Don't attempt to put clockdomains to sleep; this should be handled by the
clock framework. It should be enough to program the next-power-state,
and then let the code in omap_pm_clkdms_setup() deal with the rest.
Start out by programming the MPU and CORE powerdomains to stay ON.
Then control the MPU and CORE powerdomain states directly in
omap2_enter_full_retention() and omap2_enter_mpu_retention(). Not the
most optimal way to do it, but certainly is the most conservative until
OMAP2xxx PM is working again.
Get rid of the open-coded PM_PWSTCTRL_MPU writes in
omap2_enter_mpu_retention(); use the powerdomain code instead.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
In clkdm_sleep(), the powerdomain should be eligible to switch power
states right after the call to the low-level clockdomain sleep
function. We should have been tracking that with the
pwrdm_state_switch() code, but we weren't, for whatever reason. Fix that.
This resolves the "pwrdm state mismatch(cam_pwrdm) 3 != 0" that appears
during the OMAP4460 Pandaboard-ES PM test, e.g. here:
http://www.pwsan.com/omap/testlogs/test_v3.8-rc5/20130126003323/pm/4460pandaes/4460pandaes_log.txt
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Fix the trace in the case a power domain did not hit the desired
state, as reported by Paul Walmsley.
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
[paul@pwsan.com: split this fix off from the patch
"ARM: OMAP2+: PM debug: trace the functional power domains states"]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Avoid programming the MPU and CORE powerdomain next-power-state
registers if those powerdomains will never enter low-power states
(e.g., the state that people refer to as "C1").
To avoid making assumptions about CPUIdle states based on their order
in the list, use a flag to mark CPUIdle states that don't enter
powerdomain low-power states.
Avoid a previous-power-state register read on the MPU powerdomain
unless we know that the MPU was supposed to go OFF during the last
state transition. Previous-power-state register reads can be very
expensive, so it's worth avoiding these when possible.
Since the CORE_L3 clockdomain can't go inactive unless the MPU is active,
there's little point blocking autoidle on the CORE_L3 clockdomain in "C1"
state, since we've programmed the MPU clockdomain to stay active.
Remove the unnecessary code.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
In func svc_export_parse, the uuid which used kmemdup to alloc will be
changed in func export_update.So the later kfree don't free this memory.
And it can't be free in func svc_export_parse because other place still
used.So put this operation in func svc_export_put.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch cleans unneccessary includes and reorders the remaining
includes in common dove code.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
vmxnet3 fails to set netif_carrier_off on probe, meaning that when an interface
is opened the __LINK_STATE_NOCARRIER bit is already cleared, and so
/sys/class/net/<ifname>/operstate remains in the unknown state. Correct this by
setting netif_carrier_off on probe, like other drivers do.
Also, while we're at it, lets remove the netif_carrier_ok checks from the
link_state_update function, as that check is atomically contained within the
netif_carrier_[on|off] functions anyway
Tested successfully by myself
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rare instances, memory errors have been detected in the internal packet
buffer memory on I217/I218 when stressed under certain environmental
conditions. Enable Error Correcting Code (ECC) in hardware to catch both
correctable and uncorrectable errors. Correctable errors will be handled
by the hardware. Uncorrectable errors in the packet buffer will cause the
packet to be received with an error indication in the buffer descriptor
causing the packet to be discarded. If the uncorrectable error is in the
descriptor itself, the hardware will stop and interrupt the driver
indicating the error. The driver will then reset the hardware in order to
clear the error and restart.
Both types of errors will be accounted for in statistics counters.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: <stable@vger.kernel.org> # 3.5.x & 3.6.x
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bonding module is loaded with primary parameter and one decides to unset
primary slave using sysfs these settings are not preserved during bond device
restart. Primary slave is only unset once and it's not remembered in
bond->params structure. Below is example of recreation.
grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond0
BONDING_OPTS="mode=active-backup miimon=100 primary=eth01"
grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: eth01 (primary_reselect always)
echo "" > /sys/class/net/bond0/bonding/primary
grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: None
sed -i -e 's/primary=eth01//' /etc/sysconfig/network-scripts/ifcfg-bond0
grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond
BONDING_OPTS="mode=active-backup miimon=100 "
ifdown bond0 && ifup bond0
without patch:
grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: eth01 (primary_reselect always)
with patch:
grep "Primary Slave" /proc/net/bonding/bond0
Primary Slave: None
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Milos Vyletel <milos.vyletel@sde.cz>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We drop a connection request if the accept backlog is full and there are
sufficient packets in the syn queue to warrant starting drops. Increment the
appropriate counters so this isn't silent, for accurate stats and help in
debugging.
