When there is only one input/output format specified in topology, there
is no need to search for a matching format, simply pick the available
one. This is in preparation to modify and split the selection logic for
the input and output audio formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We should use RT711_JD2_100K for on board rt711
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
These tables are used for 'nocodec' and SoundWire mockups+RVP tests.
The LNL RVP has a single rt711-sdca SoundWire codec.
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Currently, set_codec_init_func always start with link->adr_d[0] because
we assumed all adr_d on the same link are the same devices. The
assumption is no longer valid when different devices on the same sdw link
are supported.
Fixes: c8db7b5012 ("ASoC: Intel: sof_sdw: support different devices on the same sdw link")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The description and board layout is changed and different
from previous ones for CometLake and Tigerlake.
The new codec layout for MTL is:
SDW0: RT711 Headphone
SDW1: RT714 DMIC
SDW2: RT1316 Speaker
SDW3: RT1316 Speaker
The previous codec layout for CML and TGL is:
SDW0: RT711 Headphone
SDW1: RT1316 Speaker
SDW2: RT1316 Speaker
SDW3: RT714 DMIC
Signed-off-by: Chao Song <chao.song@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We should use RT711_JD2_100K for on board rt711.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Terry Cheong <htcheong@chromium.org
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Update the driver to use the new ASoC core control notify helper.
This also fixes a bug where the control would not be found if the
CODEC was given a name prefix.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512122838.243002-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a function to allow ASoC drivers to easily notify an ALSA control
change. This function will automatically add any component naming
prefix into the control name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512122838.243002-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
The memory allocated for the tuples array assumes that there's 1
instance of all tokens already. So for those tokens that have multiple
instances in topology, we need to exclude the initial instance that has
already been accounted for.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Using the same token ID for both input and output format pin index
results in collisions and incorrect pin index getting parsed from
topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515104403.32207-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add apll1_d4 to clocks for switching the parent of top_a1sys_hp
dynamically and add property "mediatek,infracfg" for bus protection.
Because no mt8188 upstream dts exists, the change won't break anything.
In addition, apll2_d4, apll12_div4, top_a2sys and top_aud_iec are also
included in clocks, because these clocks are possibly used in the future.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230510035526.18137-10-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
The original clock names are different from the list in driver code.
Correct the mismatched binding names in the patch.
Because no mt8188 upstream dts exists, it doesn't affect the existing
dts file.
Fixes: 692d25b67e ("ASoC: dt-bindings: mediatek,mt8188-afe: add audio afe document")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230510035526.18137-9-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
apll2_d4, apll12_div4, top_a2sys and top_aud_iec are possibly used in
the future. To prevent from breaking binding ABI after any mt8188 dts
upstream, add these clocks to clock list in advance.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Link: https://lore.kernel.org/r/20230510035526.18137-8-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
There is no benefit to separate two components for AFE, so DAI driver
registration is moved to dev_snd_soc_register_component to merge these
two components.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Link: https://lore.kernel.org/r/20230510035526.18137-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
Currently, APLL is only used in ETDM module, so APLL and APLL tuner
don't need to be enabled when AFE is used. Integrate APLL control into
ETDM DAPM routes, so that APLL can be enabled when it is really required.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Link: https://lore.kernel.org/r/20230510035526.18137-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
Replace register controls in snd_soc_dai_ops with snd_soc_dapm_widgets.
startup, shutdown and trigger ops are removed, and create DAPM_SUPPLY
to handle mclk, clock gating and etdm enabling. Additionally, mclk setup
sequence is also updated because of new supply enabling sequence.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Link: https://lore.kernel.org/r/20230510035526.18137-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
AUDIO_HIRES is not required in MT8188. Because top_audio_h is disabled
when hires clock is not used, set_parent is a redundant operation.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230510035526.18137-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.
Function now returns -ENOMEM or 0 on success.
stackusage
Before:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208
dynamic,bounded
After:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192
dynamic,bounded
Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled
Tested with an MTD mount point and some user set/getfattr.
Many current target on OpenWRT also suffer from a compilation warning
(that become an error with CONFIG_WERROR) with the following output:
fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
887 | }
| ^
Using dynamic allocation fix this compilation warning.
Fixes: c9f700f840 ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Message-Id: <20230506045612.16616-1-ansuelsmth@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
fs/open.c: In functions 'setattr_vfsuid' and 'setattr_vfsgid':
warning: Function parameter or member 'attr' not described
- Fix warning by removing kernel-doc for these as they are static
inline functions and not required to be exposed via kernel-doc.
fs/open.c:
warning: Excess function parameter 'opened' description in 'finish_open'
warning: Excess function parameter 'cred' description in 'vfs_open'
- Fix by removing the parameters from the kernel-doc as they are no
longer required by the function.
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Message-Id: <20230506182928.384105-1-anuradha@debian.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:242:2-3: Unneeded semicolon
./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:476:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4947
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loading i915 on UBSAN enabled kernels (CONFIG_UBSAN/CONFIG_UBSAN_BOOL)
causes the following warning:
UBSAN: invalid-load in drivers/gpu/drm/i915/gt/uc/intel_uc.c:558:2
load of value 255 is not a valid value for type '_Bool'
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value.cold+0x43/0x48
__uc_init_hw+0x76a/0x903 [i915]
...
i915_driver_probe+0xfb1/0x1eb0 [i915]
i915_pci_probe+0xbe/0x2d0 [i915]
The warning happens because during probe i915_hwmon is still not available
which results in the output boolean variable *old remaining
uninitialized. Silence the warning by initializing the variable to an
arbitrary value.
v2: Move variable initialization to the declaration (Andi)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512203735.2635237-1-ashutosh.dixit@intel.com
While testing a Fiberstore SFP-10G-T module (which uses 10GBASE-R with
rate adaption) in a Clearfog platform (which can't do that) it was
found that the PHYs advertisement was not limited according to the
hosts capabilities when using ethtool to change it.
