Add a DT schema for the SSM3515 amp by Analog Devices. It's a simple
mono amplifier with digital input.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230511150546.8499-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK
ssmset 0x06 0x07 # chip, out, dac
NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
In the (unlikely) event that pm_runtime_get() (disguised as
pm_runtime_resume_and_get()) fails, the remove callback returned an
error early. The problem with this is that the driver core ignores the
error value and continues removing the device. This results in a
resource leak. Worse the devm allocated resources are freed and so if a
callback of the driver is called later the register mapping is already
gone which probably results in a crash.
Fixes: a31eda65ba ("net: fec: fix clock count mis-match")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 565b4824c3 ("devlink: change port event netdev notifier
from per-net to global") changed original per-net notifier to be
per-devlink instance. That fixed the issue of non-receiving events
of netdev uninit if that moved to a different namespace.
That worked fine in -net tree.
However, later on when commit ee75f1fc44 ("net/mlx5e: Create
separate devlink instance for ethernet auxiliary device") and
commit 72ed5d5624 ("net/mlx5: Suspend auxiliary devices only in
case of PCI device suspend") were merged, a deadlock was introduced
when removing a namespace with devlink instance with another nested
instance.
Here there is the bad flow example resulting in deadlock with mlx5:
net_cleanup_work -> cleanup_net (takes down_read(&pernet_ops_rwsem) ->
devlink_pernet_pre_exit() -> devlink_reload() ->
mlx5_devlink_reload_down() -> mlx5_unload_one_devl_locked() ->
mlx5_detach_device() -> del_adev() -> mlx5e_remove() ->
mlx5e_destroy_devlink() -> devlink_free() ->
unregister_netdevice_notifier() (takes down_write(&pernet_ops_rwsem)
Steps to reproduce:
$ modprobe mlx5_core
$ ip netns add ns1
$ devlink dev reload pci/0000:08:00.0 netns ns1
$ ip netns del ns1
Resolve this by converting the notifier from per-devlink instance to
a static one registered during init phase and leaving it registered
forever. Use this notifier for all devlink port instances created
later on.
Note what a tree needs this fix only in case all of the cited fixes
commits are present.
Reported-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 565b4824c3 ("devlink: change port event netdev notifier from per-net to global")
Fixes: ee75f1fc44 ("net/mlx5e: Create separate devlink instance for ethernet auxiliary device")
Fixes: 72ed5d5624 ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230510144621.932017-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer says:
====================
selftests: seg6: make srv6_end_dt4_l3vpn_test more robust
This pachset aims to improve and make more robust the selftests performed to
check whether SRv6 End.DT4 beahvior works as expected under different system
configurations.
Some Linux distributions enable Deduplication Address Detection and Reverse
Path Filtering mechanisms by default which can interfere with SRv6 End.DT4
behavior and cause selftests to fail.
The following patches improve selftests for End.DT4 by taking these two
mechanisms into account. Specifically:
- patch 1/2: selftests: seg6: disable DAD on IPv6 router cfg for
srv6_end_dt4_l3vpn_test
- patch 2/2: selftets: seg6: disable rp_filter by default in
srv6_end_dt4_l3vpn_test
====================
Link: https://lore.kernel.org/r/20230510111638.12408-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes: 2195444e09 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of
several routers (rt-1, rt-2) and hosts.
When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate
Address Detection (DAD) kicks in when enabled in the Linux distros running
the selftests. DAD is used to check whether an IPv6 address is already
assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo
Request and waiting for a reply.
As the DAD process could take too long to complete, it may cause the
failing of some tests carried out by the srv6_end_dt4_l3vpn_test script.
To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers
since we configure the virtual network manually and do not need any address
deduplication mechanism at all.
Fixes: 2195444e09 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Microchip ENC28J60 SPI Ethernet driver schedules a work item from
the interrupt handler because accesses to the SPI bus may sleep.
On PREEMPT_RT (which forces interrupt handling into threads) this
old-fashioned approach unnecessarily increases latency because an
interrupt results in first waking the interrupt thread, then scheduling
the work item. So, a double indirection to handle an interrupt.