This patch assumes LINUX_MIB_LISTENDROPS is a superset of/includes the
counter LINUX_MIB_LISTENOVERFLOWS.
Signed-off-by: Nivedita Singhvi <niv@us.ibm.com>
Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "Universal/Local" (U/L) bit must be complmented according to RFC4944
and RFC2464.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We forbid polling, writing and reading when the file were detached, this may
complex the user in several cases:
- when guest pass some buffers to vhost/qemu and then disable some queues,
host/qemu needs to do its own cleanup on those buffers which is complex
sometimes. We can do this simply by allowing a user can still write to an
disabled queue. Write to an disabled queue will cause the packet pass to the
kernel and read will get nothing.
- align the polling behavior with macvtap which never fails when the queue is
created. This can simplify the polling errors handling of its user (e.g vhost)
We can simply achieve this by don't assign NULL to tfile->tun when detached.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the polling errors were ignored, which can lead following issues:
- vhost remove itself unconditionally from waitqueue when stopping the poll,
this may crash the kernel since the previous attempt of starting may fail to
add itself to the waitqueue
- userspace may think the backend were successfully set even when the polling
failed.
Solve this by:
- check poll->wqh before trying to remove from waitqueue
- report polling errors in vhost_poll_start(), tx_poll_start(), the return value
will be checked and returned when userspace want to set the backend
After this fix, there still could be a polling failure after backend is set, it
will addressed by the next patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when vhost_init_used() fails the sock refcnt and ubufs were
leaked. Correct this by calling vhost_init_used() before assign ubufs and
restore the oldsock when it fails.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c8d68e6be1 removed carrier off call
from tun_detach since it's now called on queue disable and not only on
tun close. This confuses userspace which used this flag to detect a
free tun. To fix, put this back but under if (clean).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value of pktgen_add_device() is not checked, so
even if we fail to add some device, for example, non-exist one,
we still see "OK:...". This patch fixes it.
After this patch, I got:
# echo "add_device non-exist" > /proc/net/pktgen/kpktgend_0
-bash: echo: write error: No such device
# cat /proc/net/pktgen/kpktgend_0
Running:
Stopped:
Result: ERROR: can not add device non-exist
# echo "add_device eth0" > /proc/net/pktgen/kpktgend_0
# cat /proc/net/pktgen/kpktgend_0
Running:
Stopped: eth0
Result: OK: add_device=eth0
(Candidate for -stable)
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The delay calculation with the rate extension introduces in v3.3 does
not properly work, if other packets are still queued for transmission.
For the delay calculation to work, both delay types (latency and delay
introduces by rate limitation) have to be handled differently. The
latency delay for a packet can overlap with the delay of other packets.
The delay introduced by the rate however is separate, and can only
start, once all other rate-introduced delays finished.
Latency delay is from same distribution for each packet, rate delay
depends on the packet size.
.: latency delay
-: rate delay
x: additional delay we have to wait since another packet is currently
transmitted
.....---- Packet 1
.....xx------ Packet 2
.....------ Packet 3
^^^^^
latency stacks
^^
rate delay doesn't stack
^^
latency stacks
-----> time
When a packet is enqueued, we first consider the latency delay. If other
packets are already queued, we can reduce the latency delay until the
last packet in the queue is send, however the latency delay cannot be
<0, since this would mean that the rate is overcommitted. The new
reference point is the time at which the last packet will be send. To
find the time, when the packet should be send, the rate introduces delay
has to be added on top of that.
Signed-off-by: Johannes Naab <jn@stusta.de>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a tunnel socket is created by userspace, l2tp hooks the socket destructor
in order to clean up resources if userspace closes the socket or crashes. It
also caches a pointer to the struct sock for use in the data path and in the
netlink interface.
