It has CPU:Codec = 1:1 and N:N samples, but missing 1:N settings.
This patch adds it.
One note here is that because of registering timing, probing and
CPU/Codec numbering are mismatching.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ilbx1kh3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the function so reading the data is done outside the work
function so fuzzing can pass data directly into the work callbacks.
Also expose the inner function outside the module so we can call it from
the injector.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230608221822.2825786-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit cbbc0ec6de ("ASoC: mediatek: mt8192-mt6359:
Remove " Jack" from Headphone pin name"). That commit removed the "
Jack" suffix with the reasoning that it is automatically added to the
name of the kcontrol created, which is true, but this name is also used
to look for the DAPM widget that will be toggled when the jack status is
updated. Since the widget is still called "Headphone Jack" the jack
can't link to the widget and the following error is shown:
mt8192_mt6359 sound: ASoC: DAPM unknown pin Headphone
It is not possible to also rename the headphone DAPM widget because its
name is used by a switch kcontrol, "Headphone Jack Switch", both to link
to the headphone widget and to assemble its name. This switch's name is
referenced in the upstream UCM file, so renaming it would break
userspace. Since the original commit didn't bring any benefit, besides
sparing a few CPU cycles, simply revert it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230608221050.217968-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the check for devm_reset_control_array_get_exclusive() return value.
The devm_reset_control_array_get_exclusive() function may return NULL if
it's an optional request. If optional is intended then NULL should not
be treated as an error case, but as a special kind of success case. So
here the IS_ERR() is used to check better.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230608135750.11041-2-walker.chen@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The timestamp descriptors were intended to act cyclically. Descriptors
from index 0 through gq->ring_size - 1 contain actual information, and
the last index (gq->ring_size) should have LINKFIX to indicate
the first index 0 descriptor. However, the LINKFIX value is missing,
causing the timestamp feature to stop after all descriptors are used.
To resolve this issue, set the LINKFIX to the timestamp descritors.
Reported-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
LED brightness support for Broadcom PHYs
This patch series adds support for controlling the LED brightness on
Broadcom PHYs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Broadcom PHYs have two LEDs selector registers which allow us to control
the LED assignment, including how to turn them on/off.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These registers are common to most PHYs and are not specific to the
BCM5482, renamed the constants accordingly, no functional change.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the legacy exporting is gone with 2f804aca48 ("gpiolib:
Kill unused GPIOF_EXPORT and Co") there is no need to unexport
GPIO on freeing. Remove that call.
Note, the other users of this functionality do that explicitly,
except one SH and one OMAP boardfile which don't free GPIO anyways,
so it is safe to drop the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:
tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053
Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to
the conventional network headers")
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Mikhaylov says:
====================
net/ncsi: refactoring for GMA command
Make one GMA function for all manufacturers, change ndo_set_mac_address
to dev_set_mac_address for notifiying net layer about MAC change which
ndo_set_mac_address doesn't do.
Changes from v1:
1. delete ftgmac100.txt changes about mac-address-increment
2. add convert to yaml from ftgmac100.txt
3. add mac-address-increment option for ethernet-controller.yaml
Changes from v2:
1. remove DT changes from series, will be done in another one
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndo_set_mac_address to dev_set_mac_address because
dev_set_mac_address provides a way to notify network layer about MAC
change. In other case, services may not aware about MAC change and keep
using old one which set from network adapter driver.
As example, DHCP client from systemd do not update MAC address without
notification from net subsystem which leads to the problem with acquiring
the right address from DHCP server.
Fixes: cb10c7c0df ("net/ncsi: Add NCSI Broadcom OEM command")
Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the one Get Mac Address function for all manufacturers and change
this call in handlers accordingly.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module has for a long time not been limited to iPhone <= 3GS.
Update description to match the actual state of the driver.
Remove dead link from 2010, instead reference an existing userspace
iOS device pairing implementation as part of libimobiledevice.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent iOS releases support CDC NCM encapsulation on RX. This mode is
the default on macOS and Windows. In this mode, an iOS device may include
one or more Ethernet frames inside a single URB.