Avoid by converting the driver to modern threaded interrupt handling.
Signed-off-by: Philipp Rosenberger <p.rosenberger@kunbus.com>
Signed-off-by: Zhi Han <hanzhi09@gmail.com>
[lukas: rewrite commit message, linewrap request_threaded_irq() call]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/342380d989ce26bc49f0e5d45fbb0416a5f7809f.1683606193.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable PXP with MTL-GSC-CS: add the has_pxp into device info
and increase the debugfs teardown timeouts to align with
new GSC-CS + firmware specs.
Now that we have 3 places that are selecting pxp timeouts
based on tee vs gsccs back-end, let's add a helper.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-9-alan.previn.teres.alexis@intel.com
On legacy platforms, KCR HW enabling is done at the time the mei
component interface is bound. It's also disabled during unbind.
However, for MTL onwards, we don't depend on a tee component
to start sending GSC-CS firmware messages.
Thus, immediately enable (or disable) KCR HW on PXP's init,
fini and resume.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-8-alan.previn.teres.alexis@intel.com
Because of the additional firmware, component-driver and
initialization depedencies required on MTL platform before a
PXP context can be created, UMD calling for PXP creation as a
way to get-caps can take a long time. An actual real world
customer stack has seen this happen in the 4-to-8 second range
after the kernel starts (which sees MESA's init appear in the
middle of this range as the compositor comes up). To avoid
unncessary delays experienced by the UMD for get-caps purposes,
add a GET_PARAM for I915_PARAM_PXP_SUPPORT.
However, some failures can still occur after all the depedencies
are met (such as firmware init flow failure, bios configurations
or SOC fusing not allowing PXP enablement). Those scenarios will
only be known to user space when it attempts creating a PXP context
and is documented in the GEM UAPI headers.
While making this change, create a helper that is common to both
GET_PARAM caller and intel_pxp_start since the latter does
similar checks.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-7-alan.previn.teres.alexis@intel.com
Add MTL's function for ARB session creation using PXP firmware
version 4.3 ABI structure format.
While relooking at the ARB session creation flow in intel_pxp_start,
let's address missing UAPI documentation. Without actually changing
backward compatible behavior, update i915's drm-uapi comments
that describe the possible error values when creating a context
with I915_CONTEXT_PARAM_PROTECTED_CONTENT:
Since the first merge of PXP support on ADL, i915 returns -ENXIO
if a dependency such as firmware or component driver was yet to
be loaded or returns -EIO if the creation attempt failed when
requested by the PXP firmware (specific firmware error responses
are reported in dmesg).
Add MTL's function for ARB session invalidation but this
reuses PXP firmware version 4.2 ABI structure format.
For both cases, in the back-end gsccs functions for sending messages
to the firmware inspect the GSC-CS-Mem-Header's pending-bit which
means the GSC firmware is busy and we should retry.
Given the last hw requirement, lets also update functions in
front-end layer that wait for session creation or teardown
completion to use new worst case timeout periods.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-6-alan.previn.teres.alexis@intel.com
Add GSC engine based method for sending PXP firmware packets
to the GSC firmware for MTL (and future) products.
Use the newly added helpers to populate the GSC-CS memory
header and send the message packet to the FW by dispatching
the GSC_HECI_CMD_PKT instruction on the GSC engine.
We use non-priveleged batches for submission to GSC engine
which require two buffers for the request:
- a buffer for the HECI packet that contains PXP FW commands
- a batch-buffer that contains the engine instruction for
sending the HECI packet to the GSC firmware.
Thus, add the allocation and freeing of these buffers in gsccs
init and fini.
The GSC-fw may reply to commands with a SUCCESS but with an
additional pending-bit set in the reply packet. This bit
means the GSC-FW is currently busy and the caller needs to
try again with the gsc_message_handle the fw returned. Thus,
add a wrapper to continuously retry send_message while
replaying the gsc_message_handle. Retries need to follow the
arch-spec count and delay until GSC-FW replies with the real
SUCCESS or timeout after that spec'd delay.
