atomisp_register_device_nodes() already iterates over the ports/sensors
in a loop and that loop already does not include the TPG input.
So we can simply setup the CSI2-port <-> ISP and sensor <-> CSI2-port
mediactl-pad links there instead of repeating the loop in
atomisp_create_pads_links(), which atomisp_register_device_nodes()
used to call later on.
Link: https://lore.kernel.org/r/20230518153733.195306-8-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Delay mapping sensors to inputs till atomisp_register_device_nodes()
time. There are 2 reasons for this:
1. This guarantees a stable input order independent of the sensor
probe order.
2. This is a preparation patch for v4l2-async sensor probing support.
Link: https://lore.kernel.org/r/20230518153733.195306-7-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Store number of sensor lanes per port in struct atomisp_device.
This is a preparation patch for adding v4l2-async sensor probing support.
With async probing the inputs will get registered later, but we can
already fill the sensor_lanes array when parsing the fwnodes.
Link: https://lore.kernel.org/r/20230518153733.195306-6-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename __get_mipi_port() to atomisp_port_to_mipi_port(), this is not a
private (not static) function so its name should be properly prefixed.
While at is also cleanup the weird handling of ATOMISP_CAMERA_PORT_TERTIARY
this seems to be a left over from when the driver also supported CSI
receivers with only 2 ports, but those are not supported by the current
code base, so this can be cleaned up now.
Link: https://lore.kernel.org/r/20230518153733.195306-5-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that we only have a single /dev/video# node it is no longer
necessary for atomisp_video_init() to be parametrized.
Remove its parameters and while at it also change the name
from the single /dev/video# node from "ATOMISP ISP PREVIEW output"
to "ATOMISP video output".
Link: https://lore.kernel.org/r/20230518153733.195306-4-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove unused fields from struct atomisp_input_subdev:
1. frame_size is never used at all
2. sensor_index is always 0, just directly pass 0 in the single user.
Link: https://lore.kernel.org/r/20230518153733.195306-3-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For dGPU mode VRAM allocation, create amdgpu_bo from amdgpu_vm->mem_id,
to alloc from the correct memory range.
For APU mode VRAM allocation, set alloc domain to GTT, and set
bp->mem_id_plus1 from amdgpu_vm->mem_id + 1 to create amdgpu_bo, to
allocate system memory from correct NUMA node.
For GTT allocation, use mem_id -1 to allocate system memory from any
NUMA nodes.
Remove amdgpu_ttm_tt_set_mem_pool, to avoid the confusion that memory
maybe allocated from different mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mem_id_plus1 parameter to amdgpu_gem_object_create and pass it to
amdgpu_bo_create. For dGPU mode allocation, mem_id is used by VRAM
manager to get the memory partition fpfn, lpfn from xcp manager. For APU
native mode allocation, mem_id is used to get NUMA node id from xcp
manager, then pass to TTM as numa pool id to alloc memory from the
specific NUMA node. mem_id -1 means for entire VRAM or any NUMA nodes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The info in the MRFLD_PORT_NUM define is duplicate with
the ATOMISP_CAMERA_NR_PORTS and N_MIPI_PORT_ID enum values.
Drop the MRFLD_PORT_NUM define and switch to N_MIPI_PORT_ID
since the [sensor_]lanes arrays are in enum mipi_port_id order.
Link: https://lore.kernel.org/r/20230518153733.195306-2-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If xcp_mgr is initialized, add mem_id to amdgpu_vm structure to store
memory partition number when creating amdgpu_vm for the xcp. The xcp
number is decided when opening the render device, for example
/dev/dri/renderD129 is xcp_id 0, /dev/dri/renderD130 is xcp_id 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From KFD topology, application will find kfd node with the corresponding
drm device node minor number, for example if partition drm node starts
from /dev/dri/renderD129, then KFD node 0 with store drm node minor
number 129. Application will open drm node /dev/dri/renderD129 to create
amdgpu vm for kfd node 0 with the correct vm->mem_id to indicate the
memory partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used by KFD to check memory limit accounting.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Run partition schedule if it is supported during ctx init entity.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep amdgpu_ctx_mgr in ctx structure to track fpriv.
v2: add missing fpriv declaration lost in rebase
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add partition scheduler list update in late init
and xcp partition mode switch.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update header to support partition scheduling.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep track partition ID in ring.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the gc0310.h header file, moving most of its content
into atomisp-gc0310.c and dropping some unused parts.
