tl;dr: There is a race in the TDX private<=>shared conversion code
which could kill the TDX guest. Fix it by changing conversion
ordering to eliminate the window.
TDX hardware maintains metadata to track which pages are private and
shared. Additionally, TDX guests use the guest x86 page tables to
specify whether a given mapping is intended to be private or shared.
Bad things happen when the intent and metadata do not match.
So there are two thing in play:
1. "the page" -- the physical TDX page metadata
2. "the mapping" -- the guest-controlled x86 page table intent
For instance, an unrecoverable exit to VMM occurs if a guest touches a
private mapping that points to a shared physical page.
In summary:
* Private mapping => Private Page == OK (obviously)
* Shared mapping => Shared Page == OK (obviously)
* Private mapping => Shared Page == BIG BOOM!
* Shared mapping => Private Page == OK-ish
(It will read generate a recoverable #VE via handle_mmio())
Enter load_unaligned_zeropad(). It can touch memory that is adjacent but
otherwise unrelated to the memory it needs to touch. It will cause one
of those unrecoverable exits (aka. BIG BOOM) if it blunders into a
shared mapping pointing to a private page.
This is a problem when __set_memory_enc_pgtable() converts pages from
shared to private. It first changes the mapping and second modifies
the TDX page metadata. It's moving from:
* Shared mapping => Shared Page == OK
to:
* Private mapping => Shared Page == BIG BOOM!
This means that there is a window with a shared mapping pointing to a
private page where load_unaligned_zeropad() can strike.
Add a TDX handler for guest.enc_status_change_prepare(). This converts
the page from shared to private *before* the page becomes private. This
ensures that there is never a private mapping to a shared page.
Leave a guest.enc_status_change_finish() in place but only use it for
private=>shared conversions. This will delay updating the TDX metadata
marking the page private until *after* the mapping matches the metadata.
This also ensures that there is never a private mapping to a shared page.
[ dhansen: rewrite changelog ]
Fixes: 7dbde76316 ("x86/mm/cpa: Add support for TDX shared memory")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20230606095622.1939-3-kirill.shutemov%40linux.intel.com
Add current size of rule expressions to the boundary check.
Fixes: 2c865a8a28 ("netfilter: nf_tables: add rule blob layout")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
syzkaller found a repro that causes Hung Task [0] with ipset. The repro
first creates an ipset and then tries to delete a large number of IPs
from the ipset concurrently:
IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187
IPSET_ATTR_CIDR : 2
The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET)
held, and other threads wait for it to be released.
Previously, the same issue existed in set->variant->uadt() that could run
so long under ip_set_lock(set). Commit 5e29dc36bd ("netfilter: ipset:
Rework long task execution when adding/deleting entries") tried to fix it,
but the issue still exists in the caller with another mutex.
While adding/deleting many IPs, we should release the CPU periodically to
prevent someone from abusing ipset to hang the system.
Note we need to increment the ipset's refcnt to prevent the ipset from
being destroyed while rescheduling.
[0]:
INFO: task syz-executor174:268 blocked for more than 143 seconds.
Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d
Call trace:
__switch_to+0x308/0x714 arch/arm64/kernel/process.c:556
context_switch kernel/sched/core.c:5343 [inline]
__schedule+0xd84/0x1648 kernel/sched/core.c:6669
schedule+0xf0/0x214 kernel/sched/core.c:6745
schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804
__mutex_lock_common kernel/locking/mutex.c:679 [inline]
__mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747
__mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035
mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286
nfnl_lock net/netfilter/nfnetlink.c:98 [inline]
nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295
netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546
nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365
netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x4b8/0x810 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: a7b4f989a6 ("netfilter: ipset: IP set core support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.
Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack
helper, is DNAT'ed to another destination port (e.g. 1730), while
nfqueue is being used for final acceptance (e.g. snort).
This happenned after transition from kernel 4.14 to 5.10.161.
Workarounds:
* keep the same port (1720) in DNAT
* disable nfqueue
* disable/unload h323 NAT helper
$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log
BUG: kernel NULL pointer dereference, address: 0000000000000084
[..]
RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack
[..]
nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue
nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue
nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink
[..]
Fixes: ee04805ff5 ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At the end of `nft_bitwise_reduce`, there is a loop which is intended to
update the bitwise expression associated with each tracked destination
register. However, currently, it just updates the first register
repeatedly. Fix it.
