Fixes the following error in the docs build that occurs with recent
versions of Sphinx when parsing kerneldocs for a function with the
'__force' macro in its signature:
./include/linux/err.h:51: WARNING: Error in declarator or parameters
Error in declarator or parameters
Invalid C declaration: Expected identifier, got keyword: void [error at 35]
void * ERR_CAST (__force const void *ptr)
-----------------------------------^
Currently, almost all of the few in-signature occurrences of '__force'
are in the error pointer functions. Of those, ERR_CAST() is the only
one with kerneldocs, but the kerneldocs aren't even being used to
generate documentation. This change will allow all the error pointer
functions to be properly documented.
In addition to '__force', <linux/compiler_types.h> also defines
'__nocast', '__safe', and '__private'. These are not currently used in
any function signatures and do not need to be added to the docs config.
Signed-off-by: James Seo <james@equiv.tech>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230509175543.2065835-2-james@equiv.tech
The descriptions of certain KVM related kernel parameters can be
confusing. They state "Disable ...," which may make people think that
setting them to 1 will disable the associated feature when in fact the
opposite is true.
This commit addresses this issue by revising the descriptions of these
parameters by using "Control..." rather than "Enable/Disable...".
1==enabled or 0==disabled can be communicated by the description of
default value such as "1 (enabled)" or "0 (disabled)".
Also update the description of KVM's default value for kvm-intel.nested
as it is enabled by default.
Signed-off-by: Yan-Jie Wang <yanjiewtw@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230503081530.19956-1-yanjiewtw@gmail.com
Merge cpupower utility fixes for 6.4-rc3:
- Read TSC on each CPU right before reading MPERF so as to reduce the
potential time difference between the TSC and MPERF accesses and
improve the C0 percentage calculation (Wyes Karny).
- Fix a possible file handle leak and clean up the code in
sysfs_get_enabled() (Hao Zeng).
* pm-tools:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Information about intel_pstate active mode is added in the doc.
This operation mode could be used to set on the hardware when it's
not activated. Status of the mode could be checked from sysfs file
i.e., /sys/devices/system/cpu/intel_pstate/status.
The information is already available in cpu-freq/intel-pstate.txt
documentation.
Signed-off-by: Natesh Sharma <nsharma@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[jc: reformatted for width ]
Link: https://lore.kernel.org/r/20230427083706.49882-1-nsharma@redhat.com
This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor
-----BEGIN PGP SIGNATURE-----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=eD91
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fixes for 6.4-rc3 from Shuah Khan:
"This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor"
* tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
This was using the wrong variable, "r", instead of "ddata->vcc_reg", so
it returned success instead of a negative error code.
Fixes: 0d3dbeb814 ("video: fbdev: omapfb: panel-tpo-td043mtea1: Make use of the helper function dev_err_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The rq pointer points inside the drm_gpu_scheduler structure. Thus
it can't be NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c61cdbdbff ("drm/scheduler: Fix hang when sched_entity released")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Link: https://lore.kernel.org/r/20230517125247.434103-1-VEfanov@ispras.ru
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Address the warning:
```
tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has
been renamed to ConfigParser in Python 3.2. This alias will be
removed in Python 3.12. Use ConfigParser directly instead.
parser = configparser.SafeConfigParser()
```
by removing the word 'Safe'.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously hard coded events/metrics were used, update for the use of
the TopdownL1 json metric group.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 94b1a603fc ("perf stat: Add TopdownL1 metric as a default if present")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the unlikely event that something goes wrong with the device and
its registers, the fan_from_reg() function may return 0. This value
will cause a division-by-zero error in the show_pwm() function.
To prevent this, test the value of
fan_from_reg(data->fan_full_speed[nr]) against 0 before performing
the division. If the division-by-zero error is avoided, assign 0 to
the val variable.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: df9ec2dae0 ("hwmon: (f71882fg) Reorder symbols to get rid of a few forward declarations")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230510143537.145060-1-n.zhandarovich@fintech.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Include module.h in arch/arm64/crypto/sha256-glue.c as it uses
various macros (such as MODULE_AUTHOR) that are defined there.
