com>
Suggested-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The iproute2 output that eventually landed upstream is different than
the one used in this test, resulting in failures. Fix by adjusting the
test to use iproute2's JSON output, which is more stable than regular
output.
Fixes: 305c041899 ("selftests: net: vxlan: Add tests for vxlan nolocalbypass option.")
Signed-off-by: Vladimir Nikishkin <vladimir@nikishkin.pw>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.
When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released
Fixes: b02efbfc9a ("iser-target: Fix implicit termination of connections")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-4-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption
Fixes: bd3792205a ("iser-target: Fix pending connections handling in target stack shutdown sequnce")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-3-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
kernel after bypassing the decompressor and the CS descriptor used
ends up being the EFI one which is not mapped in the identity page
table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
-----BEGIN PGP SIGNATURE-----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=yaY/
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
-----BEGIN PGP SIGNATURE-----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=JIvi
-----END PGP SIGNATURE-----
Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
IRQ0 is no longer returned by platform_get_irq() and its ilk -- they now
return -EINVAL instead. However, the kernel code supporting SH3/4-based
SoCs still maps the IRQ #s starting at 0 -- modify that code to start the
IRQ #s from 16 instead.
The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
indeed are using IRQ0 for the SMSC911x compatible Ethernet chip.
Fixes: ce753ad154 ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/71105dbf-cdb0-72e1-f9eb-eeda8e321696@omp.ru
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The original doorbell allocation mechanism is complex and does not meet
the isolation requirement. So we introduce a new doorbell mechanism and the
original mechanism (only be used with CAP_SYS_RAWIO if hardware does not
support the new mechanism) needs to be kept as simple as possible for
compatibility.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-5-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For the isolation requirement, each QP/CQ can only issue doorbells from the
allocated mmio space. Configure the relationship between QPs/CQs and
mmio doorbell spaces to hardware in create_qp/create_cq interfaces.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Each ucontext will try to allocate doorbell resources in the extended bar
space from hardware. For compatibility, we change nothing for the original
bar space, and it will be used only for applications with CAP_SYS_RAWIO
authority in the older HW/FW environments.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a new CMDQ message to configure hardware. Initially the page size (in
the format of shift) will be passed to hardware, so that hardware can
organize the mmio space properly. It's called only if hardware supports it.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230606055005.80729-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.
However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.
The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.
To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.
Fixes: 802dcc7fc5 ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix ib_uverbs_event_read() to consider event queue closing also upon
non-blocking mode.
Once the queue is closed (e.g. hot-plug flow) all the existing events
are cleaned-up as part of ib_uverbs_free_event_queue().
An application that uses the non-blocking FD mode should get -EIO in
that case to let it knows that the device was removed already.
Otherwise, it can loose the indication that the device was removed and
won't recover.
As part of that, refactor the code to have a single flow with regards to
'is_closed' for both blocking and non-blocking modes.
Fixes: 14e23bd6d2 ("RDMA/core: Fix locking in ib_uverbs_event_read")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/97b00116a1e1e13f8dc4ec38a5ea81cf8c030210.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Thus, block non-privileged users from setting such a QKEY.
Cc: stable@vger.kernel.org
Fixes: bc38a6abdd ("[PATCH] IB uverbs: core implementation")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set static rate to 0 as it should be discovered by path query and
has no meaning for RoCE.
This also avoid of using the rtnl lock and ethtool API, which is
a bottleneck when try to setup many rdma-cm connections at the same
time, especially with multiple processes.
Fixes: 3c86aa70bf ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously we used the core device associated to the IB device in order
to do the Q-counters query to the FW, but in LAG mode it is possible
that the core device isn't the one that created this VF.
Hence instead of using the core device to query the Q-counters
we use the ESW core device which is guaranteed to be that of the VF.
Fixes: d22467a71e ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/778d7d7a24892348d0bdef17d2e5f9e044717e86.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously Q-counters data was being allocated over the PF for all of
the available vports, however that isn't necessary.
Since each VF or SF has a Q-counter allocated for itself.
So we only need to allocate two counters data structures, one for the
device counters, and one for all the other vports to expose the
representors, since they only need to read from it in order to
determine mainly counters numbers and names, so they can all share.