Fix this by ensuring that we mask the advertisement with the computed
support mask as the very first thing we do.
Fixes: cbc1bb1e46 ("net: phylink: simplify phy case for ksettings_set method")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
tipc: fix the mtu update in link mtu negotiation
This patchset fixes a crash caused by a too small MTU carried in the
activate msg. Note that as such malicious packet does not exist in
the normal env, the fix won't break any application
The 1st patch introduces a function to calculate the minimum MTU for
the bearer, and the 2nd patch fixes the crash with this helper. While
at it, the 3rd patch fixes the udp bearer mtu update by netlink with
this helper.
====================
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking the bearer min mtu with tipc_udp_mtu_bad() only works for
IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the
min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU
for min mtu, which works for both IPv4 and IPv6 UDP bearer.
Note that tipc_udp_mtu_bad() is still used to check media min mtu
in __tipc_nl_media_set(), as m->mtu currently is only used by the
IPv4 UDP bearer as its default mtu value.
Fixes: 682cd3cf94 ("tipc: confgiure and apply UDP bearer MTU on running links")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
Call Trace:
<IRQ>
skb_release_data+0xf9/0x1d0
kfree_skb_reason+0x40/0x100
tipc_link_xmit+0x57a/0x740 [tipc]
tipc_node_xmit+0x16c/0x5c0 [tipc]
tipc_named_node_up+0x27f/0x2c0 [tipc]
tipc_node_write_unlock+0x149/0x170 [tipc]
tipc_rcv+0x608/0x740 [tipc]
tipc_udp_recv+0xdc/0x1f0 [tipc]
udp_queue_rcv_one_skb+0x33e/0x620
udp_unicast_rcv_skb.isra.72+0x75/0x90
__udp4_lib_rcv+0x56d/0xc20
ip_protocol_deliver_rcu+0x100/0x2d0
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small.
Fixes: ed193ece26 ("tipc: simplify link mtu negotiation")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As different media may requires different min mtu, and even the
same media with different net family requires different min mtu,
add tipc_bearer_min_mtu() to calculate min mtu accordingly.
This API will be used to check the new mtu when doing the link
mtu negotiation in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the extra semicolon at end. Issue identified using
semicolon.cocci Coccinelle semantic patch.
drivers/net/ethernet/microchip/vcap/vcap_api.c:1124:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1165:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1239:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1287:3-4: Unneeded semicolon
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Changes:
V1 -> V2: Target tree included in the subject line.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 87e3bee0f2 ("net: mdio: i2c: Separate C22 and C45 transactions")
separated the non-rollball bus accessors, but left the rollball
accessors as is. As rollball accessors are clause 45, this results
in the rollball protocol being completely non-functional. Fix this.
Fixes: 87e3bee0f2 ("net: mdio: i2c: Separate C22 and C45 transactions")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add i915 parameter to I915_STATE_WARN() and use device based logging.
Done using cocci + hand edited where there was no i915 local variable
ready.
v2: avoid null deref in verify_connector_state()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
[ Viresh : Updated commit subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
V3U firmware misses to enable WDT resets. Because there won't be any
updates to the firmware anymore, enable that in Linux.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230419201511.31648-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Hariprasad Kelam says:
====================
octeontx2-pf: HTB offload support
octeontx2 silicon and CN10K transmit interface consists of five
transmit levels starting from MDQ, TL4 to TL1. Once packets are
submitted to MDQ, hardware picks all active MDQs using strict
priority, and MDQs having the same priority level are chosen using
round robin. Each packet will traverse MDQ, TL4 to TL1 levels.
Each level contains an array of queues to support scheduling and
shaping.
As HTB supports classful queuing mechanism by supporting rate and
ceil and allow the user to control the absolute bandwidth to
particular classes of traffic the same can be achieved by
configuring shapers and schedulers on different transmit levels.
This series of patches adds support for HTB offload,
Patch1: Allow strict priority parameter in HTB offload mode.
Patch2: Rename existing total tx queues for better readability
Patch3: defines APIs such that the driver can dynamically initialize/
deinitialize the send queues.
Patch4: Refactors transmit alloc/free calls as preparation for QOS
offload code.
Patch5: moves rate limiting logic to common header which will be used
by qos offload code.
Patch6: Adds actual HTB offload support.
Patch7: exposes qos send queue stats over ethtool.
Patch8: Add documentation about htb offload flow in driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add QOS example configuration along with tc-htb commands
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends ethtool stats support for QoS send queues as well.
upon the number of transmit channels change request, Ensures the real
number of transmit queues are equal to active QoS send queues plus
configured transmit queues.
ethtool -S eth0
txq_qos0: bytes: 3021391800
txq_qos0: frames: 1998275
txq_qos1: bytes: 4619766312
txq_qos1: frames: 3055401
...
...
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch registers callbacks to support HTB offload.
Below are features supported,
- supports traffic shaping on the given class by honoring rate and ceil
configuration.
- supports traffic scheduling, which prioritizes different types of
traffic based on strict priority values.
- supports the creation of leaf to inner classes such that parent node
rate limits apply to all child nodes.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves rate limiting definitions to a common header file and
adds csr definitions required for QOS code.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
