report_extable_warnings() prints "from" in a pretty form, but we know
it is always located in the __ex_table section, i.e. a collection of
struct exception_table_entry.
It is very likely to fail to get the symbol name and ends up with
meaningless message:
... in reference from the (unknown reference) (unknown) to ...
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
find_extable_entry_size() is completely broken. It has awesome comments
about how to calculate sizeof(struct exception_table_entry).
It was based on these assumptions:
- struct exception_table_entry has two fields
- both of the fields have the same size
Then, we came up with this equation:
(offset of the second field) * 2 == (size of struct)
It was true for all architectures when commit 52dc0595d5 ("modpost:
handle relocations mismatch in __ex_table.") was applied.
Our mathematics broke when commit 548acf1923 ("x86/mm: Expand the
exception table logic to allow new handling options") introduced the
third field.
Now, the definition of exception_table_entry is highly arch-dependent.
For x86, sizeof(struct exception_table_entry) is apparently 12, but
find_extable_entry_size() sets extable_entry_size to 8.
I could fix it, but I do not see much value in this code.
extable_entry_size is used just for selecting a slightly different
error message.
If the first field ("insn") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
it is not possible for the kernel to fault
at that address. Something is seriously wrong
and should be fixed.
If the second field ("fixup") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
Merge the two error messages rather than adding even more complexity.
Change fatal() to error() to make it continue running and catch more
possible errors.
Fixes: 548acf1923 ("x86/mm: Expand the exception table logic to allow new handling options")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The section mismatch check relies on the relocation entries.
For REL, the addend value is implicit, so we need some code to compute
it. Currently, EM_386, EM_ARM, and EM_MIPS are supported. This commit
makes sure we covered all the cases.
I believe the other architectures use RELA, where the explicit r_addend
field exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As a follow up to the series allowing DTB overlays to built from .dtso
files. Now that all overlays have been renamed, remove the ability to
build from overlays from .dts files to prevent any files with the old
name from accidental being added.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
* Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
* FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
* Add workaround for Apple SEIS brokenness to a new SoC
* Random comment fixes
x86:
* add MSR_IA32_TSX_CTRL into msrs_to_save
* fixes for XCR0 handling in SGX enclaves
Generic:
* Fix vcpu_array[0] races
* Fix race between starting a VM and "reboot -f"
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRp0WIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqVwf+OFayNPpURAFqfrOuISYW7hoCL24+
sCtXyVv4Ei0np1vGekit2h/m8GmxO12xEBibcFeYj+YQItIqu9HvC08fRxAKaMeE
N3p9iLuS1zcM3cEuZpg0r6QN+pKybttdadl70yho43CtagEM4FmB7dgyAo9AhyXk
pZUaVfoO6beBQ/J6A6V/Q5xlue1LvHk1+K4rmNcYVTYn6ZOd+yYgvqng1nv5/h9b
0HgW0aUWkEHAB67/sSnUUro707loMNTowsZlMCtgDk4Fzf8RwQ7qc8lClLk1UPjJ
DHB6Hif9F0Q5mkrwn+c7xyVlKARaY6/FOshS2Q620q19+4fq5fUD9HgjrQ==
=ARzH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available.
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue'
type verification. This feature is built only with BUILD_BPF_SKEL=1.
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not system
ones that may be old and not have things like 'union perf_sample_weight'.
- Add system include paths to BPF builds to pick things missing in the headers
included by clang -target bpf.
- Update various header copies with the kernel sources.
- Change divide by zero and not supported events behavior to show 'nan'/'not
counted' in 'perf stat' output. This happens when using things like
'perf stat -M TopdownL2 true', involving JSON metrics.
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test.
- Avoid segv with 'perf stat --topdown' for metrics without a group.
- Do not assume which events may have a PMU name, allowing the logic to keep an
AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'.
- Fix build with refcount checking on arm64, it was still accessing fields that
need to be wrapped so that the refcounted struct gets checked.
- Fix contextid validation in ARM's CS-ETM, so that older kernels without that
field can still be supported.
- Skip unsupported aggregation for stat events found in perf.data files in 'perf script'.
- Add stat test for record and script to check the previous problem.
- Remove needless debuginfod queries from 'perf test java symbol', this was
just making the test take a long time to complete.
- Address python SafeConfigParser() deprecation warning in 'perf test attr'.