This in turn also solves a bug we previously had where we couldn't
switch the device to switchdev mode when there were more than 128 SF/VFs
configured, since that is the maximum amount of Q-counters available for
a single port
Fixes: d22467a71e ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f54671df16e2227a069b229b33b62cd9ee24c475.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A misbehaved user can create a steering anchor that points to a kernel
flow table and then destroy the anchor without freeing the associated
STC. This creates a problem as the kernel can't destroy the flow
table since there is still a reference to it. As a result, this can
exhaust all available flow table resources, preventing other users from
using the RDMA device.
To prevent this problem, a solution is implemented where a special flow
table with two steering rules is created when a user creates a steering
anchor for the first time. The rules include one that drops all traffic
and another that points to the kernel flow table. If the steering anchor
is destroyed, only the rule pointing to the kernel's flow table is removed.
Any traffic reaching the special flow table after that is dropped.
Since the special flow table is not destroyed when the steering anchor is
destroyed, any issues are prevented from occurring. The remaining resources
are only destroyed when the RDMA device is destroyed, which happens after
all DEVX objects are freed, including the STCs, thus mitigating the issue.
Fixes: 0c6ab0ca9a ("RDMA/mlx5: Expose steering anchor to userspace")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/b4a88a871d651fa4e8f98d552553c1cfe9ba2cd6.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Delay drop data is initiated for PFs that have the capability of
rq_delay_drop and are in roce profile.
However, PFs with RAW ethernet profile do not initiate delay drop data
on function load, causing kernel panic if delay drop struct members are
accessed later on in case a dropless RQ is created.
Thus, stage the delay drop initialization as part of RAW ethernet
PF loading process.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Nullifying qp->dbg is a preparation for the next patches
from the series in which mlx5_core_destroy_qp() could actually fail,
and then it can be called again which causes a kernel crash, since
qp->dbg was not nullified in previous call.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/1677e52bb642fd8d6062d73a5aa69083c0283dc9.1685953497.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
HDA can only support single register read and write operations so does not
benefit from block writes. This means it gets no benefit from using the
rbtree register cache over the maple tree register cache so convert it to
use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-alsa-hda-maple-v1-1-a2b725c8b8f5@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure correct handling of closed VMAs on multi-gt platforms to prevent
Use-After-Free. Currently, when GT0 goes idle, closed VMAs that are
exclusively added to GT0's closed_vma link (gt->closed_vma) and
subsequently freed by i915_vma_parked(), which assumes the entire GPU is
idle. However, on platforms with multiple GTs, such as MTL, GT1 may
remain active while GT0 is idle. This causes GT0 to mistakenly consider
the closed VMAs in its closed_vma list as unnecessary, potentially
leading to Use-After-Free issues if a job for GT1 attempts to access a
freed VMA.
Although we do take a wakeref for GT0 but it happens later, after
evaluating VMAs. To mitigate this, it is necessary to hold a GT0 wakeref
early.
v2: Use gt id to detect multi-tile(Andi)
Fix the incorrect error path.
v3: Add more comment(Andi)
Use the new gt var when possible(Andrzej)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608110103.777594-1-andi.shyti@linux.intel.com
drivers. Thank you very much! Other than that, one new driver maintainer
and the rest is usual driver bugfixes. at24 has a Kconfig dependecy fix.
-----BEGIN PGP SIGNATURE-----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=m0XT
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
Most of the changes this time are for the Qualcomm Snapdragon platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon, rpmh-rsc,
ramp_controller and rmtfs driver as well as the AMD tee firmware
driver and a missing initialization in the Arm ff-a firmware driver.
The Qualcomm RPMh and EDAC drivers need some rework to work correctly
on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable
properties on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire.
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
-----BEGIN PGP SIGNATURE-----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=auoN
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller. When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally. Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.
This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify remaining bindings with usage of unevaluatedProperties. This
will have the same functional effect with less code.
-----BEGIN PGP SIGNATURE-----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=hvDG
-----END PGP SIGNATURE-----
Merge tag 'qcom-pinctrl-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl Devicetree bindings changes for v6.5
Simplify remaining bindings with usage of unevaluatedProperties. This
will have the same functional effect with less code.
-----BEGIN PGP SIGNATURE-----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=H0/i
-----END PGP SIGNATURE-----
Merge tag 'nf-23-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-06-08
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Add commit and abort set operation to pipapo set abort path.