Fixes: 34cc9e5288 ("netfilter: nf_tables: cancel tracking for clobbered destination registers")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nla_nest_start_noflag() function may fail and return NULL;
the return value needs to be checked.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: d54725cd11 ("netfilter: nf_tables: support for multiple devices per netdev hook")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Yangyu Chen <cyy@cyyself.name> says:
This patchset allows case-insensitive ISA string parsing, which is
needed in the ACPI environment. As the RISC-V Hart Capabilities Table
(RHCT) description in UEFI Forum ECR[1] shows the format of the ISA
string is defined in the RISC-V unprivileged specification[2]. However,
the RISC-V unprivileged specification defines the ISA naming strings are
case-insensitive while the current ISA string parser in the kernel only
accepts lowercase letters. In this case, the kernel should allow
case-insensitive ISA string parsing. Moreover, this reason has been
discussed in Conor's patch[3]. And I have also checked the current ISA
string parsing in the recent ACPI support patch[4] will also call
`riscv_fill_hwcap` function as DT we use now.
The original motivation for my patch v1[5] is that some SoC generators
will provide generated DT with illegal ISA string in dt-binding such as
rocket-chip, which will even cause kernel panic in some cases as I
mentioned in v1[5]. Now, the rocket-chip has been fixed in PR #3333[6].
However, when using some specific version of rocket-chip with
illegal ISA string in DT, this patchset will also work for parsing
uppercase letters correctly in DT, thus will have better compatibility.
In summary, this patch not only works for case-insensitive ISA string
parsing to meet the requirements in ECR[1] but also can be a workaround
for some specific versions of rocket-chip.
* b4-shazam-merge:
dt-bindings: riscv: drop invalid comment about riscv,isa lower-case reasoning
riscv: allow case-insensitive ISA string parsing
Link: https://lore.kernel.org/r/tencent_E6911C8D71F5624E432A1AFDF86804C3B509@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
"Ease of parsing" may have been the initial argument for keeping this
string in lower-case, but parsers may have been written that expect
lower-case only.
For example, the one in released kernels currently does not behave
correctly for multi-letter extensions that begin with a capital letter.
Allowing upper-case here brings about no benefit but would break
compatibility between new devicetrees and older kernels.
Drop the comment to avoid confusing people.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/tencent_3B8290DDC66D3E624132ED39C7465CDC9807@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
According to RISC-V Hart Capabilities Table (RHCT) description in UEFI
Forum ECR, the format of the ISA string is defined in the RISC-V
unprivileged specification which is case-insensitive. However, the
current ISA string parser in the kernel does not support ISA strings
with uppercase letters.
This patch modifies the ISA string parser in the kernel to support
case-insensitive ISA string parsing.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/tencent_B30EED51C7235CA1988890E5C658BE35C107@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With slow links (<= 5GT/s) active link reporting is not mandatory, so if a
device is disconnected during system sleep we might end up waiting for it
to respond for ~60s, which slows down resume time.
PCIe r6.0, sec 6.6.1, mandates that software must wait for at least 1s
before it can assume a device is broken, so use that minimum requirement
for slow links and bail out if the device doesn't respond within 1s.
However, if the port supports active link reporting we can wait longer as
we do with the fast links.
This should make system resume time faster for slow links as well while
still following the PCIe spec.
While there move the PCI_RESET_WAIT constant into pci.c because it is
not used outside of that file anymore.
Link: https://lore.kernel.org/r/20230425064751.24951-1-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Insulate pci_set_of_node() and pci_set_bus_of_node() from possible
changes to fwnode_handle implementation by using device_set_node()
instead of open-coding dev->dev.fwnode assignments.
Link: https://lore.kernel.org/r/20230421100939.68225-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace an #ifdef on CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS with a
cpu_feature_enabled() check on X86_FEATURE_PKU. The macro magic of
DISABLED_MASK_BIT_SET() means that cpu_feature_enabled() provides the
same end result (no code generated) when PKU is disabled by Kconfig.
No functional change intended.
Cc: Jon Kohler <jon@nutanix.com>
Reviewed-by: Jon Kohler <jon@nutanix.com>
Link: https://lore.kernel.org/r/20230602010550.785722-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since c9d6015486 ("KVM: allow KVM_BUG/KVM_BUG_ON to handle 64-bit cond")
'cond' is internally converted to boolean, so caller's explicit conversion
from void* is unnecessary.
