Add a lightweight spinlock check which uses only two instructions
per spinlock call. It detects if a spinlock has been trashed by
some memory corruption and then halts the kernel. It will not detect
uninitialized spinlocks, for which CONFIG_DEBUG_SPINLOCK needs to
be enabled.
This lightweight spinlock check shouldn't influence runtime, so it's
safe to enable it by default.
The __ARCH_SPIN_LOCK_UNLOCKED_VAL constant has been choosen small enough
to be able to be loaded by one LDI assembler statement.
Signed-off-by: Helge Deller <deller@gmx.de>
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LCD Controller supported by the drm-shmob driver is present
on SuperH SH-Mobile SoCs, and on Renesas ARM SH/R-Mobile SoCs.
Unfortunately its config option is not visible on either, so the user
can never enable the support.
Fix this by dropping the dependency on ARM (for SuperH), and by widening
the dependency range to ARCH_RENESAS (for ARM).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/40ac67e0887d833ab4a3f1ec24828dedf0d8e108.1684854992.git.geert+renesas@glider.be
Set up generic fbdev emulation, to enable support for the Linux console.
Use 16 as the preferred depth, as that is a good compromise between
colorfulness and resource utilization, and the default of the fbdev
driver.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c836938112fda21762bc9eb2741ccd0cbf1197ef.1684854992.git.geert+renesas@glider.be
The SH-Mobile DRM driver uses the legacy drm_crtc_init(), which
advertizes only the formats in safe_modeset_formats[] (XR24 and AR24) as
being supported.
Switch to drm_crtc_init_with_planes(), and advertize all supported
(A)RGB modes, so we can use RGB565 as the default mode for the console.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2098de3d33bc479a8569da7dcbafdb685ff0a13a.1684854992.git.geert+renesas@glider.be
DRM_FORMAT_XRGB8888 aka XR24 is the modus francus of DRM, and should be
supported by all drivers.
The handling for DRM_FORMAT_XRGB8888 is similar to DRM_FORMAT_ARGB8888,
just ignore the alpha channel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/888cde6d1f70f1610931c4a89801060bb6765ff2.1684854992.git.geert+renesas@glider.be
Fbtest contains some very simple validation of the fbdev userspace API
contract. When used with shmob-drm, it reports the following warnings
and errors:
height changed from 68 to 0
height was rounded down
width changed from 111 to 0
width was rounded down
accel_flags changed from 0 to 1
The first part happens because __fill_var() resets the physical
dimensions of the first connector, as filled in by drm_setup_crtcs_fb().
Fix this by retaining the original values.
The last part happens because __fill_var() forces the FB_ACCELF_TEXT
flag on, while fbtest disables all acceleration on purpose, so it can
draw safely to the frame buffer. Fix this by setting accel_flags to
zero, as DRM does not implement any text console acceleration.
Note that this issue can also be seen in the output of fbset, which
reports "accel true".
Fixes: ee4cce0a8f ("drm/fb-helper: fix input validation gaps in check_var")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/57e6b334dae8148b1b8ae6ef308ce9a83810a850.1684854344.git.geert+renesas@glider.be
Currently we use the normal single register write function to load the
default values into the cache, resulting in a large number of reallocations
when there are blocks of registers as we extend the memory region we are
using to store the values. Instead scan through the list of defaults for
blocks of adjacent registers and do a single allocation and insert for each
such block. No functional change.
We do not take advantage of the maple tree preallocation, this is purely at
the regcache level. It is not clear to me yet if the maple tree level would
help much here or if we'd have more overhead from overallocating and then
freeing maple tree data.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230523-regcache-maple-load-defaults-v1-1-0c04336f005d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Unfortunately the maple tree requires us to explicitly lock it so we need
to take the RCU read lock while iterating. When syncing this means that we
end up trying to write out register values while holding the RCU read lock
which triggers lockdep issues since that is an atomic context but most
buses can't be used in atomic context. Pause the iteration and drop the
lock for each register we check to avoid this.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230523-regcache-maple-sync-lock-v1-1-530e4d68dfab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire code as it is only supports Bulk register writes and
it does not support multi-register writes.
Any drivers that set can_multi_write and use regmap_multi_reg_write() will
easily endup with programming the hardware incorrectly without any errors.
So, add this check in bus code to be able to validate the drivers config.