While it is safe to use the cached sock pointer in the data path, where the
skb references keep the socket alive, it is not safe to use it elsewhere as
such access introduces a race with userspace closing the socket. In
particular, l2tp_tunnel_delete is prone to oopsing if a multithreaded
userspace application closes a socket at the same time as sending a netlink
delete command for the tunnel.
This patch fixes this oops by forcing l2tp_tunnel_delete to explicitly look up
a tunnel socket held by userspace using sockfd_lookup().
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug
fixes that some net-next work will build upon.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds anti-spoofing checks in sit.c as specified in RFC3964
section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the
checks which could easily be implemented with netfilter.
Specifically this patch adds following logic (based loosely on the
pseudocode in RFC3964 section 5.2):
if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default)
and outer_src_v4 != embedded_ipv4 (inner_src_v6)
drop
if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default)
and outer_dst_v4 != embedded_ipv4 (inner_dst_v6)
drop
accept
To accomplish the specified security checks proposed by above RFCs,
it is still necessary to employ uRPF filters with netfilter. These new
checks only kick in if the employed addresses are within the 2002::/16 or
another range specified by the 6rd-prefix (which defaults to 2002::/16).
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* remove unused members(!): imask, ievent
* move space consuming interrupt name strings (int_name_* members) to
external structures, unessential for the driver's hot path
* keep high priority hot path data within the first 2 cache lines
This reduces struct gfar_priv_grp from 6 to 3 cache lines.
(Also fixed checkpatch warnings for the old code, in the process.)
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out redundant code (improve readability, source code size).
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resize and regroup structure members to eliminate memory holes and
to pack the structure into 2 cache lines (from 3).
tx_ring_size was resized from 4 to 2 bytes and few members were re-grouped
in order to eliminate byte holes and achieve compactness.
Where possible, few members were grouped according to their usage and access
order (i.e. start_xmit vs. clean_tx_ring members), less important members
were pushed at the end.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When attempting to build linux-next with user namespaces enabled I ran
into this fun build error.
CC net/ipv6/inet6_connection_sock.o
.../net/ipv6/inet6_connection_sock.c: In function ‘inet6_csk_bind_conflict’:
.../net/ipv6/inet6_connection_sock.c:37:12: error: incompatible types when initializing type ‘int’ using
type ‘kuid_t’
.../net/ipv6/inet6_connection_sock.c:54:30: error: incompatible type for argument 1 of ‘uid_eq’
.../include/linux/uidgid.h:48:20: note: expected ‘kuid_t’ but argument is of type ‘int’
make[3]: *** [net/ipv6/inet6_connection_sock.o] Error 1
make[2]: *** [net/ipv6] Error 2
make[2]: *** Waiting for unfinished jobs....
Using kuid_t instead of int to hold the uid fixes this.
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
v3: make pktgen_threads list per-namespace
v2: remove a useless check
This patch add net namespace to pktgen, so that
we can use pktgen in different namespaces.
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The standard mandates mesh STAs to set the ERP Short Slot
Time capability info bit in beacons to 0. Even though this
is their way of disallowing short slot time for mesh STAs,
there should be no harm in enabling it if we determine all
STAs in the current MBSS support ERP rates.
Increases throughput about 20% for legacy rates when
enabled.
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After removing the unneeded linux/i2c.h, linux/of.h was needed for
of_machine_is_compatible(). i2c.h had included of.h.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Cleanup the format of ethoc.c to meet network driver style as
per checkpatch.pl.
Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A GRE tunnel can be configured so that outgoing tunnel packets inherit
the value of the TOS field from the inner IP header. In doing so, when
a non-IP packet is transmitted through the tunnel, the TOS field will
always be set to 0.
Instead, the user should be able to configure a different TOS value as
the fallback to use for non-IP packets. This is helpful when the non-IP
packets are all control packets and should be handled by routers outside
the tunnel as having Internet Control precedence. One example of this is
the NHRP packets that control a DMVPN-compatible mGRE tunnel; they are
encapsulated directly by GRE and do not contain an inner IP header.
Under the existing behavior, the IFLA_GRE_TOS parameter must be set to
'1' for the TOS value to be inherited. Now, only the least significant
bit of this parameter must be set to '1', and when a non-IP packet is
sent through the tunnel, the upper 6 bits of this same parameter will be
copied into the TOS field. (The ECN bits get masked off as before.)