Remove the double bang.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
base-commit: 76a17bf03a268bc342e08c05d8ddbe607d294eb4
Link: https://lore.kernel.org/r/20230605114852.288964-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Request an APIC-access page reload when the backing page is migrated (or
unmapped) if and only if vendor code actually plugs the backing pfn into
structures that reside outside of KVM's MMU. This avoids kicking all
vCPUs in the (hopefully infrequent) scenario where the backing page is
migrated/invalidated.
Unlike VMX's APICv, SVM's AVIC doesn't plug the backing pfn directly into
the VMCB and so doesn't need a hook to invalidate an out-of-MMU "mapping".
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230602011518.787006-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM honors past and in-progress mmu_notifier invalidations when
reloading the APIC-access page, use KVM's "standard" invalidation hooks
to trigger a reload and delete the one-off usage of invalidate_range().
Aside from eliminating one-off code in KVM, dropping KVM's use of
invalidate_range() will allow common mmu_notifier to redefine the API to
be more strictly focused on invalidating secondary TLBs that share the
primary MMU's page tables.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230602011518.787006-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Re-request an APIC-access page reload if there is a relevant mmu_notifier
invalidation in-progress when KVM retrieves the backing pfn, i.e. stall
vCPUs until the backing pfn for the APIC-access page is "officially"
stable. Relying on the primary MMU to not make changes after invoking
->invalidate_range() works, e.g. any additional changes to a PRESENT PTE
would also trigger an ->invalidate_range(), but using ->invalidate_range()
to fudge around KVM not honoring past and in-progress invalidations is a
bit hacky.
Honoring invalidations will allow using KVM's standard mmu_notifier hooks
to detect APIC-access page reloads, which will in turn allow removing
KVM's implementation of ->invalidate_range() (the APIC-access page case is
a true one-off).
Opportunistically add a comment to explain why doing nothing if a memslot
isn't found is functionally correct.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230602011518.787006-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is no more needs to use a dedicated wake up interrupt for RTC as
EXTI block manages by itself now all interrupt lines.
Dedicated wakeup interrupt has been introduced with STM32 MP1 support
commit b72252b658 ("rtc: stm32: add stm32mp1 rtc support") because GIC &
EXTI interrupts were not yet linked in EXTI driver.
Removing this interrupt won't break compatibility with device trees which
do use two interrupts entries: it could only prevent wakeup from low power
modes on STM32MP1x, but platform power management is not yet available.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230531122732.1515594-1-amelie.delaunay@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Make the pattern matching node names a bit stricter to improve DTS
consistency. The pattern is restricted to:
1. Only one unit address or one -N suffix,
2. -N suffixes to decimal numbers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230530144851.92059-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20230522105049.1467313-31-schnelle@linux.ibm.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505121136.1185653-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Currently Sparse warns the following when compiling kernel/capability.c:
kernel/capability.c:191:35: warning: incorrect type in argument 2
(different address spaces)
kernel/capability.c:191:35: expected void const *from
kernel/capability.c:191:35: got struct __user_cap_data_struct
[noderef] __user *
kernel/capability.c:168:14: warning: dereference of noderef expression
...... (multiple noderef warnings on different locations)
kernel/capability.c:244:29: warning: incorrect type in argument 1
(different address spaces)
kernel/capability.c:244:29: expected void *to
kernel/capability.c:244:29: got struct __user_cap_data_struct
[noderef] __user ( * )[2]
kernel/capability.c:247:42: warning: dereference of noderef expression
...... (multiple noderef warnings on different locations)
It seems that defining `struct __user_cap_data_struct` together with
`cap_user_data_t` make Sparse believe that the struct is `noderef` as
well. Separate their definitions to clarify their respective attributes.
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: wrapped long lines in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
edac_debugfs_create_file() returns ERR_PTR by way of the respective
debugfs function it calls, if an error occurs.
The appropriate way to verify for errors is to use IS_ERR(). Do so.
[ bp: Rewrite all text. ]
Signed-off-by: Yeqi Fu <asuk4.q@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230517173111.365787-1-asuk4.q@gmail.com
Jakub Kicinski says:
====================
tools: ynl: user space C
Use the code gen which is already in tree to generate a user space
library for a handful of simple families. I find YNL C quite useful
in some WIP projects, and I think others may find it useful, too.
I was hoping someone will pick this work up and finish it...
but it seems that Python YNL has largely stolen the thunder.