Fixes: 522272047d ("regmap: sdw: Remove 8-bit value size restriction")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154747.5429-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace one of bcache's lockdep_set_novalidate_class() usage with the
newly introduced custom lock nesting annotation.
[peterz: changelog]
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Coly Li <colyli@suse.de>
Link: https://lkml.kernel.org/r/20230509195847.1745548-2-kent.overstreet@linux.dev
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4skACgkQJNaLcl1U
h9Cl2gf8CnINVsSuzSgRqvpaxSpsEufghFJrlVtNPJxJz6z+1X+sz/bsq3ceuIWl
56kJ9V0FgdcFJn8PtzJWSMvY/iwyMjAVrCl7cPqPlEIRrelQUihEteDQiL+lGrPn
m0zkFWywW+r+KuzgoEosqL6/cDx7iR2NsELm/z/6aobsJRwVii7DigGAym9TNvwf
dKvxy3uSX+XbCR7BTadO4wn4iHZ0/BkgYxUu4KckTgFDqHQHwrnbZNLhr0w214el
bQuQOD0o6n8ZhBabOYv6j+TpwMO9qI/PjqJtn+fOZRi4pSmF1HlHL+8HLbukzblA
FcsQJdXyKNzEbgHKTamOul9hgx4q4w==
=H2J9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
On SB cards the number of captured channels is derived from the voice
mask mixer control. But for E-MU cards this wasn't actually "wired up",
so changing the mask would simply mess up the recording.
We could fix that, but the channel routing through the FPGA makes the
masking redundant. So instead we hide the control, and let the user
specify the PCM channel count the traditional way.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hardware can deal with primes up to 7 and power-of-two multiples
thereof; the limitation is reflected by the possible buffer sizes.
Note that setting the voice mask will not allow more than 16 channels
even on Sound Blaster Audigy anymore, as 32 seems a bit excessive (the
code overall appears to think so, just not in this case).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to specify that the hardware supports non-standard rates, as
otherwise the sound core creates a constraint which limits the rate to
the specified standard rates. That also made the rate constraint we were
already adding meaningless.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The buffer size register sets the size of the whole buffer, not just one
period. We actually handled it like that, except that the constraint was
set on the wrong parameter. The period size is implicitly constrained by
the buffer size and the fixed period count of 2.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make the help text for CRYPTO_STATS explicitly mention that it reduces
the performance of the crypto API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:
In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
173 | #define NX_DEBUGFS_INIT(drv) (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
573 | NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
174 | #define NX_DEBUGFS_FINI(drv) (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
793 | NX_DEBUGFS_FINI(&nx_driver);
Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.
Fixes: ae0222b728 ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c88 ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have no device-specific data for fsl,imx25-rngb. There's no need to
set .data = NULL, this is the default.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark the imx_rngc_probe function as __init.
There's no need to support hotplugging in the imx-rngc driver. We use
module_platform_driver_probe, the probe function will only be called at
startup.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rewrite the defines for register bits to use BIT(x) instead of writing
out the 32-bit number. This makes it easier to compare the code with the
register descriptions in the reference manual.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the mechanism from bitfield.h to read the rng type field in the
version_id register. This makes the code a tiny bit simpler.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "level" field in the status register contains the number of random
bytes that are available in the FIFO. Use GENMASK to extract this field.
We only want to check if level is 0 or if we can read another byte.
There's no need for the shift or the level variable.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some shash algorithms are so simple that they don't have an init_tfm
function. These can be cloned trivially. Check this before failing
in crypto_clone_shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow cmac to be cloned. The underlying cipher needs to support
cloning by not having a cra_init function (all implementations of
aes that do not require a fallback can be cloned).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow simple ciphers to be cloned, if they don't have a cra_init
function. This basically rules out those ciphers that require a
fallback.
In future simple ciphers will be eliminated, and replaced with a
linear skcipher interface. When that happens this restriction will
disappear.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the modern init_tfm/exit_tfm interface instead of the obsolete
cra_init/cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc warns if prototypes are only visible to the caller but
not the callee:
crypto/aegis128-neon-inner.c:134:6: warning: no previous prototype for 'crypto_aegis128_init_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:164:6: warning: no previous prototype for 'crypto_aegis128_update_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:221:6: warning: no previous prototype for 'crypto_aegis128_encrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:270:6: warning: no previous prototype for 'crypto_aegis128_decrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:316:5: warning: no previous prototype for 'crypto_aegis128_final_neon' [-Wmissing-prototypes]
The prototypes cannot be in the regular aegis.h, as the inner neon code
cannot include normal kernel headers. Instead add a new header just for
the functions provided by this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We use independent voices for the channels, so we need to make an effort
to ensure that they are actually in sync.
