Interrupt context is statically allocated at the time interrupts
are allocated. Following allocation, the context is managed by
directly accessing the elements of the array using the vector
as index. The storage is released when interrupts are disabled.
It is possible to dynamically allocate a single MSI-X interrupt
after MSI-X is enabled. A dynamic storage for interrupt context
is needed to support this. Replace the interrupt context array with an
xarray (similar to what the core uses as store for MSI descriptors)
that can support the dynamic expansion while maintaining the
custom that uses the vector as index.
With a dynamic storage it is no longer required to pre-allocate
interrupt contexts at the time the interrupts are allocated.
MSI and MSI-X interrupt contexts are only used when interrupts are
enabled. Their allocation can thus be delayed until interrupt enabling.
Only enabled interrupts will have associated interrupt contexts.
Whether an interrupt has been allocated (a Linux irq number exists
for it) becomes the criteria for whether an interrupt can be enabled.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230404122444.59e36a99.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/40e235f38d427aff79ae35eda0ced42502aa0937.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enabling and disabling of an interrupt involves several steps
that can fail. Cleanup after failure is done when the error
is encountered, resulting in some repetitive code.
Support for dynamic contexts will introduce more steps during
interrupt enabling and disabling.
Transition to centralized exit path in preparation for dynamic
contexts to eliminate duplicate error handling code.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/72dddae8aa710ce522a74130120733af61cffe4d.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Interrupt context storage is statically allocated at the time
interrupts are allocated. Following allocation, the interrupt
context is managed by directly accessing the elements of the
array using the vector as index.
It is possible to allocate additional MSI-X vectors after
MSI-X has been enabled. Dynamic storage of interrupt context
is needed to support adding new MSI-X vectors after initial
allocation.
Replace direct access of array elements with pointers to the
array elements. Doing so reduces impact of moving to a new data
structure. Move interactions with the array to helpers to
mostly contain changes needed to transition to a dynamic
data structure.
No functional change intended.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/eab289693c8325ede9aba99380f8b8d5143980a4.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
User space provides the vector as an unsigned int that is checked
early for validity (vfio_set_irqs_validate_and_prepare()).
A later negative check of the provided vector is not necessary.
Remove the negative check and ensure the type used
for the vector is consistent as an unsigned int.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/28521e1b0b091849952b0ecb8c118729fc8cdc4f.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_msi_disable() releases all previously allocated state
associated with each interrupt before disabling MSI/MSI-X.
vfio_msi_disable() iterates twice over the interrupt state:
first directly with a for loop to do virqfd cleanup, followed
by another for loop within vfio_msi_set_block() that removes
the interrupt handler and its associated state using
vfio_msi_set_vector_signal().
Simplify interrupt cleanup by iterating over allocated interrupts
once.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/837acb8cbe86a258a50da05e56a1f17c1a19abbe.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
While doing my research to improve the xpad device names I noticed
that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013,
so that Razer Sabertooth instance looked wrong and very suspect to
me. I didn't see any mention in the official drivers, either.
After doing more research, it turns out that the xpad list
is used by many other projects (like Steam) as-is [1], this
issue was reported [2] and Valve/Sam Lantinga fixed it [3]:
[1]: dcc5eef0e2/src/joystick/controller_type.h (L251)
[2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/
[3]: https://hg.libsdl.org/SDL/rev/29809f6f0271
(With multiple Internet users reporting similar issues, not linked here)
After not being able to find the correct VID/PID combination anywhere
on the Internet and not receiving any reply from Razer support I did
some additional detective work, it seems like it presents itself as
"Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00.
Leaving us with this:
* Razer Sabertooth (1689:fe00)
* Razer Sabertooth Elite (24c6:5d04)
* Razer DeathAdder 2013 (1532:0037) [note: not a gamepad]
So, to sum things up; remove this conflicting/duplicate entry:
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
As the real/correct one is already present there, even if
the Internet as a whole insists on presenting it as the
Razer Sabertooth Elite, which (by all accounts) is not:
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
Actual change in SDL2 referencing this kernel issue:
e5e5416975
For more information of the device, take a look here:
https://github.com/xboxdrv/xboxdrv/pull/59
You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt
Fixes: f554f619b7 ("Input: xpad - sync device IDs with xboxdrv")
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
All existing boards using RK3588/RK3588s use RK806 PMICs. This series is now
the main blocker for full upstream support of those boards and it would be good
to have it merged for 6.5 :) The patches have been tested on multiple different
platforms and are mainly missing an Ack from Mark or Liam for the rk808-regulator
changes.
