struct rtw89_btc_btf_tlv contains a one-byte member that is intended as a
flexible array:
In function 'fortify_memcpy_chk',
inlined from '_append_tdma' at drivers/net/wireless/realtek/rtw89/coex.c:1579:3:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Make this actually use a flexible array to let the compiler understand.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230523113241.2772811-1-arnd@kernel.org
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522085924.913649-1-colin.i.king@gmail.com
The register-based H2C/C2H are used to exchange commands and events with
firmware. The exchange data is limited, but it is relatively simple,
because it can work before HCI initialization. To make these code clean,
use struct to access them. This patch doesn't change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522122513.13559-6-pkshih@realtek.com
RX descriptor is to provide basic and important information related to
packets, such as packet size, security, MAC ID and so on. Change to use
struct to access these fields, and not change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522122513.13559-5-pkshih@realtek.com
PHY status IEs generated by BB hardware is to provide more detail
information related to received packets, such as RSSI and bandwidth.
To avoid type casting, change buf type from u8* to void* as well.
This patch doesn't change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522122513.13559-4-pkshih@realtek.com
If received packet type is PPDU status, RX info provides information
attached by MAC hardware, and mention how long BB information attached.
This conversion patch doesn't change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522122513.13559-3-pkshih@realtek.com
The next generation chips use different RX descriptor format, so add
a chip_ops to hook suitable handlers. Also, the length of RX descriptor is
different, so add a variable to store the length according to chip and
descriptor content dynamically. Then, the code can be more general.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522122513.13559-2-pkshih@realtek.com
Since 8851BE is ready, so add 8851BE to Makefile and Kconfig. Currently,
it can support STA, AP and monitor modes with good performance.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-8-pkshih@realtek.com
8851B has the same issue: management frames get stuck when WiFi
chip enters low PS mode, so we also add notify wake function to
trigger WiFi chip wake before forwarding management frames.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-7-pkshih@realtek.com
The register ranges of upcoming chips are different from current, and even
existing chips have different ranges, so support longer length to dump
registers. Then, user space can decide the ranges according to chip.
Since arbitrary length (e.g. 7) would be a little complicated, so simply
make length a multiple of 16. The output looks like
18620000h : 8580801f 8282828282828282 080800fd
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-6-pkshih@realtek.com
These configurations include path control, TX grant, TX scheduler,
register-based H2C/C2H and so on.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-4-pkshih@realtek.com
These capabilities include helpers of BT coexistence, RX PPDU status
parser, DIG (dynamic initial gain) and CFO (center frequency offset)
settings.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-3-pkshih@realtek.com
Get TX power value from tables according to selected country and channel,
and set proper power to registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230519031500.21087-2-pkshih@realtek.com
H2C of packet offload needs to wait FW ACK by C2H. But, it's possible
that packet offload happens during SER (system error recovery), e.g.
SER L2 which restarts HW. More, packet offload flow isn't deferrable.
So, the H2C wait may get `ret == 1` (unreachable).
However, the logic FW deals with packet offload is simple enough, just
clone content. It means that as long as the H2C is issued successfully,
the thing will succeed sooner or later. Therefore, after we add a debug
log when receiving ACK to packet offload, it would be acceptable that
during SER, packet offload don't really wait for ACK. And, if debugging,
we can still check its debug logs. Besides, we can expect that if we see
SER before receiving ACK to packet offload, those debug logs of the ACK
have a time difference.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516082441.11154-4-pkshih@realtek.com
Some specific H2C (host to chip command) needs waiting until FW ACK by
C2H (chip to host event). However, during SER (system error recovery),
most interrupts are disabled, so we can't receive C2H immediately. It
causes this kind of H2C TX waits will always time out during SER.