The GSC-fw requires a non-zero host_session_handle provided
by the caller to enable gsc_message_handle tracking. Thus,
allocate the host_session_handle at init and destroy it
at fini (the latter requiring an FYI to the gsc-firmware).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-5-alan.previn.teres.alexis@intel.com
Add helper functions into a new file for heci-packet-submission.
The helpers will handle generating the MTL GSC-CS Memory-Header
and submission of the Heci-Cmd-Packet instructions to the engine.
NOTE1: These common functions for heci-packet-submission will be used
by different i915 callers:
1- GSC-SW-Proxy: This is pending upstream publication awaiting
a few remaining opens
2- MTL-HDCP: An equivalent patch has also been published at:
https://patchwork.freedesktop.org/series/111876/. (Patch 1)
3- PXP: This series.
NOTE2: A difference in this patch vs what is appearing is in bullet 2
above is that HDCP (and SW-Proxy) will be using priveleged submission
(GGTT and common gsc-uc-context) while PXP will be using non-priveleged
PPGTT, context and batch buffer. Therefore this patch will only slightly
overlap with the MTL-HDCP patches despite have very similar function
names (emit_foo vs emit_nonpriv_foo). This is because HECI_CMD_PKT
instructions require different flows and hw-specific code when done
via PPGTT based submission (not different from other engines). MTL-HDCP
contains the same intel_gsc_mtl_header_t structures as this but the
helpers there are different. Both add the same new file names.
NOTE3: Additional clarity about the heci-cmd-pkt layout and where the
common helpers come in:
- On MTL, when an i915 subsystem needs to send a command request
to the security firmware, it will send that via the GSC-
engine-command-streamer.
- However those commands, (lets call them "gsc_specific_fw_api"
calls), are not understood by the GSC command streamer hw.
- The GSC CS only looks at the GSC_HECI_CMD_PKT instruction and
passes it along to the GSC firmware.
- The GSC FW on the other hand needs additional metadata to know
which usage service is being called (PXP, HDCP, proxy, etc) along
with session specific info. Thus an extra header called GSC-CS
HECI Memory Header, (C) in below diagram is prepended before
the FW specific API, (D).
- Thus, the structural layout of the request submitted would
need to look like the diagram below (for non-priv PXP).
- In the diagram, the common helper for HDCP, (GSC-Sw-Proxy) and
PXP (i.e. new function intel_gsc_uc_heci_cmd_emit_mtl_header)
will populate blob (C) while additional helpers, different for
PPGGTT (this patch) vs GGTT (HDCP series) will populate
blobs (A) and (B) below.
___________________________________________________________
(A) | MI_BATCH_BUFFER_START (ppgtt, batchbuff-addr, ...) |
| | |
| _|________________________________________________ |
| (B)| GSC_HECI_CMD_PKT (pkt-addr-in, pkt-size-in, | |
| | pkt-addr-out, pkt-size-out) |--------
| | MI_BATCH_BUFFER_END | | |
| |________________________________________________| | |
| | |
|_________________________________________________________| |
|
---------------------------------------------------------
|
\|/
______V___________________________________________
| _________________________________________ |
|(C)| | |
| | struct intel_gsc_mtl_header { | |
| | validity marker | |
| | heci_clent_id | |
| | ... | |
| | } | |
| |_______________________________________| |
|(D)| | |
| | struct gsc_fw_specific_api_foobar { | |
| | ... | |
| | For an example, see | |
| | 'struct pxp43_create_arb_in' at | |
| | intel_pxp_cmd_interface_43.h | |
| | | |
| | } | |
| | Struture depends on command type | |
| | struct gsc_fw_specific_api_foobar { | |
| |_______________________________________| |
|________________________________________________|
That said, this patch provides basic helpers but leaves the
PXP subsystem (i.e. the caller) to handle (D) and everything
else such as input/output size verification or handling the
responses from security firmware (for example, requiring a retry).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-4-alan.previn.teres.alexis@intel.com
Add MTL hw-plumbing enabling for KCR operation under PXP
which includes:
1. Updating 'pick-gt' to get the media tile for
KCR interrupt handling
2. Adding MTL's KCR registers for PXP operation
(init, status-checking, etc.).