Merging must happen through a single tree, since the pinctrl and regulator
drivers rely on the register definitions from the include file added by the MFD
patch. My suggested merge strategy is that Lee creates an immutable branch for
the regulator/pinctrl tree once all Acks have been collected.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The patch series includes a kselftest fix and changes for extending
driver capability to support more use cases.
Add a selftest demonstrating using detach-mounted BPF FS using new mount
APIs, and pinning and getting BPF map using such mount. This
demonstrates how something like container manager could setup BPF FS,
pin and adjust all the necessary objects in it, all before exposing BPF
FS to a particular mount namespace.
Also add a few subtests validating all meaningful combinations of
path_fd and pathname. We use mounted /sys/fs/bpf location for these.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-5-andrii@kernel.org
Add path_fd support for bpf_obj_pin() and bpf_obj_get() operations
(through their opts-based variants). This allows to take advantage of
new kernel-side support for O_PATH-based pin/get location specification.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the
queueing order - is needed, an ordered workqueue should be used which can
be created with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements,
this isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not necessary, please let me know. I'll drop the conversion
and instead add a comment noting the fact to reduce confusion while
conversion is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ming Qian <ming.qian@nxp.com>
Cc: Shijie Qin <shijie.qin@nxp.com>
Cc: Zhou Peng <eagle.zhou@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix cifs_limit_bvec_subset() so that it limits the span to the maximum
specified and won't return with a size greater than max_size.
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Cc: stable@vger.kernel.org # 6.3
Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
We are currently synchronizing every time the data timestamp with
the IT timestamp, leading to system jitter jamming timestamps.
To fix that and keep it simple, let's just synchronize when the
delta is bigger than the acceptable jitter, and keep
synchronization at the jitter value.
The result is much stable timestamps reflecting better the real
physical value. Example @50Hz delta timestamp,
* before: 20.123ms, 19.721ms, 20.023ms, 20.353ms, 19.821ms, ...
* after: 20.173ms, 20.173ms, 20.173ms, 20.40ms, 20.173ms, ...
Refactorize code and delete the unnecessary handling of multiple
FIFO data.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20230522093210.817212-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.
Add initial support for the ROHM BU27008 color sensor.
- raw_read() of RGB and clear channels
- triggered buffer w/ DRDY interrtupt
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/2594162f0e44148cffb1fb05f1d6edfde6bd11bc.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new generic iio_validate_own_trigger() can be used as
validate_trigger callback for verifying the used trigger belongs to same
device as the iio_dev.
Use the generic function instead of rolling own one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/cbd585e4787f62dc1a343a51b629ce73dd7d5426.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some triggers can only be attached to the IIO device that corresponds to
the same physical device. Implement generic helper which can be used as
a validate_trigger callback for such devices.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/51cd3e3e74a6addf8d333f4a109fb9c5a11086ee.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.
Add BU27008 dt-bindings.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/f24196e11ee73511312b629daa20c7d783d8bf6c.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for MLX90615 Infra Red Thermometer, which seems to be
the predecesor of MLX90614 . There are significant differences in
the register layout compared to MLX90614, but the functionality
of the device is virtually identical.
The following differences have been identified:
- RAM/EEPROM/SLEEP access opcodes are different
- RAM/EEPROM registers are at different offsets
- EEPROM emissivity and configuration registers are at different offsets
- EEPROM configuration register bits are shuffled around
- EEPROM emissivity settings are 14 bit on MLX90615 , 16 bit on MLX90614
- MLX90615 can only ever support one sensor, MLX90614 could support two
- FIR filter is set to fixed settings on MLX90615
- IIR filter coefficients are different
This patch fills in the MLX90615 specific description and quirk handling.
The IIR filter coefficients were provided by Melexis as follows:
0b0000 - Forbidden value
0b0001 - 100% - settling time = refresh rate = 205ms (around 5Hz)
0b0010 - 50% - settling time = 2050ms (around 0.5Hz)
0b0011 - 33% - settling time = 36900ms (around 0.3Hz)
0b0100 - 25% - settling time = 5125ms (around 0.2Hz)
0b0101 - 20% - settling time = 6355ms (around 0.15Hz)
0b0110 - 17% - settling time = 7790ms (around 0.13Hz)
0b0111 - 14% - settling time = 9225ms (around 0.1Hz)
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20230510102251.10118-6-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Factor out all the differences between MLX90614 and other similar chips
into a structure which describes the chip and allows abstracting out the
differences from the driver code. No functional change.