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZGkUygAKCRCyPKLppCJ+
J8LGAP9qi9fvOt96aXLKHPn/op5KjmvnhZH3/Dj/XPnD8xRNOgD/cQu2D/h8zy9h
NAf0lnJZKiyBGwIrCp1i89snxklnxgA=
=Vztu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
available
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
'runqueue' type verification. This feature is built only with
BUILD_BPF_SKEL=1
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not
system ones that may be old and not have things like 'union
perf_sample_weight'
- Add system include paths to BPF builds to pick things missing in the
headers included by clang -target bpf
- Update various header copies with the kernel sources
- Change divide by zero and not supported events behavior to show
'nan'/'not counted' in 'perf stat' output.
This happens when using things like 'perf stat -M TopdownL2 true',
involving JSON metrics
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test
- Avoid segv with 'perf stat --topdown' for metrics without a group
- Do not assume which events may have a PMU name, allowing the logic to
keep an AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'
- Fix build with refcount checking on arm64, it was still accessing
fields that need to be wrapped so that the refcounted struct gets
checked
- Fix contextid validation in ARM's CS-ETM, so that older kernels
without that field can still be supported
- Skip unsupported aggregation for stat events found in perf.data files
in 'perf script'
- Add stat test for record and script to check the previous problem
- Remove needless debuginfod queries from 'perf test java symbol', this
was just making the test take a long time to complete
- Address python SafeConfigParser() deprecation warning in 'perf test
attr'
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
CTR_EL0 can often be used in userspace, and it would be nice if
KVM didn't have to emulate it unnecessarily.
While it isn't possible to trap the cache configuration registers
independently from CTR_EL0 in the base ARMv8.0 architecture, FEAT_EVT
allows these cache configuration registers (CCSIDR_EL1, CCSIDR2_EL1,
CLIDR_EL1 and CSSELR_EL1) to be trapped independently by setting
HCR_EL2.TID4.
Switch to using TID4 instead of TID2 in the cases where FEAT_EVT
is available *and* that KVM doesn't need to sanitise CTR_EL0 to
paper over mismatched cache configurations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515170016.965378-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Fix broken soft dirty tracking when using the Radix MMU (>= P9).
- Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards.
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling.
- Fix incorrect DMA address handling when using 2MB TCEs.
- Fix a bug in IOMMU table handling for SR-IOV devices.
- Fix the recent rework of IOMMU handling which left arch code calling clean
up routines that are handled by the IOMMU core.
- A few assorted build fixes.
Thanks to: Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason
Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy
Dunlap, Rob Herring.
-----BEGIN PGP SIGNATURE-----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=mz+r
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
* Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZGoEPAAKCRDdoc3SxdoY
dk1OAQCo3klTiCDydJ2FIOz7XO1UhSfbt+reIkMSd55iSztnZQD/Yk7h9MBzPyAk
X5c+bf66HGMpbUFO2SYXK5b1aRb8tAo=
=R0jk
-----END PGP SIGNATURE-----
Merge tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal
* tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZGnroAAKCRD3ErUQojoP
X8VOAP0XokcmGLqsBv0ED4y4sPFnDlrGuwnm9br+IVSd2BeSgwD/cJ2DrXBbRK12
p2wGannItDCv4K6dCYvsKSfG7avWbgw=
=0/H9
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A few small unspectacular fbdev fixes:
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb"
* tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Whitespace cleanups
fbdev: udlfb: Use usb_control_msg_send()
fbdev: udlfb: Fix endpoint check
fbdev: atyfb: Remove unused clock determination
fbdev: i810: include i810_main.h in i810_dvt.c
fbdev: fbmem: mark get_fb_unmapped_area() static
fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
-----BEGIN PGP SIGNATURE-----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=ZNmq
-----END PGP SIGNATURE-----
Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
Add myself as a maintainer for Honeywell mprls0025pa sensor.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/ZGNp+1uNAxi3uxjM@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Honeywell mprls0025pa is a series of pressure sensors.
Add initial I2C support.
Note:
- IIO buffered mode is supported
- SPI mode is not supported
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/ZGNp3SqyOJeEcLsj@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Honeywell mprls0025pa is a pressure sensor series. There are many
different models with different pressure ranges, units and transfer
functions.
The range and transfer function need to be set up in the dt. Therefore
new properties honeywell,pmin-pascal, honeywell,pmax-pascal,
honeywell,transfer-function are introduced.