2) Bail out immediately in case of ENOMEM in nfnetlink batch.
3) Incorrect error path handling when creating a new rule leads to
dangling pointer in set transaction list.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.
Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen Mamindlapalli says:
====================
RVU NIX AF driver fixes
This patch series contains few fixes to the RVU NIX AF driver.
The first patch modifies the driver check to validate whether the req count
for contiguous and non-contiguous arrays is less than the maximum limit.
The second patch fixes HW lbk interface link credit programming.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix LBK link credits on CN10K to be same as CN9K i.e
16 * MAX_LBK_DATA_RATE instead of current scheme of
calculation based on LBK buf length / FIFO size.
Fixes: 6e54e1c539 ("octeontx2-af: cn10K: Add MTU configuration")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
txschq_alloc response have two different arrays to store continuous
and non-continuous schedulers of each level. Requested count should
be checked for each array separately.
Fixes: 5d9b976d44 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda says:
====================
net: renesas: rswitch: Improve perfromance of TX/RX
This patch series is based on net-next.git / main branch [1]. This patch
series can improve perfromance of TX in a specific condition. The previous code
used "global rate limiter" feature so that this is possible to cause
performance down if we use multiple ports at the same time. To resolve this
issue, use "hardware pause" features of GWCA and COMA. Note that this is not
related to the ethernet PAUSE frames.
< UDP TX by iperf3 >
before: about 450Mbps on both tsn0 and tsn1
after: about 950Mbps on both tsn0 and tsn1
Also, this patch series can improve performance of RX by using
napi_gro_receive().
< TCP RX by iperf >
before: about 670Mbps on tsn0
after: about 840Mbps on tsn0
[1]
The commit e06bd5e3ad ("Merge branch 'followup-fixes-for-the-dwmac-and-altera-lynx-conversion'")
Changes from v3:
https://lore.kernel.org/all/20230607015641.1724057-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Added Reviewed-by in the patch 2/2. (Maciej, thanks!)
- Fix typos in the commit description in the patch 2/2.
Changes from v2:
https://lore.kernel.org/all/20230606085558.1708766-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Added Reviewed-by in the patch 1/2. (Maciej, thanks!)
- Revise the commit description in the patch 2/2.
- Add definition to remove magic hardcoded numbers in the patch 2/2.
Changes from v1:
https://lore.kernel.org/all/20230529080840.1156458-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Use "hardware pause" feature instead of "per-queue limiter" feature.
- Drop refactaring for "per-queue limiter".
- Drop dt-bindings update because "hardware pause" doesn't need additional
clock information.
- Use napi_gro_receive() to improve RX performance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since this driver used the "global rate limiter" feature of GWCA,
the TX performance of each port was reduced when multiple ports
transmitted frames simultaneously. To improve performance, remove
the use of the "global rate limiter" feature and use "hardware pause"
features of the following:
- "per priority pause" of GWCA
- "global pause" of COMA
Note that these features are not related to the ethernet PAUSE frame.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This hardware can receive multiple frames so that using
napi_gro_receive() instead of netif_receive_skb() gets good
performance of RX.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rk3588-saradc isn't compatible with the rk3399-saradc variant,
hence, fix the following dtbs_check warning for 'oneOf' condition
failure.
DTC_CHK arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb
/home/shreeya/linux/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb:
saradc@fec10000: compatible: 'oneOf' conditional failed,
one must be fixed:
['rockchip,rk3588-saradc'] is too short
'rockchip,saradc' was expected
'rockchip,rk3066-tsadc' was expected
'rockchip,rk3399-saradc' was expected
Fixes: 2daf2ae979 ("dt-bindings: iio: adc: Add rockchip,rk3588-saradc string")
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230610143601.173307-1-shreeya.patel@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV
field is 6-bit. Although all supported SoCs have the register
with that field documented later SoCs use external clock rather than
ADC internal clock so this patch affects only meson8 family (S8* SoCs).
Fixes: 3adbf34273 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Signed-off-by: George Stark <GNStark@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
New revisions of MAX16508 report MAX16508.xx or MAX16508y.xx as device ID,
but are functionally similar to MAX16508. Add support for those chip
variants.
Cc: Vlad Sytchenko <vsytch@google.com>
Cc: Steve Foreman <foremans@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