This patch moves all the RAM and EEPROM IO opcodes into the descriptor
structure and combines them, instead of combining the opcode and offset
in macros.
Acked-by: Crt Mori <cmo@melexis.com>
Tested-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-5-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MLX90614_CONST_EMISSIVITY_RESOLUTION can be calculated from
MLX90614_CONST_RAW_EMISSIVITY_MAX, perform the calculation inline
and drio the MLX90614_CONST_EMISSIVITY_RESOLUTION.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20230510102251.10118-4-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To simplify addition of support for new parts, drop unused register macros.
No functional change.
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-3-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sort the headers alphabetically. No functional change.
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document support for MLX90615 Infra Red Thermometer, which seems to
be the predecesor of MLX90614 . There are significant differences in
the register layout compared to MLX90614, but the functionality of
the device is virtually identical.
Acked-by: Crt Mori <cmo@melexis.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check physical PFN is valid before converting the PFN to a struct page
pointer to be returned to caller of vfio_pin_pages().
vfio_pin_pages() pins user pages with contiguous IOVA.
If the IOVA of a user page to be pinned belongs to vma of vm_flags
VM_PFNMAP, pin_user_pages_remote() will return -EFAULT without returning
struct page address for this PFN. This is because usually this kind of PFN
(e.g. MMIO PFN) has no valid struct page address associated.
Upon this error, vaddr_get_pfns() will obtain the physical PFN directly.
While previously vfio_pin_pages() returns to caller PFN arrays directly,
after commit
34a255e676 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()"),
PFNs will be converted to "struct page *" unconditionally and therefore
the returned "struct page *" array may contain invalid struct page
addresses.
Given current in-tree users of vfio_pin_pages() only expect "struct page *
returned, check PFN validity and return -EINVAL to let the caller be
aware of IOVAs to be pinned containing PFN not able to be returned in
"struct page *" array. So that, the caller will not consume the returned
pointer (e.g. test PageReserved()) and avoid error like "supervisor read
access in kernel mode".
Fixes: 34a255e676 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()")
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230519065843.10653-1-yan.y.zhao@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds support for handling background operations, as defined in
the CXL 3.0 spec. Commands that can take too long (over ~2 seconds)
can run in the background asynchronously (to the hardware).
The driver will deal with such commands synchronously, blocking all
other incoming commands for a specified period of time, allowing
time-slicing the command such that the caller can send incremental
requests to avoid monopolizing the driver/device. Any out of sync
(timeout) between the driver and hardware is just disregarded as
an invalid state until the next successful submission. Such timeouts
are considered a rare occurrence, either a real device problem or a
driver issue that needs to reduce the size of the background operation
to fit the timeout.
On devices where mbox interrupts are supported, this will still use
a poller that will wakeup in the specified wait intervals. The irq
handler will simply awake the blocked cmd, which is also safe vs a
task that is either waking (timing out) or already awoken. Similarly
any irq setup error during the probing falls back to polling, thus
avoids unnecessarily erroring out.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-5-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out common functionality/semantics for cxl shared interrupts
into a new helper on top of devm_request_irq().
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-4-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Move the cxl_alloc_irq_vectors() call further up in the probing
in order to allow for mailbox interrupt usage. No change in
semantics.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-3-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The rcuwait utility provides an efficient and safe single
wait/wake mechanism. It is used in situations where queued
wait is the wrong semantics, and often too bulky. For example,
cases where the wait is already done under a lock.
In the past, rcuwait has been extended to support beyond only
uninterruptible sleep, and similarly, there are users that can
benefit for the addition of timeouts.
As such, tntroduce rcuwait_wait_event_timeout(), with semantics
equivalent to calls for queued wait counterparts.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-2-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Convert the RT1016 Stereo Audio Amplifier bindings to DT schema
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Link: https://lore.kernel.org/r/ZFUFAmBJXvkQAG7m@yoga
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a cut and paste bug so this code was returning the wrong
variable. It should have been "ddata->hold_boot_rst" instead of
"ddata->rst".
Fixes: de598695a2 ("remoteproc: stm32: Allow hold boot management by the SCMI reset controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/6f457246-6446-42cb-81ae-d37221d726b1@kili.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will enable multicore support on MTL platforms similarly
to other Intel platforms.