This behavior is backwards-compatible with existing configurations and
iproute2 versions.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some usecase when lifetime of ipv4 addresses might be helpful.
For example:
1) initramfs networkmanager uses a DHCP daemon to learn network
configuration parameters
2) initramfs networkmanager addresses, routes and DNS configuration
3) initramfs networkmanager is requested to stop
4) initramfs networkmanager stops all daemons including dhclient
5) there are addresses and routes configured but no daemon running. If
the system doesn't start networkmanager for some reason, addresses and
routes will be used forever, which violates RFC 2131.
This patch is essentially a backport of ivp6 address lifetime mechanism
for ipv4 addresses.
Current "ip" tool supports this without any patch (since it does not
distinguish between ipv4 and ipv6 addresses in this perspective.
Also, this should be back-compatible with all current netlink users.
Reported-by: Pavel Šimerda <psimerda@redhat.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch: "ARM: use common irqchip_init for GIC init"
(sha1: 0529e315bb)
should also add linux/irqchip.h header.
Error message:
arch/arm/mach-zynq/common.c:99:14: error: 'irqchip_init'
undeclared here (not in a function)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Jesper Dangaard Brouer says:
====================
This patchset is V2, with some trivial code fixes, which were noticed
by DaveM. It is still a partly respin of my fragmentation optimization
patches: http://thread.gmane.org/gmane.linux.network/250914
This is not the complete patchset, from the gmane link above. In this
patchset, I primarily focus on adjusting cacheline for better SMP/NUMA
performance.
Once this patchset have been agreed upon, I will continue and respin
the rest of my patches.
This time around, I have created a frag DoS generator, via the tool
trafgen (http://netsniff-ng.org/). To create a stable DoS scenario
(no longer relying on frame dropping due to disabled flow-control).
Two 10G interfaces are under-test, and uses Ethernet flow-control. A
third interface is used for generating the DoS attack (this interface
is also 10G, but it does not need to be, as 500Kpps DoS is enough).
Test types summary (netperf):
Test-20G64K == 2x10G with 65K fragments
Test-20G3F == 2x10G with 3x fragments (3*1472 bytes)
Test-20G64K+DoS == Same as 20G64K with frag DoS
Test-20G3F+DoS == Same as 20G3F with frag DoS
Patch list:
Patch-01 - net: cacheline adjust struct netns_frags for better frag performance
Patch-02 - net: cacheline adjust struct inet_frags for better frag performance
Patch-03 - net: cacheline adjust struct inet_frag_queue
Patch-04 - net: frag helper functions for mem limit tracking
Patch-05 - net: use lib/percpu_counter API for fragmentation mem accounting
Patch-06 - net: frag, move LRU list maintenance outside of rwlock
Performance table summary:
Test-type: Test-20G64K Test-20G3F 20G64K+DoS 20G3F+DoS
---------- ----------- ---------- ---------- ---------
net-next: 15114.5 Mbit/s 8954.21 2444.28 3918.01 Mbit/s
Patch-01: 16075.8 Mbit/s 8976.18 2621.49 4072.79 Mbit/s
Patch-02: 17806.9 Mbit/s 9280.32 2478.62 4274.59 Mbit/s
Patch-03: 17317.4 Mbit/s 9308.62 2546.05 4336.59 Mbit/s
Patch-04: 17635.9 Mbit/s 9256.16 2535.25 4327.63 Mbit/s
Patch-05: 18027.0 Mbit/s 9918.99 2492.62 3621.68 Mbit/s
Patch-06: 18486.7 Mbit/s 10723.20 3657.85 4560.64 Mbit/s
I cannot explain the under-DoS regression that patch-05/percpu_counter
introduces. But patch-06/LRU-lock corrects the situation again.
Below is a testlab setup description, with links to the trafgen DoS
packet config used.
Testlab
=======
Server setup
------------
The machine acting as a server:
- 2x CPU (E5-2630)
- Thus a NUMA arch/machine
- 4x 10Gbit/s ports
- NICs 2x Intel Dual port 82599 based (driver ixgbe)
Setup:
- Interfaces uses Ethernet flow control
- Flush all iptables
- Remove all iptables related module.