The hardware doesn't provide atomicity, so we may need to retry a few
times, due to NMIs, PCI contention, and the wrong phase of the moon.
Solution inspired by kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For unclear reasons, the extra voice was set up with half the buffer
size instead of the period size. Commit 27ae958cf6 ("emu10k1 driver -
add multichannel device hw:x,3 [2-8/8]") mentions half-loop interrupts,
so maybe this was an artifact of an earlier iteration of the patch.
While at it, also fix periods_min of the regular playback - one period
makes just no sense.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GFNI routines in the AVX version of the ARIA implementation now use
explicit VMOVDQA instructions to load the constant input vectors, which
means they must be 16 byte aligned. So ensure that this is the case, by
dropping the section split and the incorrect .align 8 directive, and
emitting the constants into the 16-byte aligned section instead.
Note that the AVX2 version of this code deviates from this pattern, and
does not require a similar fix, given that it loads these contants as
8-byte memory operands, for which AVX2 permits any alignment.
Cc: Taehee Yoo <ap420073@gmail.com>
Fixes: 8b84475318 ("crypto: x86/aria-avx - Do not use avx2 instructions")
Reported-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Tested-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmRqh6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXr0H/05UPv+bGw0xIFkj
5sE/uAsEbcQFFm8nsK9/03PUXGpYGNvDS2HO2rfsV0KNJSQDAS1TvXkh3D1S0v6D
ae28lkSl3Nn7YcOQGtdHZp2tSWlP0N0OE6tJlDzM/Q6AcbeoBHlVCg5EJzgd+op6
ScJwUmlwot2jZlYo6UTelr2v0j+C1Hj/t+sqTLY4bqXEybNrJmJDYhRayiqTps+h
+ypOSWdg8paq6UZBoYz0PiomV+E2gXvXtSeVtST9QmpGK9RwvglLB/wkbl+sYNW2
KbAZVrh/Orcm+bKguwf357pwc1Z59aI8/uFgOO8Om5nb4WrE/q7PNyxAHqAzxZDD
UyGwk+g=
=ZihJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4McACgkQJNaLcl1U
h9AzzQf/Yt6NM3mkqnyRCnn+mT7KHZbnv78l64SCeRYBqppCivOM/VelHgzASnrt
bLX4e1+iN0dIpHovVP3LDbama0bM9KyW8/AK4kohNes77RKccme2VWndtVLYDhP0
Kcg4n0tleuZIN+K85zFsZHVz/2O68kS/Dy3YttvcQIMg53cn5GH5Shhf4LUKbO8p
araIPft6ODavAvzsr4P8ewgFu1wc+kllzluFtP9uQRhOqRnvMG+THteu7YXqs49I
s6TW0sQjSORM2/BRkVk4iAM8bSFq7kLc92A/COed081rt5j5p7b4GCNTTL95/7QR
Z2PfcNEVcV4unRjVmK24BEAMK1yruQ==
=tuZB
-----END PGP SIGNATURE-----
spi: Merge up v6.4-rc3
Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmRqh6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXr0H/05UPv+bGw0xIFkj
5sE/uAsEbcQFFm8nsK9/03PUXGpYGNvDS2HO2rfsV0KNJSQDAS1TvXkh3D1S0v6D
ae28lkSl3Nn7YcOQGtdHZp2tSWlP0N0OE6tJlDzM/Q6AcbeoBHlVCg5EJzgd+op6
ScJwUmlwot2jZlYo6UTelr2v0j+C1Hj/t+sqTLY4bqXEybNrJmJDYhRayiqTps+h
+ypOSWdg8paq6UZBoYz0PiomV+E2gXvXtSeVtST9QmpGK9RwvglLB/wkbl+sYNW2
KbAZVrh/Orcm+bKguwf357pwc1Z59aI8/uFgOO8Om5nb4WrE/q7PNyxAHqAzxZDD
UyGwk+g=
=ZihJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4J4ACgkQJNaLcl1U
h9DdwAf9G2RRwBf09X767dqIr41cgEG2NWTVX6/4cnFBZhM2uibVpSXZGOd9D+JX
j+wo9gIXYfLlOA5p2AJyxTy5310UZCqea+k9kZ9pFv1gkQlZrGcsvDERNWsWj7Ub
i2bNQyFE54SEfAPNQYtK/Jr5ZOW6/vn0XKALXjosImm03khTCas7zh+YyEJVftbL
ENS/DCCDwpVi54Eud+gN3CHwBIQus3s8c0nVqXOik4teSP2Bo4PFR3LE2zhZxdM0
w9JWSCDjtiPd2tQ5hQ+FokTeJwEFX1JVWIwvfOUeUabaxB5jrDmfFafi91HUwi+W
ZWkWQ+d1oIEAkuAUySUaNQsD01UcqA==
=ywFe
-----END PGP SIGNATURE-----
regulator: Merge up v6.4-rc3
Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.