While doing #2, lets create a separate registers header file for PXP
to be consistent with other i915 global subsystems.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-3-alan.previn.teres.alexis@intel.com
For MTL, the PXP back-end transport uses the GSC engine to submit
HECI packets through the HW to the GSC firmware for PXP arb
session management. This submission uses a non-priveleged
batch buffer, a buffer for the command packet and of course
a context targeting the GSC-CS.
Thus for MTL, we need to allocate and free a set of execution
submission resources for the management of the arbitration session.
Lets start with the context creation first since that object and
its usage is very straight-forward. We'll add the buffer allocation
and freeing later when we introduce the gsccs' send-message function.
Do this one time allocation of gsccs specific resources in
a new gsccs source file with intel_pxp_gsccs_init / fini functions
and hook them up from the PXP front-end.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-2-alan.previn.teres.alexis@intel.com
Add an example .exit and .suite_exit function to the KUnit example
suite. Given exit functions are a bit more subtle than init functions
(due to running in a different kthread, and running even after tests or
test init functions fail), providing an easy place to experiment with
them is useful.
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's exit functions will run even if the corresponding init function
fails. It's easy, when writing an exit function, to assume the init
function succeeded, and (for example) access uninitialised memory or
dereference NULL pointers.
Note that this case exists and should be handled in the documentation.
Suggested-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://lore.kernel.org/linux-kselftest/a39af0400abedb2e9b31d84c37551cecc3eed0e1.camel@sipsolutions.net/
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As assertions abort the test cleanup process, they should be avoided
from within a suite's exit function, or from within resource 'free'
functions. Unlike with initialisation or main test execution, no further
cleanup will be performed after a failed assertion, potentially causing
a leak of resources.
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit tests run in a kthread, with the current->kunit_test pointer set
to the test's context. This allows the kunit_get_current_test() and
kunit_fail_current_test() macros to work. Normally, this pointer is
still valid during test shutdown (i.e., the suite->exit function, and
any resource cleanup). However, if the test has exited early (e.g., due
to a failed assertion), the cleanup is done in the parent KUnit thread,
which does not have an active context.
Instead, in the event test terminates early, run the test exit and
cleanup from a new 'cleanup' kthread, which sets current->kunit_test,
and better isolates the rest of KUnit from issues which arise in test
cleanup.
If a test cleanup function itself aborts (e.g., due to an assertion
failing), there will be no further attempts to clean up: an error will
be logged and the test failed. For example:
# example_simple_test: test aborted during cleanup. continuing without cleaning up
This should also make it easier to get access to the KUnit context,
particularly from within resource cleanup functions, which may, for
example, need access to data in test->priv.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 5459c0b704 ("PCI/DPC: Quirk PIO log size for certain Intel Root
Ports") added quirks for Tiger and Alder Lake Root Ports but missed that
the same issue exists also in the previous generation, Ice Lake.