To save time spent by SER, we don't do these redundant waits. And, to
make a difference from -ETIMEDOUT in other cases, we make the function
return 1 for SER case. When some H2C callers really catch `ret == 1` at
runtime, they can determine whether it's reasonable or not, and consider
how to resolve their flow if needed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516082441.11154-3-pkshih@realtek.com
The total_sta_assoc and the tdls_peer are used for statistics accodring
to stations' information. L2 (Level 2) SER (system error recovery) will
call ieee80211_restart_hw() which re-invokes sta_state ops. And then,
the total_sta_assoc and tdls_peer will be re-increased. In case wrong
statistics results, we reset them in SER L2 handling.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516082441.11154-2-pkshih@realtek.com
Wire up RTL8723DS chipset support using the rtw88 SDIO HCI code as well
as the existing RTL8723D chipset code.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522202425.1827005-5-martin.blumenstingl@googlemail.com
RTL8723DS comes in two variant and each of them has their own SDIO ID:
- 0xd723 can connect two antennas. The WiFi part is still 1x1 so the
second antenna can be dedicated to Bluetooth
- 0xd724 can only connect one antenna so it's shared between WiFi and
Bluetooth
Add a new entry for the single antenna RTL8723DS (0xd724) which can be
found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry
(0xd723) so it's name reflects that it's the variant with support for
two antennas.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522202425.1827005-4-martin.blumenstingl@googlemail.com
The efuse of the SDIO RTL8723DS chip has only one known member: the mac
address is at offset 0x11a. Add a struct rtw8723ds_efuse describing this
and use it for copying the mac address when the SDIO bus is used.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522202425.1827005-3-martin.blumenstingl@googlemail.com
rtw_sdio_rx_isr() is responsible for receiving data from the wifi chip
and is called from the SDIO interrupt handler when the interrupt status
register (HISR) has the RX_REQUEST bit set. After the first batch of
data has been processed by the driver the wifi chip may have more data
ready to be read, which is managed by a loop in rtw_sdio_rx_isr().
It turns out that there are cases where the RX buffer length (from the
REG_SDIO_RX0_REQ_LEN register) does not match the data we receive. The
following two cases were observed with a RTL8723DS card:
- RX length is smaller than the total packet length including overhead
and actual data bytes (whose length is part of the buffer we read from
the wifi chip and is stored in rtw_rx_pkt_stat.pkt_len). This can
result in errors like:
skbuff: skb_over_panic: text:ffff8000011924ac len:3341 put:3341
(one case observed was: RX buffer length = 1536 bytes but
rtw_rx_pkt_stat.pkt_len = 1546 bytes, this is not valid as it means
we need to read beyond the end of the buffer)
- RX length looks valid but rtw_rx_pkt_stat.pkt_len is zero
Check if the RX_REQUEST is set in the HISR register for each iteration
inside rtw_sdio_rx_isr(). This mimics what the RTL8723DS vendor driver
does and makes the driver only read more data if the RX_REQUEST bit is
set (which seems to be a way for the card's hardware or firmware to
tell the host that data is ready to be processed).
For RTW_WCPU_11AC chips this check is not needed. The RTL8822BS vendor
driver for example states that this check is unnecessary (but still uses
it) and the RTL8822CS drops this check entirely.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522202425.1827005-2-martin.blumenstingl@googlemail.com
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230522105049.1467313-44-schnelle@linux.ibm.com
The tramp_alias macro constructs the virtual alias of a symbol in the
trampoline text mapping, based on its kernel text address, and does so
in a way that is more convoluted than necessary. So let's simplify that.
Also, now that the address of the vector table is kept in a per-CPU
variable, there is no need to defer the load and the assignment of
VBAR_EL1 to tramp_exit(). This means we can use a PC-relative reference
to the per-CPU variable instead of storing its absolute address in a
global variable in the trampoline rodata.
And given that tramp_alias no longer needs a temp register, this means
we can restore X30 earlier as well, and only leave X29 for tramp_exit()
to restore.
While at it, give some related symbols static linkage, considering that
they are only referenced from the object file that defines them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230418143604.1176437-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, the KPTI trampoline code for returning to user space takes
care to only preserve X29 into FAR_EL1 for native tasks, as compat tasks
don't have access to this register anyway, and so preserving it is not
necessary. It also means it does not need to be restored, and so we have
two code paths for returning back to user space: the native one that
restores X29 from FAR_EL1, and the compat one that leaves X29 clobbered,
containing the value of TTBR1_EL1, which carries a physical address
pointing somewhere into the kernel image.
This is needlessly complex, and given that FAR_EL1 becomes UNKNOWN after
an exception return anway, the only benefit of avoiding the preserve and
restore is that we can skip the system register write and read.
So let's simplify this, and collapse the two code paths into one that
always preserves X29 into FAR_EL1, and always restores it again after
the TTBR switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230418143604.1176437-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The sq thread actively releases CPU resources by calling the
cond_resched() and schedule() interfaces when it is idle. Therefore,
more resources are available for other threads to run.