This brings the gc0310 sensor driver inline with other sensor
regular / non atomisp sensor drivers which usually only are
one single .c file.
Link: https://lore.kernel.org/r/20230518153214.194976-9-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Find partition ID when open device from render device minor.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support partition drm devices on GC_HWIP IP_VERSION(9, 4, 3).
This is a temporary solution and will be superceded.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gc0310_s_config() used to call camera_sensor_platform_data.csi_cfg() back
when the gc0310 driver was still using the atomisp_gmin_platform code
for power-management.
Now it is just a weirdly named wrapper around gc0310_detect(), drop
gc0310_s_config() and make probe() call gc0310_detect() directly.
Link: https://lore.kernel.org/r/20230518153214.194976-8-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Selects the MTYPE to be used for local memory,
(0 = MTYPE_CC (default), 1 = MTYPE_NC, 2 = MTYPE_RW)
v2: squash in build fix (Alex)
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFXv9.4.3 NUMA APUs, system memory locality must be determined per
page to choose the correct MTYPE. This patch adds a GMC callback that
can provide this per-page override and implements it for native mode.
Carve-out mode is not yet supported and will use the safe default
(remote) MTYPE for system memory.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat system memory on NUMA systems as remote by default. Overriding with
a more efficient MTYPE per page will be implemented in the next patch.
No need for a special case for APP APUs. System memory is handled the same
for carve-out and native mode. And VRAM doesn't exist in native mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Invalidate TLBs via a legacy flush request (flush_type=0) prior to the
heavyweight flush requests (flush_type=2) in gmc_v9_0.c. This is
temporarily required to mitigate a bug causing CPC UTCL1 to return stale
translations after invalidation requests in address range mode.
v2: squash in long term fix "drm/amdgpu: disable extra gfx943 legacy flush on rev1+"
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 9.4.3 APP APU VRAM is allocated in GTT domain. While freeing
memory check for GTT domain instead of VRAM if it is APP APU
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPX compute mode is valid mode for NPS4 memory partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VRAM pgmap resource is allocated every time when switching compute
partitions because kfd_dev is re-initialized by post_partition_switch,
As a result, it causes memory region resource leaking and system
memory usage accounting unbalanced.
pgmap resource should be allocated and registered only once when loading
driver and freed when unloading driver, move it from kfd_dev to
amdgpu_kfd_dev.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC-PMFW handshake happens periodically when GFXCLK DPM is enabled and
halting RLC may cause unexpected results. Avoid halting RLC from driver
side.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access registers with the right xcc id. Also, remove the unused logic as
PG is not used in GFX v9.4.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the maximum number of queues that can be created per process
to 255 on GFX 9.4.3. There is no HWS limitation restricting the number
queues that can be created.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turns out STATUS_VALID_FLAG needs to be checked
ahead of any other fields. ADDRESS_VALID_FLAG and
ERR_INFO_VALID_FLAG only manages ADDRESS and ERR_INFO
field respectively. driver should continue poll
ERR CNT field even ERR_INFO_VALD_FLAG is not set.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reset_ras_error_count callback for jpeg v4_0_3.
It will be used to reset jpeg ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for jpeg v4_0_3.
It will be used to query and log jpeg error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN RAS enablement sequence needs to be added in
DPG HW init sequence.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reset_ras_error_count callback for vcn v4_0_3.
It will be used to reset vcn ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add query_ras_error_count callback for vcn v4_0_3.
It will be used to query and log vcn error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new ras error status registers introduced in
vcn v4_0_3 to log vcn and jpeg ras error.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove a bunch of unused includes and sort the remainging
includes alphabetically.
Link: https://lore.kernel.org/r/20230518153214.194976-7-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For SRIOV on some parts, the host driver does not post VBIOS. So the guest
cannot get bios information. Therefore, adev->virt.fw_reserve.p_pf2vf
and adev->mode_info.atom_context are NULL.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, the memory partitions are set on host drover. Each VF only
has one memory partition. We need set the memory partitions to 1 on
guest driver for SRIOV.
V2: sqaush in fix ("drm/amdgpu: Fix memory range info of GC 9.4.3 VFs")
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Acked-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MC_VM_FB_OFFSET is PF only register. It cannot be read on VF.
So, the driver should not use MC_VM_FB_OFFSET address to set the
address of dev->gmc.aper_base.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