- Kill irqbalance
- Pin each 10G NIC port to a *single* CPU each
Pinning can easily be done by command hacks::
for x in /proc/irq/*/eth8*/../smp_affinity_list ; do echo 1 > $x; done
for x in /proc/irq/*/eth9*/../smp_affinity_list ; do echo 3 > $x; done
for x in /proc/irq/*/eth31*/../smp_affinity_list; do echo 6 > $x; done
for x in /proc/irq/*/eth32*/../smp_affinity_list; do echo 8 > $x; done
Notice NUMA setting: The CPU to NIC tying is carefully choosen
according to the NUMA node setup. Thus, NICs connected to a PCI-e
slot that is connected to a physical CPU socket are tied together.
Choosing only a single CPU per NIC (port) is just to ease provoking
and debugging this performance issue. (In real setups, you can choose
more CPU, just remember the NUMA node in the equation).
Tools
-----
Netperf is used, with option -T to ensure CPU binding.
The netserver processes, are NAPI pinned::
numactl -m0 -c0 netserver
numactl -m1 -c 1 netserver -p 1337
I now have a frag DoS generator, created via the tool:
trafgen (see: http://netsniff-ng.org/)
Trafgen packet config file:
http://people.netfilter.org/hawk/frag_work/trafgen/frag_packet03_small_frag.txf
Notice, I'm using features of trafgen, recently developed by Daniel
Borkmann, thus you need the latest git tree to use my trafgen packet
config.
git://github.com/borkmann/netsniff-ng.git
Command line:
trafgen --dev eth51 --conf frag_packet03_small_frag.txf -V -k 100 --cpus 2
Tests types
-----------
Test(20G64K) UDP-64K 2x 10Gbit/s with no DoS traffic:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export SIZE=$((65507)); export TIME=$((20)); export LOG=/tmp/netperf.log ;\
netperf -p 1337 -H 192.168.31.2 -T7,7 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.31 &\
netperf -H 192.168.81.2 -T2,2 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.81 && \
wait $! && tail -n3 ${LOG}.* && \
tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}'
Test(20G3F) UDP-3xfrags 2x 10Gbit/s with no DoS traffic:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export SIZE=$((3*1472)); export TIME=$((20)); export LOG=/tmp/netperf.log ;\
netperf -p 1337 -H 192.168.31.2 -T7,7 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.31 &\
netperf -H 192.168.81.2 -T2,2 -t UDP_STREAM -l $TIME -- -m $SIZE >> ${LOG}.81 && \
wait $! && tail -n3 ${LOG}.* && \
tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}'
Awk script for summming results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tail -n3 ${LOG}.{31,81} | awk 'BEGIN{sum=0;} /212992 / {sum+=$4; print " +"$4} /==/ {print " file:"$2} END{print "sum:"sum" Mbit/s"}'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- add missing gpio interrupt lines to dove dt
- fix bad logic for printing MPP error message on orion boards
- build proper serial port driver after changing mvebu DT compatible property
- This is a change to mvebu_defconfig that I wouldn't usually push out as a
fix. However, the commit
b24212f arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
changed the serial driver for the board in the dts file. without the patch
I've included in this pull, users won't see any log messages.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRB+cvAAoJEAi3KVZQDZAej/MH/2eWE2N3eTs8PRshCUoEIQxd
4uConsKhPiIyNK1rHePGI4EY/M07yxYRO7/55ajK5J3NiqxO7N8n0RYIMFsgNoC9
LCPpi2Ts6Rpj87jqj7ION6pfCiIDPE+Lj4hNQAVTuQAMrh04UqaDLHwpfQztETxW
C6X9A8ae+fVFfVQN0AusStImklxv5hf4odUhqvSKd6gy6n20KtV4EQQN+t+OLSgx
IsRUVww6cfqYFNYDWhyWg8SLppIp9m44hluS8f/wPT9zh5Wf6XWnvAZz41cqaf44
FpzURzHQGcmetqPv/MWL9YSCMTSmBxLfW4totTq2wgldl6qQc7bJsF3R0HlsUgc=
=EA67
-----END PGP SIGNATURE-----
Merge tag 'mvebu_fixes_for_v3.8-rc6' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper:
fixes for v3.8-rc6
- add missing gpio interrupt lines to dove dt
- fix bad logic for printing MPP error message on orion boards
- build proper serial port driver after changing mvebu DT compatible property
- This is a change to mvebu_defconfig that I wouldn't usually push out as a
fix. However, the commit
b24212f arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
changed the serial driver for the board in the dts file. without the patch
I've included in this pull, users won't see any log messages.