Fixes compilation issues with older GCC versions and Clang after
changes introduced in commit 6810bb3902 ("drm/panel: Add Samsung
S6D7AA0 panel controller driver"). Tested with GCC 13.1.1, GCC 6.4.0
and Clang 16.0.3.
Fixes the following errors with Clang:
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_lsl080al02_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_lsl080al03_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_ltl101at01_mode,
^~~~~~~~~~~~~~~~~~~~~~~
3 errors generated.
Fixes the following errors with GCC:
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not constant
.drm_mode = s6d7aa0_lsl080al02_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: note: (near initialization for 's6d7aa0_lsl080al02_desc.drm_mode')
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not constant
.drm_mode = s6d7aa0_lsl080al03_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: note: (near initialization for 's6d7aa0_lsl080al03_desc.drm_mode')
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not constant
.drm_mode = s6d7aa0_ltl101at01_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: note: (near initialization for 's6d7aa0_ltl101at01_desc.drm_mode')
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/20230523180212.GA1401867@dev-arch.thelio-3990X
Reported-by: kernelci.org bot <bot@kernelci.org>
Link: https://lore.kernel.org/llvm/646c6def.a70a0220.58c1a.903d@mx.google.com
Fixes: 6810bb3902 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524084324.11840-1-aweber.kernel@gmail.com
The current implementation uses a static bitmap for interrupt descriptor
allocation and a radix tree to pointer store the pointer for lookup.
However, the size of the bitmap is constrained by the build time macro
MAX_SPARSE_IRQS, which may not be sufficient to support high-end servers,
particularly those with GICv4.1 hardware, which require a large interrupt
space to cover LPIs and vSGIs.
Replace the bitmap and the radix tree with a maple tree, which not only
stores pointers for lookup, but also provides a mechanism to find free
ranges. That removes the build time hardcoded upper limit.
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230519134902.1495562-4-sdonthineni@nvidia.com
Move the open coded sparse bitmap handling into helper functions as
a preparatory step for converting the sparse interrupt management
to a maple tree.
No functional change.
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230519134902.1495562-3-sdonthineni@nvidia.com
The current implementation utilizes a bitmap for managing interrupt resend
handlers, which is allocated based on the SPARSE_IRQ/NR_IRQS macros.
However, this method may not efficiently utilize memory during runtime,
particularly when IRQ_BITMAP_BITS is large.
Address this issue by using an hlist to manage interrupt resend handlers
instead of relying on a static bitmap memory allocation. Additionally, a
new function, clear_irq_resend(), is introduced and called from
irq_shutdown to ensure a graceful teardown of the interrupt.
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230519134902.1495562-2-sdonthineni@nvidia.com
Jiri Pirko says:
====================
devlink: small port_new/del() cleanup
This patchset cleans up couple of leftovers after recent devlink locking
changes. Previously, both port_new/dev() commands were called without
holding instance lock. Currently all devlink commands are called with
instance lock held.
The first patch just removes redundant port notification.
The second one removes couple of outdated comments.
The last patch changes port_dev() to have devlink_port pointer as an arg
instead of port_index, which makes it similar to the rest of port
related ops.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All commands are called holding instance lock. Remove the outdated
comment that says otherwise.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ntfs_mft_data_extend_allocation_nolock(), if an error condition occurs
prior to 'ctx' being set to a non-NULL value, avoid dereferencing the NULL
'ctx' pointer in error handling.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