Apply the quirk for Ice Lake Root Ports as well. This prevents kernel
complaints like:
DPC: RP PIO log size 0 is invalid
and also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
[bhelgaas: add dmesg warning and RP PIO Log dump info]
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=209943
Link: https://lore.kernel.org/r/20230511121905.73949-1-mika.westerberg@linux.intel.com
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
o fixes for inode garbage collection shutdown racing with work queue
updates
o ensure inodegc workers run on the CPU they are supposed to
o disable counter scrubbing until we can exclusively freeze the
filesystem from the kernel
o Regression fixes for new allocation related bugs
o a couple of minor cleanups
-----BEGIN PGP SIGNATURE-----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=qok2
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.4-rc1-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs bug fixes from Dave Chinner:
"Largely minor bug fixes and cleanups, th emost important of which are
probably the fixes for regressions in the extent allocation code:
- fixes for inode garbage collection shutdown racing with work queue
updates
- ensure inodegc workers run on the CPU they are supposed to
- disable counter scrubbing until we can exclusively freeze the
filesystem from the kernel
- regression fixes for new allocation related bugs
- a couple of minor cleanups"
* tag 'xfs-6.4-rc1-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_inodegc_stop racing with mod_delayed_work
xfs: disable reaping in fscounters scrub
xfs: check that per-cpu inodegc workers actually run on that cpu
xfs: explicitly specify cpu when forcing inodegc delayed work to run immediately
xfs: fix negative array access in xfs_getbmap
xfs: don't allocate into the data fork for an unshare request
xfs: flush dirty data and drain directios before scrubbing cow fork
xfs: set bnobt/cntbt numrecs correctly when formatting new AGs
xfs: don't unconditionally null args->pag in xfs_bmap_btalloc_at_eof
The ChromeOS EC's mux interface allows us to specify whether the port
should be configured for Pin Assignment D in DisplayPort alternate mode
(i.e 2 lanes USB + 2 lanes DP). Update the function that determines mux
state to account for Pin Assignment D and return the appropriate mux
setting.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230508183428.1893357-1-pmalani@chromium.org
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This code-movement-only commit moves the rcu_scale_cleanup() and
rcu_scale_shutdown() functions to follow kfree_scale_cleanup().
This is code movement is in preparation for a bug-fix patch that invokes
kfree_scale_cleanup() from rcu_scale_cleanup().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The BUSTED-BOOST and TREE03 scenarios specify a mythical tree.use_softirq
module parameter, which means a failure to get full test coverage. This
commit therefore corrects the name to rcutree.use_softirq.
Fixes: e2b949d543 ("rcutorture: Make TREE03 use real-time tree.use_softirq setting")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
This commit adds a long_hold module parameter to allow testing diagnostics
for excessive lock-hold times. Also adjust torture_param() invocations
for longer line length while in the area.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Callbacks can only be queued as lazy on NOCB CPUs, therefore iterating
over the NOCB mask is enough for both counting and scanning. Just lock
the mostly uncontended barrier mutex on counting as well in order to
keep rcu_nocb_mask stable.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_tasks_invoke_cbs() function relies on queue_work_on() to silently
fall back to WORK_CPU_UNBOUND when the specified CPU is offline. However,
the queue_work_on() function's silent fallback mechanism relies on that
CPU having been online at some time in the past. When queue_work_on()
is passed a CPU that has never been online, workqueue lockups ensue,
which can be bad for your kernel's general health and well-being.
This commit therefore checks whether a given CPU has ever been online,
and, if not substitutes WORK_CPU_UNBOUND in the subsequent call to
queue_work_on(). Why not simply omit the queue_work_on() call entirely?
Because this function is flooding callback-invocation notifications
to all CPUs, and must deal with possibilities that include a sparse
cpu_possible_mask.
This commit also moves the setting of the rcu_data structure's
->beenonline field to rcu_cpu_starting(), which executes on the
incoming CPU before that CPU has ever enabled interrupts. This ensures
that the required workqueues are present. In addition, because the
incoming CPU has not yet enabled its interrupts, there cannot yet have
been any softirq handlers running on this CPU, which means that the
WARN_ON_ONCE(!rdp->beenonline) within the RCU_SOFTIRQ handler cannot
have triggered yet.
Fixes: d363f833c6 ("rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_cpu_starting() is written so that it might be invoked
with interrupts enabled. However, it is always called when interrupts
are disabled, either by rcu_init(), notify_cpu_starting(), or from a
call point prior to the call to notify_cpu_starting().
But why bother requiring that interrupts be disabled? The purpose is
to allow the rcu_data structure's ->beenonline flag to be set after all
early processing has completed for the incoming CPU, thus allowing this
flag to be used to determine when workqueues have been set up for the
incoming CPU, while still allowing this flag to be used as a diagnostic
within rcu_core().