Also fix the ordering of types.h.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305191953.PIB1w80W-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function returns zero unconditionally. Change it to return void instead
which simplifies its callers as error handing becomes unnecessary.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two place if the at_xdmac_interleaved_queue_desc() fails which
could lead to a NULL dereference where "first" is NULL and we call
list_add_tail(&first->desc_node, ...). In the first caller, the return
is not checked so add a check for that. In the next caller, the return
is checked but if it fails on the first iteration through the loop then
it will lead to a NULL pointer dereference.
Fixes: 4e5385784e ("dmaengine: at_xdmac: handle numf > 1")
Fixes: 62b5cb757f ("dmaengine: at_xdmac: fix memory leak in interleaved mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/21282b66-9860-410a-83df-39c17fcf2f1b@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A fixup for a printk format string warning causes an out-of-bounds
variable access as the %pR string expects a struct resource instead of
a plain resource_size_t.
Change both to the special %pap and %pap helpers for these types.
Fixes: 5a1a3b9c19 ("dmaengine: ste_dma40: Get LCPA SRAM from SRAM node")
Fixes: ef1e1c41a1 ("dmaengine: ste_dma40: use correct print specfier for resource_size_t")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230519093447.4097040-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This implements a new interface to lockdep, lock_set_cmp_fn(), for
defining a custom ordering when taking multiple locks of the same
class.
This is an alternative to subclasses, but can not fully replace them
since subclasses allow lock hierarchies with other clasees
inter-twined, while this relies on pure class nesting.
Specifically, if A is our nesting class then:
A/0 <- B <- A/1
Would be a valid lock order with subclasses (each subclass really is a
full class from the validation PoV) but not with this annotation,
which requires all nesting to be consecutive.
Example output:
| ============================================
| WARNING: possible recursive locking detected
| 6.2.0-rc8-00003-g7d81e591ca6a-dirty #15 Not tainted
| --------------------------------------------
| kworker/14:3/938 is trying to acquire lock:
| ffff8880143218c8 (&b->lock l=0 0:2803368){++++}-{3:3}, at: bch_btree_node_get.part.0+0x81/0x2b0
|
| but task is already holding lock:
| ffff8880143de8c8 (&b->lock l=1 1048575:9223372036854775807){++++}-{3:3}, at: __bch_btree_map_nodes+0xea/0x1e0
| and the lock comparison function returns 1:
|
| other info that might help us debug this:
| Possible unsafe locking scenario:
|
| CPU0
| ----
| lock(&b->lock l=1 1048575:9223372036854775807);
| lock(&b->lock l=0 0:2803368);
|
| *** DEADLOCK ***
|
| May be due to missing lock nesting notation
|
| 3 locks held by kworker/14:3/938:
| #0: ffff888005ea9d38 ((wq_completion)bcache){+.+.}-{0:0}, at: process_one_work+0x1ec/0x530
| #1: ffff8880098c3e70 ((work_completion)(&cl->work)#3){+.+.}-{0:0}, at: process_one_work+0x1ec/0x530
| #2: ffff8880143de8c8 (&b->lock l=1 1048575:9223372036854775807){++++}-{3:3}, at: __bch_btree_map_nodes+0xea/0x1e0
[peterz: extended changelog]
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230509195847.1745548-1-kent.overstreet@linux.dev
Commit a4422ff221 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
adds the section QUALCOMM TYPEC PORT MANAGER DRIVER in MAINTAINERS with
two file entries for header files in include/dt-bindings/usb/typec/.
However, these files are not added to the repository with this commit or
any commit in the related patch series. Probably, these file entries are
just needless leftover after the work went through some refactoring.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Remove the two file entries for non-existent header files.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230519041307.32322-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should use this replace thie.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Message-Id: <20230206091815.1687-1-wangdeming@inspur.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The pointer cb_sb_start is being initialized with a value that is never
read, it is being re-assigned the same value later on when it is first
being used. The initialization is redundant and can be removed.