Add dt-bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/ZGNpve4ux5KJ3BNQ@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmRpn+4ACgkQiiy9cAdy
T1F07gv/dvtE23DaAsTtOsXMzc2fQ9jyQiexgUUMWjYWeWJS06r2o3QMWsSV86QT
z645h6jYgUBeuWVFPF/h0WYjGn/C35Fy08SRuNSReNNahYbNh0A5fe+ic8AoA+f1
LWQYOqRkAaZdcfuOP2Cg2OiNDswxLln4L0eTlJu7Hrdi/xUM5qa66VmFfvfVsu3/
nUlV9KGV6lVoEJbD2Oy+9pfB/2ltgmauQqofXAh35BHSah8Q5U2E2QHHhyMwRBBc
qSINxSoNDDyoW5sCXxzgBPH23lzlMNo0tHVRSqPMtLypzoehzwHmkFJVuGv2F82n
Mj+pMD7As4d7/82IpmCMkhkOcUCRLa/d3gHqZMZVCFSXJ8tpTbRTBiiervJ3/94M
IYfZiBuKy6z2mYdE8sW0zXCXzYE9+iAgySER5Ey2IXlbCSN7N81lV2KE8E4jjKhM
Qoe5DL/AGSjDW0RFSOC7PPRpOqpc//PV2JpPmoYodV1i1nWq5dC1DhQcbXjg/r7c
0fABdS0y
=hi0y
-----END PGP SIGNATURE-----
Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two smb3 client fixes, both related to deferred close, and also for
stable:
- send close for deferred handles before not after lease break
response to avoid possible sharing violations
- check all opens on an inode (looking for deferred handles) when
lease break is returned not just the handle the lease break came in
on"
* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: drop reference to cfile before sending oplock break
SMB3: Close all deferred handles of inode in case of handle lease break
Rockchip RK3588J is the industrial-grade version of RK3588 SoC and
is operated with -40 °C to +85 °C temparature.
Add rk3588j specific dtsi for adding rk3588j specific operating points
and other changes to be add in future.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230516163454.997736-2-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.
Edgeble Neural Compute Module 6B(Neu6B) IO board is an industrial
form factor evaluation board from Edgeble AI.
Neu6B needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 6B(Neu6B) IO platform.
This patch add dt-bindings for Edgeble Neu6 Model B SoM based IO board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230516163454.997736-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3568 also features a RGA2 block. Add the necessary device tree
node.
Acked-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Link: https://lore.kernel.org/r/20230119-rk3568-rga-v1-2-43d4d14365e6@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a new compatible for the rk3568 Rockchip SoC, which also features an
RGA, which is called RGA2 in the TRM Part2. It is the same core as used
on the rk3288, which documents the same RGA2.
Specify a new compatible for the rk3568 to be able to handle unknown
SoC-specific differences in the driver.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Link: https://lore.kernel.org/r/20230119-rk3568-rga-v1-1-43d4d14365e6@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e062 ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The interconnect driver is (or soon will be) vital to many other
devices, as it's not a given that the bootloader will set up enough
bandwidth for us or that the values we come into are reasonable.
Promote the driver to core_initcall to ensure the consumers (i.e.
most "meaningful" parts of the SoC) can probe without deferrals.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-8-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Commit dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
relaxed the requirements around probing bus clocks. This was a decent
solution for making sure MSM8996 would still boot with old DTs, but
now that there's a proper fix in place that both old and new DTs
will be happy about, revert back to the safer variant of the
function.
Fixes: dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-7-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
For SMD RPM bus scaling to work, we need a pair of sleep-wake clocks.
The variable number of them we previously supported was only a hack
to keep the clocks required for QoS register access, but now that
these are separated, we can leave bus_clks to the actual bus clocks.
In cases where there is no actual bus scaling (such as A0NoC on MSM8996
and GNoC on SDM660 where the HLOS is only supposed to program the QoS
registers and the bus is either static or controlled remotely), allow
for no clock scaling with a boolean property.
Remove all the code related to allowing an arbitrary number of bus_clks,
replace the number by BUS_CLK_MAX (= 2) and guard the bus clock paths
to ensure they are not taken on non-scaling buses.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-6-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Some (but not all) providers (or their specific nodes) require
specific clocks to be turned on before they can be accessed. Failure
to ensure that results in a seemingly random system crash (which
would usually happen at boot with the interconnect driver built-in),
resulting in the platform not booting up properly.