The TGL patch is included to simplify the core_put implementation.
Multicore support can be enabled by updated topologies, with current set of
tplg files this series is not introducing any runtime change.
The object context type `fs`, not to be confused with the well used
object context type `fscon`, was introduced in the initial git commit
1da177e4c3 ("Linux-2.6.12-rc2") but never actually used since.
The paper "A Security Policy Configuration for the Security-Enhanced
Linux" [1] mentions it under `7.2 File System Contexts` but also states:
Currently, this configuration is unused.
The policy statement defining such object contexts is `fscon`, e.g.:
fscon 2 3 gen_context(system_u:object_r:conA_t,s0) \
gen_context(system_u:object_r:conB_t,s0)
It is not documented at selinuxproject.org or in the SELinux notebook
and not supported by the Reference Policy buildsystem - the statement is
not properly sorted - and thus not used in the Reference or Fedora
Policy.
Print a warning message at policy load for each such object context:
SELinux: void and deprecated fs ocon 02:03
This topic was initially highlighted by Nicolas Iooss [2].
[1]: https://media.defense.gov/2021/Jul/29/2002815735/-1/-1/0/SELINUX-SECURITY-POLICY-CONFIGURATION-REPORT.PDF
[2]: https://lore.kernel.org/selinux/CAJfZ7=mP2eJaq2BfO3y0VnwUJaY2cS2p=HZMN71z1pKjzaT0Eg@mail.gmail.com/
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: tweaked deprecation comment, description line wrapping]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add tests for the new "--per-cache" option in 'perf stat' for CSV and
JSON generation as well as for the JSON linting.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-6-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When aggregating based on cache-topology, in addition to the aggregation
mode, knowing the cache level at which data is aggregated is necessary
to ensure consistency when running 'perf stat record' and later 'perf
stat report'.
Save the cache level for aggregation as a part of the env data that can
be later retrieved when running perf stat report.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-4-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Processors based on chiplet architecture, such as AMD EPYC and Hygon do
not expose the chiplet details in the sysfs CPU topology information.
However, this information can be derived from the per CPU cache level
information from the sysfs.
'perf stat' has already supported aggregation based on topology
information using core ID, socket ID, etc. It'll be useful to aggregate
based on the cache topology to detect problems like imbalance and
cache-to-cache sharing at various cache levels.
This patch lays the foundation for aggregating data in 'perf stat' based
on the processor's cache topology. The cmdline option to aggregate data
based on the cache topology is added in Patch 4 of the series while this
patch sets up all the necessary functions and variables required to
support the new aggregation option.
The patch also adds support to display per-cache aggregation, or save it
as a JSON or CSV, as splitting it into a separate patch would break
builds when compiling with "-Werror=switch-enum" where the compiler will
complain about the lack of handling for the AGGR_CACHE case in the
output functions.
Committer notes:
Don't use perf_stat_config in tools/perf/util/cpumap.c, this would make
code that is in util/, thus not really specific to a single builtin, use
a specific builtin config structure.
Move the functions introduced in this patch from
tools/perf/util/cpumap.c since it needs access to builtin specific
and is not strictly needed to live in the util/ directory.
With this 'perf test python' is back building.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-3-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes: cd95aad557 ("Drivers: hv: vmbus: handle various crash scenarios")
Cc: stable@vger.kernel.org
Reported-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Originally, lineout playback source can only be DAC_3RD. Some SoC
masters only support stereo MTKAIF outputs, so lineout path can't be
used in such case.
MTKAIF connections are as follows.
MOSI0 -> DAC_L
MOSI1 -> DAC_R
MOSI2 -> DAC_3rd
In the patch, lineout playback source can be chosen between DAC_L and
DAC_3rd, so sound can be outputted via lineout even though SoC only
supports stereo MTKAIF outputs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kselftest tries to read/write the default value. The default register
value of playback gain is 0x1F(mute), but max gain we specified is 0x12.
The range of the control is 0x0~0x12 and mute(0x1F) is only used in the
driver internally. To solve the problem, implement a new callback
mt6359_get_playback_volsw to report user configured volume instead of
the register value.
In addition, update max of "Headset Volume" to 0x12, so it can match the
maximum seen on latest data sheet.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are three output data pins MISO0, MISO1 and MISO2 for mt6359.
UL_SRC should be enabled when MISO0 or MISO1 is used, and UL_SRC_34
should be enabled when MISO2 is used.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