Python may not be great for selftest, tho, and actually this lib
is more fully-featured. The Python script was meant as a quick demo,
funny how those things go.
v2: https://lore.kernel.org/all/20230604175843.662084-1-kuba@kernel.org/
v1: https://lore.kernel.org/all/20230603052547.631384-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20230605190108.809439-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a sample application using the C library.
My main goal is to make writing selftests easier but until
I have some of those ready I think it's useful to show off
the functionality and let people poke and tinker.
Sample outputs - dump:
$ ./netdev
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 0
lo[1] 0:
enp1s0[2] 23: basic redirect rx-sg
Notifications (watching veth pair getting added and deleted):
$ ./netdev
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): -2
[53] 0: (ntf: dev-add-ntf)
[54] 0: (ntf: dev-add-ntf)
[54] 23: basic redirect rx-sg (ntf: dev-change-ntf)
[53] 23: basic redirect rx-sg (ntf: dev-change-ntf)
[53] 23: basic redirect rx-sg (ntf: dev-del-ntf)
[54] 23: basic redirect rx-sg (ntf: dev-del-ntf)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generate the code for netdev and fou families. They are simple
and already supported by the code gen.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add "fixed" part of the user space Netlink Spec-based library.
This will get linked with the protocol implementations to form
a full API.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since PM8998/PM660, the power key debounce register was redefined to
support shorter debounce times. On PM8941 the shortest debounce time
(represented by register value 0) was 15625us, on PM8998 the shortest
debounce time is 62us, with the default being 2ms.
Adjust the bit shift to correctly program debounce on PM8998 and newer.
Fixes: 68c581d5e7 ("Input: add Qualcomm PM8941 power key driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230529-pm8941-pwrkey-debounce-v1-2-c043a6d5c814@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch fixes the error checking in wkup_m3_ipc.c in
debugfs_create_dir. The correct way to check if an error occurred
is 'IS_ERR' inline function.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20230517172431.13507-1-osmtendev@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There is no gpiod_export() and gpiod_unexport() looks pretty much stray.
The gpiod_export() and gpiod_unexport() shouldn't be used in the code,
GPIO sysfs is deprecated. That said, simply drop the stray call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-wpan/20230528140938.34034-1-andriy.shevchenko@linux.intel.com
Instead of constantly checking pointer(s) for non-NULL-ness provide
default implementations of trigger() and read() and instantiate them during
pore registration if driver-specific versions were not provided.
Link: https://lore.kernel.org/r/ZGvoqP5PAAsJuky4@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
regmap_set_bits() is equivalent to regmap_update_bits() if mask == val.
The probe function uses regmap_clear_bits() to enable irqs, so
symmetrically make use of regmap_set_bits() to disable them. There is no
semantic difference.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230605161458.117361-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning).
To improve here there is a quest to make the remove callback return void.
In the first step of this quest all drivers are converted to .remove_new()
which already returns void. Eventually after all drivers are converted,
.remove_new() is renamed to .remove().
Before this driver might have returned an error. In this case emit a
warning that tells more about the problem than the generic warning by
the core, and instead of making the remove callback return zero
unconditionally, convert to .remove_new() which is equivalent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230605161458.117361-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
fixed NETLINK_LIST_MEMBERSHIPS length report which caused
selftest sockopt_sk failure. The failure log looks like
test_sockopt_sk:PASS:join_cgroup /sockopt_sk 0 nsec
run_test:PASS:skel_load 0 nsec
run_test:PASS:setsockopt_link 0 nsec
run_test:PASS:getsockopt_link 0 nsec
getsetsockopt:FAIL:Unexpected NETLINK_LIST_MEMBERSHIPS value unexpected Unexpected NETLINK_LIST_MEMBERSHIPS value: actual 8 != expected 4
run_test:PASS:getsetsockopt 0 nsec
#201 sockopt_sk:FAIL
In net/netlink/af_netlink.c, function netlink_getsockopt(), for NETLINK_LIST_MEMBERSHIPS,
nlk->ngroups equals to 36. Before Commit f4e4534850, the optlen is calculated as
ALIGN(nlk->ngroups / 8, sizeof(u32)) = 4
After that commit, the optlen is
ALIGN(BITS_TO_BYTES(nlk->ngroups), sizeof(u32)) = 8
Fix the test by setting the expected optlen to be 8.