* tag 'mvebu_fixes_for_v3.8-rc6' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: i2c come back in defconfig
arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
Dove: activate GPIO interrupts in DT
Updating the fragmentation queues LRU (Least-Recently-Used) list,
required taking the hash writer lock. However, the LRU list isn't
tied to the hash at all, so we can use a separate lock for it.
Original-idea-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the per network namespace shared atomic "mem" accounting
variable, in the fragmentation code, with a lib/percpu_counter.
Getting percpu_counter to scale to the fragmentation code usage
requires some tweaks.
At first view, percpu_counter looks superfast, but it does not
scale on multi-CPU/NUMA machines, because the default batch size
is too small, for frag code usage. Thus, I have adjusted the
batch size by using __percpu_counter_add() directly, instead of
percpu_counter_sub() and percpu_counter_add().
The batch size is increased to 130.000, based on the largest 64K
fragment memory usage. This does introduce some imprecise
memory accounting, but its does not need to be strict for this
use-case.
It is also essential, that the percpu_counter, does not
share cacheline with other writers, to make this scale.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change is primarily a preparation to ease the extension of memory
limit tracking.
The change does reduce the number atomic operation, during freeing of
a frag queue. This does introduce a some performance improvement, as
these atomic operations are at the core of the performance problems
seen on NUMA systems.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fragmentation code cacheline adjusting of struct inet_frag_queue.
Take advantage of the size of struct timer_list, and move all but
spinlock_t lock, below the timer struct. On 64-bit 'lru_list',
'list' and 'refcnt', fits exactly into the next cacheline, and a
new cacheline starts at 'fragments'.
The netns_frags *net pointer is moved to the end of the struct,
because its used in a compare, with "next/close-by" elements of
which this struct is embedded into.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The globally shared rwlock, of struct inet_frags, shares
cacheline with the 'rnd' number, which is used by the hash
calculations. Fix this, as this obviously is a bad idea, as
unnecessary cache-misses will occur when accessing the 'rnd'
number.
Also small note that, moving function ptr (*match) up in struct,
is to avoid it lands on the next cacheline (on 64-bit).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This small cacheline adjustment of struct netns_frags improves
performance significantly for the fragmentation code.
Struct members 'lru_list' and 'mem' are both hot elements, and it
hurts performance, due to cacheline bouncing at every call point,
when they share a cacheline. Also notice, how mem is placed
together with 'high_thresh' and 'low_thresh', as they are used in
the compare operations together.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
just as it should have been. It also helps
removing the, now unnecessary, workqueue.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The irqs available on the machine and even the bit settings in the
irq registers differ a lot through all the s3c24xx subarchitectures.
This results in each subarch having its own irq init which adds its
specific irqs to the base ones created in plat-s3c24xx/irq.c.
This of course makes a future move to devicetree hard to implement.
Therefore this patch transforms the base irq handling to a declarative
style, where the irq types as well as its parent/child relationship
gets read from a predefined datastructure, which later on can hopefully
be easily represented in devicetree too.
It should also be easy to include the subarch specific irqs here
in later patches, reducing code size and duplication.
It should not affect anything outside of the file, as the original
irq numbers and their handling are preserved (hopefully) correctly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
From Kukjin Kim:
This fixes compatible values for exynos pinctrl and crash on soft reset,
tick and alarm irq numbers on exynos5440 and uninitialized variable on
s3c24xx.
* 'v3.8-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
ARM: dts: fix tick and alarm irq numbers for exynos5440
ARM: dts: fix compatible value for exynos pinctrl
ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
ARM: S3C24XX: fix uninitialized variable warning
Signed-off-by: Olof Johansson <olof@lixom.net>
As the wdt nodes have the gic as their interrupt-parent, their
interrupts property should be 3 cells in format described in the gic
devicetree binding document.
This patch fixes the interrupts property in the wdt nodes to be in the
correct format.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