This commit therefore makes rcu_cpu_starting() rely on interrupts being
disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_data structure's ->rcu_cpu_has_work field can be modified by
any CPU attempting to wake up the rcuc kthread. Therefore, this commit
marks accesses to this field from the rcu_cpu_kthread() function.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The per-CPU rcu_data structure's ->cpu_no_qs.b.exp field is updated
only on the instance corresponding to the current CPU, but can be read
more widely. Unmarked accesses are OK from the corresponding CPU, but
only if interrupts are disabled, given that interrupt handlers can and
do modify this field.
Unfortunately, although the load from rcu_preempt_deferred_qs() is always
carried out from the corresponding CPU, interrupts are not necessarily
disabled. This commit therefore upgrades this load to READ_ONCE.
Similarly, the diagnostic access from synchronize_rcu_expedited_wait()
might run with interrupts disabled and from some other CPU. This commit
therefore marks this load with data_race().
Finally, the C-language access in rcu_preempt_ctxt_queue() is OK as
is because interrupts are disabled and this load is always from the
corresponding CPU. This commit adds a comment giving the rationale for
this access being safe.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, if there are more than 100 ready-to-invoke RCU callbacks queued
on a given CPU, the rcu_do_batch() function sets a timeout for invocation
of the series. This timeout defaulting to three milliseconds, and may
be adjusted using the rcutree.rcu_resched_ns kernel boot parameter.
This timeout is checked using local_clock(), but the overhead of this
function combined with the common-case very small callback-invocation
overhead means that local_clock() is checked every 32nd invocation.
This works well except for longer-than average callbacks. For example,
a series of 500-microsecond-duration callbacks means that local_clock()
is checked only once every 16 milliseconds, which makes it difficult to
enforce a three-millisecond timeout.
This commit therefore adds a Kconfig option RCU_DOUBLE_CHECK_CB_TIME
that enables backup timeout checking using the coarser grained but
lighter weight jiffies. If the jiffies counter detects a timeout,
then local_clock() is consulted even if this is not the 32nd callback.
This prevents the aforementioned 16-millisecond latency blow.
Reported-by: Domas Mituzas <dmituzas@meta.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a callback-invocation time limit is enforced only for
callbacks invoked from the softirq environment, the rationale being
that when callbacks are instead invoked from rcuc and rcuoc kthreads,
these callbacks cannot be holding up other softirq vectors.
Which is in fact true. However, if an rcuc kthread spends too much time
invoking callbacks, it can delay quiescent-state reports from its CPU,
which can also be a problem.
This commit therefore applies the callback-invocation time limit to
callback invocation from the rcuc kthreads as well as from softirq.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Since there are now exactly _zero_ users of RCU_NONIDLE(), make it go
away before someone else decides to (ab)use it.
[ paulmck: Remove extraneous whitespace. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Recent changes and additions to RCU have not been reflected in
Documentation/core-api/kernel-api.rst, which makes it harder to find
the kernel-doc headers in recently added RCU files.
Therefore, add those files.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: <linux-doc@vger.kernel.org>
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
smack_dentry_create_files_as() determines whether transmuting should occur
based on the label of the parent directory the new inode will be added to,
and not the label of the directory where it is created.
This helps for example to do transmuting on overlayfs, since the latter
first creates the inode in the working directory, and then moves it to the
correct destination.
However, despite smack_dentry_create_files_as() provides the correct label,
smack_inode_init_security() does not know from passed information whether
or not transmuting occurred. Without this information,
smack_inode_init_security() cannot set SMK_INODE_CHANGED in smk_flags,
which will result in the SMACK64TRANSMUTE xattr not being set in
smack_d_instantiate().
Thus, add the smk_transmuted field to the task_smack structure, and set it
in smack_dentry_create_files_as() to smk_task if transmuting occurred. If
smk_task is equal to smk_transmuted in smack_inode_init_security(), act as
if transmuting was successful but without taking the label from the parent
directory (the inode label was already set correctly from the current
credentials in smack_inode_alloc_security()).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Enhance smack_inode_getsecurity() to retrieve the value for
SMACK64TRANSMUTE from the inode security blob, similarly to SMACK64.
This helps to display accurate values in the situation where the security
labels come from mount options and not from xattrs.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.
alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.
Pin configs are needed to enable headset mic detection.
Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