Fixes: f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230606172202.1606249-1-yhs@fb.com
TDX code is going to provide guest.enc_status_change_prepare() that is
able to fail. TDX will use the call to convert the GPA range from shared
to private. This operation can fail.
Add a way to return an error from the callback.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20230606095622.1939-2-kirill.shutemov%40linux.intel.com
The async discard uses the BTRFS_FS_DISCARD_RUNNING bit in the fs_info
to force discards off when the filesystem has aborted or we're generally
not able to run discards. This gets flipped on when we're mounted rw,
and also when we go from ro->rw.
Commit 63a7cb1307 ("btrfs: auto enable discard=async when possible")
enabled async discard by default, and this meant
"mount -o ro /dev/xxx /yyy" had async discards turned on.
Unfortunately, this meant our check in btrfs_remount_cleanup() would see
that discards are already on:
/* If we toggled discard async */
if (!btrfs_raw_test_opt(old_opts, DISCARD_ASYNC) &&
btrfs_test_opt(fs_info, DISCARD_ASYNC))
btrfs_discard_resume(fs_info);
So, we'd never call btrfs_discard_resume() when remounting the root
filesystem from ro->rw.
drgn shows this really nicely:
import os
import sys
from drgn.helpers.linux.fs import path_lookup
from drgn import NULL, Object, Type, cast
def btrfs_sb(sb):
return cast("struct btrfs_fs_info *", sb.s_fs_info)
if len(sys.argv) == 1:
path = "/"
else:
path = sys.argv[1]
fs_info = cast("struct btrfs_fs_info *", path_lookup(prog, path).mnt.mnt_sb.s_fs_info)
BTRFS_FS_DISCARD_RUNNING = 1 << prog['BTRFS_FS_DISCARD_RUNNING']
if fs_info.flags & BTRFS_FS_DISCARD_RUNNING:
print("discard running flag is on")
else:
print("discard running flag is off")
[root]# mount | grep nvme
/dev/nvme0n1p3 on / type btrfs
(rw,relatime,compress-force=zstd:3,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/)
[root]# ./discard_running.drgn
discard running flag is off
[root]# mount -o remount,discard=sync /
[root]# mount -o remount,discard=async /
[root]# ./discard_running.drgn
discard running flag is on
The fix is to call btrfs_discard_resume() when we're going from ro->rw.
It already checks to make sure the async discard flag is on, so it'll do
the right thing.
Fixes: 63a7cb1307 ("btrfs: auto enable discard=async when possible")
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Let's print available ASID ranges for SEV/SEV-ES guests.
This information can be useful for system administrator
to debug if SEV/SEV-ES fails to enable.
There are a few reasons.
SEV:
- NPT is disabled (module parameter)
- CPU lacks some features (sev, decodeassists)
- Maximum SEV ASID is 0
SEV-ES:
- mmio_caching is disabled (module parameter)
- CPU lacks sev_es feature
- Minimum SEV ASID value is 1 (can be adjusted in BIOS/UEFI)
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/r/20230522161249.800829-3-aleksandr.mikhalitsyn@canonical.com
[sean: print '0' for min SEV-ES ASID if there are no available ASIDs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The spi geni driver in SE DMA mode, unlike GSI DMA, is not making use of
DMA mapping functionality available in the framework.
The driver does mapping internally which makes dma buffer fields available
in spi_transfer struct superfluous while requiring additional members in
spi_geni_master struct.
Conform to the design by having framework handle map/unmap and do only
DMA transfer in the driver; this also simplifies code a bit.
Fixes: e5f0dfa78a ("spi: spi-geni-qcom: Add support for SE DMA mode")
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1684325894-30252-3-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The geni_se_xx_dma_prep() interfaces necessarily do DMA mapping before
initiating DMA transfers. This is not suitable for spi where framework
is expected to handle map/unmap.
Expose new interfaces geni_se_xx_init_dma() which do only DMA transfer.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1684325894-30252-2-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wkup_uart and main_uart1 on this platform is used by tifs and DM
firmwares. Describe them for completeness including the pinmux.
Signed-off-by: Nishanth Menon <nm@ti.com>
[bb@ti.com: updated pinmux and commit subject]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230425221708.549675-1-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This patch adds support for TPS6594 regulators (bucks and LDOs).
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Bucks can be used in single or multiphase mode, depending on PMIC
part number.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Link: https://lore.kernel.org/r/20230522163115.2592883-4-eblanc@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