Freshly booted iOS devices start in legacy mode, but are put into
NCM mode by the official Apple driver. When reconnecting such a device
from a macOS/Windows machine to a Linux host, the device stays in
NCM mode, making it unusable with the legacy ipheth driver code.
To correctly support such a device, the driver has to either support
the NCM mode too, or put the device back into legacy mode.
To match the behaviour of the macOS/Windows driver, and since there
is no documented control command to revert to legacy mode, implement
NCM support. The device is attempted to be put into NCM mode by default,
and falls back to legacy mode if the attempt fails.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The behaviour of the official iOS tethering driver on macOS is to not
transmit any trailing padding at the end of URBs. This is applicable
to both NCM and legacy modes, including older devices.
Adapt the driver to not include trailing padding in TX URBs, matching
the behaviour of the official macOS driver.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cleanup precedure in ipheth_probe will attempt to free a
NULL pointer in dev->ctrl_buf if the memory allocation for
this buffer is not successful. While kfree ignores NULL pointers,
and the existing code is safe, it is a better design to rearrange
the goto labels and avoid this.
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmR80iseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhxkH/2+2NEZjO5SCj9z6
FGrJunmXMOqoryoC3oL953Zhp3oeB/gB7GDdFQLg8tv0QprD6W0L9uorIgFi3lWU
doGWKSjFVEdu6RoUV09bTwm1DislZKJF3NCwTyeb44c3HnTzUvd/zFrY29YNRi9C
j5KXQIq91dke3qQi/3uCLFRKvmr2ss/lXapScwXFhQjaM2VmAMc51xIxkuRz3H01
EmcbJx3Rj9zPxx3Nc7ONMvtHE5+xuVsMdq3dLFCS9Xc/f+qbCCQdRIy9AjaRuR4c
F5nRjwDjq0iv2diF0gK4WtD8fvxVuLaqS0RAi0jsOKVfLphLwkqkPQbbMd5K8qwJ
xTNAiW0=
=FwWR
-----END PGP SIGNATURE-----
Merge tag 'v6.4-rc5' into media_stage
Linux 6.4-rc5
* tag 'v6.4-rc5': (919 commits)
Linux 6.4-rc5
leds: qcom-lpg: Fix PWM period limits
selftests/ftrace: Choose target function for filter test from samples
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
tpm, tpm_tis: correct tpm_tis_flags enumeration values
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
media: uvcvideo: Don't expose unsupported formats to userspace
media: v4l2-subdev: Fix missing kerneldoc for client_caps
media: staging: media: imx: initialize hs_settle to avoid warning
media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
module/decompress: Fix error checking on zstd decompression
fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
dt-bindings: serial: 8250_omap: add rs485-rts-active-high
selinux: don't use make's grouped targets feature yet
...
MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should
not be relied on by users of the Crypto API.
Instead of storing the IV on the stack, allocate it together with
the crypto request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update slice mask enum for 4xxx device with BIT(7) to mask SMX fuse.
This change is done to align the slice mask with the hardware fuse
register.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The LZS and RAND features are no longer available on QAT.
Remove the definition of bit 6 (LZS) and bit 7 (RAND) in the enum that
represents the capabilities and replace them with a comment mentioning
that those bits are reserved.
Those bits shall not be used in future.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recent commit:
020126239b Revert "x86/orc: Make it callthunk aware"
Made the only user of is_callthunk() depend on CONFIG_BPF_JIT=y, while
the definition of the helper function is unconditional.
Move is_callthunk() inside the #ifdef block.
Addresses this build failure:
arch/x86/kernel/callthunks.c:296:13: error: ‘is_callthunk’ defined but not used [-Werror=unused-function]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Tunnels between hosts should not have CL states enabled because
otherwise they might enter a low power state without the other end
noticing which causes packets to be lost. For this reason disable all
CL states upon first DMA tunnel creation. Once the last DMA tunnel is
torn down we try to re-enable them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This allows us to disable all CL states temporarily when running lane
margining and then return back the previously enabled states.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In case the boot firmware enabled any of them, read the currently
configured CL states and update the router structure accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This makes it easier to spot from the logs and follows what we do with
the TMU code already. We also log enabling/disabling CL states using the
tb_sw_dbg() instead of tb_port_dbg().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is really no need to call any of the CLx functions in the TMU code
so remove all these checks. This makes the TMU enable/disable flows
easier to follow as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently tb_switch_clx_enable() enables CL states only for the first
depth router. This is something we may want to change in the future and
in addition it is not visible from the calling path at all. For this
reason do the check in the tb.c so it is immediately visible that we
only do this for the first depth router. Fix the kernel-docs
accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This is more natural and follows the hardware register layout better.