Cleans up clang scan build warning:
fs/ntfs/compress.c:164:6: warning: Value stored to 'cb_sb_start' during its initialization is never read [deadcode.DeadStores]
u8 *cb_sb_start = cb; /* Beginning of the current sb in the cb. */
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Message-Id: <20230418153607.3125704-1-colin.i.king@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adding hash/HMAC support for SHA-2 and SM3 to StarFive cryptographic
module.
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since host stage-2 mappings are created lazily, we cannot rely solely on
the pte in order to recover the target physical address when checking a
host-initiated memory transition as this permits donation of unmapped
regions corresponding to MMIO or "no-map" memory.
Instead of inspecting the pte, move the addr_is_allowed_memory() check
into the host callback function where it is passed the physical address
directly from the walker.
Cc: Quentin Perret <qperret@google.com>
Fixes: e82edcc75c ("KVM: arm64: Implement do_share() helper for sharing memory")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518095844.1178-1-will@kernel.org
It is host userspace, not the guest, that issues
KVM_DEV_ARM_VGIC_GRP_CTRL
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-5-jean-philippe@linaro.org
It is now config_lock that must be held, not kvm lock. Replace the
comment with a lockdep annotation.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-4-jean-philippe@linaro.org
vgic_its_create() changes the vgic state without holding the
config_lock, which triggers a lockdep warning in vgic_v4_init():
[ 358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[ 358.707410] vgic_v4_init+0x15c/0x7a8
[ 358.708550] vgic_its_create+0x37c/0x4a4
[ 358.709640] kvm_vm_ioctl+0x1518/0x2d80
[ 358.710688] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 358.711960] invoke_syscall.constprop.0+0x70/0x1e0
[ 358.713245] do_el0_svc+0xe4/0x2d4
[ 358.714289] el0_svc+0x44/0x8c
[ 358.715329] el0t_64_sync_handler+0xf4/0x120
[ 358.716615] el0t_64_sync+0x190/0x194
Wrap the whole of vgic_its_create() with config_lock since, in addition
to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic
state.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-3-jean-philippe@linaro.org
Lockdep reports a circular lock dependency between the srcu and the
config_lock:
[ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[ 262.182010] __synchronize_srcu+0xb0/0x224
[ 262.183422] synchronize_srcu_expedited+0x24/0x34
[ 262.184554] kvm_io_bus_register_dev+0x324/0x50c
[ 262.185650] vgic_register_redist_iodev+0x254/0x398
[ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724
[ 262.188087] kvm_vgic_addr+0x364/0x600
[ 262.189189] vgic_set_common_attr+0x90/0x544
[ 262.190278] vgic_v3_set_attr+0x74/0x9c
[ 262.191432] kvm_device_ioctl+0x2a0/0x4e4
[ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.195006] do_el0_svc+0xe4/0x2d4
[ 262.195929] el0_svc+0x44/0x8c
[ 262.196917] el0t_64_sync_handler+0xf4/0x120
[ 262.198238] el0t_64_sync+0x190/0x194
[ 262.199224]
[ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[ 262.201094] __lock_acquire+0x2b70/0x626c
[ 262.202245] lock_acquire+0x454/0x778
[ 262.203132] __mutex_lock+0x190/0x8b4
[ 262.204023] mutex_lock_nested+0x24/0x30
[ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0
[ 262.206178] dispatch_mmio_write+0xd8/0x258
[ 262.207498] __kvm_io_bus_write+0x1e0/0x350
[ 262.208582] kvm_io_bus_write+0xe0/0x1cc
[ 262.209653] io_mem_abort+0x2ac/0x6d8
[ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88
[ 262.211937] handle_exit+0xc4/0x39c
[ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8
[ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.217774] do_el0_svc+0xe4/0x2d4
[ 262.218758] el0_svc+0x44/0x8c
[ 262.219941] el0t_64_sync_handler+0xf4/0x120
[ 262.221110] el0t_64_sync+0x190/0x194
Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.
In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).
Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.
The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.
Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org
Since, CAAM driver is probed before soc_device_attribute done as part of:
- drivers/soc/imx/soc-imx8m.c (for i.MX8M)
- drivers/firmware/imx/ele_mu.c (EdgeLock Enclave kernel driver, for i.MX8ULP)
It is needed to return -EPROBE_DEFER, after calling soc_device_match() in
drivers/crypto/caam/ctrl.c.
soc_device_match returns NULL for:
- i.MX8M
- i.MX8ULP,
can be considered that the SoC device has not been probed yet.
Hence, it returns -EPROBE_DEFER directly.
caam: imx: change to use of_match_node in run_descriptor_deco0
Providing imx8m_machine_match to match:
- i.MX8M{Q,M,N,P},
- i.MX8ULP,
so as to start using of_match_node, to simplify the code.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
256 bytes is quite often used in performance benchmarks and this size
appears to be also working just fine, so mark it as safe so that we do
not fallback to software implementation for this packet size. Otherwise
there is a strange bump up in crypto performance at 256 byte packet size.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of duplicating the sha256 block processing code, reuse
the common code from crypto/sha256_base.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function sha224_update is exactly the same as sha256_update.
Moreover it's not even used in the kernel so it can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
the updates to rest of the descriptor are visible before
transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
tx descriptor.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.
Fixes: 86d7476078 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid early devlink info return if errors arise with MCDI commands
executed for getting the required info from the device. The rationale
is some commands can fail but later ones could still give useful data.
Moreover, some nvram partitions could not be present which needs to be
handled as a non error.
The specific errors are reported through system messages and if any
error appears, it will be reported generically through extack.
Fixes 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:
- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
? smcr_buf_map_link+0x24b/0x290 [smc]
? __smc_buf_create+0x4ee/0x9b0 [smc]
smc_clc_send_accept+0x4c/0xb0 [smc]
smc_listen_work+0x346/0x650 [smc]
? __schedule+0x279/0x820
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().
If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.
When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.
Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.
| Try SMCRv2 device first
| |-> conn->lgr: assign existed SMCRv2 link group;
| |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
| |-> sndbuf & RMB creation fails, quit;
|
| Try SMCRv1 device then
| |-> conn->lgr: create SMCRv1 link group and assign;
| |-> conn->link: keep SMCRv2 link mistakenly;
| |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
| initialized.
|
| Then smc_clc_send_confirm_accept() accesses
| conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
v
This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes: b60417a9f2 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NAPI gets called with budget of 0 from netpoll, which has interrupts
disabled. We should try to free some space on Tx rings and nothing
else.
Specifically do not try to handle XDP TX or try to refill Rx buffers -
we can't use the page pool from IRQ context. Don't check if IRQs moved,
either, that makes no sense in netpoll. Netpoll calls _all_ the rings
from whatever CPU it happens to be invoked on.
In general do as little as possible, the work quickly adds up when
there's tens of rings to poll.
The immediate stack trace I was seeing is:
__do_softirq+0xd1/0x2c0
__local_bh_enable_ip+0xc7/0x120
</IRQ>
<TASK>
page_pool_put_defragged_page+0x267/0x320
mlx5e_free_xdpsq_desc+0x99/0xd0
mlx5e_poll_xdpsq_cq+0x138/0x3b0
mlx5e_napi_poll+0xc3/0x8b0
netpoll_poll_dev+0xce/0x150
AFAIU page pool takes a BH lock, releases it and since BH is now
enabled tries to run softirqs.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 60bbf7eeef ("mlx5: use page_pool for xdp_return_frame call")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
tls: rx: strp: fix inline crypto offload
The local strparser version I added to TLS does not preserve
decryption status, which breaks inline crypto (NIC offload).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.
We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.
Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.
Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.
Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.
This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->len covers the entire skb, including the frag_list.
In fact we're guaranteed that rxm->full_len <= skb->len,
so since the change under Fixes we were not checking decrypt
status of any skb but the first.
Note that the skb_pagelen() added here may feel a bit costly,
but it's removed by subsequent fixes, anyway.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 86b259f6f8 ("tls: rx: device: bound the frag walk")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
First two patches are bugfixes.
Third patch skips the overhead of rebooting the amp after applying
firmware files when we know that it isn't necessary.