Limit the number of bus_clocks to 2 (which is the maximum that SMD
RPM interconnect supports anyway) and handle non-scaling clocks
separately. Update MSM8996 and SDM660 drivers to make sure they do
not regress with this change.
This unfortunately has to be done in one patch to prevent either
compile errors or broken bisect.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230518195801.2556998-1-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This change adds methods in the XFRM-I input path that ensures that
policies are checked prior to processing of the subsequent decapsulated
packet, after which the relevant policies may no longer be resolvable
(due to changing src/dst/proto/etc).
Notably, raw ESP/AH packets did not perform policy checks inherently,
whereas all other encapsulated packets (UDP, TCP encapsulated) do policy
checks after calling xfrm_input handling in the respective encapsulation
layer.
Fixes: b0355dbbf1 ("Fix XFRM-I support for nested ESP tunnels")
Test: Verified with additional Android Kernel Unit tests
Test: Verified against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in b0355dbbf1,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes: b0355dbbf1 ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In gcc-13, the WORK_STRUCT_WQ_DATA_MASK constant is a signed 64-bit
type on 32-bit architectures because the enum definition has both
negative numbers and numbers above LONG_MAX in it:
kernel/workqueue.c: In function 'get_work_pwq':
kernel/workqueue.c:709:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
709 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
kernel/workqueue.c: In function 'get_work_pool':
kernel/workqueue.c:737:25: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
737 | return ((struct pool_workqueue *)
| ^
kernel/workqueue.c: In function 'get_work_pool_id':
kernel/workqueue.c:759:25: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
759 | return ((struct pool_workqueue *)
| ^
Change the enum definition to ensure all values can fit into
the range of 'unsigned long' on all architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Lai Jiangshan<jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Return type of iov_iter_get_pages2() is ssize_t instead of size_t, so
fix it.
Fixes: 981f95a571 ("ublk: cleanup ublk_copy_user_pages")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230520151134.459679-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1e8fed873e ("powerpc: drop ranges for definition of
ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for
ARCH_FORCE_MAX_ORDER.
However removing the ranges entirely causes some common work flows to
break. For example building a defconfig (which uses 64K pages), changing
the page size to 4K, and rebuilding used to work, because
ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges.
With the ranges removed it creates a kernel that builds but crashes at
boot:
kernel BUG at mm/huge_memory.c:470!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP hugepage_init+0x9c/0x278
LR do_one_initcall+0x80/0x320
Call Trace:
do_one_initcall+0x80/0x320
kernel_init_freeable+0x304/0x3ac
kernel_init+0x30/0x1a0
ret_from_kernel_user_thread+0x14/0x1c
The reasoning for removing the ranges was that some of the values were
too large. So take that into account and limit the maximums to 10 which
is the default max, except for the 4K case which uses 12.
Fixes: 1e8fed873e ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230519113806.370635-1-mpe@ellerman.id.au
If the dispcc uses CLK_OPS_PARENT_ENABLE (e.g. on QCM2290), CCF can try
enabling VCO before the rate has been programmed. This can cause clock
lockups and/or other boot issues. Program the VCO to the minimal PLL
rate if the read rate is 0 Hz.
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: f079f6d999 ("drm/msm/dsi: Add PHY/PLL for 8x96")
Patchwork: https://patchwork.freedesktop.org/patch/534813/
Link: https://lore.kernel.org/r/20230501011257.3460103-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In commit 7d8e9a9050 ("drm/msm/dsi: move DSI host powerup to modeset
time") the error handling with regards to dsi_mgr_bridge_power_on()
got a bit worse. Specifically if we failed to power the bridge on then
nothing would really notice. The modeset function couldn't return an
error and thus we'd blindly go forward and try to do the pre-enable.
In commit ec7981e6c6 ("drm/msm/dsi: don't powerup at modeset time
for parade-ps8640") we added a special case to move the powerup back
to pre-enable time for ps8640. When we did that, we didn't try to
recover the old/better error handling just for ps8640.
In the patch ("drm/msm/dsi: Stop unconditionally powering up DSI hosts
at modeset") we've now moved the powering up back to exclusively being
during pre-enable. That means we can add the better error handling
back in, so let's do it. To do so we'll add a new function
dsi_mgr_bridge_power_off() that's matches how errors were handled
prior to commit 7d8e9a9050 ("drm/msm/dsi: move DSI host powerup to
modeset time").