This makes it easier to see which CL states we enable (even though they
should be enabled together). Rename 'clx_mask' to 'clx' everywhere as
this is now always bitmask.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This avoids some duplication and makes the flow slightly easier to
understand. Also follows what we do in tb_enable_tmu().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
No need to have separate functions for these so fold them into
tb_switch_clx_enable() and tb_switch_clx_disable() accordingly.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There really don't belong to switch.c so move them into their own file.
As we do this rename the functions to match the conventions used
elsewhere in the driver.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no need to duplicate the code the enables TMU. Also update the
comment to better explain why we do this in the first place.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This is better to be part of the software connection manager flows in
tb.c. Also name the new function tb_increase_tmu_accuracy() to match
what it actually does.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now this is split into two with one having a misleading name
(tb_switch_tmu_unidirectional_enable()).
Make this easier to read, rename and consolidate the two functions into
one with name that explains what it actually does. Use the two constants
as well that were added but never used to make it clear which bits are
being set.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no point passing it as we already have a field for that. While
there clean up the kernel-doc of things that do not really belong to the
API documentation (these can be figured out from the spec itself).
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Drop extra empty line and get rid of the '__' in function names. No
functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In the same way we did for the routers add a function that returns the
parent routers downstream facing port for XDomain devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce tb_switch_downstream_port() helper function that returns the
downstream port of a parent switch that is connected to the upstream
port of specified switch. From now on, we use it all across the driver
where applicable.
While there fix a whitespace in comment and rename 'downstream' to
'down' to be consistent with the rest of the driver.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
hlt,nohlt paramaters are useful when debugging cpuidle
related issues.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Provide a generic smt parameters interface aligned with s390
to allow users to limit smt usage and threads per core.
It replaced previous undocumented "nothreads" parameter for
smp-cps which is ambiguous and does not cover smp-mt.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmR80iseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhxkH/2+2NEZjO5SCj9z6
FGrJunmXMOqoryoC3oL953Zhp3oeB/gB7GDdFQLg8tv0QprD6W0L9uorIgFi3lWU
doGWKSjFVEdu6RoUV09bTwm1DislZKJF3NCwTyeb44c3HnTzUvd/zFrY29YNRi9C
j5KXQIq91dke3qQi/3uCLFRKvmr2ss/lXapScwXFhQjaM2VmAMc51xIxkuRz3H01
EmcbJx3Rj9zPxx3Nc7ONMvtHE5+xuVsMdq3dLFCS9Xc/f+qbCCQdRIy9AjaRuR4c
F5nRjwDjq0iv2diF0gK4WtD8fvxVuLaqS0RAi0jsOKVfLphLwkqkPQbbMd5K8qwJ
xTNAiW0=
=FwWR
-----END PGP SIGNATURE-----
Merge tag 'v6.4-rc5' into v4l_for_linus
Linux 6.4-rc5
* tag 'v6.4-rc5': (303 commits)
Linux 6.4-rc5
leds: qcom-lpg: Fix PWM period limits
selftests/ftrace: Choose target function for filter test from samples
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
tpm, tpm_tis: correct tpm_tis_flags enumeration values
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
module/decompress: Fix error checking on zstd decompression
fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
dt-bindings: serial: 8250_omap: add rs485-rts-active-high
selinux: don't use make's grouped targets feature yet
riscv: perf: Fix callchain parse error with kernel tracepoint events
mptcp: fix active subflow finalization
mptcp: add annotations around sk->sk_shutdown accesses
mptcp: fix data race around msk->first access
...