There exists a problem in sq thread: it does not unlock sqd->lock before
releasing CPU resources every time. This makes other threads pending on
sqd->lock for a long time. For example, the following interfaces all
require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers()
and io_ring_exit_work().
Before the sq thread releases CPU resources, unlocking sqd->lock will
provide the user a better experience because it can respond quickly to
user requests.
Signed-off-by: Kanchan Joshi<joshi.k@samsung.com>
Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com>
Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Krzysztof noticed that patches for arch/arm64/boot/dts/microchip were
getting lost & the listed tree was inactive.
Nicolas and I are willing to shepherd patches to Arnd, using the
existing at91 tree, so add a new entry covering
arch/arm64/boot/dts/microchip, listing us as maintainers.
Drop the tree from the existing sparx5 entry & narrow the devicetree
pattern to just sparx devices, leaving Lars, Steen and Daniel looking
after support for their SoCs.
CC: Rob Herring <robh+dt@kernel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC: Conor Dooley <conor@kernel.org>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Claudiu Beznea <claudiu.beznea@microchip.com>
CC: soc@kernel.org
CC: Lars Povlsen <lars.povlsen@microchip.com>
CC: Steen Hegelund <Steen.Hegelund@microchip.com>
CC: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230522-wagon-stencil-a164ec39322a@wendy
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
with clock re-parenting.
- Add missing pvcie-supply regulator for imx6qdl-mba6 board.
- A series of colibri-imx8x board fixes on pin configuration.
- Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
stability problems.
- A couple of changes from Frank Li to correct cdns,usb3 bindings
cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
i.MX8QM & QXPB0.
- Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
detection failure.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmRjhcYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM41EQf/Rjk68gAG2dZfFV33PYcnONrJJYuz
gtnBME7XtHqSR5dKByUIXqtSrn9ROY3RQt0Kp2dWv/dY248PtF4IdldsAjr6tF6P
Sy8m6tdG9n+tvCgsHGKxhomLm2Wophwt5+Na8G+3XPLzs9PsiBuRLIHWPMAqOiZX
+TzpzNOwflGt49HRqAObzAexmR24cG9U6N5dcNb/avd4qMguuh4UVkMpTsDuz9gi
Lpt3K8yCjy8AexlB4Fti/8F1cZUcmJRRsUeFhlduBLgeHKHAEJaTJZuTHUtkmRXT
CxW3ya2HKGJE4Swea4CDpjhrOS3nZBkp1Z2VyjPUJIszauuBZzHm4Pvkdw==
=vZ+e
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6H6u
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4:
- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
with clock re-parenting.
- Add missing pvcie-supply regulator for imx6qdl-mba6 board.
- A series of colibri-imx8x board fixes on pin configuration.
- Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
stability problems.
- A couple of changes from Frank Li to correct cdns,usb3 bindings
cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
i.MX8QM & QXPB0.
- Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
detection failure.
* tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS
flag is passed as @max_active parameter instead of OR'ing with the other
flags in the @flags parameter.
-----BEGIN PGP SIGNATURE-----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=td1Z
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B4NY
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.4
Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS
flag is passed as @max_active parameter instead of OR'ing with the other
flags in the @flags parameter.
* tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
Link: https://lore.kernel.org/r/20230509143529.1188812-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of fixes to address the missing required 'cache-unified' property
in the level 2 and 3 caches on some of the FVP/vexpress platforms.
-----BEGIN PGP SIGNATURE-----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=rMXM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Orpf
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FVP/Vexpress fixes for v6.4
Couple of fixes to address the missing required 'cache-unified' property
in the level 2 and 3 caches on some of the FVP/vexpress platforms.
* tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: add missing cache properties
ARM: dts: vexpress: add missing cache properties
Link: https://lore.kernel.org/r/20230509143508.1188786-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use IOU_F_TWQ_LAZY_WAKE via iou_cmd_exec_in_task_lazy() for passthrough
commands completion. It further delays the execution of task_work for
DEFER_TASKRUN until there are enough of task_work items queued to meet
the waiting criteria, which reduces the number of wake ups we issue.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ecdfacd0967a22d88b7779e2efd09e040825d0f8.1684154817.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want to use IOU_F_TWQ_LAZY_WAKE in commands. First, introduce a new
cmd tw helper accepting TWQ flags, and then add
io_uring_cmd_do_in_task_laz() that will pass IOU_F_TWQ_LAZY_WAKE and
imply the "lazy" semantics, i.e. it posts no more than 1 CQE and
delaying execution of this tw should not prevent forward progress.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5b9f6716006df7e817f18bd555aee2f8f9c8b0c3.1684154817.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add some basic documentation for kunit_add_action() and related
deferred action functions.