NOTE: Now that we have dsi_mgr_bridge_power_off(), it feels as if we
should be calling it in dsi_mgr_bridge_post_disable(). That would make
some sense, but doing so would change the current behavior and thus
should be a separate patch. Specifically:
* dsi_mgr_bridge_post_disable() always calls dsi_mgr_phy_disable()
even in the slave-DSI case of bonded DSI. We'd need to add special
handling for this if it's truly needed.
* dsi_mgr_bridge_post_disable() calls msm_dsi_phy_pll_save_state()
midway through the poweroff.
* dsi_mgr_bridge_post_disable() has a different order of some of the
poweroffs / IRQ disables.
For now we'll leave dsi_mgr_bridge_post_disable() alone.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/521059/
Link: https://lore.kernel.org/r/20230131141756.RFT.v2.3.I3c87b53c4ab61a7d5e05f601a4eb44c7e3809a01@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In commit 7d8e9a9050 ("drm/msm/dsi: move DSI host powerup to modeset
time"), we moved powering up DSI hosts to modeset time. This wasn't
because it was an elegant design, but there were no better options.
That commit actually ended up breaking ps8640, and thus was born
commit ec7981e6c6 ("drm/msm/dsi: don't powerup at modeset time for
parade-ps8640") as a temporary hack to un-break ps8640 by moving it to
the old way of doing things. It turns out that ps8640 _really_ doesn't
like its pre_enable() function to be called after
dsi_mgr_bridge_power_on(). Specifically (from experimentation, not
because I have any inside knowledge), it looks like the assertion of
"RST#" in the ps8640 runtime resume handler seems like it's not
allowed to happen after dsi_mgr_bridge_power_on()
Recently, Dave Stevenson's series landed allowing bridges some control
over pre_enable ordering. The meaty commit for our purposes is
commit 4fb912e5e1 ("drm/bridge: Introduce pre_enable_prev_first to
alter bridge init order"). As documented by that series, if a bridge
doesn't set "pre_enable_prev_first" then we should use the old ordering.
Now that we have the commit ("drm/bridge: tc358762: Set
pre_enable_prev_first") we can go back to the old ordering, which also
allows us to remove the ps8640 special case.
One last note is that even without reverting commit 7d8e9a9050
("drm/msm/dsi: move DSI host powerup to modeset time"), if you _just_
revert the ps8640 special case and try it out then it doesn't seem to
fail anymore. I spent time bisecting / debugging this and it turns out
to be mostly luck, so we still want this patch to make sure it's
solid. Specifically the reason it sorta works these days is because
we implemented wait_hpd_asserted() in ps8640 now, plus the magic of
"pm_runtime" autosuspend. The fact that we have wait_hpd_asserted()
implemented means that we actually power the bridge chip up just a wee
bit earlier and then the bridge happens to stay on because of
autosuspend and thus ends up powered before dsi_mgr_bridge_power_on().
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/521058/
Link: https://lore.kernel.org/r/20230131141756.RFT.v2.2.I4cfeab9d0e07e98ead23dd0736ab4461e6c69002@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the newly introduced usb_control_msg_send() instead of usb_control_msg()
when selecting the channel.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Helge Deller <deller@gmx.de>
Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZGj81w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymjHACfSNJWXivuDTI5KEAkUPLfi1zg5xUAn0x1Demd
NYV1GFn76O0Ijfs6JLll
=0YxQ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
serial: qcom-geni: fix enabling deactivated interrupt
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
serial: 8250_bcm7271: balance clk_enable calls
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
serial: 8250: Document termios parameter of serial8250_em485_config()
serial: Add support for Advantech PCI-1611U card
serial: 8250_exar: Add support for USR298x PCI Modems
The ssi_waketest() function definition causes a 'make W=1' warning
because the declaration is hidden away in ssi_protocol.c:
drivers/hsi/controllers/omap_ssi_core.c:147:6: error: no previous prototype for 'ssi_waketest'
Move it into a header file instead.
Fixes: dc7bf5d718 ("HSI: Introduce driver for SSI Protocol")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZGj97Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhBQCgmc/r5Kx4qBWrf32w6LbGzLC1KDUAoI79Ix7g
7SEM1fqaTWgnCC3gl/cB
=6AOH
-----END PGP SIGNATURE-----
Merge tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter"
* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
driver core: class: properly reference count class_dev_iter()
xhci: Fix incorrect tracking of free space on transfer rings
xhci-pci: Only run d3cold avoidance quirk for s2idle
usb-storage: fix deadlock when a scsi command timeouts more than once
usb: dwc3: fix a test for error in dwc3_core_init()
usb: typec: tps6598x: Fix fault at module removal
usb: gadget: u_ether: Fix host MAC address case
usb: typec: altmodes/displayport: fix pin_assignment_show
Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
usb: gadget: drop superfluous ':' in doc string
usb: dwc3: debugfs: Resume dwc3 before accessing registers
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: fix gadget mode suspend interrupt handler issue
usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
USB: usbtmc: Fix direction for 0-length ioctl control messages
thunderbolt: Clear registers properly when auto clear isn't in use
[ cmllamas: clean forward port from commit 015ac18be7 ("binder: fix
UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed
in mainline after the revert of commit a43cfc87ca ("android: binder:
stop saving a pointer to the VMA") as pointed out by Liam. The commit
log and tags have been tweaked to reflect this. ]
In commit 720c241924 ("ANDROID: binder: change down_write to
down_read") binder assumed the mmap read lock is sufficient to protect
alloc->vma inside binder_update_page_range(). This used to be accurate
until commit dd2283f260 ("mm: mmap: zap pages with read mmap_sem in
munmap"), which now downgrades the mmap_lock after detaching the vma
from the rbtree in munmap(). Then it proceeds to teardown and free the
vma with only the read lock held.
This means that accesses to alloc->vma in binder_update_page_range() now
will race with vm_area_free() in munmap() and can cause a UAF as shown
in the following KASAN trace:
==================================================================
BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0
Read of size 8 at addr ffff16204ad00600 by task server/558
CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2a0
show_stack+0x18/0x2c
dump_stack+0xf8/0x164
print_address_description.constprop.0+0x9c/0x538
kasan_report+0x120/0x200
__asan_load8+0xa0/0xc4
vm_insert_page+0x7c/0x1f0
binder_update_page_range+0x278/0x50c
binder_alloc_new_buf+0x3f0/0xba0
binder_transaction+0x64c/0x3040
binder_thread_write+0x924/0x2020
binder_ioctl+0x1610/0x2e5c
__arm64_sys_ioctl+0xd4/0x120
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Allocated by task 559:
kasan_save_stack+0x38/0x6c
__kasan_kmalloc.constprop.0+0xe4/0xf0
kasan_slab_alloc+0x18/0x2c
kmem_cache_alloc+0x1b0/0x2d0
vm_area_alloc+0x28/0x94
mmap_region+0x378/0x920
do_mmap+0x3f0/0x600
vm_mmap_pgoff+0x150/0x17c
ksys_mmap_pgoff+0x284/0x2dc
__arm64_sys_mmap+0x84/0xa4
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Freed by task 560:
kasan_save_stack+0x38/0x6c
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x4c
__kasan_slab_free+0x100/0x164
kasan_slab_free+0x14/0x20
kmem_cache_free+0xc4/0x34c
vm_area_free+0x1c/0x2c
remove_vma+0x7c/0x94
__do_munmap+0x358/0x710
__vm_munmap+0xbc/0x130
__arm64_sys_munmap+0x4c/0x64
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
[...]
==================================================================
To prevent the race above, revert back to taking the mmap write lock
inside binder_update_page_range(). One might expect an increase of mmap
lock contention. However, binder already serializes these calls via top
level alloc->mutex. Also, there was no performance impact shown when
running the binder benchmark tests.
Fixes: c0fd210178 ("Revert "android: binder: stop saving a pointer to the VMA"")
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver
Cc: <stable@vger.kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230519195950.1775656-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Timestamp reset is not done in the correct place. It must be done
before enabling buffer. The reason is that interrupt timestamping
is always happening when the chip is on, even if the
corresponding sensor is off. When the sensor restarts, timestamp
is wrong if you don't do a reset first.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230509152202.245444-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230516110038.2413224-13-schnelle@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reference iio.yaml schema from dtschema to allow already used
mount-matrix property:
msm8953-xiaomi-daisy.dtb: imu@6a: Unevaluated properties are not allowed ('mount-matrix' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230507173923.263741-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Renesas X9250 integrates four digitally controlled potentiometers.
On each potentiometer, the X9250T has a 100 kOhms total resistance and
the X9250U has a 50 kOhms total resistance.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230509160852.158101-3-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