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_add_action() function is much simpler and cleaner to use that
the full KUnit resource API for simple things like the
kunit_kmalloc_array() functionality.
Replacing it allows us to get rid of a number of helper functions, and
leaves us with no uses of kunit_alloc_resource(), which has some
usability problems and is going to have its behaviour modified in an
upcoming patch.
Note that we need to use kunit_defer_trigger_all() to implement
kunit_kfree().
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now we have the kunit_add_action() function, we can use it to implement
kfree_at_end() and free_subsuite_at_end() without the need for extra
helper functions.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Many uses of the KUnit resource system are intended to simply defer
calling a function until the test exits (be it due to success or
failure). The existing kunit_alloc_resource() function is often used for
this, but was awkward to use (requiring passing NULL init functions, etc),
and returned a resource without incrementing its reference count, which
-- while okay for this use-case -- could cause problems in others.
Instead, introduce a simple kunit_add_action() API: a simple function
(returning nothing, accepting a single void* argument) can be scheduled
to be called when the test exits. Deferred actions are called in the
opposite order to that which they were registered.
This mimics the devres API, devm_add_action(), and also provides
kunit_remove_action(), to cancel a deferred action, and
kunit_release_action() to trigger one early.
This is implemented as a resource under the hood, so the ordering
between resource cleanup and deferred functions is maintained.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi
chipset.
Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-5-bryan.odonoghue@linaro.org
The msm8939-pm8916.dtsi include configures the regulator supplies of
MSM8939 used together with PM8916, as recommended by Qualcomm. In rare
cases where boards deviate from the recommended design they can just
avoid using this include.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-4-bryan.odonoghue@linaro.org
Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
differences to msm8916.
- big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
- DRAM 1x800 LPDDR3
- Camera 4+4 lane CSI
- Venus @ 1080p60 HEVC
- DSI x 2
- Adreno A405
- WiFi wcn3660/wcn3680b 802.11ac
Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Co-developed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-3-bryan.odonoghue@linaro.org
When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL,
which leaves <match_table> unused, leading to warning such as:
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c:1175:34:
warning: unused variable 'c8sectpfe_match' [-Wunused-const-variable]
Drop the of_match_ptr usage to avoid such warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This switches the driver from using legacy gpio API and to the newer
gpiod API. Since ordinary gpiod APIs operate on logical and not
electrical levels, handling of the reset GPIO is adjusted accordingly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for R-Car V4H. The V4H uses the ISP Channel Selector as its
only possible video input source. Even tho V4H is a Gen3 board the VIN
interface is very close to the one found on the V3U, for this reason
mark it as a Gen3 model internally.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for R-Car V4H. The ISP Channel Selector is used to route
channels to the different VIN modules. The ISP CS found in the V4H is
very similar to the one found on the V3U.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add basic support for outputting the test patterns on a 3-lane CSI-2
C-PHY bus. As the driver only can output frames form its internal test
pattern generator, enabling C-PHY output is as simple as setting the
output mode to C-PHY instead of D-PHY.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Sakari Ailus: Wrap long lines.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the __imx7_csi_video_try_fmt() helper function to initialize the
default format at probe time. This improves consistency by using the
same code path for both default initialization and validation at
runtime, and allows dropping the now unused imx7_csi_find_pixel_format()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver unconditionally aligns the image width to multiples of 8
pixels. The real alignment constraint is 8 bytes, as indicated by the
CSI_IMAG_PARA.IMAGE_WIDTH documentation that calls for 8 pixel alignment
for 8bpp formats and 4 pixel alignment for other formats.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver doesn't currently support interlacing, but due to legacy
leftovers, it accepts values for the pixel format "field" field other
than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper
interlacing support can be implemented later if desired.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no need to convert input pixformat to mbus_framefmt and back
again. Instead apply pixformat width constrains directly.
Assign compose values before adjusting pixformat height/width.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
